AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

314-9338 CYLINDER GP-HYDRAULIC S/N B9N1-UP 88.9-MM (3.5-IN) BORE X 549-MM (21.6-IN) STROKE PART OF 309-6809 BLADE GP-BULLDOZER 120M


HYDRAULIC SYSTEM
CYLINDER GP
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)

MOTOR GRADER 120M MOTOR GRADER B9N
 120M Motor Grader B9N00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP4303 120M B9N   (2007)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-WHEEL LEAN
249-5299 CYLINDER GP-WHEEL LEAN
CYLINDER GP-HYDRAULIC
217-3501 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
314-9338 CYLINDER GP-HYDRAULIC
 

#SEBP43031420
 

314-9338: CYLINDER GP-HYDRAULIC

314-9338 CYLINDER GP-HYDRAULIC
S/N B9N1-UP
88.9-MM (3.5-IN) BORE X 549-MM (21.6-IN) STROKE
PART OF 309-6809 BLADE GP-BULLDOZER
i02990684 SEBP4303
3149338 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-0325 [1] CYLINDER AS  
  173-7211 [1] CAP AS  
  1K-6985 [2] RING-RETAINING  
  364-8483 [1] BEARING-ALIGNING  
2. 163-0326 [1] PISTON  
3. 163-0327 [1] ROD AS  
  1K-6985 [2] RING-RETAINING  
  9M-1328 [1] BEARING-SELF-ALIGNING  
4. 314-9339 [1] HEAD  
5. 173-9779 M [1] BOLT (M24X3X80-MM)  
6. 175-7898 J [1] SEAL-O-RING  
7. 308-1880 J [1] SEAL-WIPER  
8. 308-1883 J [1] SEAL AS  
9. 308-1884 J [1] SEAL AS  
10. 4J-9224 J [1] RING-BACKUP  
11. 4T-6907 J [1] RING-WEAR  
12. 4T-8054 J [1] SEAL AS  
13. 6V-8237 [1] WASHER (26X44X4-MM THK)  
14. 7J-9885 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  326-0503 J [1] KIT-SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP43031421
 

233-7161: EDGE GP-BIT & CUTTING

233-7161 EDGE GP-BIT & CUTTING
S/N B9N1-UP
12-FT
FOR USE WITH @@@@@243-6702@@@@@
CANNOT BE USED WITH @@@@@233-7140@@@@@, @@@@@233-7141@@@@@, @@@@@233-7142@@@@@, @@@@@233-7143@@@@@, @@@@@233-7144@@@@@, @@@@@233-7139@@@@@, @@@@@233-7162@@@@@, @@@@@233-7163@@@@@, @@@@@233-7164@@@@@, @@@@@268-8690@@@@@, @@@@@268-8691@@@@@, @@@@@268-8692@@@@@, @@@@@268-8693@@@@@, @@@@@268-8694@@@@@, @@@@@268-8695@@@@@, @@@@@268-8696@@@@@, @@@@@268-8697@@@@@
i02240350 SEBP4303
2337161 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-4339 [60] BIT GP (30-MM WIDE)  
    (EACH INCLUDES)
  068-4860 [1] RING-RETAINING  
2. 159-0318 [4] ADAPTER (3-FT)  
3. 2J-3506 [24] NUT-FULL (3/4-10-THD)  
4. 5J-4771 [24] BOLT-PLOW (3/4-10X2.75-IN)  
 

#SEBP43031422
 

233-7162: EDGE GP-BIT & CUTTING

233-7162 EDGE GP-BIT & CUTTING
S/N B9N1-UP
12-FT
FOR USE WITH @@@@@243-6702@@@@@
CANNOT BE USED WITH @@@@@233-7139@@@@@, @@@@@233-7140@@@@@, @@@@@233-7141@@@@@, @@@@@233-7142@@@@@, @@@@@233-7143@@@@@, @@@@@233-7144@@@@@, @@@@@233-7161@@@@@, @@@@@233-7163@@@@@, @@@@@233-7164@@@@@, @@@@@268-8690@@@@@, @@@@@268-8691@@@@@, @@@@@268-8692@@@@@, @@@@@268-8693@@@@@, @@@@@268-8694@@@@@, @@@@@268-8695@@@@@, @@@@@268-8696@@@@@, @@@@@268-8697@@@@@
i02240341 SEBP4303
2337162 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-5180 [48] BIT GP (23-MM WIDE)  
    (EACH INCLUDES)
  068-4860 [1] RING-RETAINING  
2. 159-0313 [4] ADAPTER (3-FT)  
3. 2J-3506 [24] NUT-FULL (3/4-10-THD)  
4. 5J-4771 [24] BOLT-PLOW (3/4-10X2.75-IN)  
 

#SEBP43031423
 

233-7163: EDGE GP-BIT & CUTTING

233-7163 EDGE GP-BIT & CUTTING
S/N B9N1-UP
14-FT
FOR USE WITH @@@@@243-6703@@@@@, @@@@@243-6704@@@@@
CANNOT BE USED WITH @@@@@233-7139@@@@@, @@@@@233-7140@@@@@, @@@@@233-7141@@@@@, @@@@@233-7142@@@@@, @@@@@233-7143@@@@@, @@@@@233-7144@@@@@, @@@@@233-7161@@@@@, @@@@@233-7162@@@@@, @@@@@233-7164@@@@@, @@@@@268-8690@@@@@, @@@@@268-8691@@@@@, @@@@@268-8692@@@@@, @@@@@268-8693@@@@@, @@@@@268-8694@@@@@, @@@@@268-8695@@@@@, @@@@@268-8696@@@@@, @@@@@268-8697@@@@@
i02203640 SEBP4303
2337163 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-4339 [70] BIT GP (30-MM WIDE)  
    (EACH INCLUDES)
  068-4860 [1] RING-RETAINING  
2. 428-6747 [4] ADAPTER (2-FT)  
3. 159-0318 [2] ADAPTER (3-FT)  
4. 2J-3506 [28] NUT-FULL (3/4-10-THD)  
5. 5J-4771 [28] BOLT-PLOW (3/4-10X2.75-IN)  
 

#SEBP43031424
 

233-7164: EDGE GP-BIT & CUTTING

233-7164 EDGE GP-BIT & CUTTING
S/N B9N1-UP
14-FT BLADE
FOR USE WITH @@@@@243-6703@@@@@, @@@@@243-6704@@@@@
CANNOT BE USED WITH @@@@@233-7139@@@@@, @@@@@233-7140@@@@@, @@@@@233-7141@@@@@, @@@@@233-7142@@@@@, @@@@@233-7143@@@@@, @@@@@233-7144@@@@@, @@@@@233-7161@@@@@, @@@@@233-7162@@@@@, @@@@@233-7163@@@@@, @@@@@268-8690@@@@@, @@@@@268-8691@@@@@, @@@@@268-8692@@@@@, @@@@@268-8693@@@@@, @@@@@268-8694@@@@@, @@@@@268-8695@@@@@, @@@@@268-8696@@@@@, @@@@@268-8697@@@@@, @@@@@233-7148@@@@@, @@@@@233-7160@@@@@
i02203641 SEBP4303
2337164 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-5180 [56] BIT GP (23-MM WIDE)  
    (EACH INCLUDES)
  068-4860 [1] RING-RETAINING  
2. 159-0313 [2] ADAPTER (3-FT)  
3. 428-6746 [4] ADAPTER (2-FT)  
4. 2J-3506 [28] NUT-FULL (3/4-10-THD)  
5. 5J-4771 [28] BOLT-PLOW (3/4-10X2.75-IN)  
 

#SEBP43031425
 

268-8690: EDGE GP-BIT & CUTTING

268-8690 EDGE GP-BIT & CUTTING
S/N B9N1-UP
12-FT
FOR USE WITH @@@@@243-6702@@@@@
CANNOT BE USED WITH ANY OTHER BIT GROUP
i02277793 SEBP4303
2688690 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-5180 [60] BIT GP (23-MM WIDE)  
    (EACH INCLUDES)
  068-4860 [1] RING-RETAINING  
2. 159-0318 [4] ADAPTER (3-FT)  
3. 2J-3506 [24] NUT-FULL (3/4-10-THD)  
4. 5J-4771 [24] BOLT-PLOW (3/4-10X2.75-IN)  
 

#SEBP43031426
 

268-8691: EDGE GP-BIT & CUTTING

268-8691 EDGE GP-BIT & CUTTING
S/N B9N1-UP
12-FT
FOR USE WITH @@@@@243-6702@@@@@
CANNOT BE USED WITH ANY OTHER BIT GROUP
i02277791 SEBP4303
2688691 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-5183 [60] BIT GP (15.5-MM)  
    (EACH INCLUDES)
  068-4860 [1] RING-RETAINING  
2. 159-0318 [4] ADAPTER (3-FT)  
3. 2J-3506 [24] NUT-FULL (3/4-10-THD)  
4. 5J-4771 [24] BOLT-PLOW (3/4-10X2.75-IN)  
 

#SEBP43031427
 

268-8692: EDGE GP-BIT & CUTTING

268-8692 EDGE GP-BIT & CUTTING
S/N B9N1-UP
12-FT
FOR USE WITH @@@@@243-6702@@@@@
CANNOT BE USED WITH @@@@@233-7139@@@@@, @@@@@233-7161@@@@@, @@@@@233-7162@@@@@, @@@@@233-7163@@@@@, @@@@@233-7164@@@@@, @@@@@268-8691@@@@@, @@@@@268-8693@@@@@, @@@@@233-7144@@@@@, @@@@@233-7143@@@@@, @@@@@233-7142@@@@@, @@@@@233-7141@@@@@, @@@@@268-8694@@@@@, @@@@@268-8695@@@@@, @@@@@268-8696@@@@@, @@@@@268-8697@@@@@, @@@@@233-7140@@@@@
i02277799 SEBP4303
2688692 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-4339 [48] BIT GP (30-MM WIDE)  
    (EACH INCLUDES)
  068-4860 [1] RING-RETAINING  
2. 159-0313 [4] ADAPTER (3-FT)  
3. 2J-3506 [24] NUT-FULL (3/4-10-THD)  
4. 5J-4771 [24] BOLT-PLOW (3/4-10X2.75-IN)  
 

#SEBP43031428
 

268-8693: EDGE GP-BIT & CUTTING

268-8693 EDGE GP-BIT & CUTTING
S/N B9N1-UP
12-FT
FOR USE WITH @@@@@243-6702@@@@@
CANNOT BE USED WITH ANY OTHER BIT GROUP
i02277800 SEBP4303
2688693 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-5183 [48] BIT GP (15.5-MM)  
    (EACH INCLUDES)
  068-4860 [1] RING-RETAINING  
2. 159-0313 [4] ADAPTER (3-FT)  
3. 2J-3506 [24] NUT-FULL (3/4-10-THD)  
4. 5J-4771 [24] BOLT-PLOW (3/4-10X2.75-IN)  
 

#SEBP43031429
 

268-8694: EDGE GP-BIT & CUTTING

268-8694 EDGE GP-BIT & CUTTING
S/N B9N1-UP
14-FT
FOR USE WITH @@@@@243-6704@@@@@, @@@@@243-6703@@@@@
CANNOT BE USED WITH ANY OTHER BIT GROUP
i02277804 SEBP4303
2688694 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-5180 [70] BIT GP (23-MM WIDE)  
    (EACH INCLUDES)
  068-4860 [1] RING-RETAINING  
2. 428-6747 [4] ADAPTER (2-FT)  
3. 159-0318 [2] ADAPTER (3-FT)  
4. 2J-3506 [28] NUT-FULL (3/4-10-THD)  
5. 5J-4771 [28] BOLT-PLOW (3/4-10X2.75-IN)  
 

Information:

Operation and Maintenance Manual
Blade Lift Cylinder Socket - Lubricate
120M and 12M Motor Graders
Centershift Cylinder Socket - Lubricate
120M and 12M Motor Graders
Ripper Cylinder Bearings - Lubricate
120M and 12M Motor Graders
Steering Cylinder Ends and Tie Rods - Lubricate
120M and 12M Motor Graders
Wheel Lean Bearings - Lubricate
120M and 12M Motor Graders
Blade Lift Cylinder Socket - Check/Adjust/Replace
120M and 12M Motor Graders
Centershift Cylinder Socket - Check/Adjust/Replace
120M and 12M Motor Graders
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
MANUAL INSTALLATION OF STEERING CYLINDER POSITION SENSOR SETUP PARAMETERS{430S}
MANUAL INSTALLATION OF STEERING CYLINDER POSITION SENSOR SETUP PARAMETERS{430S}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
Procedure to Rework the Scarifier Bracket Group on Certain Motor Graders{5213, 6162}
Procedure to Rework the Scarifier Bracket Group on Certain Motor Graders{5213, 6162}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
The "2007A Version 1.1" of CAT ET is Unable to Read Cylinder Trim Files{0785, 4303}
The "2007A Version 1.1" of CAT ET is Unable to Read Cylinder Trim Files{0785, 4303}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Specifications
Wheel Lean Cylinder (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive
Steering Cylinder (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive
Blade Tip Cylinder
120M and 12M Motor Graders Hydraulic and Steering System
Ripper Lift Cylinder
120M and 12M Motor Graders Hydraulic and Steering System
Sideshift Cylinder
120M and 12M Motor Graders Hydraulic and Steering System
Wheel Lean Cylinder
120M and 12M Motor Graders Hydraulic and Steering System
Articulation Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems
Centershift Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems
Blade Lift Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems
Articulation Cylinder
120M and 12M Motor Graders Hydraulic and Steering System
Blade Lift Cylinder
120M and 12M Motor Graders Hydraulic and Steering System
Steering Cylinder
120M and 12M Motor Graders Hydraulic and Steering System
Steering Cylinder and Mounting
120M, 140M and 160M Motor Graders All Wheel Drive
Centershift Cylinder
120M and 12M Motor Graders Hydraulic and Steering System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
Service Letter-Asia
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Information Release Memo
REMAN POSITION SENSING STEERING CYLINDER GROUPS FOR M-SERIES MOTOR GRADERS
REMAN POSITION SENSING STEERING CYLINDER GROUPS FOR M-SERIES MOTOR GRADERS
CATERPILLAR POSITION SENSING CYLINDERS (PSCS)
CATERPILLAR POSITION SENSING CYLINDERS (PSCS)
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
Testing and Adjusting
Hydraulic Cylinder Drift - Check
120M and 12M Motor Graders Hydraulic and Steering System
Cylinder Cycle Time - Check
120M and 12M Motor Graders Hydraulic and Steering System
Steering System - Purge
120M and 12M Motor Graders Hydraulic and Steering System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Troubleshooting
MID 082 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 027 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Disassembly and Assembly
Centershift Cylinder - Remove and Install
120M and 12M Motor Grader Machine Systems
Sideshift Cylinder - Remove and Install
120M and 12M Motor Grader Machine Systems
Blade Tip Cylinder - Remove and Install
120M and 12M Motor Grader Machine Systems
Blade Lift Cylinder - Remove and Install
120M and 12M Motor Grader Machine Systems
Articulation Cylinder - Remove and Install - Left Side
120M and 12M Motor Grader Machine Systems
Articulation Cylinder - Remove and Install - Right Side
120M and 12M Motor Grader Machine Systems
Wheel Lean Cylinder - Remove and Install
120M and 12M Motor Grader Machine Systems
Steering Cylinder - Remove and Install
120M and 12M Motor Grader Machine Systems
Steering Cylinder - Remove and Install
120M and 12M Motor Grader Machine Systems
Service Magazine
Improvement to the Boot Seals for the Steering Cylinders on Certain Motor Graders {4303}
2008/03/24
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2008/04/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A New Boot Seal is Available for Certain Motor Grader Steering Cylinders {4303}
2009/07/20
Blade Lift Modulation that is Selectable is Available {5063, 5102, 7300, 7451, 7610, 7620}
2009/09/07
New Parts Update the Seal Kit for the Centershift Cylinders and the Lift Cylinders on Certain Motor Graders {5102, 5223}
2009/11/18
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24
Optional Guards are Now Available for Certain M Series and M Series 2 Motor Graders {7164}
2011/06/30
An Updated Procedure is Available for the Blade Tip Cylinder on Certain 120H, 120M, 12H, 12M, 140H, 140M, 143H, 14H, 160H, 160M, 163H, and 16H Motor Graders {5106, 7562}
2011/08/09
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Hydraulic Rods and Cylinders for Certain Cat Machines {7562}
2015/08/21
The Assembly Procedure For The Blade Lift Cylinder Has Been Improved On Certain Motor Graders {5102}
2015/02/27
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
Cat<SUP>&reg;</SUP> Reman Announces Remanufactured Cylinders For Motor Grader Applications {4303, 5102, 5106, 5211, 5213, 5223, 5229, 5265}
2015/07/21
Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}
Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}

Caterpillar Parts SIS Catalog 120M :

CYLINDER GP-HYDRAULIC
217-3501 CYLINDER GP-HYDRAULIC
BRACKET GP-SCARIFIER
252-0931 BRACKET GP-SCARIFIER
BRACE GP
293-5559 BRACE GP
BLADE GP-BULLDOZER
309-6809 BLADE GP-BULLDOZER
BLADE GP
243-6704 BLADE GP
BLADE GP
243-6703 BLADE GP
BLADE GP
243-6702 BLADE GP
BIT GP-END
233-7160 BIT GP-END
EDGE GP-BIT & CUTTING
233-7161 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
233-7162 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
233-7163 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
233-7164 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
268-8690 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
268-8691 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
268-8692 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
268-8693 EDGE GP-BIT & CUTTING

Truck sale:

 
212,000 
Caterpillar 120M2, Construction
- motor graders

Caterpillar 120M2, Construction
317,000 
Caterpillar 120M2, Construction
- motor graders
HOLT CAT
 
On Request 
Caterpillar 120M2, Construction
- motor graders
BERGERAT MONNOYEUR S.A.S.
France
 
 
Caterpillar 120M2, Construction
- motor graders
KELLY TRACTOR CO.
 
 
Caterpillar 120M2, Construction
- motor graders
KELLY TRACTOR CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.