AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

C15 Standby Generator Set C5H00001-UP BASIC ENGINE Caterpillar SIS



GENERATOR SET C15 GENERATOR SET C5H
 C15 Standby Generator Set C5H00001-UP SEBP4325 C15 C5H   (2005)

Parts group C15:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
COVER GP-AIR COMPRESSOR
223-4730 COVER GP-AIR COMPRESSOR
223-4730 COVER GP-AIR COMPRESSOR
S/N FFH1-UP; FTH1-UP
A COVER FOR THE AIR COMPRESSOR PILOT HOLE IN THE FRONT PLATE WHEN AN AIR COMPRESSOR IS NOT USED
COVER GP-AIR COMPRESSOR
311-3201 COVER GP-AIR COMPRESSOR
311-3201 COVER GP-AIR COMPRESSOR
S/N FFH3089-UP; FTH1-UP
VALVE-CHECK
447-1817 VALVE-CHECK
447-1817 VALVE-CHECK
S/N C5H1-UP
AN ATTACHMENT
VALVE-CHECK
447-3733 VALVE-CHECK
447-3733 VALVE-CHECK
S/N C5H1-UP
AN ATTACHMENT
CAMSHAFT GP
CAMSHAFT GP
243-0551 CAMSHAFT GP
243-0551 CAMSHAFT GP
S/N FFH1-UP; FTH1-UP
GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
S/N FFH1-UP; FTH1-UP
DUAL CAM SENSORS
PART OF 207-0449, 208-9490 GEAR GP-FRONT
COUPLING GP
COUPLING GP-GENERATOR
233-9351 COUPLING GP-GENERATOR
233-9351 COUPLING GP-GENERATOR
S/N C5H1-UP
AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
223-9731 CRANKSHAFT GP
223-9731 CRANKSHAFT GP
S/N FFH1-UP; FTH1-UP
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT -REAR
S/N FFH1-UP; FTH1-UP
PART OF 135-7634, 223-4738 HOUSING GP-FLYWHEEL
FOR USE WITH CCW ROTATION
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N FFH1-UP; FTH1-UP
PART OF 223-9731 CRANKSHAFT GP
FOR USE WITH CW ROTATION
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
178-7074 COVER GP-CYLINDER BLOCK
178-7074 COVER GP-CYLINDER BLOCK
S/N FFH1-UP; FTH1-UP
COVER GP-CYLINDER BLOCK
232-6635 COVER GP-CYLINDER BLOCK
232-6635 COVER GP-CYLINDER BLOCK
S/N FFH1-UP; FTH1-UP
CYLINDER BLOCK AS
267-4631 CYLINDER BLOCK AS
267-4631 CYLINDER BLOCK AS
S/N FFH112-UP; FTH1-UP
PART OF 267-4632 CYLINDER BLOCK AS
CYLINDER BLOCK AS
267-4632 CYLINDER BLOCK AS
267-4632 CYLINDER BLOCK AS
S/N FFH112-UP; FTH1-UP
PART OF 223-9252 CYLINDER BLOCK GP
CYLINDER BLOCK AS
357-1317 CYLINDER BLOCK AS
357-1317 CYLINDER BLOCK AS
S/N FFH112-UP; FTH1-UP
PART OF 223-9252 CYLINDER BLOCK GP
CYLINDER BLOCK GP
223-9252 CYLINDER BLOCK GP
223-9252 CYLINDER BLOCK GP
S/N FFH1-111
CYLINDER BLOCK GP
223-9252 CYLINDER BLOCK GP
223-9252 CYLINDER BLOCK GP
S/N FFH112-UP; FTH1-UP
Type 1
CYLINDER BLOCK GP
223-9252 CYLINDER BLOCK GP
223-9252 CYLINDER BLOCK GP
S/N FFH112-UP; FTH1-UP
Type 2
CYLINDER BLOCK GP
234-5997 CYLINDER BLOCK GP
234-5997 CYLINDER BLOCK GP
S/N FFH1-111
ACERT, 14.6 LITER
PART OF 223-9252 CYLINDER BLOCK GP
PLUG GP-CYLINDER BLOCK
230-5379 PLUG GP-CYLINDER BLOCK
230-5379 PLUG GP-CYLINDER BLOCK
S/N FFH1-UP; FTH1-UP
PLUG GP-CYLINDER BLOCK
234-9183 PLUG GP-CYLINDER BLOCK
234-9183 PLUG GP-CYLINDER BLOCK
S/N FFH1-UP
PLUG GP-CYLINDER BLOCK
305-9196 PLUG GP-CYLINDER BLOCK
305-9196 PLUG GP-CYLINDER BLOCK
S/N FFH112-UP; FTH1-UP
PART OF 223-9252 CYLINDER BLOCK GP
CYLINDER HEAD GP
CYLINDER HEAD AS
223-7263 CYLINDER HEAD AS
223-7263 CYLINDER HEAD AS
S/N FFH1-UP
WITH PRE-FINISHED VALVE SEAT INSERTS
PART OF 223-9250 CYLINDER HEAD GP
CYLINDER HEAD AS
281-1640 CYLINDER HEAD AS
281-1640 CYLINDER HEAD AS
S/N FFH1-UP
PART OF 263-5055 CYLINDER HEAD GP
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
S/N FFH1-UP
FOR 2300 RPM APLICATIONS FEILD REPLACEMENT 380-9100 CYLINDER HEAD IS AVALIBLE
PART OF 234-9185, 262-7996 CYLINDER HEAD GP
CYLINDER HEAD GP
234-9185 CYLINDER HEAD GP
234-9185 CYLINDER HEAD GP
S/N FFH1-1372
Type 1
CYLINDER HEAD GP
234-9185 CYLINDER HEAD GP
234-9185 CYLINDER HEAD GP
S/N FFH1-1372
Type 2
CYLINDER HEAD GP
262-7996 CYLINDER HEAD GP
262-7996 CYLINDER HEAD GP
S/N FFH1-UP
CYLINDER HEAD GP
263-5055 CYLINDER HEAD GP
263-5055 CYLINDER HEAD GP
S/N FFH1-UP
PART OF 234-9185 CYLINDER HEAD GP
CYLINDER HEAD GP
314-7316 CYLINDER HEAD GP
314-7316 CYLINDER HEAD GP
S/N FFH1303-UP; FTH1-UP
PLUG GP-CYLINDER HEAD
229-6711 PLUG GP-CYLINDER HEAD
229-6711 PLUG GP-CYLINDER HEAD
S/N FFH1-UP; FTH1-UP
FOR USE WITH AIR COMPRESSOR COVER GROUP IF NO AIR COMPRESSOR
DAMPER GP
DAMPER GP
231-5385 DAMPER GP
231-5385 DAMPER GP
S/N FFH243-UP; FTH1-UP
ALSO AN ATTACHMENT
DAMPER GP
262-1758 DAMPER GP
262-1758 DAMPER GP
S/N FFH1-UP
DRIVE GP-FAN
DRIVE GP-FAN
232-6577 DRIVE GP-FAN
232-6577 DRIVE GP-FAN
S/N FFH1-UP; FTH1-UP
DRIVE GP-FAN
254-5858 DRIVE GP-FAN
254-5858 DRIVE GP-FAN
S/N FFH1-UP; FTH1-UP
DRIVE GP-PUMP
ADAPTER GP-PUMP DRIVE
133-9907 ADAPTER GP-PUMP DRIVE
133-9907 ADAPTER GP-PUMP DRIVE
S/N FFH1-UP; FTH1-UP
PART OF 6I-3638 DRIVE GP-PUMP
DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
S/N FFH1-UP; FTH1-UP
SAE 2
FLYWHEEL GP
FLYWHEEL GP
216-7883 FLYWHEEL GP
216-7883 FLYWHEEL GP
S/N FFH1-UP; FTH1-UP
GEAR GP
GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
S/N FFH1-UP; FTH1-UP
DUAL CAM SENSORS
PART OF 207-0449, 208-9490 GEAR GP-FRONT
GEAR GP-FRONT
207-0449 GEAR GP-FRONT
207-0449 GEAR GP-FRONT
S/N FFH1-UP
SHOT-PEENED CLUSTER IDLER AND AN 8 BOLT CAM GEAR RETAINER
GEAR GP-FRONT
208-9490 GEAR GP-FRONT
208-9490 GEAR GP-FRONT
S/N FFH1-UP; FTH1-UP
Type 1
GEAR GP-FRONT
208-9490 GEAR GP-FRONT
208-9490 GEAR GP-FRONT
S/N FFH1-UP; FTH1-UP
Type 2
HOUSING GP-FRONT
257-3276 HOUSING GP-FRONT
257-3276 HOUSING GP-FRONT
S/N FFH1-UP; FTH1-UP
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
S/N FFH1-UP
COVER GP-FLYWHEEL HOUSING
415-7490 COVER GP-FLYWHEEL HOUSING
415-7490 COVER GP-FLYWHEEL HOUSING
S/N C5H1-UP; FTH1-UP
ALSO AN ATTACHMENT
COVER GP-FLYWHEEL HOUSING
9N-3889 COVER GP-FLYWHEEL HOUSING
9N-3889 COVER GP-FLYWHEEL HOUSING
S/N FFH1-UP; FTH1-UP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
HOUSING GP-FLYWHEEL
135-7634 HOUSING GP-FLYWHEEL
135-7634 HOUSING GP-FLYWHEEL
S/N FFH1-UP
FOR USE WITH LH AND RH STARTING MOTORS, SAE NO. 1 HOUSING
HOUSING GP-FLYWHEEL
223-4738 HOUSING GP-FLYWHEEL
223-4738 HOUSING GP-FLYWHEEL
S/N FFH285-UP; FTH1-UP
NO.1 FLYWHEEL HOUSING WITH VERTICLE INSTALLATION ANGLE AND 10 DEGREE PADS
FOR USE WITH @@@@@220-1204@@@@@, WET/DRY HOUSING APPLICATION, IF NO BRAKESAVER
PLUG GP-FLYWHEEL HOUSING
220-1204 PLUG GP-FLYWHEEL HOUSING
220-1204 PLUG GP-FLYWHEEL HOUSING
S/N FFH285-UP; FTH1-UP
CANNOT BE USED WITH BRAKESAVER
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
159-6159 COVER GP-FRONT HOUSING
159-6159 COVER GP-FRONT HOUSING
S/N FFH1-UP; FTH1-UP
CAM AND IDLER GEAR ACCESS
FASTENER GP-FRONT HOUSING
4P-6846 FASTENER GP-FRONT HOUSING
4P-6846 FASTENER GP-FRONT HOUSING
S/N FFH1-UP; FTH1-UP
GEAR GP-FRONT
207-0449 GEAR GP-FRONT
207-0449 GEAR GP-FRONT
S/N FFH1-UP
SHOT-PEENED CLUSTER IDLER AND AN 8 BOLT CAM GEAR RETAINER
GEAR GP-FRONT
208-9490 GEAR GP-FRONT
208-9490 GEAR GP-FRONT
S/N FFH1-UP; FTH1-UP
Type 1
GEAR GP-FRONT
208-9490 GEAR GP-FRONT
208-9490 GEAR GP-FRONT
S/N FFH1-UP; FTH1-UP
Type 2
HOUSING GP-FRONT
257-3276 HOUSING GP-FRONT
257-3276 HOUSING GP-FRONT
S/N FFH1-UP; FTH1-UP
PLATE AS-FRONT HOUSING
353-9982 PLATE AS-FRONT HOUSING
353-9982 PLATE AS-FRONT HOUSING
S/N FFH1-UP; FTH1-UP
PART OF 257-3276 HOUSING GP-FRONT
LIFTING GP-ENGINE
COVER GP-ENGINE LIFTING EYE
144-7184 COVER GP-ENGINE LIFTING EYE
144-7184 COVER GP-ENGINE LIFTING EYE
S/N C5H1-UP
ATTACHES TO ENGINE LIFTING EYES WHEN OTHER METHODS OF LIFTING PACKAGE IS REQUIRED
AN ATTACHMENT
LIFTING GP-ENGINE
111-2088 LIFTING GP-ENGINE
111-2088 LIFTING GP-ENGINE
S/N FFH1-UP; FTH1-UP
REAR, LOW PROFILE LIFTING EYE
LIFTING GP-ENGINE
127-0564 LIFTING GP-ENGINE
127-0564 LIFTING GP-ENGINE
S/N FFH1-UP; FTH1-UP
FRONT
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
232-6576 MOUNTING GP-ALTERNATOR
232-6576 MOUNTING GP-ALTERNATOR
S/N C5H1-UP; FFH1-UP; FTH1-UP
PART OF 287-4963 ALTERNATOR GP-CHARGING
ALSO AN ATTACHMENT
MOUNTING GP-ALTERNATOR
310-9221 MOUNTING GP-ALTERNATOR
310-9221 MOUNTING GP-ALTERNATOR
S/N C5H1-UP
LH
PART OF 287-4963 ALTERNATOR GP-CHARGING
AN ATTACHMENT
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE & GENERATOR
237-7182 MOUNTING GP-ENGINE & GENERATOR
237-7182 MOUNTING GP-ENGINE & GENERATOR
S/N C5H1-UP
AN ATTACHMENT
MOUNTING GP-ENGINE & GENERATOR
263-9346 MOUNTING GP-ENGINE & GENERATOR
263-9346 MOUNTING GP-ENGINE & GENERATOR
S/N C5H1-UP
AN ATTACHMENT
SUPPORT GP-ENGINE
238-0025 SUPPORT GP-ENGINE
238-0025 SUPPORT GP-ENGINE
S/N FFH1-UP; FTH1-UP
PAN GP-OIL
PAN GP-OIL
257-3113 PAN GP-OIL
257-3113 PAN GP-OIL -ENGINE
S/N FFH1-UP; FTH1-UP
PISTON & ROD GP
PISTON & ROD GP
252-0652 PISTON & ROD GP
252-0652 PISTON & ROD GP
S/N FFH1-UP; FTH1-UP
16:1 COMPRESSION RATIO
Type 1
PISTON & ROD GP
252-0652 PISTON & ROD GP
252-0652 PISTON & ROD GP
S/N FFH1-UP; FTH1-UP
16:1 COMPRESSION RATIO
Type 2
SERPENTINE/V-BELTS
V-BELT SET
284-8095 V-BELT SET
284-8095 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
S/N FFH1-UP; FTH1-UP
1499 MM (59 IN) LONG
FOR USE WITH FAN DRIVE RATIO OF 0.8:1
9N-1324 V-BELT SET
9N-1324 V-BELT SET -FAN DRIVE-INCLUDES 3-BELTS, FAN DRIVE
S/N FFH1-UP; FTH1-UP
1448-MM (57-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
VALVE MECHANISM GP
BASE GP-VALVE COVER & INJ HARN
234-5005 BASE GP-VALVE COVER & INJ HARN
234-5005 BASE GP-VALVE COVER & INJ HARN
S/N FFH1-1216
BASE GP-VALVE COVER & INJ HARN
278-5662 BASE GP-VALVE COVER & INJ HARN
278-5662 BASE GP-VALVE COVER & INJ HARN
S/N FFH1-1373
BASE GP-VALVE COVER & INJ HARN
278-5662 BASE GP-VALVE COVER & INJ HARN
278-5662 BASE GP-VALVE COVER & INJ HARN
S/N FFH1373-UP; FTH1-UP
COVER GP-VALVE MECHANISM
150-3135 COVER GP-VALVE MECHANISM
150-3135 COVER GP-VALVE MECHANISM
S/N FFH221-UP; FTH1-UP
PART OF 187-1328 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
150-3141 COVER GP-VALVE MECHANISM
150-3141 COVER GP-VALVE MECHANISM
S/N FFH1-UP
PART OF 159-9339 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
159-9339 COVER GP-VALVE MECHANISM
159-9339 COVER GP-VALVE MECHANISM
S/N FFH1-UP
NO OIL FILL, REAR MOUNTED BREATHER
FOR USE WITH REAR FUMES DISPOSAL
COVER GP-VALVE MECHANISM
159-9343 COVER GP-VALVE MECHANISM
159-9343 COVER GP-VALVE MECHANISM
S/N FFH1-UP
PART OF 159-9339 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
187-1326 COVER GP-VALVE MECHANISM
187-1326 COVER GP-VALVE MECHANISM
S/N FFH221-UP
PART OF 187-1328 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
187-1328 COVER GP-VALVE MECHANISM
187-1328 COVER GP-VALVE MECHANISM
S/N FFH221-4535
REAR MOUNTED BREATHER, NO OIL FILL
COVER GP-VALVE MECHANISM
187-1328 COVER GP-VALVE MECHANISM
187-1328 COVER GP-VALVE MECHANISM
S/N FFH4536-UP; FTH1-UP
REAR MOUNTED BREATHER, NO OIL FILL
COVER GP-VALVE MECHANISM
225-1148 COVER GP-VALVE MECHANISM
225-1148 COVER GP-VALVE MECHANISM
S/N FFH1-UP
PART OF 239-4113 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
239-4111 COVER GP-VALVE MECHANISM
239-4111 COVER GP-VALVE MECHANISM
S/N FFH1-UP
PART OF 239-4113 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
239-4113 COVER GP-VALVE MECHANISM
239-4113 COVER GP-VALVE MECHANISM
S/N FFH1-UP
COVER GP-VALVE MECHANISM
341-6804 COVER GP-VALVE MECHANISM
341-6804 COVER GP-VALVE MECHANISM
S/N FFH1-UP; FTH1-UP
PART OF 187-1328 COVER GP-VALVE MECHANISM
FASTENER GP-VALVE MECHANISM
109-1657 FASTENER GP-VALVE MECHANISM
109-1657 FASTENER GP-VALVE MECHANISM
S/N FFH1-UP; FTH1-UP
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N FFH1-215
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N FFH216-5029
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N FFH5030-UP; FTH1-UP
Type 1
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N FFH5030-UP; FTH1-UP
Type 2
ROCKER ARM GP
210-2521 ROCKER ARM GP
210-2521 ROCKER ARM GP
S/N FFH1-UP
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
278-1929 ROCKER ARM GP
278-1929 ROCKER ARM GP
S/N FFH1-UP
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
320-2796 ROCKER ARM GP
320-2796 ROCKER ARM GP
S/N FFH1-UP; FTH1-UP
PART OF 328-4236 ROCKER ARM GP
ROCKER ARM GP
328-4236 ROCKER ARM GP
328-4236 ROCKER ARM GP -NON-BRAKE
S/N FFH1-UP; FTH1-UP
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
328-4238 ROCKER ARM GP
328-4238 ROCKER ARM GP
S/N FFH1-UP; FTH1-UP
PART OF 328-4236 ROCKER ARM GP
ROCKER ARM GP
437-3862 ROCKER ARM GP
437-3862 ROCKER ARM GP
S/N FFH133-UP; FTH1-UP
PART OF 437-3865 ROCKER ARM GP
ROCKER ARM GP
437-3864 ROCKER ARM GP
437-3864 ROCKER ARM GP
S/N FFH133-UP; FTH1-UP
PART OF 437-3865 ROCKER ARM GP
437-3865 ROCKER ARM GP
437-3865 ROCKER ARM GP
S/N FFH133-UP; FTH1-UP
NON BRAKE
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
Type 1
ROCKER ARM GP
437-3865 ROCKER ARM GP
437-3865 ROCKER ARM GP
S/N FFH133-UP; FTH1-UP
NON BRAKE
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
Type 2
ROCKER ARM GP
489-8222 ROCKER ARM GP
489-8222 ROCKER ARM GP
S/N FFH133-UP; FTH1-UP
PART OF 437-3865 ROCKER ARM GP
COVER GP-ENGINE
KIT-FRONT COVER GASKET
444-6485 KIT-FRONT COVER GASKET
444-6485 KIT-FRONT COVER GASKET
S/N C5H1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
PART OF 473-4532 KIT-ENGINE OVERHAUL
FIELD INSTALLATION
449-8559 KIT-FRONT COVER GASKET
449-8559 KIT-FRONT COVER GASKET
S/N C5H1-UP
KIT CONTAINS THE GASKETS, SEALS & BENDABLE LOCKS TO REINSTALLTHE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@286-4918@@@@@, @@@@@286-4919@@@@@, @@@@@286-4920@@@@@, @@@@@286-4921@@@@@
FIELD INSTALLATION
ENGINE OVERHAUL KIT
473-4532 KIT-ENGINE OVERHAUL
473-4532 KIT-ENGINE OVERHAUL -MAJOR REPAIR
S/N C5H1-UP
FIELD INSTALLATION

Information:

(For parts list, see above)

Specifications
Belt Tension Chart
C15 Petroleum Generator Set Engines
Belt Tightener
C15 Petroleum Generator Set Engines
Engine News
A New Improved Cam Gear Is Now Available for Certain Engines {1212}
2013/02/22
Improved Camshafts Are Now Used on Certain C15 and C18 Engines {1210}
2015/05/29
Specifications
Camshaft
C15 Petroleum Generator Set Engines
Camshaft
C15 Petroleum Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Excessive Bearing Wear - Inspect
C15 Petroleum Generator Set Engines
Disassembly and Assembly
Camshaft Gear - Remove and Install
C15 and C18 Generator Set Engines
Camshaft Bearings - Install
C15 and C18 Generator Set Engines
Camshaft Bearings - Remove
C15 and C18 Generator Set Engines
Camshaft - Remove
C15 and C18 Generator Set Engines
Camshaft - Install
C15 and C18 Generator Set Engines
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM TO REPLACE THE GENERATOR ADAPTER BOLTS ON CERTAIN C9, C15, 3406, AND 3456 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM TO REPLACE THE GENERATOR ADAPTER BOLTS ON CERTAIN C9, C15, 3406, AND 3456 GENERATOR SETS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Engine News
Inspection and/or Repair Procedure to Replace Crankshafts on Industrial Engines {1202}
2006/05/01
A New Type of Main Bearing is Available {1202, 1203}
2008/09/29
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
C15 Generator Sets
Specifications
Connecting Rod Bearing Journal
C15 Petroleum Generator Set Engines
Crankshaft Seals
C15 Petroleum Generator Set Engines
Crankshaft
C15 Petroleum Generator Set Engines
Main Bearing Journal
C15 Petroleum Generator Set Engines
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C15 Petroleum Generator Set Engines
Main Bearings - Inspect
C15 Petroleum Generator Set Engines
Disassembly and Assembly
Bearing Clearance - Check
C15 and C18 Generator Set Engines
Crankshaft Main Bearings - Install
C15 and C18 Generator Set Engines
Crankshaft Main Bearings - Remove
C15 and C18 Generator Set Engines
Crankshaft Front Seal - Remove
C15 and C18 Generator Set Engines
Crankshaft Rear Seal - Install
C15 and C18 Generator Set Engines
Crankshaft Front Seal - Install
C15 and C18 Generator Set Engines
Crankshaft - Remove
C15 and C18 Generator Set Engines
Crankshaft - Install
C15 and C18 Generator Set Engines
Crankshaft Rear Seal - Remove
C15 and C18 Generator Set Engines
Truck Engine News
The Primer Color Has Changed for All C15 and C18 Truck Engine Blocks {1201, 7559}
2012/12/21
Engine News
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on Certain Engines {1124, 1201, 7555}
2010/03/12
The Primer Color Has Changed for All C15 and C18 Commercial Engine Blocks {1201, 7559}
2012/12/21
Cylinder Head And Spacer Plate Gasket Failures On Certain Engines {1100, 1201}
2015/05/15
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Specifications
Cylinder Liner
C15 Petroleum Generator Set Engines
Cylinder Block
C15 Petroleum Generator Set Engines
Main Bearing Journal
C15 Petroleum Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
C15 Petroleum Generator Set Engines
Excessive Bearing Wear - Inspect
C15 Petroleum Generator Set Engines
Main Bearings - Inspect
C15 Petroleum Generator Set Engines
Cylinder Liner Projection - Inspect
C15 Petroleum Generator Set Engines
Disassembly and Assembly
Bearing Clearance - Check
C15 and C18 Generator Set Engines
Crankshaft Main Bearings - Install
C15 and C18 Generator Set Engines
Crankshaft Main Bearings - Remove
C15 and C18 Generator Set Engines
Cylinder Liner - Install
C15 and C18 Generator Set Engines
Cylinder Liner - Remove
C15 and C18 Generator Set Engines
Piston Cooling Jets - Remove and Install
C15 and C18 Generator Set Engines
Camshaft Bearings - Install
C15 and C18 Generator Set Engines
Camshaft Bearings - Remove
C15 and C18 Generator Set Engines
Service Magazine
The Primer Color Has Changed for All C15 and C18 Machine Engine Blocks {1201, 7559}
2012/12/21
Engine News
A New Outer Valve Spring is Now Used {1100, 1108}
2009/03/30
Cylinder Head And Spacer Plate Gasket Failures On Certain Engines {1100, 1201}
2015/05/15
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Specifications
Cylinder Head Valves
C15 Petroleum Generator Set Engines
Cylinder Head Valves
C15 Petroleum Generator Set Engines
Cylinder Head
C15 Petroleum Generator Set Engines
Tool Operating Manual
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
LOWER COST C-15 &amp; C15 ACERT REMAN CYLINDER HEAD OPTIONS
LOWER COST C-15 & C15 ACERT REMAN CYLINDER HEAD OPTIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C15 Petroleum Generator Set Engines
Troubleshooting
Valve Rotator or Spring Lock Is Free
C15 Generator Set Engines
Disassembly and Assembly
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C15 and C18 Generator Set Engines
Inlet and Exhaust Valve Guides - Remove and Install
C15 and C18 Generator Set Engines
Inlet and Exhaust Valve Springs - Remove and Install
C15 and C18 Generator Set Engines
Inlet and Exhaust Valves - Remove and Install
C15 and C18 Generator Set Engines
Rocker Arm and Shaft - Remove
C15 and C18 Generator Set Engines
Rocker Arm and Shaft - Install
C15 and C18 Generator Set Engines
Electronic Unit Injector Sleeve - Remove
C15 and C18 Generator Set Engines
Cylinder Head - Remove
C15 and C18 Generator Set Engines
Cylinder Head - Install
C15 and C18 Generator Set Engines
Electronic Unit Injector Sleeve - Install
C15 and C18 Generator Set Engines
Camshaft Bearings - Install
C15 and C18 Generator Set Engines
Camshaft Bearings - Remove
C15 and C18 Generator Set Engines
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
C15 Generator Sets
Specifications
Vibration Damper and Pulley
C15 Petroleum Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
C15 Petroleum Generator Set Engines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C15 and C18 Generator Set Engines
Engine News
Radiator Fan Alignment, Fan Clearance Check, and Fan Belt Tensioning on Certain C15 Engines, C18 Engines, 3406 Generator Sets, and 3456 Generator Sets {1356, 1359, 1360}
2011/08/09
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM TO REPLACE THE FAN DRIVE PULLEY ON CERTAIN C15 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM TO REPLACE THE FAN DRIVE PULLEY ON CERTAIN C15 GENERATOR SETS
Disassembly and Assembly
Fan Drive - Disassemble
C15 and C18 Generator Set Engines
Fan Drive - Assemble
C15 and C18 Generator Set Engines
Fan Drive - Remove
C15 and C18 Generator Set Engines
Fan Drive - Install
C15 and C18 Generator Set Engines
Pump Drive - Remove
C15 and C18 Generator Set Engines
Pump Drive - Install
C15 and C18 Generator Set Engines
Pump Drive - Disassemble
C15 and C18 Generator Set Engines
Pump Drive - Assemble
C15 and C18 Generator Set Engines
Engine News
Proper Storage Procedures Are Available For Commercial Engines {1000}
Proper Storage Procedures Are Available For Commercial Engines {1000}
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel Housing
C15 Petroleum Generator Set Engines
Flywheel Housing
C15 Petroleum Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C15 Petroleum Generator Set Engines
Disassembly and Assembly
Flywheel - Remove
C15 and C18 Generator Set Engines
Flywheel - Install
C15 and C18 Generator Set Engines
Engine News
A New Improved Cam Gear Is Now Available for Certain Engines {1212}
2013/02/22
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/21
Improved Camshaft Gears Are Now Used on Certain 3406C, C15, and C18 Engines {1212}
Improved Camshaft Gears Are Now Used on Certain 3406C, C15, and C18 Engines {1212}
Specifications
Gear Group (Front)
C15 Petroleum Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
C15 Petroleum Generator Set Engines
Disassembly and Assembly
Gear Group (Front) - Remove
C15 and C18 Generator Set Engines
Gear Group (Front) - Install
C15 and C18 Generator Set Engines
Specifications
Flywheel Housing
C15 Petroleum Generator Set Engines
Flywheel Housing
C15 Petroleum Generator Set Engines
Testing and Adjusting
Flywheel Housing - Inspect
C15 Petroleum Generator Set Engines
Disassembly and Assembly
Flywheel Housing - Remove and Install
C15 and C18 Generator Set Engines
Specifications
Housing (Front)
C15 Petroleum Generator Set Engines
Crankshaft Seals
C15 Petroleum Generator Set Engines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Front Cover - Remove
C15 and C18 Generator Set Engines
Front Cover - Install
C15 and C18 Generator Set Engines
Housing (Front) - Remove
C15 and C18 Generator Set Engines
Housing (Front) - Install
C15 and C18 Generator Set Engines
Tool Operating Manual
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
Operation and Maintenance Manual
Engine Mounts - Inspect
C15 Generator Sets
Engine News
An Improved Alternator Mounting Group Is Now Used On Certain C15 And C18 Engines {1405}
2015/07/10
Special Instruction
New Alternator Mounting Group Installation On Certain Electric Power Generation Engines{1405}
New Alternator Mounting Group Installation On Certain Electric Power Generation Engines{1405}
Operation and Maintenance Manual
Engine Mounts - Inspect
C15 Generator Sets
Disassembly and Assembly
Engine Support (Front) - Remove and Install
C15 and C18 Generator Set Engines
Specifications
Engine Oil Pan
C15 Petroleum Generator Set Engines
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C15 and C18 Generator Set Engines
Engine News
An Additional One Piece Steel Piston Is Available for Cylinder Packs Used in Certain C15 and C27 Engines {1225, 1239}
2012/11/30
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Connecting Rod Bearing Journal
C15 Petroleum Generator Set Engines
Connecting Rod
C15 Petroleum Generator Set Engines
Piston and Rings
C15 Petroleum Generator Set Engines
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C15 Petroleum Generator Set Engines
Connecting Rod Bearings - Inspect
C15 Petroleum Generator Set Engines
Cylinder Liner Projection - Inspect
C15 Petroleum Generator Set Engines
Piston Ring Groove - Inspect
C15 Petroleum Generator Set Engines
Disassembly and Assembly
Bearing Clearance - Check
C15 and C18 Generator Set Engines
Connecting Rod Bearings - Install
C15 and C18 Generator Set Engines
Pistons and Connecting Rods - Disassemble
C15 and C18 Generator Set Engines
Connecting Rod Bearings - Remove
C15 and C18 Generator Set Engines
Pistons and Connecting Rods - Install
C15 and C18 Generator Set Engines
Pistons and Connecting Rods - Remove
C15 and C18 Generator Set Engines
Piston Cooling Jets - Remove and Install
C15 and C18 Generator Set Engines
Pistons and Connecting Rods - Assemble
C15 and C18 Generator Set Engines
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
C15 Generator Sets
Specifications
Vibration Damper and Pulley
C15 Petroleum Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C15 and C18 Generator Set Engines
Engine News
Different Housings are Used on 3400 Remanufactured Engines {1304}
Different Housings are Used on 3400 Remanufactured Engines {1304}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
C15 Generator Sets
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM TO REPLACE THE FAN DRIVE PULLEY ON CERTAIN C15 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM TO REPLACE THE FAN DRIVE PULLEY ON CERTAIN C15 GENERATOR SETS
Specifications
Belt Tension Chart
C15 Petroleum Generator Set Engines
Engine News
Valve Bridges are Included with Cylinder Heads {1102, 1123}
2010/08/23
A New Harness is Now Used {1120, 1408}
2008/02/25
A New Rocker Arm Assembly is Available {1123}
2008/08/25
A New Rocker Arm Assembly Is Available {1123}
2011/09/12
A New Screw Is Available for the Rocker Arm Assemblies of Some Commercial Engines {1123}
2010/03/12
A New Rocker Arm Assembly Is Available for C15 Engines {1123}
2010/03/29
A New Valve Bridge Is Available for Certain Commercial Engines {1121}
2011/01/06
A New Valve Bridge Is Available for Certain Commercial Engines {1102, 1123}
2011/01/10
Valve Cover Isolation Seals Are Now Used on Certain Engines {1107, 7555}
2011/11/08
An Improved Valve Cover Seal Is Used on Certain Commercial Engines {1107, 7553, 7555}
2014/07/25
Updated Torque Requirements for Reman Rocker Arm Adjusting Screw Lock Nuts on Certain C15, C16, C18, C27, and C32 Engines {1123}
2015/04/03
Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
C15 Generator Sets
Engine Valve Lash - Check
C15 Generator Sets
Special Instruction
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Specifications
Electronic Unit Injector Rocker Arm
C15 Petroleum Generator Set Engines
Electronic Unit Injector Rocker Arm
C15 Petroleum Generator Set Engines
Valve Mechanism Cover
C15 Petroleum Generator Set Engines
Electronic Unit Injector Rocker Arm
C15 Petroleum Generator Set Engines
Valve Mechanism Cover
C15 Petroleum Generator Set Engines
Valve Mechanism
C15 Petroleum Generator Set Engines
Valve Mechanism Cover
C15 Petroleum Generator Set Engines
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
REMANUFACTURED UNIT INJECTOR ROCKER ARM ASSEMBLIES FOR CERTAIN C15 ENGINE APPLICATIONS
REMANUFACTURED UNIT INJECTOR ROCKER ARM ASSEMBLIES FOR CERTAIN C15 ENGINE APPLICATIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
C15 Petroleum Generator Set Engines
Engine Valve Lash - Inspect/Adjust
C15 Petroleum Generator Set Engines
Troubleshooting
Excessive Valve Lash
C15 Generator Set Engines
Disassembly and Assembly
Valve Mechanism Cover Base - Remove and Install
C15 and C18 Generator Set Engines
Rocker Arm and Shaft - Remove
C15 and C18 Generator Set Engines
Rocker Arm and Shaft - Install
C15 and C18 Generator Set Engines
Rocker Arm - Disassemble
C15 and C18 Generator Set Engines
Rocker Arm - Assemble
C15 and C18 Generator Set Engines
Valve Mechanism Cover - Remove and Install
C15 and C18 Generator Set Engines
Service Magazine
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Engine News
A New Improved Seal Is Now Used in the Reman Water Pumps of Certain Engines {1000, 1361, 7555}
2012/05/09

Truck sale:

Caterpillar C15, Construction
96,000 USD 
Caterpillar C15, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar C15, Construction
65,000 
Caterpillar C15, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar C15, Construction
28,700 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Caterpillar C15, Construction
29,650 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Caterpillar C15, Construction
38,300 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.