258-9764 WIRING GP-ENGINE S/N MGS1-UP Type 2 FOR USE WITH RIGHT HAND MARINE DUAL ECM AN ATTACHMENT C18

258-9764: WIRING GP-ENGINE

258-9764 WIRING GP-ENGINE
S/N MGS1-UP
Type 2
FOR USE WITH RIGHT HAND MARINE DUAL ECM
AN ATTACHMENT

Parts for your C18 GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	3S-2093 B	[43]	STRAP-CABLE
2.	4H-1225	[2]	WASHER (11X22X6-MM THK)
3.	7Y-1924	[1]	SPACER (9X19X23-MM THK)
4.	108-5678	[1]	UNION
5.	117-0067	[1]	ELBOW
6.	264-4297	[4]	SENSOR AS-TEMPERATURE (2-PIN)(INLET AIR)
7.	132-9770	[1]	SPACER AS
	1W-6448	[2]	DOWEL
8.	161-1703	[1]	SENSOR GP-PRESSURE (CRANKCASE)
9.	161-1705	[1]	SENSOR AS-PRESSURE (ENGINE OIL)
11.	203-9609	[1]	HARNESS AS-ENGINE (PANEL INTERCONNECT)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	115-5674	[2]	BOOT (UNIT INJECTOR)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS & WEDGE)
	180-9340	[7]	SOCKET-CONNECTOR (14-GA TO 18-GA)
			(EACH INCLUDES)
	194-5226	[1]	WIRE AS (16-GA)
			-OR-
	194-5227	[1]	WIRE AS (14-GA)
12.	211-6833	[1]	BRACKET AS
	7C-2644	[1]	CLIP
	8C-3334	[2]	RIVET-TUBULAR
13.	255-6451	[1]	HARNESS AS-CONTROL
	102-8802	[4]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[4]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	6I-4347	[21]	BOOT (4-PIN)
	6I-4348	[2]	BOOT (40-PIN)
	186-3736	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	9X-6772	[4]	STRAP-CABLE
	115-5674	[2]	BOOT (UNIT INJECTOR)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(90-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(100-CM)
	126-1774	[2]	COVER-CONNECTOR
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	155-2260	[9]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	155-2270	[10]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	160-7690	[2]	PLUG AS-CONNECTOR (70-PIN)
			(EACH INCLUDES)
	159-9322	[1]	SEAL-O-RING
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	180-9340	[168]	SOCKET-CONNECTOR (14-GA TO 18-GA)
			(EACH INCLUDES)
	194-5226	[1]	WIRE AS (16-GA)
			-OR-
	194-5227	[1]	WIRE AS (14-GA)
14.	255-6452	[1]	HARNESS AS-CONTROL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[1]	STRAP-CABLE
	5P-6001 D		TUBE-HEAT SHRINK (4.75-MM DIA)(0.3-M)
	6I-4347	[3]	BOOT (4-PIN)
	6I-4348	[2]	BOOT (40-PIN)
	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
	8T-8736	[1]	RECEPTACLE-CONNECTOR (9-PIN)
	9X-6772	[4]	STRAP-CABLE
	103-0213	[1]	RECEPTACLE AS-CONNECTOR (70-PIN)
	115-5674	[3]	BOOT (UNIT INJECTOR)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(105-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(105-CM)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(25-CM)
	126-1774	[2]	COVER-CONNECTOR
	133-0967	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	133-0969	[2]	CONNECTOR-SOCKET (16-GA TO 18-GA)
	153-2707 E		CABLE-ELECTRICAL (2-CONDUCTOR, 18-GA)(325-CM)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS & WEDGE)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	160-7689	[2]	PLUG AS-CONNECTOR (70-PIN)
			(EACH INCLUDES)
	159-9322	[1]	SEAL-O-RING
	180-9340	[73]	SOCKET-CONNECTOR (14-GA TO 18-GA)
			(EACH INCLUDES)
	194-5226	[1]	WIRE AS (16-GA)
			-OR-
	194-5227	[1]	WIRE AS (14-GA)
	208-0432	[1]	PLUG
15.	263-2732	[2]	WIRE AS
16.	0S-0509	[4]	BOLT (3/8-16X0.75-IN)
17.	0S-1588	[3]	BOLT (3/8-16X1.25-IN)
18.	0S-1591	[1]	BOLT (3/8-16X1.5-IN)
19.	0S-1594	[2]	BOLT (3/8-16X1-IN)
21.	132-5789 C	[10]	CLIP (LADDER)
22.	191-8303 Y	[1]	SENSOR GP-SPEED (TIMING, CRANKSHAFT)
23.	1A-2029	[2]	BOLT (3/8-16X1.125-IN)
24.	201-6617 Y	[1]	SENSOR GP-SPEED (TIMING, CAMSHAFT)
25.	218-3840 Y	[1]	SENSOR GP-PRESSURE (BOOST)
26.	2H-3755	[2]	BOLT (5/16-18X0.43-IN)
27.	3P-0647	[2]	SEAL-O-RING
28.	3P-1155	[1]	SEAL-O-RING
29.	4B-5324	[4]	WASHER (3.9X9.6X1.2-MM THK)
30.	4L-6454	[2]	BOLT (3/8-16X1-IN)
31.	4P-7581	[4]	CLIP (LADDER)
32.	4P-8134 C	[10]	CLIP (LADDER)
33.	5P-7854	[4]	CLIP (LOOP)
34.	5M-2894	[12]	WASHER-HARD (10.2X18.5X2.5-MM THK)
35.	6V-5048	[5]	SEAL-O-RING
36.	214-7568	[2]	SEAL-O-RING
37.	6V-8189	[1]	NUT (5/16-18-THD)
38.	6V-8801	[8]	NUT (3/8-16-THD)
39.	8L-2786	[4]	SEAL-O-RING
40.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
41.	8T-4896	[10]	WASHER-HARD (10.2X18.5X2.5-MM THK)
42.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
43.	223-1624 C	[1]	ELBOW
44.	9X-6258	[4]	SCREW-MACHINE (6-32X0.5-IN)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

263-5505: WIRING GP-ENGINE

WIRING GP-ENGINE

263-5505 WIRING GP-ENGINE
S/N MGS1-UP
INCLUDES MAG SENSOR CONNECTOR
Type 1
FOR USE WITH RIGHT HAND SERVICE MARINE GEN SET
AN ATTACHMENT

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 B	[23]	STRAP-CABLE
2.	4H-1225	[2]	WASHER (11X22X6-MM THK)
3.	117-0067	[2]	ELBOW
4.	130-9811	[1]	SENSOR GP-TEMPERATURE (INLET AIR)
4A.	130-9811	[1]	SENSOR GP-TEMPERATURE (FUEL OUTLET)
4B.	130-9811	[1]	SENSOR GP-TEMPERATURE (FUEL)
4C.	130-9811	[1]	SENSOR GP-TEMPERATURE (COOLANT)
5.	132-9770	[1]	SPACER AS
	1W-6448	[2]	DOWEL
6.	161-1703	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC AIR)
7.	161-1704	[1]	SENSOR GP-PRESSURE (INLET MANIFOLD)
8.	161-1705	[1]	SENSOR AS-PRESSURE (ENGINE OIL)
8A.	161-1705	[1]	SENSOR AS-PRESSURE (FUEL)
9.	203-9610	[1]	HARNESS AS-WIRING (JUMPER)
10.	246-0531	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[2]	STRAP-CABLE
	6I-4347	[12]	BOOT (4-PIN)
	6I-4348	[1]	BOOT (40-PIN)
	115-5674	[1]	BOOT (UNIT INJECTOR)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	126-1774	[1]	COVER-CONNECTOR
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS & WEDGE)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	194-5226	[1]	WIRE AS (16-GA)
			-OR-
	194-5227	[1]	WIRE AS (14-GA)
11.	263-5508	[1]	HARNESS AS-ENGINE (MAGNET SWITCH, RELAY)
	208-0432	[1]	PLUG
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[3]	STRAP-CABLE
	5P-6001 D		TUBE-HEAT SHRINK (4.75-MM DIA)(0.3-M)
	6I-4347	[2]	BOOT (4-PIN)
	6I-4348	[2]	BOOT (40-PIN)
	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
	8T-8736	[1]	RECEPTACLE-CONNECTOR (9-PIN)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	115-5674	[1]	BOOT (UNIT INJECTOR)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(25-CM)
	126-1768	[7]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1774	[1]	COVER-CONNECTOR
	133-0967	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	133-0969	[1]	CONNECTOR-SOCKET (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	194-5226	[1]	WIRE AS (16-GA)
			-OR-
	194-5227	[1]	WIRE AS (14-GA)
12.	263-6095	[1]	BRACKET AS
	7C-2644	[1]	CLIP
	8C-3334	[2]	RIVET-TUBULAR
13.	0S-0509	[1]	BOLT (3/8-16X0.75-IN)
14.	0S-1588	[1]	BOLT (3/8-16X1.25-IN)
15.	0S-1591	[1]	BOLT (3/8-16X1.5-IN)
16.	104-6202	[1]	CLIP (LADDER)
17.	132-5789	[2]	CLIP (LADDER)
18.	165-3929	[1]	BOLT (3/8-16X1.5-IN)
19.	194-5341	[1]	SENSOR GP-SPEED (SECONDARY, ENGINE TIMING)
20.	194-5338	[1]	SENSOR GP-SPEED (PRIMARY, ENGINE TIMING)
21.	1A-2029	[2]	BOLT (3/8-16X1.125-IN)
22.	2H-3755	[2]	BOLT (5/16-18X0.43-IN)
23.	3P-0647	[2]	SEAL-O-RING
24.	3P-1155	[1]	SEAL-O-RING
25.	4B-5324	[4]	WASHER (3.9X9.6X1.2-MM THK)
26.	4P-7581	[4]	CLIP (LADDER)
27.	4P-8134	[7]	CLIP (LADDER)
28.	5M-2894	[10]	WASHER-HARD (10.2X18.5X2.5-MM THK)
29.	5P-8247	[1]	WASHER-HARD (17X32X3.5-MM THK)
30.	6F-7316	[1]	BOLT (5/8-18X1-IN)
31.	6V-5048	[5]	SEAL-O-RING
32.	6V-5049	[1]	SEAL-O-RING
33.	6V-6609	[1]	SEAL-O-RING
34.	8L-2786	[3]	SEAL-O-RING
35.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
36.	9S-8752	[2]	NUT-FULL (3/8-16-THD)
37.	9X-0261	[1]	ADAPTER
38.	9X-6258	[4]	SCREW-MACHINE (6-32X0.5-IN)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER

263-5505: WIRING GP-ENGINE

WIRING GP-ENGINE

263-5505 WIRING GP-ENGINE
S/N MGS1-UP
INCLUDES MAG SENSOR CONNECTOR
Type 2
FOR USE WITH RIGHT HAND SERVICE MARINE GEN SET
AN ATTACHMENT

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 BC	[24]	STRAP-CABLE
2.	4H-1225	[2]	WASHER (11X22X6-MM THK)
3.	117-0067	[2]	ELBOW
4.	264-4297 C	[1]	SENSOR AS-TEMPERATURE (2-PIN)(INLET AIR)
4A.	264-4297 C	[1]	SENSOR AS-TEMPERATURE (2-PIN)(FUEL OUTLET)
4B.	264-4297 C	[1]	SENSOR AS-TEMPERATURE (2-PIN)(FUEL)
4C.	264-4297 C	[1]	SENSOR AS-TEMPERATURE (2-PIN)(COOLANT)
5.	132-9770	[1]	SPACER AS
	1W-6448	[2]	DOWEL
6.	161-1703	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC AIR)
7.	161-1704	[1]	SENSOR GP-PRESSURE (INLET MANIFOLD)
8.	161-1705	[1]	SENSOR AS-PRESSURE (ENGINE OIL)
8A.	161-1705	[1]	SENSOR AS-PRESSURE (FUEL)
9.	203-9610	[1]	HARNESS AS-WIRING (JUMPER)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS, WEDGE, & INTERFACE SEAL)
	6I-4347	[2]	BOOT (4-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	180-9340	[3]	SOCKET-CONNECTOR (14-GA TO 18-GA)
10.	246-0531	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS, WEDGE, & INTERFACE SEAL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS, WEDGE, & INTERFACE SEAL)
	3S-2093	[2]	STRAP-CABLE
	6I-4347	[12]	BOOT (4-PIN)
	6I-4348	[1]	BOOT (40-PIN)
	115-5674	[1]	BOOT (UNIT INJECTOR)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	126-1774	[1]	COVER-CONNECTOR
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL0
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	194-5226	[1]	WIRE AS (16-GA)
			-OR-
	194-5227	[1]	WIRE AS (14-GA)
11.	263-5508	[1]	HARNESS AS-ENGINE (MAGNET SWITCH, RELAY)
	208-0432	[1]	PLUG
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS, WEDGE, & INTERFACE SEAL)
	3S-2093	[3]	STRAP-CABLE
	5P-6001 D		TUBE-HEAT SHRINK (4.75-MM DIA)(0.3-M)
	6I-4347	[2]	BOOT (4-PIN)
	6I-4348	[2]	BOOT (40-PIN)
	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
	8T-8736	[1]	RECEPTACLE-CONNECTOR (9-PIN)
	8T-8737	[62]	PLUG-SEAL
	126-1767	[10]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	115-5674	[1]	BOOT (UNIT INJECTOR)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(25-CM)
	126-1768	[7]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1774	[1]	COVER-CONNECTOR
	133-0967	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	133-0969	[1]	CONNECTOR-SOCKET (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	194-5226	[1]	WIRE AS (16-GA)
			-OR-
	194-5227	[1]	WIRE AS (14-GA)
12.	263-6095	[1]	BRACKET AS
	7C-2644	[1]	CLIP
	8C-3334	[2]	RIVET-TUBULAR
13.	0S-0509	[1]	BOLT (3/8-16X0.75-IN)
14.	0S-1588	[1]	BOLT (3/8-16X1.25-IN)
15.	0S-1591	[1]	BOLT (3/8-16X1.5-IN)
17.	132-5789	[2]	CLIP (LADDER)
18.	165-3929	[1]	BOLT (3/8-16X1.5-IN)
19.	188-7513	[1]	SENSOR GP-SPEED (SECONDARY, ENGINE TIMING)
20.	191-8303	[1]	SENSOR GP-SPEED (PRIMARY, ENGINE TIMING)
21.	1A-2029	[2]	BOLT (3/8-16X1.125-IN)
22.	2H-3755	[2]	BOLT (5/16-18X0.43-IN)
23.	3P-0647	[2]	SEAL-O-RING
24.	3P-1155	[1]	SEAL-O-RING
25.	4B-5324	[4]	WASHER (3.9X9.6X1.2-MM THK)
26.	4P-7581	[4]	CLIP (LADDER)
27.	4P-8134	[7]	CLIP (LADDER)
28.	5M-2894	[10]	WASHER-HARD (10.2X18.5X2.5-MM THK)
29.	5P-8247	[1]	WASHER-HARD (17X32X3.5-MM THK)
30.	6F-7316	[1]	BOLT (5/8-18X1-IN)
31.	6V-5048	[5]	SEAL-O-RING
32.	214-7568	[1]	SEAL-O-RING
33.	6V-6609	[1]	SEAL-O-RING
34.	8L-2786	[3]	SEAL-O-RING
35.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
36.	9S-8752	[2]	NUT-FULL (3/8-16-THD)
38.	9X-6258	[4]	SCREW-MACHINE (6-32X0.5-IN)
39.	223-1624 C	[1]	ELBOW

	3S-2093 F	[1]	STRAP-CABLE
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN

263-5518: WIRING GP-ENGINE

WIRING GP-ENGINE

263-5518 WIRING GP-ENGINE
S/N MGS1-UP
PROVIDES MAG SENSOR CONNECTOR FOR A LEFT HAND SERVICE MARINE GEN SET ENGINE
Type 1
AN ATTACHMENT

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 B	[18]	STRAP-CABLE
2.	4H-1225	[2]	WASHER (11X22X6-MM THK)
3.	108-5678	[1]	UNION
4.	117-0067	[1]	ELBOW
5.	130-9811	[1]	SENSOR GP-TEMPERATURE (INLET AIR)
5A.	130-9811	[1]	SENSOR GP-TEMPERATURE (FUEL OUTLET)
5B.	130-9811	[1]	SENSOR GP-TEMPERATURE (FUEL)
5C.	130-9811	[1]	SENSOR GP-TEMPERATURE (COOLANT)
6.	132-9770	[1]	SPACER AS
	1W-6448	[2]	DOWEL
7.	161-1703	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC AIR)
8.	161-1704	[1]	SENSOR GP-PRESSURE (AIR INLET MANIFOLD)
9.	161-1705	[1]	SENSOR AS-PRESSURE (ENGINE OIL)
9A.	161-1705	[1]	SENSOR AS-PRESSURE (FUEL)
10.	246-0531	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[2]	STRAP-CABLE
	6I-4347	[12]	BOOT (4-PIN)
	6I-4348	[1]	BOOT (40-PIN)
	115-5674	[1]	BOOT (UNIT INJECTOR)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	126-1774	[1]	COVER-CONNECTOR
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS & WEDGE)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	194-5226	[1]	WIRE AS (16-GA)
			-OR-
	194-5227	[1]	WIRE AS (14-GA)
11.	263-5508	[1]	HARNESS AS-ENGINE (MAGNET SWITCH, RELAY)
	208-0432	[1]	PLUG
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[3]	STRAP-CABLE
	5P-6001 D		TUBE-HEAT SHRINK (4.75-MM DIA)(0.3-M)
	6I-4347	[2]	BOOT (4-PIN)
	6I-4348	[2]	BOOT (40-PIN)
	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
	8T-8736	[1]	RECEPTACLE-CONNECTOR (9-PIN)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	115-5674	[1]	BOOT (UNIT INJECTOR)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(25-CM)
	126-1768	[7]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1774	[1]	COVER-CONNECTOR
	133-0967	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	133-0969	[1]	CONNECTOR-SOCKET (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	194-5226	[1]	WIRE AS (16-GA)
			-OR-
	194-5227	[1]	WIRE AS (14-GA)
12.	263-6095	[1]	BRACKET AS
	7C-2644	[1]	CLIP
	8C-3334	[2]	RIVET-TUBULAR
13.	0S-0509	[1]	BOLT (3/8-16X0.75-IN)
14.	0S-1588	[1]	BOLT (3/8-16X1.25-IN)
15.	0S-1591	[1]	BOLT (3/8-16X1.5-IN)
17.	132-5789	[2]	CLIP (LADDER)
18.	165-3929	[1]	BOLT (3/8-16X1.5-IN)
19.	194-5341	[1]	SENSOR GP-SPEED (SECONDARY, ENGINE TIMING)
20.	194-5338	[1]	SENSOR GP-SPEED (PRIMARY, ENGINE TIMING)
21.	1A-2029	[2]	BOLT (3/8-16X1.125-IN)
22.	2H-3755	[2]	BOLT (5/16-18X0.43-IN)
23.	3P-0647	[2]	SEAL-O-RING
24.	3P-1155	[1]	SEAL-O-RING
25.	4B-5324	[4]	WASHER (3.9X9.6X1.2-MM THK)
26.	4P-7581	[2]	CLIP (LADDER)
27.	4P-8134	[6]	CLIP (LADDER)
28.	5M-2894	[10]	WASHER-HARD (10.2X18.5X2.5-MM THK)
29.	6V-5048	[5]	SEAL-O-RING
30.	6V-5049	[2]	SEAL-O-RING
31.	8L-2786	[4]	SEAL-O-RING
32.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
33.	9S-8752	[2]	NUT-FULL (3/8-16-THD)
34.	9X-0261	[1]	ADAPTER
35.	9X-6258	[4]	SCREW-MACHINE (6-32X0.5-IN)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER

263-5518: WIRING GP-ENGINE

WIRING GP-ENGINE

263-5518 WIRING GP-ENGINE
S/N MGS1-UP
PROVIDES MAG SENSOR CONNECTOR FOR A LEFT HAND SERVICE MARINE GEN SET ENGINE
Type 2
AN ATTACHMENT

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 B	[18]	STRAP-CABLE
2.	4H-1225	[2]	WASHER (11X22X6-MM THK)
3.	108-5678	[1]	UNION
4.	117-0067	[1]	ELBOW
5.	264-4297 C	[1]	SENSOR AS-TEMPERATURE (2-PIN)(INLET AIR)
5A.	264-4297 C	[1]	SENSOR AS-TEMPERATURE (2-PIN)(FUEL OUTLET)
5B.	264-4297 C	[1]	SENSOR AS-TEMPERATURE (2-PIN)(FUEL)
5C.	264-4297 C	[1]	SENSOR AS-TEMPERATURE (2-PIN)(COOLANT)
6.	132-9770	[1]	SPACER AS
	1W-6448	[2]	DOWEL
7.	161-1703	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC AIR)
8.	161-1704	[1]	SENSOR GP-PRESSURE (AIR INLET MANIFOLD)
9.	161-1705	[1]	SENSOR AS-PRESSURE (ENGINE OIL)
9A.	161-1705	[1]	SENSOR AS-PRESSURE (FUEL)
10.	246-0531	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS, WEDGE, & INTERFACE SEAL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS, WEDGE, & INTERFACE SEAL)
	3S-2093	[2]	STRAP-CABLE
	6I-4347	[12]	BOOT (4-PIN)
	6I-4348	[1]	BOOT (40-PIN)
	115-5674	[1]	BOOT (UNIT INJECTOR)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	126-1774	[1]	COVER-CONNECTOR
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	194-5226	[1]	WIRE AS (16-GA)
			-OR-
	194-5227	[1]	WIRE AS (14-GA)
11.	263-5508	[1]	HARNESS AS-ENGINE (MAGNET SWITCH, RELAY)
	208-0432	[1]	PLUG
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS, WEDGE, & INTERFACE SEAL)
	3S-2093	[3]	STRAP-CABLE
	5P-6001 D		TUBE-HEAT SHRINK (4.75-MM DIA)(0.3-M)
	6I-4347	[2]	BOOT (4-PIN)
	6I-4348	[2]	BOOT (40-PIN)
	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
	8T-8736	[1]	RECEPTACLE-CONNECTOR (9-PIN)
	8T-8737	[62]	PLUG-SEAL
	126-1767	[10]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	115-5674	[1]	BOOT (UNIT INJECTOR)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(25-CM)
	126-1768	[7]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1774	[1]	COVER-CONNECTOR
	133-0967	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	133-0969	[1]	CONNECTOR-SOCKET (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	194-5226	[1]	WIRE AS (16-GA)
			-OR-
	194-5227	[1]	WIRE AS (14-GA)
12.	263-6095	[1]	BRACKET AS
	7C-2644	[1]	CLIP
	8C-3334	[2]	RIVET-TUBULAR
13.	0S-0509	[1]	BOLT (3/8-16X0.75-IN)
14.	0S-1588 C	[2]	BOLT (3/8-16X1.25-IN)
15.	0S-1591	[1]	BOLT (3/8-16X1.5-IN)
17.	132-5789	[2]	CLIP (LADDER)
18.	165-3929	[1]	BOLT (3/8-16X1.5-IN)
19.	188-7513	[1]	SENSOR GP-SPEED (SECONDARY, ENGINE TIMING)
20.	191-8303	[1]	SENSOR GP-SPEED (PRIMARY, ENGINE TIMING)
21.	1A-2029	[2]	BOLT (3/8-16X1.125-IN)
22.	2H-3755	[2]	BOLT (5/16-18X0.43-IN)
23.	3P-0647	[2]	SEAL-O-RING
24.	3P-1155	[1]	SEAL-O-RING
25.	4B-5324	[4]	WASHER (3.9X9.6X1.2-MM THK)
26.	4P-7581	[2]	CLIP (LADDER)
27.	4P-8134	[6]	CLIP (LADDER)
28.	5M-2894	[10]	WASHER-HARD (10.2X18.5X2.5-MM THK)
29.	6V-5048	[5]	SEAL-O-RING
30.	214-7568	[2]	SEAL-O-RING
31.	8L-2786	[4]	SEAL-O-RING
32.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
33.	9S-8752	[2]	NUT-FULL (3/8-16-THD)
35.	9X-6258	[4]	SCREW-MACHINE (6-32X0.5-IN)

	223-1624 CF	[1]	ELBOW
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN

281-8675: WIRING GP-ENGINE

WIRING GP-ENGINE

281-8675 WIRING GP-ENGINE
S/N MGS1-UP
Type 1
AN ATTACHMENT

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[11]	STRAP-CABLE
2.	4H-1225	[3]	WASHER (11X22X6-MM THK)
3.	9X-6772	[2]	STRAP-CABLE
4.	263-6095	[1]	BRACKET AS
	7C-2644	[1]	CLIP
	8C-3334	[2]	RIVET-TUBULAR
5.	281-8684 Y	[3]	SENSOR GP-TEMPERATURE
6.	284-2293 Y	[1]	CONDUIT GP-ELECTRICAL (ENGINE ECM, J1)
7.	284-2294 Y	[1]	CONDUIT GP-ELECTRICAL (ENGINE ECM, J2)
8.	284-2305 Y	[1]	CONDUIT GP-ELECTRICAL (FUEL)
9.	0S-0509	[1]	BOLT (3/8-16X0.75-IN)
10.	0S-1588	[2]	BOLT (3/8-16X1.25-IN)
11.	132-5789	[2]	CLIP (LADDER)
12.	1A-2029	[3]	BOLT (3/8-16X1.125-IN)
13.	4P-7429	[1]	CLIP (LADDER)
14.	4P-7581	[2]	CLIP (LADDER)
15.	4P-8134	[4]	CLIP (LADDER)
16.	5M-2894	[6]	WASHER-HARD (10.2X18.5X2.5-MM THK)
17.	6V-8801	[1]	NUT (3/8-16-THD)
	Y		SEPARATE ILLUSTRATION

281-8675: WIRING GP-ENGINE

WIRING GP-ENGINE

281-8675 WIRING GP-ENGINE
S/N MGS1-UP
Type 2
AN ATTACHMENT

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[18]	STRAP-CABLE
2.	4H-1225	[3]	WASHER (11X22X6-MM THK)
3.	263-6095	[1]	BRACKET AS
	7C-2644	[1]	CLIP
	8C-3334	[2]	RIVET-TUBULAR
4.	277-1873 C	[2]	CLIP (LADDER)
5.	284-2293 Y	[1]	CONDUIT GP-ELECTRICAL (ENGINE ECM, J1)
6.	284-2294 Y	[1]	CONDUIT GP-ELECTRICAL (ENGINE ECM, J2)
7.	284-2305 Y	[1]	CONDUIT GP-ELECTRICAL (FUEL)
8.	305-2366 CY	[1]	SENSOR GP-ENGINE (FUEL TEMPERATURE)
9.	0S-0509 C	[2]	BOLT (3/8-16X0.75-IN)
10.	0S-1588	[2]	BOLT (3/8-16X1.25-IN)
11.	132-5789 C	[4]	CLIP (LADDER)
12.	1A-2029	[3]	BOLT (3/8-16X1.125-IN)
13.	4P-7429	[1]	CLIP (LADDER)
14.	4P-7581 C	[3]	CLIP (LADDER)
15.	4P-8134 C	[5]	CLIP (LADDER)
16.	5M-2894 C	[7]	WASHER-HARD (10.2X18.5X2.5-MM THK)
17.	5M-3062 C	[1]	BOLT (3/8-16X0.75-IN)
18.	6V-8801	[1]	NUT (3/8-16-THD)
19.	8T-4896 C	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

281-8683: WIRING GP-ENGINE

WIRING GP-ENGINE

281-8683 WIRING GP-ENGINE
S/N CYG1-UP
AN ATTACHMENT

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	6T-3645 Y	[1]	CIRCUIT BREAKER GP (60-AMPERE)
3.	284-2308	[1]	WIRING GP-ENGINE
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(15-CM)
	231-9895 E		CONDUIT-FLEXIBLE (21.9-MM ID)(179-CM)
	267-6194	[1]	FITTING-TEE
	291-1949	[1]	HARNESS AS-POWER
4.	132-5789	[1]	CLIP (LADDER)
5.	0S-0509	[1]	BOLT (3/8-16X0.75-IN)
6.	3K-8106	[2]	SCREW-MACHINE (8-32X1-IN)
7.	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
8.	4P-8134	[1]	CLIP (LADDER)
9.	5M-2894	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	E		ORDER BY THE CENTIMETER
	Y		SEPARATE ILLUSTRATION

328-5545: WIRING GP-ENGINE

WIRING GP-ENGINE

328-5545 WIRING GP-ENGINE -ELECTRONIC CONTROL
S/N MGS1-UP
PROVIDES A WIRING GP WITH STARTER MOTOR MAG SWITCH MOUNT AND MAG SENSOR CONNECTION FOR LH SERVICE
Type 1
AN ATTACHMENT

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 B	[18]	STRAP-CABLE
2.	246-0531	[1]	HARNESS AS-ENGINE
3.	263-5508	[1]	HARNESS AS-ENGINE
4.	263-6095	[1]	BRACKET AS
	8C-3334	[2]	RIVET-TUBULAR
5.	0S-0509	[2]	BOLT (3/8-16X0.75-IN)
6.	0S-1588	[1]	BOLT (3/8-16X1.25-IN)
7.	132-5789	[2]	CLIP (LADDER)
8.	165-3929	[1]	BOLT (3/8-16X1.5-IN)
9.	1A-2029	[2]	BOLT (3/8-16X1.125-IN)
10.	214-7568	[2]	SEAL-O-RING
11.	304-5666 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC)
12.	4B-5324	[4]	WASHER (3.9X9.6X1.2-MM THK)
13.	4P-7581	[2]	CLIP (LADDER)
14.	4P-8134	[5]	CLIP (LADDER)
15.	5M-2894	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
16.	6V-0484	[1]	ELBOW
17.	8M-9124	[2]	WASHER (10X22.5X8-MM THK)
18.	9S-8752	[2]	NUT-FULL (3/8-16-THD)
19.	9X-6258	[4]	SCREW-MACHINE (6-32X0.5-IN)
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION

328-5545: WIRING GP-ENGINE

WIRING GP-ENGINE

328-5545 WIRING GP-ENGINE -ELECTRONIC CONTROL
S/N MGS1-UP
PROVIDES A WIRING GP WITH STARTER MOTOR MAG SWITCH MOUNT AND MAG SENSOR CONNECTION FOR LH SERVICE
Type 2
AN ATTACHMENT

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 BC	[19]	STRAP-CABLE
2.	246-0531	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(6.3-M)
	3S-2093	[2]	STRAP-CABLE
	6I-4347	[12]	BOOT (4-PIN)
	6I-4348	[1]	BOOT (40-PIN)
	8T-8737	[51]	PLUG-SEAL
	115-5674	[1]	BOOT (UNIT INJECTOR)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	126-1774	[1]	COVER-CONNECTOR
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
3.	263-5508	[1]	HARNESS AS-ENGINE (MAGNET SWITCH, RELAY)
	5P-6001 D		TUBE-HEAT SHRINK (4.75-MM DIA)(0.3-M)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-3401	[25]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[25]	PIN-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[3]	STRAP-CABLE
	6I-4347	[2]	BOOT (4-PIN)
	6I-4348	[2]	BOOT (40-PIN)
	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
	8T-8736	[1]	RECEPTACLE-CONNECTOR (9-PIN)
	8T-8737	[62]	PLUG-SEAL
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	115-5674	[1]	BOOT (UNIT INJECTOR)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(25-CM)
	126-1767	[10]	PIN-CONNECTOR (14-GA TO 16-GA)
	126-1768	[7]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1774	[1]	COVER-CONNECTOR
	133-0967	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	133-0969	[1]	CONNECTOR-SOCKET (16-GA TO 18-GA)
	153-2707 E		CABLE-ELECTRICAL (2-CONDUCTOR, 18-GA)(224-CM)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	208-0432	[1]	PLUG
4.	263-6095	[1]	BRACKET AS
	7C-2644	[1]	CLIP
	8C-3334	[2]	RIVET-TUBULAR
5.	5M-3062 C	[3]	BOLT (3/8-16X0.75-IN)
7.	132-5789	[2]	CLIP (LADDER)
9.	5S-7382 C	[2]	BOLT (3/8-16X1.375-IN)
10.	214-7568	[2]	SEAL-O-RING
11.	304-5666 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC)
12.	4B-5324	[4]	WASHER (3.9X9.6X1.2-MM THK)
13.	4P-7581	[2]	CLIP (LADDER)
14.	4P-8134 C	[4]	CLIP (LADDER)
15.	8T-4896 C	[7]	WASHER-HARD (10.2X18.5X2.5-MM THK)
16.	6V-0484	[1]	ELBOW
17.	7X-0732 C	[2]	WASHER-HARD (10X22.5X8-MM THK)
18.	6V-8801 C	[2]	NUT (3/8-16-THD)
19.	9X-6258	[4]	SCREW-MACHINE (6-32X0.5-IN)
20.	5P-8247 C	[1]	WASHER-HARD (17X32X3.5-MM THK)
21.	6F-7316 C	[1]	BOLT (5/8-18X1-IN)
22.	104-6202 C	[1]	CLIP (LADDER)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

New Control Panel Films Show That SR4B Generators Are Not To Be Wired In The Delta Configuration{7557,7566}
1999/04/01

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Grounding Design Guide for Electric Power Generation Products {4450, 4459}
Grounding Design Guide for Electric Power Generation Products {4450, 4459}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Procedure for Installing Continuous Telematics Power Retrofit (CTPR) for Electric Power{7606}
Procedure for Installing Continuous Telematics Power Retrofit (CTPR) for Electric Power{7606}

Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}

Schematic

Schematics & Wiring Diagrams
ELECTRONIC MODULAR CONTROL PANEL II (EMCP II)

Schematics & Wiring Diagrams
CATERPILLAR SWITCHGEAR

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Wiring Harness
PL1000E Communication ECM

Wiring Harness
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T

Testing and Adjusting

Electrical Connector - Inspect
PL1000E Communication ECM

Wiring Harness (Open Circuit) - Test
PL1000E Communication ECM

Wiring Harness (Short Circuit) - Test
PL1000E Communication ECM

Electrical Connector - Inspect
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T

Wiring Harness (Open Circuit) - Test
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T

Wiring Harness (Short Circuit) - Test
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T

Troubleshooting

Connector Locations
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T

Connector Locations
PL1000E Communication ECM

Service Magazine

Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21