276-8398 PUMP GP-FUEL INJECTION S/N C6E1-UP PART OF 282-3232, 303-2929 PUMP GP-FUEL INJECTION 120M MOTOR GRADER

276-8398: PUMP GP-FUEL INJECTION

276-8398 PUMP GP-FUEL INJECTION
S/N C6E1-UP
PART OF 282-3232, 303-2929 PUMP GP-FUEL INJECTION

Parts for your 120M MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	228-7100	[1]	SEAL-O-RING
2.	238-0120	[1]	SENSOR GP-SPEED (SECONDARY, TIMING)
3.	247-6019	[1]	SEAL-O-RING
4.	248-1066	[1]	FITTING-FUEL
5.	293-0249	[1]	PUMP GP-FUEL TRANSFER
6.	117-1385	[1]	SEAL-O-RING
7.	5A-3604 M	[5]	BOLT-SOCKET HEAD (M8X1.25X25-MM)
8.	6D-7889	[1]	SEAL-O-RING
9.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
	M		METRIC PART

282-3232: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

282-3232 PUMP GP-FUEL INJECTION
S/N C6E1-440
PART OF 257-8006, 264-0593 ENGINE AR-PRIMARY
Type 1

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1N-3361 C	[1]	SPACER
2.	6I-0217 CM	[6]	BOLT (M8X1.25X20-MM)
3.	6I-0254 M	[3]	BOLT (M8X1.25X30-MM)
4.	6I-0260 M	[4]	BOLT (M8X1.25X25-MM)
5.	6I-0456 CM	[4]	BOLT (M8X1.25X45-MM)
6.	6I-4793 CM	[3]	BOLT (M8X1.25X50-MM)
7.	7W-2632	[1]	WASHER (8.5X16.8X1.6-MM THK)
8.	155-0576	[8]	MOUNT-ISOLATION
9.	216-9752	[2]	WASHER
10.	217-0099 C	[4]	SPACER (8.2X25X2-MM THK)
11.	225-8524	[1]	BOLT-SPECIAL
12.	230-8989	[1]	GEAR-FUEL PUMP (68-TEETH)
13.	232-3149	[6]	WASHER (8.35X16.85X1.55-MM THK)
14.	241-4291 C	[3]	SCREW
15.	268-6677 C	[1]	BRACKET AS
	260-3718	[1]	BRACKET
15A.	260-3939 M	[1]	SCREW-HEX HEAD (M6X1X25-MM)
16.	268-6678 C	[1]	BRACKET AS
	260-3719	[1]	BRACKET
16A.	260-3939 M	[1]	SCREW-HEX HEAD (M6X1X25-MM)
17.	290-3910	[1]	LINE-FUEL INJECTION
18.	278-5168	[6]	CLAMP-INJECTOR
19.	278-5170	[6]	BOLT
20.	278-5180	[2]	CLIP
21.	278-5189	[1]	TUBE AS
22.	278-5201	[1]	CONNECTION
23.	278-5202	[2]	SEAL-O-RING
24.	278-5203	[4]	SPACER
25.	278-5209	[1]	BRACKET
26.	278-5210	[1]	BOLT
28.	278-5225	[1]	KIT-SENSOR (ENGINE OIL PRESSURE)
28A.	278-5226	[1]	SEAL-O-RING
29.	278-5228	[1]	KIT-SENSOR (ENGINE SPEED)
29A.	278-5227	[1]	SEAL-O-RING
30.	278-5272	[1]	KIT-SENSOR (INTAKE AIR TEMPERATURE)
30A.	278-5226	[1]	SEAL-O-RING
31.	278-5273	[1]	KIT-SENSOR (AIR PRESSURE)
31A.	199-9252	[1]	SEAL-O-RING
32.	278-5307	[1]	KIT-SENSOR (COOLANT TEMPERATURE)
32A.	199-9267	[1]	SEAL-O-RING
33.	278-5308	[1]	KIT-SENSOR (FUEL RAIL PRESSURE)
33A.	278-5309	[1]	WASHER
34.	280-1889	[3]	CLAMP
35.	280-1890	[3]	CLAMP
36.	280-1891	[3]	ISOLATOR
37.	282-3233	[1]	BRACKET
38.	290-3911	[1]	LINE-FUEL INJECTION (CYL NO. 1)
39.	290-3912	[1]	LINE-FUEL INJECTION (CYL NO. 2)
40.	290-3913	[1]	LINE-FUEL INJECTION (CYL NO. 3)
41.	290-3914	[1]	LINE-FUEL INJECTION (CYL NO. 4)
42.	290-3915	[1]	LINE-FUEL INJECTION (CYL NO. 5)
43.	290-3916	[1]	LINE-FUEL INJECTION (CYL NO. 6)
44.	287-6838 C	[1]	BRACKET
45.	287-6839 C	[2]	BOLT
46.	276-8398 CY	[1]	PUMP GP-FUEL INJECTION
47.	286-3683 C	[1]	CONTROL GP-UNPROGRAMMED
48.	282-0490 CY	[6]	INJECTOR GP-FUEL
49.	265-8125 C	[1]	RAIL AS-FUEL
50.	293-9901 C	[1]	BRACKET
51.	101-3895 M	[1]	BOLT (M8X1.25X35-MM)

	278-4138 F	[5]	KIT-FUEL LINE PROTECTION
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

282-3232: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

282-3232 PUMP GP-FUEL INJECTION
S/N C6E1-440
PART OF 264-0593 ENGINE AR-PRIMARY
Type 2

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	300-2940 C	[1]	BRACKET
2.	6I-0217 M	[6]	BOLT (M8X1.25X20-MM)
3.	6I-0254 CM	[4]	BOLT (M8X1.25X30-MM)
4.	6I-0260 M	[4]	BOLT (M8X1.25X25-MM)
5.	6I-0456 M	[4]	BOLT (M8X1.25X45-MM)
6.	6I-4793 CM	[1]	BOLT (M8X1.25X50-MM)
7.	7W-2632	[1]	WASHER (8.5X16.8X1.6-MM THK)
8.	155-0576	[8]	MOUNT-ISOLATION
9.	216-9752	[2]	WASHER
10.	217-0099	[4]	SPACER (8.2X25X2-MM THK)
11.	225-8524	[1]	BOLT-SPECIAL
12.	230-8989	[1]	GEAR-FUEL PUMP (68-TEETH)
13.	232-3149	[6]	WASHER (8.35X16.85X1.55-MM THK)
14.	241-4291 C	[4]	SCREW
15.	268-6677	[1]	BRACKET AS
	260-3718	[1]	BRACKET
15A.	260-3939 M	[1]	SCREW-HEX HEAD (M6X1X25-MM)
16.	268-6678	[1]	BRACKET AS
	260-3719	[1]	BRACKET
16A.	260-3939 M	[1]	SCREW-HEX HEAD (M6X1X25-MM)
17.	290-3910	[1]	LINE-FUEL INJECTION
18.	278-5168	[6]	CLAMP-INJECTOR
19.	278-5170	[6]	BOLT
20.	278-5180	[2]	CLIP
21.	278-5189	[1]	TUBE AS
22.	278-5201	[1]	CONNECTION
23.	278-5202	[2]	SEAL-O-RING
24.	278-5203	[4]	SPACER
25.	278-5209	[1]	BRACKET
26.	278-5210	[1]	BOLT
28.	278-5225	[1]	KIT-SENSOR (ENGINE OIL PRESSURE)
28A.	278-5226	[1]	SEAL-O-RING
29.	278-5228	[1]	KIT-SENSOR (ENGINE SPEED)
29A.	278-5227	[1]	SEAL-O-RING
30.	278-5272	[1]	KIT-SENSOR (INTAKE AIR TEMPERATURE)
30A.	278-5226	[1]	SEAL-O-RING
31.	278-5273	[1]	KIT-SENSOR (AIR PRESSURE)
31A.	199-9252	[1]	SEAL-O-RING
32.	278-5307	[1]	KIT-SENSOR (COOLANT TEMPERATURE)
32A.	199-9267	[1]	SEAL-O-RING
33.	278-5308	[1]	KIT-SENSOR (FUEL RAIL PRESSURE)
33A.	278-5309	[1]	WASHER
34.	280-1889 C	[4]	CLAMP
35.	280-1890 C	[4]	CLAMP
36.	280-1891 C	[4]	ISOLATOR
37.	282-3233	[1]	BRACKET
38.	290-3911	[1]	LINE-FUEL INJECTION (CYL NO. 1)
39.	290-3912	[1]	LINE-FUEL INJECTION (CYL NO. 2)
40.	290-3913	[1]	LINE-FUEL INJECTION (CYL NO. 3)
41.	290-3914	[1]	LINE-FUEL INJECTION (CYL NO. 4)
42.	290-3915	[1]	LINE-FUEL INJECTION (CYL NO. 5)
43.	290-3916	[1]	LINE-FUEL INJECTION (CYL NO. 6)
44.	287-6838	[1]	BRACKET
45.	287-6839	[2]	BOLT
46.	276-8398 Y	[1]	PUMP GP-FUEL INJECTION
47.	286-3683	[1]	CONTROL GP-UNPROGRAMMED
48.	282-0490 Y	[6]	INJECTOR GP-FUEL
49.	265-8125	[1]	RAIL AS-FUEL
50.	293-9901	[1]	BRACKET
51.	101-3895 M	[1]	BOLT (M8X1.25X35-MM)
52.	6I-4374 CM	[2]	BOLT (M8X1.25X60-MM)
53.	217-9039 C	[1]	STRAP-CABLE

	278-4138 F	[5]	KIT-FUEL LINE PROTECTION
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

303-2929: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

303-2929 PUMP GP-FUEL INJECTION
S/N C6E441-495
PART OF 257-8006, 264-0593 ENGINE AR-PRIMARY

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	276-8398 Y	[1]	PUMP GP-FUEL INJECTION
2.	230-8989	[1]	GEAR-FUEL PUMP (68-TEETH)
3.	6I-0260 M	[4]	BOLT (M8X1.25X25-MM)
4.	232-3149	[6]	WASHER (8.35X16.85X1.55-MM THK)
5.	282-3233	[1]	BRACKET
6.	287-6838	[1]	BRACKET
7.	101-3895 M	[1]	BOLT (M8X1.25X35-MM)
8.	6I-0217 M	[6]	BOLT (M8X1.25X20-MM)
9.	287-6839	[2]	BOLT
10.	265-8125	[1]	RAIL AS-FUEL
11.	300-2940	[1]	BRACKET
12.	6I-4374 M	[2]	BOLT (M8X1.25X60-MM)
13.	6I-4793 M	[1]	BOLT (M8X1.25X50-MM)
14.	217-9039	[1]	STRAP-CABLE
15.	290-3910	[1]	LINE-FUEL INJECTION
16.	280-1889	[4]	CLAMP
17.	280-1890	[4]	CLAMP
18.	280-1891	[4]	ISOLATOR
19.	241-4291	[4]	SCREW
20.	6I-0254 M	[4]	BOLT (M8X1.25X30-MM)
21.	292-3790 Y	[6]	INJECTOR GP-FUEL
22.	278-5168	[6]	CLAMP-INJECTOR
23.	278-5170	[6]	BOLT
24.	290-3911	[1]	LINE-FUEL INJECTION (CYL NO. 1)
25.	290-3912	[1]	LINE-FUEL INJECTION (CYL NO. 2)
26.	290-3913	[1]	LINE-FUEL INJECTION (CYL NO. 3)
27.	290-3914	[1]	LINE-FUEL INJECTION (CYL NO. 4)
28.	290-3915	[1]	LINE-FUEL INJECTION (CYL NO. 5)
29.	290-3916	[1]	LINE-FUEL INJECTION (CYL NO. 6)
30.	278-5180	[2]	CLIP
31.	292-0848	[1]	TUBE
32.	225-8524	[1]	BOLT-SPECIAL
33.	216-9752	[2]	WASHER
34.	286-3683	[1]	CONTROL GP-UNPROGRAMMED
35.	278-5201	[2]	CONNECTION
36.	278-5202	[2]	SEAL-O-RING
37.	6I-0456 M	[4]	BOLT (M8X1.25X45-MM)
38.	217-0099	[4]	SPACER (8.2X25X2-MM THK)
39.	155-0576	[8]	MOUNT-ISOLATION
40.	278-5203	[4]	SPACER
41.	7W-2632	[1]	WASHER (8.5X16.8X1.6-MM THK)
42.	293-9901	[1]	BRACKET
43.	268-6678	[1]	BRACKET AS
	260-3719	[1]	BRACKET
43A.	260-3939 M	[1]	SCREW-HEX HEAD (M6X1X25-MM)
44.	268-6677	[1]	BRACKET AS
	260-3718	[1]	BRACKET
44A.	260-3939 M	[1]	SCREW-HEX HEAD (M6X1X25-MM)
45.	278-5225	[1]	KIT-SENSOR (ENGINE OIL PRESSURE)
45A.	278-5226	[1]	SEAL-O-RING
46.	278-5228	[1]	KIT-SENSOR (ENGINE SPEED)
46A.	278-5227	[1]	SEAL-O-RING
47.	124-3815 M	[1]	BOLT (M8X1.25X16-MM)
48.	278-5272	[1]	KIT-SENSOR (AIR TEMPERATURE)
48A.	278-5226	[1]	SEAL-O-RING
49.	278-5273	[1]	KIT-SENSOR (AIR PRESSURE)
49A.	199-9252	[1]	SEAL-O-RING
50.	278-5307	[1]	KIT-SENSOR (WATER TEMPERATURE)
50A.	199-9267	[1]	SEAL-O-RING
51.	278-5308	[1]	KIT-SENSOR (FUEL RAIL PRESSURE)
51A.	278-5309	[1]	WASHER

	278-4138 F	[5]	KIT-FUEL LINE PROTECTION
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

303-2929: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

303-2929 PUMP GP-FUEL INJECTION
S/N C6E496-3159
PART OF 257-8006, 264-0593 ENGINE AR-PRIMARY

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	276-8398 Y	[1]	PUMP GP-FUEL INJECTION
2.	230-8989	[1]	GEAR-FUEL PUMP (68-TEETH)
3.	6I-0260 M	[4]	BOLT (M8X1.25X25-MM)
4.	232-3149	[6]	WASHER (8.35X16.85X1.55-MM THK)
5.	310-7918	[1]	BRACKET-SUPPORT
6.	287-6838	[1]	BRACKET
7.	101-3895 M	[1]	BOLT (M8X1.25X35-MM)
8.	6I-0217 M	[6]	BOLT (M8X1.25X20-MM)
9.	287-6839	[2]	BOLT
10.	308-8426	[1]	RAIL AS-FUEL
11.	300-2940	[1]	BRACKET
12.	6I-4374 M	[2]	BOLT (M8X1.25X60-MM)
13.	6I-4793 M	[1]	BOLT (M8X1.25X50-MM)
14.	217-9039	[1]	STRAP-CABLE
15.	290-3910	[1]	LINE-FUEL INJECTION
16.	280-1889	[4]	CLAMP
17.	280-1890	[4]	CLAMP
18.	280-1891	[4]	ISOLATOR
19.	241-4291	[4]	SCREW
20.	6I-0254 M	[4]	BOLT (M8X1.25X30-MM)
21.	292-3790 Y	[6]	INJECTOR GP-FUEL
22.	278-5168	[6]	CLAMP-INJECTOR
23.	278-5170	[6]	BOLT
24.	290-3911	[1]	LINE-FUEL INJECTION (CYL NO. 1)
25.	290-3912	[1]	LINE-FUEL INJECTION (CYL NO. 2)
26.	290-3913	[1]	LINE-FUEL INJECTION (CYL NO. 3)
27.	290-3914	[1]	LINE-FUEL INJECTION (CYL NO. 4)
28.	290-3915	[1]	LINE-FUEL INJECTION (CYL NO. 5)
29.	290-3916	[1]	LINE-FUEL INJECTION (CYL NO. 6)
30.	278-5180	[2]	CLIP
31.	292-0848	[1]	TUBE
32.	225-8524	[1]	BOLT-SPECIAL
33.	216-9752	[2]	WASHER
34.	286-3683	[1]	CONTROL GP-UNPROGRAMMED
35.	278-5201	[2]	CONNECTION
36.	278-5202	[2]	SEAL-O-RING
37.	6I-0456 M	[4]	BOLT (M8X1.25X45-MM)
38.	217-0099	[4]	SPACER (8.2X25X2-MM THK)
39.	155-0576	[8]	MOUNT-ISOLATION
40.	278-5203	[4]	SPACER
41.	7W-2632	[1]	WASHER (8.5X16.8X1.6-MM THK)
42.	293-9901	[1]	BRACKET
43.	268-6678	[1]	BRACKET AS
	260-3719	[1]	BRACKET
43A.	260-3939 M	[1]	SCREW-HEX HEAD (M6X1X25-MM)
44.	268-6677	[1]	BRACKET AS
	260-3718	[1]	BRACKET
44A.	260-3939 M	[1]	SCREW-HEX HEAD (M6X1X25-MM)
45.	278-5225	[1]	KIT-SENSOR (ENGINE OIL PRESSURE)
45A.	278-5226	[1]	SEAL-O-RING
46.	311-3858	[1]	KIT-SENSOR (ENGINE SPEED)
46A.	274-1639	[1]	SEAL
47.	124-3815 M	[1]	BOLT (M8X1.25X16-MM)
48.	278-5272	[1]	KIT-SENSOR (AIR TEMPERATURE)
48A.	278-5226	[1]	SEAL-O-RING
49.	278-5273	[1]	KIT-SENSOR (AIR PRESSURE)
49A.	199-9252	[1]	SEAL-O-RING
50.	278-5307	[1]	KIT-SENSOR (WATER TEMPERATURE)
50A.	199-9267	[1]	SEAL-O-RING
51.	311-6342	[1]	SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)
51A.	309-8006	[1]	WASHER

	278-4138 F	[5]	KIT-FUEL LINE PROTECTION
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

303-2929: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

303-2929 PUMP GP-FUEL INJECTION
S/N C6E3160-5432
PART OF 257-8006, 264-0593 ENGINE AR-PRIMARY

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	276-8398 Y	[1]	PUMP GP-FUEL INJECTION
2.	230-8989	[1]	GEAR-FUEL PUMP (68-TEETH)
3.	6I-0260 M	[4]	BOLT (M8X1.25X25-MM)
4.	232-3149	[6]	WASHER (8.35X16.85X1.55-MM THK)
5.	310-7918	[1]	BRACKET-SUPPORT
6.	287-6838	[1]	BRACKET
7.	101-3895 M	[1]	BOLT (M8X1.25X35-MM)
8.	6I-0217 M	[6]	BOLT (M8X1.25X20-MM)
9.	287-6839	[2]	BOLT
10.	311-6632 C	[1]	RAIL AS-FUEL
11.	300-2940	[1]	BRACKET
12.	6I-4374 M	[2]	BOLT (M8X1.25X60-MM)
13.	6I-4793 M	[1]	BOLT (M8X1.25X50-MM)
14.	217-9039	[1]	STRAP-CABLE
15.	290-3910	[1]	LINE-FUEL INJECTION
16.	280-1889	[4]	CLAMP
17.	280-1890	[4]	CLAMP
18.	280-1891	[4]	ISOLATOR
19.	241-4291	[4]	SCREW
20.	6I-0254 M	[4]	BOLT (M8X1.25X30-MM)
21.	306-9390 CY	[6]	INJECTOR GP-FUEL
22.	278-5168	[6]	CLAMP-INJECTOR
23.	278-5170	[6]	BOLT
24.	290-3911	[1]	LINE-FUEL INJECTION (CYL NO. 1)
25.	290-3912	[1]	LINE-FUEL INJECTION (CYL NO. 2)
26.	290-3913	[1]	LINE-FUEL INJECTION (CYL NO. 3)
27.	290-3914	[1]	LINE-FUEL INJECTION (CYL NO. 4)
28.	290-3915	[1]	LINE-FUEL INJECTION (CYL NO. 5)
29.	290-3916	[1]	LINE-FUEL INJECTION (CYL NO. 6)
30.	278-5180	[2]	CLIP
31.	321-1270	[1]	TUBE-OIL
32.	225-8524	[1]	BOLT-SPECIAL
33.	320-2391	[2]	WASHER
34.	286-3683	[1]	CONTROL GP-UNPROGRAMMED
35.	278-5201	[2]	CONNECTION
36.	278-5202	[2]	SEAL-O-RING
37.	6I-0456 M	[4]	BOLT (M8X1.25X45-MM)
38.	217-0099	[4]	SPACER (8.2X25X2-MM THK)
39.	155-0576	[8]	MOUNT-ISOLATION
40.	278-5203	[4]	SPACER
41.	7W-2632	[1]	WASHER (8.5X16.8X1.6-MM THK)
42.	293-9901	[1]	BRACKET
43.	268-6678	[1]	BRACKET AS
43A.	260-3939 M	[1]	SCREW-HEX HEAD (M6X1X25-MM)
44.	268-6677	[1]	BRACKET AS
44A.	260-3939 M	[1]	SCREW-HEX HEAD (M6X1X25-MM)
45.	278-5225	[1]	KIT-SENSOR (ENGINE OIL PRESSURE)
45A.	199-9267	[1]	SEAL-O-RING
46.	311-3858	[1]	KIT-SENSOR (ENGINE SPEED)
46A.	274-1639	[1]	SEAL
47.	124-3815 M	[1]	BOLT (M8X1.25X16-MM)
48.	278-5272	[1]	KIT-SENSOR (AIR TEMPERATURE)
48A.	278-5226	[1]	SEAL-O-RING
49.	278-5273	[1]	KIT-SENSOR (AIR PRESSURE)
49A.	199-9252	[1]	SEAL-O-RING
50.	278-5307	[1]	KIT-SENSOR (WATER TEMPERATURE)
50A.	199-9267	[1]	SEAL-O-RING
51.	311-6342	[1]	SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)
51A.	309-8006	[1]	WASHER

	278-4138 F	[5]	KIT-FUEL LINE PROTECTION
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

303-2929: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

303-2929 PUMP GP-FUEL INJECTION
S/N C6E5433-UP
PART OF 257-8006, 264-0593 ENGINE AR-PRIMARY

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	317-8021 CY	[1]	PUMP GP-FUEL INJECTION
2.	230-8989	[1]	GEAR-FUEL PUMP (68-TEETH)
3.	6I-0260 M	[4]	BOLT (M8X1.25X25-MM)
4.	232-3149 C	[3]	WASHER (8.35X16.85X1.55-MM THK)
5.	310-7918	[1]	BRACKET-SUPPORT
6.	287-6838	[1]	BRACKET
7.	101-3895 M	[1]	BOLT (M8X1.25X35-MM)
8.	6I-0217 M	[6]	BOLT (M8X1.25X20-MM)
9.	287-6839	[2]	BOLT
10.	318-2396	[1]	RAIL AS-FUEL
	305-5291	[1]	VALVE AS-RELIEF (FUEL RAIL)
	228-7102	[1]	SEAL-O-RING
11.	300-2940	[1]	BRACKET
12.	6I-4374 M	[2]	BOLT (M8X1.25X60-MM)
13.	6I-4793 M	[1]	BOLT (M8X1.25X50-MM)
14.	217-9039	[1]	STRAP-CABLE
15.	336-8180	[1]	LINE-FUEL INJECTION
16.	330-3685	[4]	CLAMP
17.	330-3687	[4]	CLAMP
18.	330-5467	[4]	ISOLATOR
19.	241-4291	[4]	SCREW
20.	6I-0254 M	[4]	BOLT (M8X1.25X30-MM)
21.	320-0690 CY	[6]	INJECTOR GP-FUEL
22.	278-5168	[6]	CLAMP-INJECTOR
23.	278-5170	[6]	BOLT
24.	336-8174	[1]	LINE-FUEL INJECTION (CYL NO. 1)
25.	336-8175	[1]	LINE-FUEL INJECTION (CYL NO. 2)
26.	336-8176	[1]	LINE-FUEL INJECTION (CYL NO. 3)
27.	336-8177	[1]	LINE-FUEL INJECTION (CYL NO. 4)
28.	336-8178	[1]	LINE-FUEL INJECTION (CYL NO. 5)
29.	336-8179	[1]	LINE-FUEL INJECTION (CYL NO. 6)
30.	278-5180	[2]	CLIP
31.	321-1270	[1]	TUBE-OIL
32.	225-8524	[1]	BOLT-SPECIAL
33.	160-0162 C	[2]	WASHER
34.	331-7539	[1]	CONTROL GP-UNPROGRAMMED
35.	278-5201	[2]	CONNECTION
36.	278-5202	[2]	SEAL-O-RING
37.	6I-0456 M	[4]	BOLT (M8X1.25X45-MM)
38.	217-0099	[4]	SPACER (8.2X25X2-MM THK)
39.	155-0576	[8]	MOUNT-ISOLATION
40.	278-5203	[4]	SPACER
41.	7W-2632	[1]	WASHER (8.5X16.8X1.6-MM THK)
42.	293-9901	[1]	BRACKET
43.	268-6678	[1]	BRACKET AS
43A.	260-3939 M	[1]	SCREW-HEX HEAD (M6X1X25-MM)
44.	268-6677	[1]	BRACKET AS
44A.	260-3939 M	[1]	SCREW-HEX HEAD (M6X1X25-MM)
45.	278-5225	[1]	KIT-SENSOR (ENGINE OIL PRESSURE)
45A.	199-9267	[1]	SEAL-O-RING
46.	311-3858	[1]	KIT-SENSOR (ENGINE SPEED)
46A.	274-1639	[1]	SEAL
	238-0120	[1]	SENSOR GP-SPEED
47.	124-3815 M	[1]	BOLT (M8X1.25X16-MM)
48.	278-5272	[1]	KIT-SENSOR (AIR TEMPERATURE)
48A.	278-5226	[1]	SEAL-O-RING
49.	278-5273	[1]	KIT-SENSOR (AIR PRESSURE)
49A.	199-9252	[1]	SEAL-O-RING
50.	278-5307	[1]	KIT-SENSOR (WATER TEMPERATURE)
50A.	199-9267	[1]	SEAL-O-RING
51.	311-6342	[1]	SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)
51A.	309-8006	[1]	WASHER

	278-4138 F	[5]	KIT-FUEL LINE PROTECTION
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

303-2929: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

303-2929 PUMP GP-FUEL INJECTION
S/N C6E5433-22184
PART OF 257-8006, 264-0593 ENGINE AR-PRIMARY

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	351-0973 CY	[1]	PUMP GP-FUEL INJECTION
2.	230-8989	[1]	GEAR-FUEL PUMP (68-TEETH)
3.	6I-0260 M	[4]	BOLT (M8X1.25X25-MM)
4.	232-3149 C	[3]	WASHER (8.35X16.85X1.55-MM THK)
5.	310-7918	[1]	BRACKET-SUPPORT
6.	287-6838	[1]	BRACKET
7.	101-3895 M	[1]	BOLT (M8X1.25X35-MM)
8.	6I-0217 M	[6]	BOLT (M8X1.25X20-MM)
9.	287-6839	[2]	BOLT
10.	318-2396	[1]	RAIL AS-FUEL
10A.	305-5291	[1]	VALVE AS-RELIEF (FUEL RAIL)
11.	300-2940	[1]	BRACKET
12.	6I-4374 M	[2]	BOLT (M8X1.25X60-MM)
13.	6I-4793 M	[1]	BOLT (M8X1.25X50-MM)
14.	217-9039	[1]	STRAP-CABLE
15.	336-8180	[1]	LINE-FUEL INJECTION
16.	330-3685	[4]	CLAMP
17.	330-3687	[4]	CLAMP
18.	330-5467	[4]	ISOLATOR
19.	241-4291	[4]	SCREW
20.	6I-0254 M	[4]	BOLT (M8X1.25X30-MM)
21.	320-0690 CY	[6]	INJECTOR GP-FUEL
22.	278-5168	[6]	CLAMP-INJECTOR
23.	278-5170	[6]	BOLT
24.	336-8174	[1]	LINE-FUEL INJECTION (CYL NO. 1)
25.	336-8175	[1]	LINE-FUEL INJECTION (CYL NO. 2)
26.	336-8176	[1]	LINE-FUEL INJECTION (CYL NO. 3)
27.	336-8177	[1]	LINE-FUEL INJECTION (CYL NO. 4)
28.	336-8178	[1]	LINE-FUEL INJECTION (CYL NO. 5)
29.	336-8179	[1]	LINE-FUEL INJECTION (CYL NO. 6)
30.	278-5180	[2]	CLIP
31.	321-1270	[1]	TUBE-OIL
32.	225-8524	[1]	BOLT-SPECIAL
33.	160-0162 C	[2]	WASHER
34.	331-7539	[1]	CONTROL GP-UNPROGRAMMED
35.	278-5201	[2]	CONNECTION
36.	278-5202	[2]	SEAL-O-RING
37.	6I-0456 M	[4]	BOLT (M8X1.25X45-MM)
38.	217-0099	[4]	SPACER (8.2X25X2-MM THK)
39.	155-0576	[8]	MOUNT-ISOLATION
40.	278-5203	[4]	SPACER
41.	7W-2632	[1]	WASHER (8.5X16.8X1.6-MM THK)
42.	293-9901	[1]	BRACKET
43.	268-6678	[1]	BRACKET AS
43A.	260-3939 M	[1]	SCREW-HEX HEAD (M6X1X25-MM)
44.	268-6677	[1]	BRACKET AS
44A.	260-3939 M	[1]	SCREW-HEX HEAD (M6X1X25-MM)
45.	278-5225	[1]	KIT-SENSOR (ENGINE OIL PRESSURE)
45A.	199-9267	[1]	SEAL-O-RING
46.	311-3858	[1]	KIT-SENSOR (ENGINE SPEED)
46A.	274-1639	[1]	SEAL
	238-0120	[1]	SENSOR GP-SPEED
47.	124-3815 M	[1]	BOLT (M8X1.25X16-MM)
48.	278-5272	[1]	KIT-SENSOR (AIR TEMPERATURE)
48A.	278-5226	[1]	SEAL-O-RING
49.	278-5273	[1]	KIT-SENSOR (AIR PRESSURE)
49A.	199-9252	[1]	SEAL-O-RING
50.	278-5307	[1]	KIT-SENSOR (WATER TEMPERATURE)
50A.	199-9267	[1]	SEAL-O-RING
51.	311-6342	[1]	SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)
51A.	309-8006	[1]	WASHER

	278-4138 F	[5]	KIT-FUEL LINE PROTECTION
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

303-2929: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

303-2929 PUMP GP-FUEL INJECTION
S/N C6E1-UP
PART OF 257-8006, 264-0593, 370-3677 ENGINE AR-PRIMARY

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	317-8021 Y	[1]	PUMP GP-FUEL INJECTION
2.	230-8989	[1]	GEAR-FUEL PUMP (68-TEETH)
3.	6I-0260 M	[4]	BOLT (M8X1.25X25-MM)
4.	232-3149	[3]	WASHER (8.35X16.85X1.55-MM THK)
5.	310-7918	[1]	BRACKET-SUPPORT
6.	287-6838	[1]	BRACKET
7.	101-3895 M	[1]	BOLT (M8X1.25X35-MM)
8.	6I-0217 M	[6]	BOLT (M8X1.25X20-MM)
9.	287-6839	[2]	BOLT
10.	438-3416	[1]	RAIL AS-FUEL
10A.	416-7101	[1]	VALVE AS-RELIEF (FUEL RAIL)
	228-7102	[1]	SEAL-O-RING
13.	6I-4793 CM	[3]	BOLT (M8X1.25X50-MM)
15.	355-1582 C	[1]	TUBE AS
16.	330-3685 C	[3]	CLAMP
17.	330-3687 C	[3]	CLAMP
18.	330-5467 C	[3]	ISOLATOR
20.	6I-0254 CM	[3]	BOLT (M8X1.25X30-MM)
21.	320-0690 Y	[6]	INJECTOR GP-FUEL
22.	278-5168	[6]	CLAMP-INJECTOR
23.	278-5170	[6]	BOLT
24.	336-8174	[1]	LINE-FUEL INJECTION (CYL NO. 1)
25.	336-8175	[1]	LINE-FUEL INJECTION (CYL NO. 2)
26.	336-8176	[1]	LINE-FUEL INJECTION (CYL NO. 3)
27.	336-8177	[1]	LINE-FUEL INJECTION (CYL NO. 4)
28.	336-8178	[1]	LINE-FUEL INJECTION (CYL NO. 5)
29.	336-8179	[1]	LINE-FUEL INJECTION (CYL NO. 6)
30.	278-5180	[2]	CLIP
31.	321-1270	[1]	TUBE-OIL
32.	346-0006	[1]	BOLT-SPECIAL
33.	346-0007	[2]	WASHER
34.	331-7539	[1]	CONTROL GP-UNPROGRAMMED
35.	278-5201	[2]	CONNECTION
36.	228-7100	[2]	SEAL-O-RING
37.	6I-0456 M	[4]	BOLT (M8X1.25X45-MM)
38.	217-0099	[4]	SPACER (8.2X25X2-MM THK)
39.	155-0576	[8]	MOUNT-ISOLATION
40.	278-5203	[4]	SPACER
41.	7W-2632	[1]	WASHER (8.5X16.8X1.6-MM THK)
42.	293-9901	[1]	BRACKET
43.	268-6678	[1]	BRACKET AS
43A.	260-3939 M	[1]	SCREW-HEX HEAD (M6X1X25-MM)
44.	268-6677	[1]	BRACKET AS
44A.	260-3939 M	[1]	SCREW-HEX HEAD (M6X1X25-MM)
45.	278-5225	[1]	KIT-SENSOR (ENGINE OIL PRESSURE)
45A.	199-9267	[1]	SEAL-O-RING
46.	311-3858	[1]	KIT-SENSOR (ENGINE SPEED)
46A.	274-1639	[1]	SEAL
	238-0120	[1]	SENSOR GP-SPEED
47.	124-3815 M	[1]	BOLT (M8X1.25X16-MM)
48.	278-5272	[1]	KIT-SENSOR (AIR TEMPERATURE)
48A.	278-5226	[1]	SEAL-O-RING
49.	278-5273	[1]	KIT-SENSOR (AIR PRESSURE)
49A.	199-9252	[1]	SEAL-O-RING
50.	278-5307	[1]	KIT-SENSOR (WATER TEMPERATURE)
50A.	199-9267	[1]	SEAL-O-RING
51.	311-6342	[1]	SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)
51A.	309-8006	[1]	WASHER
52.	280-1892 C	[3]	BOLT
53.	1N-3361 C	[1]	SPACER

	278-4138 F	[5]	KIT-FUEL LINE PROTECTION
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

317-8021: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

317-8021 PUMP GP-FUEL INJECTION
S/N C6E1-UP
PART OF 303-2929, 367-9995 PUMP GP-FUEL INJECTION

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	228-0172	[1]	FITTING-FUEL
2.	228-7100	[3]	SEAL-O-RING
3.	238-0120	[1]	SENSOR GP-SPEED (SECONDARY, TIMING)
4.	247-6019	[1]	SEAL-O-RING
5.	248-1066	[1]	FITTING-FUEL
6.	257-2381	[2]	PIN
7.	257-2382	[2]	PLUG
8.	258-8149	[2]	SPRING
9.	294-3031	[1]	BOLT-SPECIAL
10.	294-3032	[1]	WASHER-SPECIAL
11.	295-4801 M	[1]	NUT (M14X1.5-THD)
12.	426-4806	[1]	PUMP GP-FUEL TRANSFER
13.	117-1385	[1]	SEAL-O-RING
14.	287-7272	[1]	CONNECTOR
	3E-4296	[1]	SEAL-O-RING
15.	334-2932	[1]	SEAL-O-RING
16.	3B-4509	[1]	LOCKWASHER
17.	5A-3604 M	[5]	BOLT-SOCKET HEAD (M8X1.25X25-MM)
18.	8C-3076	[1]	SEAL-O-RING
19.	8L-2779	[1]	SEAL-O-RING
20.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
	M		METRIC PART

Information:

FUEL SYSTEM

PUMP GP-FUEL INJECTION

Truck Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01

Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Special Instruction

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

High Leak-off of the Electronic Unit Injector on C6.6 and C4.4 Engines {1251, 1290}
High Leak-off of the Electronic Unit Injector on C6.6 and C4.4 Engines {1251, 1290}

Diagnostic Process for Fuel Rail Pressure Sensor{1718}
Diagnostic Process for Fuel Rail Pressure Sensor{1718}

Adjusting the Settings on Engine Data Logs on C6.6 and C4.4 Engines{0701, 1714}
Adjusting the Settings on Engine Data Logs on C6.6 and C4.4 Engines{0701, 1714}

Checking the High-Pressure Relief Valve for Leakage on C6.6 and C4.4 Engines{1288}
Checking the High-Pressure Relief Valve for Leakage on C6.6 and C4.4 Engines{1288}

Improved Fuel System Diagnostic Test Documentation for Certain C4.4 and C6.6 Engines{1250, 1280}
Improved Fuel System Diagnostic Test Documentation for Certain C4.4 and C6.6 Engines{1250, 1280}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINE ON CERTAIN 120M DEFENSE PRODUCTS MOTOR GRADERS AND 12M AND 120M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINE ON CERTAIN 120M DEFENSE PRODUCTS MOTOR GRADERS AND 12M AND 120M MOTOR GRADERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Specifications

Fuel Injection Nozzles
C6.6 Engines for Caterpillar Built Machines

Fuel Injection Pump
C6.6 Engines for Caterpillar Built Machines

Tool Operating Manual

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}

Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}

Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}

169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}

Service Letter-China

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINE ON CERTAIN 120M DEFENSE PRODUCTS MOTOR GRADERS AND 12M AND 120M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINE ON CERTAIN 120M DEFENSE PRODUCTS MOTOR GRADERS AND 12M AND 120M MOTOR GRADERS

Service Letter-Asia

Reuse And Salvage Guidelines

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Information Release Memo

PRODUCT LINE EXPANSION: REMAN COMMON RAIL FUEL PUMPS FOR CERTAIN TIER III C4.2, C4.4, C6.4, C6.6 Engines
PRODUCT LINE EXPANSION: REMAN COMMON RAIL FUEL PUMPS FOR CERTAIN TIER III C4.2, C4.4, C6.4, C6.6 Engines

PRODUCT LINE INTRODUCTION: REMAN COMMON RAIL FUEL INJECTORS FOR CERTAIN C4.4, C6.6 TIER III ENGINES AND CERTAIN SMALL AND MEDIUM EXCAVATORS
PRODUCT LINE INTRODUCTION: REMAN COMMON RAIL FUEL INJECTORS FOR CERTAIN C4.4, C6.6 TIER III ENGINES AND CERTAIN SMALL AND MEDIUM EXCAVATORS

CAT REMAN BRINGS TO THE MARKET SEVERAL NEW FUEL INJECTOR AND PUMP SOLUTIONS
CAT REMAN BRINGS TO THE MARKET SEVERAL NEW FUEL INJECTOR AND PUMP SOLUTIONS

Service Letter-APD

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINE ON CERTAIN 120M DEFENSE PRODUCTS MOTOR GRADERS AND 12M AND 120M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINE ON CERTAIN 120M DEFENSE PRODUCTS MOTOR GRADERS AND 12M AND 120M MOTOR GRADERS

Testing and Adjusting

Fuel Injection Timing - Check
C6.6 Engines for Caterpillar Built Machines

Troubleshooting

Injector Trim File
C6.6 Engines For Caterpillar Built Machines

CID 0005 FMI 02
C6.6 Engines For Caterpillar Built Machines

CID 0005 FMI 05
C6.6 Engines For Caterpillar Built Machines

CID 0005 FMI 06
C6.6 Engines For Caterpillar Built Machines

CID 0005 FMI 07
C6.6 Engines For Caterpillar Built Machines

CID 0006 FMI 02
C6.6 Engines For Caterpillar Built Machines

CID 0006 FMI 05
C6.6 Engines For Caterpillar Built Machines

CID 0006 FMI 06
C6.6 Engines For Caterpillar Built Machines

CID 0006 FMI 07
C6.6 Engines For Caterpillar Built Machines

CID 0001 FMI 05
C6.6 Engines For Caterpillar Built Machines

CID 0001 FMI 06
C6.6 Engines For Caterpillar Built Machines

CID 0002 FMI 05
C6.6 Engines For Caterpillar Built Machines

CID 0002 FMI 06
C6.6 Engines For Caterpillar Built Machines

CID 0003 FMI 05
C6.6 Engines For Caterpillar Built Machines

CID 0003 FMI 06
C6.6 Engines For Caterpillar Built Machines

CID 0004 FMI 05
C6.6 Engines For Caterpillar Built Machines

CID 0004 FMI 06
C6.6 Engines For Caterpillar Built Machines

CID 0001 FMI 02
C6.6 Engines For Caterpillar Built Machines

CID 0002 FMI 02
C6.6 Engines For Caterpillar Built Machines

CID 0004 FMI 02
C6.6 Engines For Caterpillar Built Machines

CID 0001 FMI 07
C6.6 Engines For Caterpillar Built Machines

CID 0002 FMI 07
C6.6 Engines For Caterpillar Built Machines

CID 0003 FMI 07
C6.6 Engines For Caterpillar Built Machines

CID 0004 FMI 07
C6.6 Engines For Caterpillar Built Machines

CID 1779 FMI 05
C6.6 Engines For Caterpillar Built Machines

CID 1779 FMI 06
C6.6 Engines For Caterpillar Built Machines

Injector Data Incorrect - Test
C6.6 Engines For Caterpillar Built Machines

Injector Solenoid Circuit - Test
C6.6 Engines For Caterpillar Built Machines

CID 0003 FMI 02
C6.6 Engines For Caterpillar Built Machines

Fuel Rail Pump Solenoid - Test
C6.6 Engines For Caterpillar Built Machines

CID 1627 FMI 05
C6.6 Engines For Caterpillar Built Machines

CID 1627 FMI 06
C6.6 Engines For Caterpillar Built Machines

Disassembly and Assembly

Electronic Unit Injector - Install
C6.6 Engines for Caterpillar Built Machines

Fuel Injection Pump - Remove
C6.6 Engines for Caterpillar Built Machines

Fuel Injection Pump - Install
C6.6 Engines for Caterpillar Built Machines

Fuel Injection Pump Gear - Remove
C6.6 Engines for Caterpillar Built Machines

Fuel Injection Pump Gear - Install
C6.6 Engines for Caterpillar Built Machines

Electronic Unit Injector - Remove
C6.6 Engines for Caterpillar Built Machines

Service Magazine

Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Fuel Transfer Pump {1251}
2008/06/30

Support for Fuel Injection Pumps {1251}
2008/07/14

Improved Electronic Unit Injectors for C6.6 and C4.4 Engines {1251, 1290}
2008/10/13

Improved Fuel Injection Pump Timing Tool {1251}
2009/01/26

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

New Pressure Relief Valve {1251, 1715}
2009/06/01

Diagnostic Process for Fuel Rail Pressure Sensor {127A, 1439}
2009/08/31

New Fuel Injection Lines {1251, 1252}
2009/08/24

New Software Is Now Available For The Engines On The 120M Motor Grader And The 420E Backhoe Loader {1920}
2009/09/14

Fuel Injection Pump Gear on 3054C, C3.3, C6.6, C4.4 and C4.4 (Mech) Engines {1251, 1290}
2009/12/09

New Fuel Manifold (Rail) for C6.6 and C4.4 Machine Engines {1288}
2010/12/08

Fuel Injection Pump on Certain C6.6 and C6.4 Engines {1251, 1274}
2011/11/23

New Clamp for Fuel Injection Lines on C6.6 Machine Engines {1251, 1290, 7553}
2012/10/11

Improved Diagnostic Process is Available for the High Pressure Fuel System on C6.6 and C4.4 Machine Engines {1251, 1290}
2012/08/02

Improved Caterpillar Remanufactured Fuel Injectors for Certain C7 and C9 Machine Engines {1251, 1290}
2013/09/26

Caterpillar Parts SIS Catalog 120M :

Truck sale:

212,000

Caterpillar 120M2, Construction
- motor graders

317,000

Caterpillar 120M2, Construction
- motor graders
HOLT CAT

On Request

Caterpillar 120M2, Construction
- motor graders
BERGERAT MONNOYEUR S.A.S.
France

Caterpillar 120M2, Construction
- motor graders
KELLY TRACTOR CO.