AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

163-6623 WIRING GP-CAB S/N GNG1-UP; HKT1-UP PART OF 189-3446 CAB GP, 161-3738 OPERATOR AR Type 2 320C


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 320C EXCAVATOR GNG
 320C & 320C L Excavators GNG00001-UP (MACHINE) POWERED BY 3066 Engine SEBP4313 320C GNG   (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
547-7976 SWITCH & WIRE GP-FUEL LEVEL
WIRING GP-CAB
163-6623 WIRING GP-CAB
WIRING GP-CAB
163-6623 WIRING GP-CAB
WIRING GP-COMMUNICATION
259-4879 WIRING GP-COMMUNICATION
170-6908 WIRING GP-CONSOLE
WIRING GP-CONSOLE
170-6909 WIRING GP-CONSOLE
 

#SEBP43130150
 

163-6623: WIRING GP-CAB

163-6623 WIRING GP-CAB
S/N GNG1-UP; HKT1-UP
PART OF 189-3446 CAB GP, 161-3738 OPERATOR AR
Type 2
i02652862 SEBP4313
1636623 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-1494 [1] KIT-SERVICE METER (24-VOLT)  
    (INCLUDES METER, FILM, CABLE STRAPS & WIRE ASSEMBLIES)
2. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
3. 101-2846 CE GUARD (10-CM)  
4. 163-6795 [12] STRAP-CABLE  
5. 163-6787 [1] HARNESS AS-CAB  
6. 8T-6693 M [2] SCREW-MACHINE (M5X0.8X16-MM)  
7. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
8. 163-6810 [1] HARNESS AS-MONITOR  
9. 5C-8312 M [2] NUT (M4X0.7-THD)  
10. 8C-7581 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
11. 3S-2093 C [3] STRAP-CABLE  
12. 163-6701 [1] PANEL AS-CONTROL  
13. 132-1829 Y [1] ALARM GP (24-VOLT)  
14. 9X-2042 M [1] SCREW-TRUSS HEAD (M6X1X12-MM)  
16. 7K-1181 [2] STRAP-CABLE  
17. 6V-9669 M [2] SCREW-MACHINE (M3X0.5X8-MM)  
18. 3C-6969 M [2] NUT (M3X0.5-THD)  
19. 259-4883 C [1] ANTENNA AS  
20. 6V-9672 CM [2] SCREW-MACHINE (M4X0.7X16-MM)  
21. 167-7023 [1] BRACKET  
22. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
23. 251-0637 C [1] INSULATION  
24. 096-6166 C [2] WASHER-HARD (4.5X9X1-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43130151
 

259-4879: WIRING GP-COMMUNICATION

259-4879 WIRING GP-COMMUNICATION -GLOBAL POSITIONING SYSTEM
S/N GNG1-UP; HKT1-UP
AN ATTACHMENT
i02273718 SEBP4313
2594879 WIRING GP-COMMUNICATION Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 259-4880 [1] HARNESS AS-PANEL (GLOBAL POSITIONING SYSTEM)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  149-5069 [1] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [2] TERMINAL-BLADE (16-GA TO 20-GA)  
  149-5071 [1] TERMINAL-BLADE (12-GA TO 14-GA)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  155-2272 [1] PLUG AS-CONNECTOR (4-PIN)  
  3S-2093 [6] STRAP-CABLE  
2. 3S-2093 [4] STRAP-CABLE  
3. 161-3128 [1] RELAY (24-VOLT)(GLOBAL POSITIONING SYSTEM)  
 

#SEBP43130152
 

170-6908: WIRING GP-CONSOLE

170-6908 WIRING GP-CONSOLE
S/N GNG1-UP; HKT1-UP
PART OF 161-3738 OPERATOR AR
i01318949 SEBP4313
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  170-6909 Y [1] WIRING GP-CONSOLE (LH)  
  170-6910 Y [1] WIRING GP-CONSOLE (RH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP43130153
 

170-6909: WIRING GP-CONSOLE

170-6909 WIRING GP-CONSOLE -LH
S/N GNG1-UP; HKT1-UP
PART OF 170-6908 WIRING GP-CONSOLE
i01319000 SEBP4313
1706909 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 170-6959 [1] HARNESS AS-OPERATOR CONTROLS (CONSOLE, LH)  
  204-1856 [1] CONDUIT  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  3S-2093 [5] STRAP-CABLE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [2] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
2. 7K-1181 [1] STRAP-CABLE  
3. 163-6795 [1] STRAP-CABLE  
4. 3S-2093 [1] STRAP-CABLE  
 

#SEBP43130154
 

170-6910: WIRING GP-CONSOLE

170-6910 WIRING GP-CONSOLE -RH
S/N GNG1-UP; HKT1-UP
PART OF 170-6908 WIRING GP-CONSOLE
i01319018 SEBP4313
1706910 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-6795 [1] STRAP-CABLE  
2. 6V-5738 D TRIM-EDGE (1-M)  
3. 283-3074 [1] SWITCH AS-TOGGLE (AEC AUTO/MANUAL)  
4. 163-6711 [1] SWITCH AS-TOGGLE (BACK-UP THROTTLE)  
5. 197-4279 [1] HARNESS AS-CONSOLE  
  3S-2093 [13] STRAP-CABLE  
  7K-1181 [1] STRAP-CABLE  
  8C-5064 BE CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(18-CM)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 9G-7641 Y [1] SWITCH GP-START (ENGINE, KEY)  
7. 163-6702 [1] PANEL AS  
  170-9324 LAMP AS-INDICATOR (24-VOLT, 3-WATT)  
8. 185-9208 [1] KNOB AS (THROTTLE POSITION)  
9. 106-0107 Y [1] SWITCH GP-ROTARY (ENGINE SPEED)  
10. 170-6828 [1] HARNESS AS-SWITCH (ENGINE START)  
  120-7724 [1] CONNECTOR  
11. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
12. 3S-2093 [2] STRAP-CABLE  
13. 7K-1181 [1] STRAP-CABLE  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP43130155
 

163-6629: WIRING GP-CONVERTER

163-6629 WIRING GP-CONVERTER
S/N GNG1-UP; HKT1-UP
12-VOLT, 7-AMPERE POWER SUPPLY
AN ATTACHMENT
i02366790 SEBP4313
1636629 WIRING GP-CONVERTER Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-3467 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
2. 8T-4171 M [4] BOLT (M6X1X12-MM)  
3. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
4. 213-0641 [1] BRACKET AS  
5. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 167-3457 [1] HARNESS AS-POWER  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8. 3S-2093 [1] STRAP-CABLE  
9. 121-0987 [1] SOCKET-AUXILIARY POWER (12-VOLT, 7-AMPERE)  
  M   METRIC PART
 

#SEBP43130156
 

183-0993: WIRING GP-HAMMER

183-0993 WIRING GP-HAMMER -PEDAL CONTROL
S/N GNG1-UP; HKT1-UP
PART OF 173-7975 CONTROL AR-AUXILIARY
AN ATTACHMENT
i02367072 SEBP4313
1830993 WIRING GP-HAMMER Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [8] STRAP-CABLE  
2. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
3. 111-4836 [2] CLIP  
4. 183-1061 [1] HARNESS AS-SWITCH  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  3S-2093 [2] STRAP-CABLE  
  9G-3695 [1] PLUG-SEAL  
5. 7X-2621 M [1] BOLT (M10X1.5X12-MM)  
6. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
7. 116-0118 [3] CLIP  
8. 3S-2093 [15] STRAP-CABLE  
9. 183-0998 [1] HARNESS AS-SOLENOID (FLOW LIMIT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  3S-2093 [1] STRAP-CABLE  
  9G-3695 [2] PLUG-SEAL  
  M   METRIC PART
 

#SEBP43130157
 

163-6640: WIRING GP-REFUELING PUMP

163-6640 WIRING GP-REFUELING PUMP
S/N GNG1-UP; HKT1-UP
PART OF 240-3017 PUMP AR-REFUELING
AN ATTACHMENT
i02274736 SEBP4313
1636640 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0328 C [3] WASHER-HARD (5.5X10X1-MM THK)  
2. 3S-2093 [16] STRAP-CABLE  
3. 238-1721 [1] WIRE AS  
4. 116-0095 [1] SWITCH AS (REFUELING PUMP, START)  
  6T-9442 [1] SWITCH GP-PUSH BUTTON  
  1S-0812 [2] SCREW-TAPPING  
  3K-0835 [1] NUT (5/8-24-THD)  
  6F-0253 [1] LOCKWASHER  
  8T-8748 [1] ADAPTER-MOUNT  
  9W-0625 [1] SWITCH AS-PUSH BUTTON  
  6V-2689 BD TUBE-HEAT SHRINK (6.35-MM DIA)  
  116-0096 [1] HARNESS AS-WIRING (REFUELING PUMP, START)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
5. 116-0097 [1] SWITCH AS (REFUELING PUMP, STOP)  
  6V-2689 BD TUBE-HEAT SHRINK (6.35-MM DIA)  
  116-0098 [1] HARNESS AS-WIRING (REFUELING PUMP, STOP)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 238-2074 C [1] HARNESS AS-SWITCH (REFUELING PUMP RELAY)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [5] STRAP-CABLE  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7. 9X-3495 [1] CLIP AS  
8. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
9. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
11. 7X-2619 CM [2] BOLT (M6X1X10-MM)  
12. 9X-8256 C [2] WASHER (6.6X12X2-MM THK)  
13. 213-0772 C [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
14. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
15. 096-2591 CM [2] SCREW-MACHINE (M5X0.8X35-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP43130158
 

148-4696: DRIVE GP-FINAL

148-4696 DRIVE GP-FINAL -WITH MOTOR
S/N GNG1-UP; HKT1-UP
PART OF 148-4681 POWER TRAIN AR
i02283034 SEBP4313
1484696 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-6035 CY [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
2. 107-7028 Y [1] MOTOR & MTG GP-TRAVEL  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP43130159
 

227-6035: DRIVE GP-FINAL

227-6035 DRIVE GP-FINAL
S/N GNG1-UP; HKT1-UP
WITHOUT MOTOR
PART OF 148-4696 DRIVE GP-FINAL
i01892425 SEBP4313
2276035 DRIVE GP-FINAL Parts scheme 2276035 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
2. 096-1773 B [1] SHIM (0.15-MM THK)  
  096-1774 B [1] SHIM (0.3-MM THK)  
  096-1775 B [1] SHIM (0.4-MM THK)  
  096-1776 B [1] SHIM (0.5-MM THK)  
  096-1777 B [1] SHIM (0.6-MM THK)  
  096-1778 B [1] SHIM (0.7-MM THK)  
  096-1779 B [1] SHIM (0.8-MM THK)  
  096-1780 B [1] SHIM (1-MM THK)  
  096-1781 B [1] SHIM (1.6-MM THK)  
11. 227-6034 M [14] BOLT-FLANGE HEAD (M16X2X60-MM)  
12. 7Y-0223 [3] SHAFT-PLANETARY  
13. 094-1542 [6] BEARING-ROLLER  
14. 7Y-1431 [3] GEAR-PLANETARY (30-TEETH)  
15. 094-1528 [6] WASHER (53X84X1-MM THK)  
16. 095-0891 [6] PIN-SPRING  
17. 6I-6585 [3] GEAR-PLANETARY (44-TEETH)  
18. 094-0616 [3] BEARING AS-ROLLER  
19. 3E-2338 [2] PLUG-PIPE  
20. 7M-8485 [2] SEAL-O-RING  
21. 7Y-1426 [1] COVER  
22. 7Y-0225 [3] SHAFT-PLANETARY  
23. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
24. 094-0580 [1] PLATE (10-MM THK)  
25. 6I-6583 [1] GEAR-SUN (13-TEETH)  
26. 7Y-1430 [1] GEAR-SUN (17-TEETH)  
27. 7Y-1558 [1] SPACER (90X119.6X7.5-MM THK)  
28. 7Y-1432 [1] CARRIER  
29. 7X-2568 M [16] BOLT (M20X2.5X180-MM)  
30. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
31. 1U-8846 B SEALANT-GASKET  
33. 148-4705 [1] GEAR-RING (104-TEETH)  
34. 7Y-1433 [1] CARRIER  
35. 6D-0692 [1] SEAL-O-RING  
36. 148-4715 [1] GEAR-COUPLING (55-TEETH)  
37. 114-1539 [6] PIN-DOWEL  
38. 191-3235 [1] HOUSING  
39. 168-8451 [2] BALL BEARING  
40. 114-1497 [1] SEAL GP-DUO-CONE  
41. 191-3236 [1] HOUSING  
42. 095-1270 M [2] SETSCREW-SOCKET (M12X1.75X30-MM)  
43. 148-4708 B [1] GEAR-RING (79-TEETH)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 320C :

WIRING GP-CAB
163-6623 WIRING GP-CAB
SWITCH GP-START
9G-7641 SWITCH GP-START
SWITCH GP-ROTARY
106-0107 SWITCH GP-ROTARY
SWITCH GP-REFUELING
5C-6108 SWITCH GP-REFUELING
SWITCH GP-MAGNETIC
259-5274 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
WIRING GP-COMMUNICATION
259-4879 WIRING GP-COMMUNICATION
170-6908 WIRING GP-CONSOLE
WIRING GP-CONSOLE
170-6909 WIRING GP-CONSOLE
WIRING GP-CONSOLE
170-6910 WIRING GP-CONSOLE
WIRING GP-CONVERTER
163-6629 WIRING GP-CONVERTER
WIRING GP-HAMMER
183-0993 WIRING GP-HAMMER
WIRING GP-REFUELING PUMP
163-6640 WIRING GP-REFUELING PUMP
DRIVE GP-FINAL
148-4696 DRIVE GP-FINAL

Truck sale:

 
 
Caterpillar 320C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
288,000 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Caterpillar 320C, Crawler Excavators, Construction
45,597 
Caterpillar 320C, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA
 
287,325 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
287,325 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.