POWER TRAIN
PUMP GPWHEEL GP
SHAFT GP
TORQUE CONVERTER GP
POWER TRAIN
PUMP GP#SEBP43070520
111-6841: PUMP GP-GEAR
111-6841 PUMP GP-GEAR -TRANSMISSION CHARGE, SCAVENGE
S/N DLS1-UP
2-SECTION
PART OF 111-6842 PUMP & DRIVE GP-GEAR
S/N DLS1-UP
2-SECTION
PART OF 111-6842 PUMP & DRIVE GP-GEAR
Parts for your 775F TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 187-6571 | [1] | MANIFOLD AS | |
| 1M-3909 | [2] | BUSHING | ||
| 2. | 2D-8009 | [3] | SEAL-O-RING | |
| 3. | 1P-0985 | [1] | BODY AS-OIL PUMP | |
| 1M-3735 | [4] | DOWEL | ||
| 4. | 3P-7785 | [2] | GEAR (8-TEETH) | |
| 5. | 2B-9373 | [1] | KEY-WOODRUFF | |
| 6. | 111-0265 | [1] | BODY AS-OIL PUMP | |
| 1M-3909 | [2] | BUSHING | ||
| 8M-8489 | [2] | DOWEL | ||
| 7. | 112-2358 | [1] | GEAR AS-OIL PUMP (8-TEETH) | |
| 2B-9373 | [1] | KEY-WOODRUFF | ||
| 116-4627 | [1] | GEAR (8-TEETH) | ||
| 8. | 8E-6496 | [1] | COVER AS | |
| 1M-3909 | [2] | BUSHING | ||
| 9. | 3S-0004 | [6] | WASHER (0.406X0.728X0.09-IN THK) | |
| 10. | 4F-0411 | [2] | BOLT (3/8-16X6.5-IN) | |
| 11. | 112-2356 | [1] | GEAR AS-OIL PUMP (8-TEETH) | |
| 2B-9373 | [1] | KEY-WOODRUFF | ||
| 116-4627 | [1] | GEAR (8-TEETH) | ||
| 12. | 1D-4706 | [4] | BOLT (3/8-16X6-IN) |
#SEBP43070521
143-2137: RIM GP
143-2137 RIM GP
S/N DLS1-UP
(17X35)
PART OF 247-5531 RIM GP-DEMOUNTABLE, 114-9220 RIM GP-SINGLE
ALSO AN ATTACHMENT
S/N DLS1-UP
(17X35)
PART OF 247-5531 RIM GP-DEMOUNTABLE, 114-9220 RIM GP-SINGLE
ALSO AN ATTACHMENT
Parts for your 775F TRUCK:
CATERPILLAR SIS#SEBP43070522
247-5531: RIM GP-DEMOUNTABLE
Parts for your 775F TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 143-2137 Y | [6] | RIM GP | ||
| 3D-2958 | [6] | SEAL-O-RING | ||
| 7D-5007 | [4] | VALVE AS | ||
| (EACH INCLUDES) | ||||
| 7D-5252 | [1] | SPUD AS | ||
| 2D-2507 | [1] | SPUD | ||
| 2D-2508 | [1] | GROMMET | ||
| 2D-2509 | [1] | LOCKNUT (11/16-16-THD) | ||
| 2D-2511 | [2] | VALVE GP-TIRE (TIRE INFLATION) | ||
| (EACH INCLUDES) | ||||
| 3D-2239 | [1] | VALVE AS-TIRE | ||
| 6F-3930 | [1] | CORE-VALVE | ||
| 9K-7951 | [1] | CAP-VALVE | ||
| 7D-5252 | [1] | SPUD AS | ||
| 2D-2507 | [1] | SPUD | ||
| 2D-2508 | [1] | GROMMET | ||
| 2D-2509 | [1] | LOCKNUT (11/16-16-THD) | ||
| 272-7948 | [2] | VALVE GP-TIRE (EXTENSION) | ||
| (EACH INCLUDES) | ||||
| 5D-9661 | [1] | NUT-SEALING (0.482-26-THD) | ||
| 6F-3930 | [1] | CORE-VALVE | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43070523
114-9220: RIM GP-SINGLE
#SEBP43070524
247-5552: SHAFT GP-DRIVE
Parts for your 775F TRUCK:
CATERPILLAR SIS#SEBP43070525
9D-3520: SHAFT GP-DRIVE
Parts for your 775F TRUCK:
CATERPILLAR SIS#SEBP43070526
157-2008: SLIP JOINT GP
Parts for your 775F TRUCK:
CATERPILLAR SIS#SEBP43070527
157-2009: SLIP JOINT GP
Parts for your 775F TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 173-0888 | [2] | UNIVERSAL JOINT GP-ROTOR DRIVE | |
| 2. | 0S-1604 | [8] | BOLT (1/2-20X2.5-IN) | |
| 3. | 8X-8941 J | [1] | TUBE & YOKE AS | |
| 3A. | 3H-0122 | [1] | FITTING-GREASE | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9M-4107 J | [1] | KIT-SEAL (YOKE)(SLIP JOINT) | ||
| (INCLUDES CAP, SEAL & WASHERS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#SEBP43070528
172-7634: SLIP JOINT GP
Parts for your 775F TRUCK:
CATERPILLAR SIS#SEBP43070529
227-8189: TORQUE CONVERTER & HOUSING GP
227-8189 TORQUE CONVERTER & HOUSING GP
S/N DLS1-UP
WITH HOUSING
PART OF 279-5241 TORQUE CONVERTER AR
S/N DLS1-UP
WITH HOUSING
PART OF 279-5241 TORQUE CONVERTER AR
Parts for your 775F TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 227-8190 Y | [1] | TORQUE CONVERTER GP | |
| 2. | 0S-1585 | [13] | BOLT (1/2-13X1.5-IN) | |
| 3. | 5P-8245 | [13] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 4. | 146-7312 | [1] | SEAL-O-RING | |
| 5. | 239-0336 | [1] | HOUSING AS-TORQUE CONVERTER | |
| 1F-1006 | [2] | DOWEL | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 6. | 8P-3251 | [1] | COVER AS | |
| 7B-3028 | [2] | SCREW-DRIVE (NO 4X 3/16-IN) | ||
| 7S-2962 | [1] | WASHER-SPRING (52.3X82.5X9.1-MM THK) | ||
| 8P-1722 | [1] | COVER | ||
| 7. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 8. | 8T-4896 | [18] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 8H-7521 | [1] | SEAL-O-RING | |
| 10. | 8P-3795 | [1] | SCREEN-SUCTION (TORQUE CONVERTER) | |
| 11. | 8T-2502 | [18] | BOLT (3/8-16X1.125-IN) | |
| 12. | 129-0987 | [1] | DRAIN AS | |
| 6J-2419 | [1] | SEAL-O-RING | ||
| 8F-0212 | [1] | SEAL-O-RING | ||
| 175-4946 | [1] | PLUG-DRAIN (TORQUE CONVERTER) | ||
| 13. | 5F-8000 | [1] | SEAL-O-RING | |
| 14. | 113-9556 | [1] | TUBE AS-BAFFLE | |
| 15. | 113-9558 | [1] | GASKET | |
| 16. | 145-3187 | [1] | COVER-GAUGE | |
| 17. | 145-3188 | [1] | GASKET | |
| 18. | 030-9621 | [1] | BOLT (3/8-16X1-IN) | |
| 19. | 119-8732 | [2] | COVER | |
| 20. | 276-8941 | [1] | PLATE (TC SUMP OIL LEVEL)(UPPER) | |
| 21. | 276-8942 | [1] | PLATE (TC SUMP OIL LEVEL)(LOWER) | |
| 22. | 103-9603 | [2] | GAUGE-SIGHT | |
| 23. | 6J-1080 | [2] | GROMMET | |
| 24. | 146-7311 | [1] | SEAL-O-RING | |
| 25. | 4H-6730 | [1] | SEAL-O-RING | |
| 26. | 7X-7816 | [1] | PLATE-SERIAL NUMBER | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
POWER TRAIN
PUMP GP
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Systems Operation
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Service Magazine
Caterpillar Parts SIS Catalog 775F :
Truck sale:
650,000



