ELECTRICAL AND STARTING SYSTEM
HEATER GPELECTRONICS GP-COMMUNICATION
LIGHTING GP
ELECTRONICS GP-MACHINE
ELECTRICAL AND STARTING SYSTEM
HEATER GP
#SEBP43040520
3T-8724: HEATER GP-JACKET WATER
3T-8724 HEATER GP-JACKET WATER
S/N B9M1-UP
240-VOLT, 1000-WATT
CANNOT BE USED WITH @@@@@ 9X-3294@@@@@
S/N B9M1-UP
240-VOLT, 1000-WATT
CANNOT BE USED WITH @@@@@ 9X-3294@@@@@
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS#SEBP43040521
9X-3294: HEATER GP-JACKET WATER
9X-3294 HEATER GP-JACKET WATER
S/N B9M1-UP
120-VOLT, 1000-WATT
PART OF 261-0187 SNOW AR-MOTOR GRADER
CANNOT BE USED WITH @@@@@ 3T-8724@@@@@
S/N B9M1-UP
120-VOLT, 1000-WATT
PART OF 261-0187 SNOW AR-MOTOR GRADER
CANNOT BE USED WITH @@@@@ 3T-8724@@@@@
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS#SEBP43040522
235-6188: INSTALLATION AR-COMMUNICATION
235-6188 INSTALLATION AR-COMMUNICATION -PRODUCT LINK
S/N B9M1-UP
PART OF 352-1913, 352-1914 DISTRIBUTION AR, 349-8722 OPTION AR-REGIONAL
S/N B9M1-UP
PART OF 352-1913, 352-1914 DISTRIBUTION AR, 349-8722 OPTION AR-REGIONAL
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-5607 | [8] | MOUNT-ISOLATION | |
| 2. | 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | |
| 3. | 261-9391 | [1] | HARNESS AS-POWER (PRODUCT LINK RADIO) | |
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8730 | [22] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [64] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 9X-6772 | [2] | STRAP-CABLE | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 4. | 284-8533 | [1] | ANTENNA AS | |
| 355-0598 | [1] | NUT-SPECIAL | ||
| 301-0589 | [1] | ANTENNA (FLEXIBLE) | ||
| 5. | 336-3545 Y | [1] | RADIO GP-COMMUNICATION (PRODUCT LINK 121SR) | |
| 6. | 272-8325 | [1] | PLATE AS | |
| 7. | 272-8326 | [1] | PLATE AS | |
| 8. | 262-1421 Y | [1] | ELECTRONICS GP-COMMUNICATION (PRODUCT LINK 300) | |
| 9. | 3S-2093 | [1] | STRAP-CABLE | |
| 10. | 8T-2947 M | [4] | BOLT (M6X1X45-MM) | |
| 11. | 8T-4138 M | [8] | BOLT (M6X1X20-MM) | |
| 12. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 13. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43040523
373-6739: INSTALLATION AR-COMMUNICATION
373-6739 INSTALLATION AR-COMMUNICATION -PRODUCT LINK
S/N B9M1-UP
PART OF 439-4922 OPTION AR-REGIONAL
S/N B9M1-UP
PART OF 439-4922 OPTION AR-REGIONAL
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [3] | STRAP-CABLE | |
| 2. | 8C-5607 | [8] | MOUNT-ISOLATION | |
| 3. | 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | |
| 4. | 386-3993 | [1] | SERVICE GP-COMMUNICATION (PRODUCT LINK 300) | |
| 5. | 284-8533 | [1] | ANTENNA AS | |
| 301-0589 | [1] | ANTENNA (FLEXIBLE) | ||
| 355-0598 | [1] | NUT-SPECIAL | ||
| 6. | 336-3545 Y | [1] | RADIO GP-COMMUNICATION (PRODUCT LINK 121SR) | |
| 8. | 361-0422 | [1] | COVER | |
| 9. | 367-9324 | [1] | HARNESS AS-CONTROL | |
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [63] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 9X-3402 | [22] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [22] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1767 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 237-0336 | [1] | COVER (CONNECTOR) | ||
| 10. | 156-6175 | [1] | CLIP (LADDER) | |
| 11. | 5C-2890 M | [8] | NUT (M6X1-THD) | |
| 12. | 7X-2535 M | [3] | BOLT (M6X1X60-MM) | |
| 13. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 14. | 8T-4971 M | [4] | BOLT (M6X1X30-MM) | |
| 15. | 9X-6165 | [8] | WASHER (6.5X22X2.5-MM THK) | |
| 16. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 17. | 5P-4115 | [4] | WASHER-HARD (7.2X19X2-MM THK) | |
| 18. | 287-8257 M | [1] | BOLT (M6X1X65-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43040524
380-6092: INSTALLATION AR-COMMUNICATION
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS#SEBP43040525
313-6837: INSTALLATION GP-COMMUNICATION
313-6837 INSTALLATION GP-COMMUNICATION -PRODUCT LINK
S/N B9M1-UP
S/N B9M1-UP
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 8C-5607 | [8] | MOUNT-ISOLATION | |
| 3. | 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | |
| 4. | 251-2247 | [1] | GROMMET | |
| 5. | 261-9391 | [1] | HARNESS AS-POWER (PRODUCT LINK RADIO) | |
| 6. | 262-2043 Y | [1] | ELECTRONICS GP-COMMUNICATION (PRODUCT LINK 300) | |
| 7. | 263-9088 Y | [1] | RADIO GP-COMMUNICATION (PRODUCT LINK 121SR) | |
| 8. | 272-8325 | [1] | PLATE AS | |
| 9. | 272-8326 | [1] | PLATE AS | |
| 10. | 284-8533 | [1] | ANTENNA AS | |
| 301-0589 | [1] | ANTENNA (FLEXIBLE) | ||
| 11. | 307-0047 | [1] | FILM-INFORMATION (PRODUCT LINK, READ OMM) | |
| 12. | 260-7653 | [1] | FILM-WARNING (PRODUCT LINK 300, INTL) | |
| 13. | 275-9651 Y | [1] | APPLICATION GP-COMMUNICATION (PRODUCT LINK 300) | |
| 14. | 8T-2947 M | [4] | BOLT (M6X1X45-MM) | |
| 15. | 8T-4138 M | [8] | BOLT (M6X1X20-MM) | |
| 16. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 17. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43040526
233-3126: INSTALLATION GP-LIGHTING
233-3126 INSTALLATION GP-LIGHTING
S/N B9M1-UP
FLOOD
PART OF 349-3066 OPTION AR-LIGHTING, 364-2033 OPTION AR-MACHINE
FOR USE WITH @@@@@238-8825@@@@@
CANNOT BE USED WITH @@@@@235-6199@@@@@
S/N B9M1-UP
FLOOD
PART OF 349-3066 OPTION AR-LIGHTING, 364-2033 OPTION AR-MACHINE
FOR USE WITH @@@@@238-8825@@@@@
CANNOT BE USED WITH @@@@@235-6199@@@@@
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS#SEBP43040527
237-5920: INSTALLATION GP-SECURITY
237-5920 INSTALLATION GP-SECURITY -MACHINE SECURITY SYSTEM
S/N B9M1-UP
UNIVERSAL ATTACHMENT KIT
FIELD REPLACEMENT ORDER @@@@@468-3606@@@@@
S/N B9M1-UP
UNIVERSAL ATTACHMENT KIT
FIELD REPLACEMENT ORDER @@@@@468-3606@@@@@
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 205-8257 | [1] | COIL AS (EXCITER) | ||
| 207-5271 | [1] | WASHER (27X60.5X0.36-MM THK) | ||
| 5P-5677 BD | WIRE (18-GA, BLACK) | |||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 222-3870 | [1] | COIL AS (FERRITE) | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (15-CM) | |||
| 226-5602 | [1] | FILM-IDENTIFICATION (EXCITER COIL) | ||
| 198-5389 | [1] | FILM-IDENTIFICATION (IGNITION SWITCH) | ||
| 200-5125 | [1] | FILM-IDENTIFICATION (IGNITION SWITCH) | ||
| 224-3385 | [1] | FILM-IDENTIFICATION (ENGINE START) | ||
| 205-0826 | [2] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | ||
| 225-8513 | [1] | HARNESS AS-WIRING (SECURITY) | ||
| 8C-6353 | [1] | CAP-PLUG | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 150-6766 | [1] | PLUG AS-CONNECTOR (26-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8735 | [1] | PLUG-CONNECTOR | ||
| 8T-8737 | [20] | PLUG-SEAL | ||
| 9W-1951 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 186-3736 | [13] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [18] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-6772 | [2] | STRAP-CABLE | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 7N-9017 | [3] | TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW) | ||
| 100-5041 | [8] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM) | |||
| 165-5655 | [1] | LAMP AS (24-VOLT) | ||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 6V-9189 M | [3] | LOCKNUT (M8X1.25-THD) | ||
| 129-3178 M | [4] | LOCKNUT (M6X1-THD) | ||
| 8T-9655 | [6] | MOUNT-ISOLATION | ||
| 149-9818 | [1] | PLATE | ||
| 213-2323 | [1] | PLATE AS | ||
| 230-8173 | [1] | PLATE-COVER | ||
| 467-9245 | [1] | ELECTRONICS GP-MACHINE (SECURITY) | ||
| 3E-5239 | [2] | RELAY AS (24-VOLT)(SECURITY) | ||
| 115-1615 | [2] | RELAY AS (12-VOLT)(SECURITY) | ||
| 200-6260 M | [3] | SCREW-BUTTON HEAD (M8X1.25X50-MM) | ||
| 184-0982 M | [2] | SCREW-PAN HEAD (M6X1X16-MM) | ||
| 141-4976 | [4] | SCREW-WASHER HEAD (4-40X0.5-IN) | ||
| 6I-1418 | [3] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 115-8109 | [2] | SPLICE-WIRE | ||
| 7K-1181 | [20] | STRAP-CABLE | ||
| 151-6320 | [2] | TOOL-WIRE REMOVAL | ||
| 9N-0869 | [6] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| [1] | KIT-RECEPTACLE (2-PIN) | |||
| [1] | KIT-RECEPTACLE (3-PIN) | |||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP43040528
238-8827: INSTALLATION GP-SECURITY
238-8827 INSTALLATION GP-SECURITY -MACHINE SECURITY SYSTEM
S/N B9M1-UP
S/N B9M1-UP
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 3S-2093 | [2] | STRAP-CABLE | |
| 3. | 198-5389 | [1] | FILM-IDENTIFICATION (IGNITION SWITCH) | |
| 4. | 205-0826 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | |
| 5. | 206-5162 J | [2] | KEY AS-ELECTRONIC (SECURITY) | |
| 6. | 206-5208 | [1] | COIL AS (EXCITER) | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 205-8257 | [1] | COIL AS (EXCITER) | ||
| 7. | 218-0404 | [1] | MODULE GP-INTERFACE (KEY)(MACHINE SECURITY SYSTEM) | |
| 8. | 219-6314 | [2] | KEY RING (IDENTIFICATION) | |
| 11. | 238-8813 | [1] | HARNESS AS-CHASSIS (MACHINE SECURITY SYSTEM) | |
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8730 | [10] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS,WEDGE,& INTERFACE SEAL) | ||||
| 12. | 242-3282 | [1] | LAMP AS-LED (24-VOLT, RED) | |
| 14. | 204-0813 | [2] | BOLT (M6X1X40-MM) | |
| 15. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 16. | 8C-5607 | [4] | MOUNT-ISOLATION | |
| 17. | 8C-5608 | [2] | SPACER (6.5X9.5X25.4-MM THK) | |
| 18. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| J | REQUIRES CORPORATE KEY | |||
#SEBP43040529
468-3606: INSTALLATION GP-SECURITY
468-3606 INSTALLATION GP-SECURITY -MACHINE SECURITY SYSTEM
S/N B9M1-UP
S/N B9M1-UP
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 459-2251 Y | [1] | HARNESS AS-CONTROL (MACHINE SECURITY SYSTEM) | ||
| 6V-7357 M | [4] | BOLT (M6X1X25-MM) | ||
| 8T-6912 M | [3] | BOLT (M8X1.25X50-MM) | ||
| 374-7464 | [1] | CAP-SEAL | ||
| 205-8257 | [1] | COIL AS (EXCITER) | ||
| 207-5271 | [1] | WASHER (27X60.5X0.36-MM THK) | ||
| 5P-5677 D | WIRE (18-GA, BLACK)(0.4-M) | |||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 226-5602 | [1] | FILM-IDENTIFICATION (EXCITER COIL) | ||
| 198-5389 | [1] | FILM-IDENTIFICATION (IGNITION SWITCH) | ||
| 200-5125 | [1] | FILM-IDENTIFICATION (IGNITION SWITCH) | ||
| 224-3385 | [1] | FILM-IDENTIFICATION (ENGINE START) | ||
| 205-0826 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 165-5655 | [1] | LAMP AS (24-VOLT)(SECURITY SYSTEM) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 3T-0852 M | [3] | LOCKNUT (M8X1.25-THD) | ||
| 208-8469 M | [4] | LOCKNUT (M6X1-THD) | ||
| 129-3178 M | [4] | LOCKNUT (M6X1-THD) | ||
| 8T-9655 | [6] | MOUNT-ISOLATION | ||
| 149-9818 | [1] | PLATE | ||
| 479-1908 | [1] | PLATE AS | ||
| 5J-5326 | [3] | WASHER (0.766X1.5X0.52-IN THK) | ||
| 213-2323 | [1] | PLATE AS | ||
| 467-9245 | [1] | ELECTRONICS GP-MACHINE (SECURITY) | ||
| 285-3231 | [2] | KEY AS-ELECTRONIC (SECURITY) | ||
| 459-8447 | [1] | SOFTWARE GP-MACHINE | ||
| 3E-5239 | [2] | RELAY AS (24-VOLT) | ||
| 115-1615 | [2] | RELAY AS (12-VOLT) | ||
| 184-0982 M | [2] | SCREW-PAN HEAD (M6X1X16-MM) | ||
| 141-4976 | [4] | SCREW-WASHER HEAD (4-40X0.5-IN) | ||
| 6I-1418 | [3] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 115-8109 | [2] | SPLICE-WIRE | ||
| 7K-1181 | [10] | STRAP-CABLE | ||
| 151-6320 | [2] | TOOL-WIRE REMOVAL | ||
| 9X-6165 | [8] | WASHER (6.5X22X2.5-MM THK) | ||
| 9N-0869 | [6] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
HEATER GP
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE JACKET WATER HEATER CORD ON CERTAIN 140M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE JACKET WATER HEATER CORD ON CERTAIN 140M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE JACKET WATER HEATER CORD ON CERTAIN 140M MOTOR GRADERS
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Specifications
Troubleshooting
Disassembly and Assembly
Service Magazine
