AVSPARE.COM
parts catalog

524-8604 EXTENSION GP-BLADE S/N B9L1-UP BLADE ATTACHMENT KIT 160M MOTOR GRADER




WORK TOOLS

BLADE GP
 

#SEBP43021530
 

524-8604: EXTENSION GP-BLADE

524-8604 EXTENSION GP-BLADE
S/N B9L1-UP
BLADE ATTACHMENT KIT
i06921596 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  452-3137 [1] ANGLE AS  
  2A-1538 [2] BOLT (3/4-10X2.25-IN)  
  5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
  5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
  3G-2165 [1] EDGE-CUTTING  
  133-7524 [1] EXTENSION  
  2J-3506 [15] NUT-FULL (3/4-10-THD)  
  452-3134 [1] PLATE AS  
  110-5334 [3] SPACER (3-MM THK)  
  176-5642 [1] SPACER (2-MM THK)  
  176-5643 [2] SPACER (1-MM THK)  
  2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
 

#SEBP43021531
 

524-8605: EXTENSION GP-BLADE

524-8605 EXTENSION GP-BLADE
S/N B9L1-UP
BLADE ATTACHMENT KIT
i06922047 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  110-5336 [1] ANGLE AS  
  2A-1538 [2] BOLT (3/4-10X2.25-IN)  
  5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
  5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
  232-2146 [1] EDGE-CUTTING  
  243-6683 [1] EXTENSION  
  2J-3506 [15] NUT-FULL (3/4-10-THD)  
  243-6684 [1] PLATE AS  
  110-5334 [2] SPACER (3-MM THK)  
  176-5642 [1] SPACER (2-MM THK)  
  176-5643 [2] SPACER (1-MM THK)  
  2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
 

#SEBP43021532
 

524-8606: EXTENSION GP-BLADE

524-8606 EXTENSION GP-BLADE
S/N B9L1-UP
BLADE ATTACHMENT KIT
i06922175 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  110-5336 [1] ANGLE AS  
  2A-1538 [2] BOLT (3/4-10X2.25-IN)  
  5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
  5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
  3G-2165 [1] EDGE-CUTTING  
  133-7523 [1] EXTENSION  
  2J-3506 [15] NUT-FULL (3/4-10-THD)  
  176-5639 [1] PLATE AS  
  110-5334 [3] SPACER (3-MM THK)  
  176-5642 [1] SPACER (2-MM THK)  
  176-5643 [2] SPACER (1-MM THK)  
  2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
 

#SEBP43021533
 

8W-3330: EXTENSION GP-BLADE

8W-3330 EXTENSION GP-BLADE -RH
S/N B9L1-UP
2-FT
i00122503 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-5108 [6] BOLT-PLOW (5/8-11X2.25-IN)  
2. 4K-0367 [16] NUT-FULL (5/8-11-THD)  
3. 176-5641 [1] PLATE AS  
4. 4F-3658 [10] BOLT-PLOW (5/8-11X3-IN)  
5. 8W-2214 [1] EXTENSION  
6. 9W-1835 [1] EDGE-CUTTING  
7. 9B-1565 [2] SPACER (3-MM THK)  
8. 6D-7563 [1] ANGLE AS  
9. 9X-8880 [2] BOLT (5/8-11X2-IN)  
10. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
11. 176-5642 B [1] SPACER (2-MM THK)  
12. 176-5643 B [2] SPACER (1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP43021534
 

8W-3332: EXTENSION GP-BLADE

8W-3332 EXTENSION GP-BLADE -LH
S/N B9L1-UP
2-FT
i00122504 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-5108 [6] BOLT-PLOW (5/8-11X2.25-IN)  
2. 4K-0367 [16] NUT-FULL (5/8-11-THD)  
3. 176-5640 [1] PLATE AS  
4. 4F-3658 C [10] BOLT-PLOW (5/8-11X3-IN)  
5. 8W-2213 [1] EXTENSION (LH)  
6. 9W-1835 C [1] EDGE-CUTTING  
7. 9B-1565 [2] SPACER (3-MM THK)  
8. 6D-7564 [1] ANGLE AS  
9. 9X-8880 [2] BOLT (5/8-11X2-IN)  
10. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
11. 176-5643 B [2] SPACER (1-MM THK)  
12. 176-5642 B [1] SPACER (2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP43021535
 

261-8536: LIFT GP-BLADE

261-8536 LIFT GP-BLADE
S/N B9L1-407
PART OF 234-7718 COMMON AR
i02248688 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)  
2. 7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)  
3. 7D-8879 B [8] SHIM (0.127-MM THK)  
4. 7D-8881 B [6] SHIM (0.254-MM THK)  
5. 7D-8882 B [2] SHIM (0.508-MM THK)  
6. 8D-4336 B [2] WASHER-THRUST (76.6X146X1.90-MM THK)  
7. 8X-5106 [1] STUD-BALL  
8. 8X-5107 [1] PIN  
9. 8X-5109 [1] BAR AS  
  8X-5108 [2] BUSHING  
  124-5836 [5] BUSHING  
10. 123-8187 B [2] WASHER-THRUST (76.6X146X1-MM THK)  
11. 201-8034 M [6] BOLT (M20X2.5X120-MM)  
12. 259-2627 M [4] BOLT (M12X1.75X40-MM)  
13. 259-4483 [2] PIN  
14. 259-4492 [2] LOCK  
15. 261-8537 [1] ARM AS (LH)  
  7D-8889 [1] BEARING (76.35-MM ID)  
  8D-8168 [1] BEARING (63.65-MM ID)  
16. 261-8538 [1] ARM AS (RH)  
  7D-8889 [1] BEARING (76.35-MM ID)  
  8D-8168 [1] BEARING (63.65-MM ID)  
17. 261-8541 [2] YOKE AS  
  2G-8233 [1] RING  
18. 261-8543 [2] RETAINER  
19. 261-8545 [1] PLATE  
20. 261-8547 [2] LOCK  
21. 288-0735 M [1] BOLT (M12X1.75X60-MM)  
22. 112-3926 M [4] BOLT (M20X2.5X110-MM)  
23. 267-3508 [16] WASHER-HARD (22X35X3.5-MM THK)  
24. 279-6632 [5] WASHER (13.5X25.5X3-MM THK)  
25. 286-0742 M [6] NUT (M20X2.5-THD)  
26. 3P-1461 [4] SEAL-LIP TYPE  
27. 5F-0149 [2] SEAL-O-RING  
28. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)  
29. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)  
30. 7D-8883 [2] SEAL  
31. 7D-8884 [2] SEAL  
32. 7H-2444 [2] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP43021536
 

296-3008: LIFT GP-BLADE

296-3008 LIFT GP-BLADE
S/N B9L408-506
PART OF 234-7718, 349-2553 COMMON AR
i03473775 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)  
2. 7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)  
3. 7D-8879 B [8] SHIM (0.127-MM THK)  
4. 7D-8881 B [6] SHIM (0.254-MM THK)  
5. 7D-8882 B [2] SHIM (0.508-MM THK)  
6. 8D-4336 B [2] WASHER-THRUST (76.6X146X1.90-MM THK)  
7. 8X-5106 [1] STUD-BALL  
8. 8X-5107 [1] PIN  
9. 381-0356 [1] BAR AS-LINK  
9A. 8X-5108 [2] BUSHING  
9B. 382-4604 [7] BUSHING  
10. 123-8187 B [6] WASHER-THRUST (76.6X146X1-MM THK)  
11. 201-8034 M [6] BOLT (M20X2.5X120-MM)  
12. 8T-0558 M [4] BOLT-SELF-LOCKING (M12X1.75X50-MM)  
13. 259-4483 [2] PIN  
14. 259-4492 [2] LOCK  
15. 296-3004 [1] ARM AS-LIFT (LH)  
15A. 7D-8889 [1] BEARING (76.35-MM ID)  
15B. 8D-8168 [1] BEARING (63.65-MM ID)  
16. 296-3005 [1] ARM AS-LIFT (RH)  
16A. 7D-8889 [1] BEARING (76.35-MM ID)  
16B. 8D-8168 [1] BEARING (63.65-MM ID)  
17. 261-8541 [2] YOKE AS  
    (EACH INCLUDES)
  2G-8233 [1] RING  
18. 261-8543 [2] RETAINER  
19. 261-8545 [1] PLATE  
20. 261-8547 [2] LOCK  
21. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
22. 112-3926 M [4] BOLT (M20X2.5X110-MM)  
23. 8T-4123 [16] WASHER (22X35X3.5-MM THK)  
24. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4131 M [6] NUT (M20X2.5-THD)  
26. 3P-1461 [4] SEAL-LIP TYPE  
27. 5F-0149 [2] SEAL-O-RING  
28. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)  
29. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)  
30. 7D-8883 [2] SEAL  
31. 7D-8884 [2] SEAL  
32. 7H-2444 [2] SEAL-O-RING  
33. 198-4778 [4] WASHER-HARD (13.5X30X12-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP43021537
 

293-5556: LIFT GP-WORK TOOL

293-5556 LIFT GP-WORK TOOL
S/N B9L1-UP
PART OF 312-2204 LIFT GP-WORK TOOL
i02628517 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1F-6762 [4] BOLT (1-1/2-12X4.5-IN)  
2. 2K-7468 [1] LOCKNUT (1-1/4-12-THD)  
3. 3B-8489 [11] FITTING-GREASE (1/8-27 PTF)  
4. 4H-6511 [1] BOLT (1-1/4-12X6.5-IN)  
5. 5F-9891 [4] BOLT (1-1/2-12X6-IN)  
6. 9X-2521 [8] NUT-FULL  
7. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
8. 170-4910 [1] FRAME AS-COUPLER  
9. 172-8121 [2] SPACER (34.925X60.325X14.2-MM THK)  
10. 172-8122 [2] PIN AS  
11. 172-8125 [3] PIN (SNAP)  
12. 172-8126 [1] FILM-WARNING (CRUSH HAZARD)  
13. 172-8127 [1] PIN AS (LOCKING)  
14. 172-8287 I [1] HOSE AS  
15. 172-8288 I [1] HOSE AS  
16. 194-3655 [2] BEARING GP  
    (EACH INCLUDES)
16A. 2D-8652 [1] BEARING  
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
  194-3649 [1] BLOCK-BEARING  
17. 195-3330 [1] PLATE AS-MOUNTING  
17A. 9S-4190 [4] PLUG-O-RING (7/8-14-THD)  
17B. 9S-4191 [6] PLUG (9/16-18-THD)  
17C. 171-1301 [2] PLATE-STOP  
17D. 194-3654 [2] BLOCK  
17E. 236-2493 [2] BLOCK-HYDRAULIC  
17F. 236-4243 [2] PLATE  
18. 217-3501 Y [1] CYLINDER GP-HYDRAULIC (WORK TOOL LIFT)  
19. 284-7971 [1] ARM AS (LOWER)  
20. 284-7972 [1] ARM AS (UPPER)  
22. 2M-9780 [4] SEAL-O-RING  
23. 3J-1907 [4] SEAL-O-RING  
24. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 6V-8397 [4] SEAL-O-RING  
26. 6V-8636 [1] CONNECTOR  
27. 6V-8724 [3] ELBOW (90-DEG)  
28. 1D-4566 [4] BOLT (1/2-13X3.5-IN)  
   
  293-5559 FY [1] BRACE GP (WORK TOOL LIFT)  
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP43021538
 

312-2204: LIFT GP-WORK TOOL

312-2204 LIFT GP-WORK TOOL
S/N B9L1-UP
CANNOT BE USED WITH @@@@@250-3071@@@@@, @@@@@351-5178@@@@@
i02760043 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  293-5556 Y [1] LIFT GP-WORK TOOL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP43021539
 

275-5877: LINK GP-LIFT

275-5877 LINK GP-LIFT -SNOW WING
S/N B9L1-UP
PART OF 275-5904, 275-5908 BLADE & MTG GP-SNOW, 275-5902 MOUNTING GP-SNOW WING
i03343499 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-5997 [5] LOCKNUT (1-1/4-7-THD)  
2. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
3. 277-3810 [1] LINK AS  
4. 277-3811 Y [1] CYLINDER GP-HYDRAULIC (SNOW WING)  
5. 277-3812 [1] LINK AS  
6. 277-3813 [1] LINK GP-LIFT  
6A. 201-8034 M [1] BOLT (M20X2.5X120-MM)  
6B. 6V-7688 M [1] LOCKNUT (M20X2.5-THD)  
6C. 277-3814 [1] TUBE AS  
6D. 277-3815 [1] TUBE AS  
7. 299-7351 [3] BOLT (1-1/4-7X4-IN)  
8. 7X-0429 [2] BOLT (1-1/4-7X4.5-IN)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Moldboard Blade
160M Motor Grader
Special Instruction
Installation instructions for the 275-5896 Snow Wing Lines and Mounting Gp On Certain Motor Graders{6158, 6159}
Installation instructions for the 275-5896 Snow Wing Lines and Mounting Gp On Certain Motor Graders{6158, 6159}
Installation Instructions for the <NOBR>275-5891</NOBR> Snow Wing Lines and Mounting Gp On Certain Motor Graders {6158, 6159}
Installation Instructions for the 275-5891 Snow Wing Lines and Mounting Gp On Certain Motor Graders {6158, 6159}
Installation Instructions for the <NOBR>275-5885</NOBR> Mounting Bracket As On Certain Motor Graders {6158, 6159}
Installation Instructions for the 275-5885 Mounting Bracket As On Certain Motor Graders {6158, 6159}
Specifications
Blade Lift
120M, 12M, 140M and 160M Motor Graders Machine Systems
Blade Lift
120M, 12M, 140M and 160M Motor Graders Machine Systems
Systems Operation
Blade Cushion - If Equipped
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Troubleshooting
MID 082 - CID 0908 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 0908 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 3694 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 3694 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
Disassembly and Assembly
Blade - Remove and Install
160M Motor Grader Machine Systems
Blade Lift Arm - Remove
160M Motor Grader Machine Systems
Blade Lift Arm - Install
160M Motor Grader Machine Systems
Service Magazine
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
A New Moldboard Mounting Bracket is Now Available On Certain M Series Motor Graders {6151, 6152, 6154, 6155}
A New Moldboard Mounting Bracket is Now Available On Certain M Series Motor Graders {6151, 6152, 6154, 6155}
A Choke Check Valve Can Be Added to Improve Mastless Snow Wing Downward Blade Movement on Certain Motor Graders {6158}
A Choke Check Valve Can Be Added to Improve Mastless Snow Wing Downward Blade Movement on Certain Motor Graders {6158}

Caterpillar Parts SIS Catalog 160M :

Truck sale:

207,000 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
173,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
209,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
204,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
217,000 
Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.