AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

255-8715 CYLINDER GP-STEERING S/N B9N181-UP 76.2-MM (3-IN) BORE X 287-MM (11.3-IN) STROKE PART OF 279-5746 CYLINDER & MTG GP-STEERING 120M


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
HYDRAULIC GP
FILTER GP

MOTOR GRADER 120M MOTOR GRADER B9N
 120M Motor Grader B9N00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP4303 120M B9N   (2007)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-SIDESHIFT
249-4116 CYLINDER GP-SIDESHIFT
CYLINDER GP-SIDESHIFT
509-6993 CYLINDER GP-SIDESHIFT
CYLINDER GP-STEERING
255-8715 CYLINDER GP-STEERING
CYLINDER GP-STEERING
262-5766 CYLINDER GP-STEERING
CYLINDER GP-STEERING
389-6062 CYLINDER GP-STEERING
CYLINDER GP-WHEEL LEAN
249-5299 CYLINDER GP-WHEEL LEAN
 

#SEBP43031020
 

255-8715: CYLINDER GP-STEERING

255-8715 CYLINDER GP-STEERING
S/N B9N181-UP
76.2-MM (3-IN) BORE X 287-MM (11.3-IN) STROKE
PART OF 279-5746 CYLINDER & MTG GP-STEERING
i02183783 SEBP4303
2558715 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-1386 E SLEEVE (3-CM)  
1A. 9X-1386 E SLEEVE (9-CM)  
2. 102-2244 [1] GROMMET  
3. 151-7038 [1] HEAD  
4. 212-0907 [1] PLATE-CONNECTOR  
5. 214-6480 [1] PISTON  
6. 217-3311 [1] MAGNET (RING)  
7. 276-1816 [1] GUARD  
8. 242-9514 [1] CARRIER  
9. 242-9515 [1] RING-RETAINING  
10. 248-8805 [1] ROD AS  
11. 249-5193 [1] SENSOR GP-POSITION (STEERING CYLINDER)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
12. 258-9864 [1] CYLINDER AS  
  095-0879 [1] PIN-SPRING  
  310-4759 [1] BOSS AS  
13. 289-2935 [1] SEAL AS-BUFFER  
14. 289-2946 [1] SEAL-U-CUP  
15. 188-2199 [1] SEAL-O-RING  
16. 1H-7339 [1] SEAL-O-RING  
17. 215-1942 [1] RING-BACKUP  
18. 223-3353 [1] RING-WEAR  
19. 308-1845 [1] SEAL-WIPER  
20. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
21. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
22. 4S-5565 [2] BOLT (3/8-16X0.875-IN)  
23. 4T-5613 [1] RING-WEAR  
24. 5J-4561 [1] LOCKNUT (1-14-THD)  
25. 6J-1972 [1] SEAL AS  
27. 6J-5731 [1] RING-BACKUP  
28. 8T-5070 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
29. 8T-8737 [1] PLUG-SEAL  
30. 162-0177 [1] PLUG AS  
  9S-8004 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
  E   ORDER BY THE CENTIMETER
 

#SEBP43031021
 

262-5766: CYLINDER GP-STEERING

262-5766 CYLINDER GP-STEERING
S/N B9N1-UP
76.2-MM (3-IN) BORE X 305-MM (12-IN) STROKE
PART OF 260-8709 CYLINDER & MTG GP-STEERING
i02249869 SEBP4303
2625766 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8737 [1] PLUG-SEAL  
2. 102-2244 [1] GROMMET  
3. 151-7038 [1] HEAD  
4. 212-0907 [1] PLATE-CONNECTOR  
5. 214-6480 [1] PISTON  
6. 217-3311 [1] MAGNET (RING)  
7. 276-1816 [1] GUARD  
8. 242-9514 [1] CARRIER  
9. 242-9515 [1] RING-RETAINING  
10. 262-5768 [1] CYLINDER AS  
11. 262-5769 [1] ROD AS  
12. 289-2935 [1] SEAL AS-BUFFER  
13. 289-2946 [1] SEAL-U-CUP  
14. 188-2199 [1] SEAL-O-RING  
15. 1H-7339 [1] SEAL-O-RING  
16. 215-1942 [1] RING-BACKUP  
17. 223-3353 [1] RING-WEAR  
18. 308-1845 [1] SEAL-WIPER  
19. 262-5906 [1] SENSOR GP-POSITION (STEERING CYLINDER)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
20. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
21. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
22. 4S-5565 [2] BOLT (3/8-16X0.875-IN)  
23. 4T-5613 [1] RING-WEAR  
24. 5J-4561 [1] LOCKNUT (1-14-THD)  
25. 6J-1972 [1] SEAL AS  
27. 6J-5731 [1] RING-BACKUP  
28. 8T-5070 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
30. 9X-1386 E SLEEVE (8.5-CM)  
30A. 9X-1386 E SLEEVE (3-CM)  
31. 162-0177 [1] PLUG AS  
  9S-8004 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
  E   ORDER BY THE CENTIMETER
 

#SEBP43031022
 

389-6062: CYLINDER GP-STEERING

389-6062 CYLINDER GP-STEERING
S/N B9N1-UP
76.2-MM (3-IN) BORE X 287-MM (11.3-IN) STROKE
PART OF 390-0593 CYLINDER & MTG GP-STEERING
i05413876 SEBP4303
3896062 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-5613 J [1] RING-WEAR  
2. 6J-1972 J [1] SEAL AS  
3. 6J-5731 J [1] RING-BACKUP  
4. 151-7038 [1] HEAD  
5. 217-3312 [1] MAGNET  
6. 223-3353 J [1] RING-WEAR  
7. 289-2935 J [1] SEAL AS-BUFFER  
8. 289-2946 J [1] SEAL-U-CUP  
9. 308-1845 J [1] SEAL-WIPER  
10. 350-3842 M [2] SETSCREW (M8X1.25X12.3-MM)  
11. 451-2628 [1] SENSOR GP-POSITION (LINEAR)(STEERING CYLINDER)  
  118-8586 J [1] SEAL-O-RING  
  420-5767 J [1] RING-BACKUP  
12. 376-8250 [1] SPRING-WAVE  
13. 383-7670 [1] PISTON  
14. 389-6077 [1] CYLINDER AS-STEERING  
  289-6002 [1] ELBOW AS  
  1N-5999 [2] PLUG-O-RING  
  7J-0204 [2] SEAL-O-RING  
15. 449-5422 [1] ROD AS  
16. 435-3388 [1] RECEPTACLE AS  
17. 109-1393 M [3] BOLT-SOCKET HEAD (M4X0.7X10-MM)  
18. 1H-7339 J [1] SEAL-O-RING  
19. 3J-7354 [1] SEAL-O-RING  
20. 5S-4455 [1] RING-RETAINING  
21. 8T-9102 M [1] SETSCREW-SOCKET (M5X0.8X10-MM)  
22. 9S-8002 [1] PLUG (7/16-20-THD)  
   
    AVAILABLE REPAIR KIT(S):
  471-0161 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS, O-RINGS & SEALS)
  J   KIT MARKED J SERVICED PARTS MARKED J
  M   METRIC PART
 

#SEBP43031023
 

249-5299: CYLINDER GP-WHEEL LEAN

249-5299 CYLINDER GP-WHEEL LEAN
S/N B9N181-UP
88.9-MM (3.5-IN) BORE X 149-MM (5.87-IN) STROKE
PART OF 260-8713 CYLINDER & MTG GP-WHEEL LEAN
i02189514 SEBP4303
2495299 CYLINDER GP-WHEEL LEAN Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 251-1550 [1] CYLINDER AS  
1A. 2G-8631 [1] BUSHING  
2. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
3. 9X-8399 [1] WASHER (33X56X6-MM THK)  
4. 4T-8054 J [1] SEAL AS  
5. 7J-9885 J [1] RING-WEAR  
6. 9T-9040 [1] PISTON  
7. 175-7898 J [1] SEAL-O-RING  
8. 1S-0669 J [1] RING (BACKUP)  
9. 6E-4974 [1] HEAD  
  308-1845 [1] SEAL-WIPER  
10. 121-9245 [1] ROD AS  
10A. 2G-8631 [1] BUSHING  
11. 308-1845 J [1] SEAL-WIPER  
12. 356-8331 J [1] SEAL-U-CUP  
13. 289-2935 J [1] SEAL AS-BUFFER  
14. 4T-5613 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  376-9011 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP43031024
 

253-4677: DRIVE GP-CIRCLE

253-4677 DRIVE GP-CIRCLE
S/N B9N1-267
PART OF 234-7715 COMMON AR
i02248423 SEBP4303
2534677 DRIVE GP-CIRCLE Parts scheme 2534677 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4038 [2] CUP-BEARING  
2. 1B-4046 [2] CONE-BEARING  
3. 2G-0478 [5] PLATE-CLUTCH  
4. 2G-6695 [1] BRACKET  
5. 5K-5288 [1] SEAL GP-DUO-CONE  
  5K-5129 [2] RING-SEALING  
6. 6G-5533 [1] GEAR-WORM (36-TEETH)  
7. 6G-5534 [1] COVER AS  
  6G-5537 [1] BEARING  
8. 6G-5538 [1] COVER  
9. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
10. 6G-6122 [1] SPRING-DISC  
11. 6Y-7953 [6] DISC-FRICTION  
12. 7D-8983 B [10] SHIM (0.005-IN THK)  
13. 7D-8984 B [6] SHIM (0.007-IN THK)  
14. 8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
15. 8D-7424 [1] SPACER (48X81X6-MM THK)  
16. 8T-0336 [1] FITTING-PRESSURE RELIEF  
17. 312-0782 [1] WORM-CIRCLE DRIVE  
18. 9D-1491 [1] COUPLING  
19. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
20. 253-4678 [1] HOUSING AS-DRIVE  
  2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
  8D-7426 [1] BUSHING  
  160-0011 M [4] STUD-TAPERLOCK (M20X2.5X85-MM)  
21. 261-8553 [1] PINION-CIRCLE DRIVE  
22. 307-1958 [1] SHAFT-PINION DRIVE  
23. 307-1959 B [6] SHIM (0.13-MM THK)(0.2-MM THK)  
24. 307-1960 B [1] SHIM (0.25-MM THK)(0.3-MM THK)  
25. 307-1961 [1] PLATE  
26. 307-1962 B [4] SHIM (0.5-MM THK)(0.5-MM THK)  
27. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
28. 1A-1415 [1] NUT (1-7/8-12-THD)  
29. 1B-5174 [1] PLUG-PIPE  
30. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
31. 1H-7339 [1] SEAL-O-RING  
32. 2B-7410 [1] PLUG-PIPE (OIL DRAIN)  
33. 2H-9247 [1] SEAL-O-RING  
34. 4F-9653 [1] SEAL-O-RING  
35. 4H-6996 [1] PIN-SPRING  
36. 5H-4909 [1] SEAL-O-RING  
37. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
38. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
40. 6G-5539 [1] GASKET  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
43. 6V-5686 M [3] BOLT (M16X2X50-MM)  
44. 8D-5054 [3] WASHER-HARD (17X30X3-MM THK)  
45. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
46. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP43031025
 

253-4677: DRIVE GP-CIRCLE

253-4677 DRIVE GP-CIRCLE
S/N B9N268-UP
PART OF 234-7715, 349-2548 COMMON AR
i04035909 SEBP4303
2534677 DRIVE GP-CIRCLE Parts scheme 2534677 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4038 [2] CUP-BEARING  
2. 1B-4046 [2] CONE-BEARING  
3. 2G-0478 [5] PLATE-CLUTCH  
4. 2G-6695 [1] BRACKET  
5. 5K-5288 [1] SEAL GP-DUO-CONE  
  5K-5129 [2] RING-SEALING  
6. 323-8674 C [1] GEAR-WORM (36-TEETH)  
7. 6G-5534 [1] COVER AS  
  6G-5537 [1] BEARING  
8. 6G-5538 [1] COVER  
9. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
10. 6G-6122 [1] SPRING-DISC  
11. 6Y-7953 [6] DISC-FRICTION  
12. 7D-8983 B [10] SHIM (0.005-IN THK)  
13. 7D-8984 B [6] SHIM (0.007-IN THK)  
14. 8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
15. 8D-7424 [1] SPACER (48X81X6-MM THK)  
16. 8T-0336 [1] FITTING-PRESSURE RELIEF  
17. 323-8675 C [1] WORM-CIRCLE DRIVE  
18. 9D-1491 [1] COUPLING  
19. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
20. 253-4678 [1] HOUSING AS-DRIVE  
  2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
  8D-7426 [1] BUSHING  
  286-2631 M [4] STUD-TAPERLOCK (M20X2.5X85-MM)  
21. 261-8553 [1] PINION-CIRCLE DRIVE  
22. 307-1958 [1] SHAFT-PINION DRIVE  
23. 307-1959 B [6] SHIM (0.13-MM THK)  
24. 307-1960 B [1] SHIM (0.25-MM THK)  
25. 307-1961 [1] PLATE  
26. 307-1962 B [4] SHIM (0.5-MM THK)  
27. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
28. 1A-1415 [1] NUT (1-7/8-12-THD)  
29. 1B-5174 [1] PLUG-PIPE  
30. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
31. 1H-7339 [1] SEAL-O-RING  
32. 2B-0858 [1] PLUG-PIPE (OIL DRAIN)  
33. 2H-9247 [1] SEAL-O-RING  
34. 4F-9653 [1] SEAL-O-RING  
35. 4H-6996 [1] PIN-SPRING  
36. 5H-4909 [1] SEAL-O-RING  
37. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
38. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
40. 6G-5539 [1] GASKET  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
43. 6V-5686 M [3] BOLT (M16X2X50-MM)  
44. 8D-5054 [3] WASHER-HARD (17X30X3-MM THK)  
45. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
46. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP43031026
 

423-9923: DRIVE GP-CIRCLE

423-9923 DRIVE GP-CIRCLE
S/N B9N1-UP
PART OF 349-2548 COMMON AR
i05326456 SEBP4303
4239923 DRIVE GP-CIRCLE Parts scheme 4239923 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4038 [2] CUP-BEARING  
2. 1B-4046 [2] CONE-BEARING  
3. 2G-0478 [5] PLATE-CLUTCH  
4. 2G-6695 [1] BRACKET  
5. 5K-5288 [1] SEAL GP-DUO-CONE  
5A. 5K-5129 [2] RING-SEALING  
6. 6G-5534 [1] COVER AS  
6A. 6G-5537 [1] BEARING  
7. 6G-5538 [1] COVER  
8. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
9. 6G-6122 B [1] SPRING-DISC  
10. 6Y-7953 [6] DISC-FRICTION  
11. 7D-8983 B [10] SHIM (0.005-IN THK)  
12. 7D-8984 B [6] SHIM (0.007-IN THK)  
13. 457-0799 [1] LOCKNUT  
14. 8D-7424 [1] SPACER (48X81X6-MM THK)  
15. 8T-0336 [1] FITTING-PRESSURE RELIEF  
16. 9D-1491 [1] COUPLING  
17. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
18. 253-4678 [1] HOUSING AS-DRIVE  
18A. 8D-7426 [1] BUSHING  
  2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
  286-2631 M [4] STUD-TAPERLOCK (M20X2.5X85-MM)  
19. 307-1959 B [6] SHIM (0.13-MM THK)  
20. 307-1960 B [1] SHIM (0.25-MM THK)  
21. 307-1961 [1] PLATE  
22. 307-1962 B [4] SHIM (0.5-MM THK)  
23. 323-8674 [1] GEAR-WORM (36-TEETH)  
24. 323-8675 [1] WORM-CIRCLE DRIVE  
25. 458-3867 [1] SHAFT-DRIVE  
26. 458-3868 [1] PINION-CIRCLE DRIVE  
27. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
28. 1A-1415 [1] NUT (1-7/8-12-THD)  
29. 1B-5174 [1] PLUG-PIPE  
30. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
31. 1H-7339 [1] SEAL-O-RING  
32. 2B-0858 [1] PLUG-PIPE  
33. 2H-3935 [1] SEAL-O-RING  
34. 2B-8293 [1] SEAL-O-RING  
35. 4H-6996 [1] PIN-SPRING  
36. 5H-4909 [1] SEAL-O-RING  
37. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
38. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
40. 6G-5539 [1] GASKET  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
43. 6V-5686 M [3] BOLT (M16X2X50-MM)  
44. 8D-5054 [3] WASHER-HARD (17X30X3-MM THK)  
45. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
46. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP43031027
 

265-9049: FAN AR-HYDRAULIC

265-9049 FAN AR-HYDRAULIC -ALL WHEEL DRIVE
S/N B9N1-UP
HIGH AMBIENT TEMPERATURE COOLING
PART OF 234-7715, 349-2548 COMMON AR
i03237765 SEBP4303
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  246-7097 Y [1] FAN & MOTOR GP  
  246-6094 Y [1] LINES GP-HYDRAULIC FAN  
    S/N B9N1-250
  332-3943 Y [1] LINES GP-HYDRAULIC FAN (PISTON)  
    S/N B9N135-UP
  246-6103 Y [1] PUMP & MTG GP-PISTON (BRAKE, HYDRAULIC FAN)  
  267-6246 Y [1] WIRING GP-FAN  
    S/N B9N1-250
  Y   SEPARATE ILLUSTRATION
 

#SEBP43031028
 

250-3507: FILTER & MTG GP-HYDRAULIC

250-3507 FILTER & MTG GP-HYDRAULIC
S/N B9N1-UP
PART OF 246-6034 SERVICE CENTER AR
i02178358 SEBP4303
2503507 FILTER & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-8407 [1] PLUG AS  
  9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
3. 242-0407 [1] VALVE AS-DRAIN (HYDRAULIC FILTER)  
4. 245-7603 [1] TUBE AS  
5. 245-8964 [1] BLOCK  
6. 249-2307 Y [1] FILTER GP-OIL (HYDRAULIC TANK RETURN)  
7. 257-8897 [1] HOSE-MOLDED  
8. [2] PLUG AS  
    (EACH INCLUDES)
  9S-4183 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
9. 156-4283 [1] CONNECTOR AS  
  8T-7926 [1] CONNECTOR  
  6K-6307 [1] SEAL-O-RING  
  8T-0315 [1] SEAL-O-RING  
10. 294-9701 [1] TUBE AS  
11. 294-9702 [1] TUBE AS  
12. 4J-0524 [2] SEAL-O-RING  
13. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
14. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 M [2] NUT (M10X1.5-THD)  
16. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
17. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
18. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
19. 8T-6703 [4] CLAMP-HOSE  
20. 8X-5489 [1] SLEEVE  
21. 122-6908 G HOSE-HYDRAULIC (6.3-IN)  
22. 9X-2023 E HOSE (31-CM)  
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43031029
 

191-9784: FILTER GP-OIL

191-9784 FILTER GP-OIL
S/N B9N1-UP
PART OF 246-6117 LINES GP-PUMP
i01441603 SEBP4303
1919784 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-8878 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC)  
2. 7X-8549 [1] SWITCH AS-PRESSURE (FILTER BYPASS)  
  3J-1907 [1] SEAL-O-RING  
3. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
4. 183-7264 [1] VALVE AS-FLUID SAMPLING (FILTER OIL)  
4A. 3J-1907 SEAL-O-RING  
 

Information:

Operation and Maintenance Manual
Blade Lift Cylinder Socket - Lubricate
120M and 12M Motor Graders
Centershift Cylinder Socket - Lubricate
120M and 12M Motor Graders
Ripper Cylinder Bearings - Lubricate
120M and 12M Motor Graders
Steering Cylinder Ends and Tie Rods - Lubricate
120M and 12M Motor Graders
Wheel Lean Bearings - Lubricate
120M and 12M Motor Graders
Blade Lift Cylinder Socket - Check/Adjust/Replace
120M and 12M Motor Graders
Centershift Cylinder Socket - Check/Adjust/Replace
120M and 12M Motor Graders
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
MANUAL INSTALLATION OF STEERING CYLINDER POSITION SENSOR SETUP PARAMETERS{430S}
MANUAL INSTALLATION OF STEERING CYLINDER POSITION SENSOR SETUP PARAMETERS{430S}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
Procedure to Rework the Scarifier Bracket Group on Certain Motor Graders{5213, 6162}
Procedure to Rework the Scarifier Bracket Group on Certain Motor Graders{5213, 6162}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
The "2007A Version 1.1" of CAT ET is Unable to Read Cylinder Trim Files{0785, 4303}
The "2007A Version 1.1" of CAT ET is Unable to Read Cylinder Trim Files{0785, 4303}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Specifications
Wheel Lean Cylinder (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive
Steering Cylinder (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive
Blade Tip Cylinder
120M and 12M Motor Graders Hydraulic and Steering System
Ripper Lift Cylinder
120M and 12M Motor Graders Hydraulic and Steering System
Sideshift Cylinder
120M and 12M Motor Graders Hydraulic and Steering System
Wheel Lean Cylinder
120M and 12M Motor Graders Hydraulic and Steering System
Articulation Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems
Centershift Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems
Blade Lift Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems
Articulation Cylinder
120M and 12M Motor Graders Hydraulic and Steering System
Blade Lift Cylinder
120M and 12M Motor Graders Hydraulic and Steering System
Steering Cylinder
120M and 12M Motor Graders Hydraulic and Steering System
Steering Cylinder and Mounting
120M, 140M and 160M Motor Graders All Wheel Drive
Centershift Cylinder
120M and 12M Motor Graders Hydraulic and Steering System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
Service Letter-Asia
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Information Release Memo
REMAN POSITION SENSING STEERING CYLINDER GROUPS FOR M-SERIES MOTOR GRADERS
REMAN POSITION SENSING STEERING CYLINDER GROUPS FOR M-SERIES MOTOR GRADERS
CATERPILLAR POSITION SENSING CYLINDERS (PSCS)
CATERPILLAR POSITION SENSING CYLINDERS (PSCS)
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
Testing and Adjusting
Hydraulic Cylinder Drift - Check
120M and 12M Motor Graders Hydraulic and Steering System
Cylinder Cycle Time - Check
120M and 12M Motor Graders Hydraulic and Steering System
Steering System - Purge
120M and 12M Motor Graders Hydraulic and Steering System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Troubleshooting
MID 082 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 027 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Disassembly and Assembly
Centershift Cylinder - Remove and Install
120M and 12M Motor Grader Machine Systems
Sideshift Cylinder - Remove and Install
120M and 12M Motor Grader Machine Systems
Blade Tip Cylinder - Remove and Install
120M and 12M Motor Grader Machine Systems
Blade Lift Cylinder - Remove and Install
120M and 12M Motor Grader Machine Systems
Articulation Cylinder - Remove and Install - Left Side
120M and 12M Motor Grader Machine Systems
Articulation Cylinder - Remove and Install - Right Side
120M and 12M Motor Grader Machine Systems
Wheel Lean Cylinder - Remove and Install
120M and 12M Motor Grader Machine Systems
Steering Cylinder - Remove and Install
120M and 12M Motor Grader Machine Systems
Steering Cylinder - Remove and Install
120M and 12M Motor Grader Machine Systems
Service Magazine
Improvement to the Boot Seals for the Steering Cylinders on Certain Motor Graders {4303}
2008/03/24
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2008/04/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A New Boot Seal is Available for Certain Motor Grader Steering Cylinders {4303}
2009/07/20
Blade Lift Modulation that is Selectable is Available {5063, 5102, 7300, 7451, 7610, 7620}
2009/09/07
New Parts Update the Seal Kit for the Centershift Cylinders and the Lift Cylinders on Certain Motor Graders {5102, 5223}
2009/11/18
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24
Optional Guards are Now Available for Certain M Series and M Series 2 Motor Graders {7164}
2011/06/30
An Updated Procedure is Available for the Blade Tip Cylinder on Certain 120H, 120M, 12H, 12M, 140H, 140M, 143H, 14H, 160H, 160M, 163H, and 16H Motor Graders {5106, 7562}
2011/08/09
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Hydraulic Rods and Cylinders for Certain Cat Machines {7562}
2015/08/21
The Assembly Procedure For The Blade Lift Cylinder Has Been Improved On Certain Motor Graders {5102}
2015/02/27
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
Cat<SUP>&reg;</SUP> Reman Announces Remanufactured Cylinders For Motor Grader Applications {4303, 5102, 5106, 5211, 5213, 5223, 5229, 5265}
2015/07/21
Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}
Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}

Caterpillar Parts SIS Catalog 120M :

CYLINDER GP-SIDESHIFT
509-6993 CYLINDER GP-SIDESHIFT
CYLINDER GP-SIDESHIFT
249-4116 CYLINDER GP-SIDESHIFT
CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
CYLINDER GP-RIPPER
326-2227 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
113-7754 CYLINDER GP-RIPPER
CYLINDER GP-LIFT
270-7534 CYLINDER GP-LIFT
CYLINDER GP-HYDRAULIC
6E-4724 CYLINDER GP-HYDRAULIC
CYLINDER GP-STEERING
262-5766 CYLINDER GP-STEERING
CYLINDER GP-STEERING
389-6062 CYLINDER GP-STEERING
CYLINDER GP-WHEEL LEAN
249-5299 CYLINDER GP-WHEEL LEAN
DRIVE GP-CIRCLE
253-4677 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
253-4677 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
423-9923 DRIVE GP-CIRCLE
265-9049 FAN AR-HYDRAULIC
FILTER & MTG GP-HYDRAULIC
250-3507 FILTER & MTG GP-HYDRAULIC

Truck sale:

 
212,000 
Caterpillar 120M2, Construction
- motor graders

Caterpillar 120M2, Construction
317,000 
Caterpillar 120M2, Construction
- motor graders
HOLT CAT
 
On Request 
Caterpillar 120M2, Construction
- motor graders
BERGERAT MONNOYEUR S.A.S.
France
 
 
Caterpillar 120M2, Construction
- motor graders
KELLY TRACTOR CO.
 
 
Caterpillar 120M2, Construction
- motor graders
KELLY TRACTOR CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.