AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

309-6722 COVER GP-VALVE MECHANISM ALSO AN ATTACHMENT C2.2 INDUSTRIAL ENGINE


BASIC ENGINE
VALVE MECHANISM GP
CRANKSHAFT GP

INDUSTRIAL ENGINE C2.2 INDUSTRIAL ENGINE C4M
 C2.2 Industrial Engine C4M00001-UP SEBP4329 C2.2 C4M   (2005)

BASIC ENGINE

VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
238-9348 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
268-9180 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
309-6722 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
309-6722 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
311-1123 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
311-1123 COVER GP-VALVE MECHANISM
 

#SEBP43290100
 

309-6722: COVER GP-VALVE MECHANISM

309-6722 COVER GP-VALVE MECHANISM
ALSO AN ATTACHMENT
i03401923 SEBP4329
3096722 COVER GP-VALVE MECHANISM Parts scheme 3096722 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-5939 [1] FILTER ELEMENT-BREATHER  
2. 153-5962 M [3] BOLT (M6X1X60-MM)  
3. 153-7640 M [2] BOLT (M6X1X20-MM)  
4. 154-1347 M [4] NUT (M10X1.25-THD)  
5. 288-6539 C [1] CAP  
6. 165-2140 M [1] BOLT (M6X1X40-MM)  
7. 246-4361 [4] WASHER (10.5X14X1.5-MM THK)  
8. 217-5859 [1] VALVE-BREATHER (CRANKCASE)  
9. 217-5860 [4] BOLT  
10. 320-8401 [1] PLATE-RETAINING  
11. 217-5862 [6] BOLT  
12. 494-9569 [1] GASKET  
13. 309-6735 [1] TUBE-AIR  
14. 233-0695 [1] SEAL-VALVE COVER  
15. 476-5582 [1] COVER-HEAD  
16. 153-5960 M [1] NUT (M6X1-THD)  
17. 360-9545 [1] STUD  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP43290101
 

309-6722: COVER GP-VALVE MECHANISM

309-6722 COVER GP-VALVE MECHANISM
i02770217 SEBP4329
3096722 COVER GP-VALVE MECHANISM Parts scheme 3096722 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-5939 [1] FILTER ELEMENT-BREATHER  
2. 153-5962 M [3] BOLT (M6X1X60-MM)  
3. 153-7640 M [2] BOLT (M6X1X20-MM)  
4. 154-1347 M [4] NUT (M10X1.25-THD)  
5. 249-7263 M [2] BOLT (M6X1X16-MM)(M6X1X16-MM)  
6. 165-2140 M [2] BOLT (M6X1X40-MM)  
7. 190-3762 [4] WASHER  
8. 217-5859 [1] VALVE-BREATHER (CRANKCASE)  
9. 217-5860 [4] BOLT  
10. 320-8401 [1] PLATE-RETAINING  
11. 217-5862 [6] BOLT  
12. 217-5864 [1] GASKET  
13. 225-8533 [1] GASKET (TURBOCHARGER)  
14. 233-0695 [1] SEAL-VALVE COVER  
15. 233-7061 [1] COVER-VALVE  
16. 309-6735 [1] TUBE-AIR  
17. 309-6736 [1] COVER  
  M   METRIC PART
 

#SEBP43290102
 

311-1123: COVER GP-VALVE MECHANISM

311-1123 COVER GP-VALVE MECHANISM
PART OF 341-3024 CONVERSION AR-ENGINE
Type 1
i02843846 SEBP4329
3111123 COVER GP-VALVE MECHANISM Parts scheme 3111123 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-5939 [1] FILTER ELEMENT-BREATHER  
2. 153-5962 M [2] BOLT (M6X1X60-MM)  
3. 153-7640 M [2] BOLT (M6X1X20-MM)  
4. 154-1347 M [3] NUT (M10X1.25-THD)  
5. 249-7263 M [2] BOLT (M6X1X16-MM)  
6. 165-2140 M [2] BOLT (M6X1X40-MM)  
7. 190-3762 [3] WASHER  
8. 217-5859 [1] VALVE-BREATHER (CRANKCASE)  
9. 217-5860 [4] BOLT  
10. 217-5861 [1] PLATE-RETAINING  
11. 217-5862 [6] BOLT  
12. 217-5864 [1] GASKET  
13. 225-8533 [1] GASKET  
14. 235-5531 [1] SEAL-VALVE COVER  
15. 239-9987 [1] COVER-VALVE  
16. 309-6735 [1] TUBE-AIR  
17. 309-6736 [1] COVER  
  M   METRIC PART
 

#SEBP43290103
 

311-1123: COVER GP-VALVE MECHANISM

311-1123 COVER GP-VALVE MECHANISM
PART OF 341-3024 CONVERSION AR-ENGINE
Type 2
i03401088 SEBP4329
3111123 COVER GP-VALVE MECHANISM Parts scheme 3111123 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-5939 [1] FILTER ELEMENT-BREATHER (CRANKCASE)  
2. 153-5962 M [2] BOLT (M6X1X60-MM)  
3. 153-7640 M [2] BOLT (M6X1X20-MM)  
4. 539-0439 M [3] NUT (M10X1.25-THD)  
6. 165-2140 M [2] BOLT (M6X1X40-MM)  
7. 246-4361 [3] WASHER (10.5X14X1.5-MM THK)  
8. 217-5859 [1] VALVE-BREATHER (CRANKCASE)  
9. 217-5860 [4] BOLT  
10. 217-5861 [1] PLATE-RETAINING  
11. 217-5862 [6] BOLT  
12. 494-9569 [1] GASKET  
14. 447-3735 [1] GASKET-COVER  
15. 422-4226 [1] COVER-VALVE  
16. 309-6735 [1] TUBE-AIR  
18. 288-6539 [1] CAP  
  M   METRIC PART
 

#SEBP43290104
 

420-0328: COVER GP-VALVE MECHANISM

420-0328 COVER GP-VALVE MECHANISM
i05199589 SEBP4329
4200328 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-5939 [1] FILTER ELEMENT-BREATHER  
2. 153-5960 M [1] NUT (M6X1-THD)  
3. 153-5962 M [3] BOLT (M6X1X60-MM)  
4. 153-7640 M [2] BOLT (M6X1X20-MM)  
5. 154-1347 M [4] NUT (M10X1.25-THD)  
6. 165-2140 M [1] BOLT (M6X1X40-MM)  
7. 246-4361 [4] WASHER (10.5X14X1.5-MM THK)  
8. 217-5859 [1] VALVE-BREATHER (CRANKCASE)  
9. 217-5860 [4] BOLT  
10. 217-5862 [6] BOLT  
11. 233-0695 [1] SEAL-VALVE COVER  
12. 288-6539 [1] CAP  
13. 309-6735 [1] TUBE-AIR  
14. 320-8401 [1] PLATE-RETAINING  
15. 360-9545 [1] STUD  
16. 494-9569 [1] GASKET  
17. 420-0321 [1] COVER-CYLINDER HEAD  
  M   METRIC PART
 

#SEBP43290105
 

154-1201: CRANKSHAFT GP

154-1201 CRANKSHAFT GP
PART OF 291-9418 CRANKSHAFT GP
i01498296 SEBP4329
1541201 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-5518 [1] KEY  
2. 154-1202 [1] GEAR-CRANKSHAFT (33-TEETH)  
 

#SEBP43290106
 

217-1447: CRANKSHAFT GP

217-1447 CRANKSHAFT GP
i01649053 SEBP4329
2171447 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-0181 [1] CAP AS-BEARING  
1A. 153-5402 [2] DOWEL  
1B. 154-0385 [2] BOLT  
2. 154-0386 [1] CAP AS-BEARING  
2A. 153-5402 [2] DOWEL  
2B. 154-0385 [2] BOLT  
3. 154-0388 [1] CAP AS-BEARING  
3A. 153-5402 [2] DOWEL  
3B. 154-0385 [2] BOLT  
4. 154-0389 [1] CAP AS-BEARING  
4A. 153-5402 [2] DOWEL  
4B. 154-0385 [2] BOLT  
5. 154-1230 [1] WASHER-THRUST  
6. 154-1231 [2] WASHER-THRUST  
7. 156-6971 [3] BOLT  
8. 183-1336 [1] BOLT  
9. 308-1852 [1] CRANKSHAFT AS  
9A. 153-5518 [1] KEY  
9B. 308-1853 [1] GEAR-CRANKSHAFT (62-TEETH)  
10. 154-1203 B [1] KIT-CRANKSHAFT BEARING (MAIN)  
  161-7163 AB [1] KIT-CRANKSHAFT BEARING (0.25-MM US)  
  161-7164 AB [1] KIT-CRANKSHAFT BEARING (0.5-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP43290107
 

235-6967: CRANKSHAFT GP

235-6967 CRANKSHAFT GP
Type 1
i01909902 SEBP4329
2356967 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-1231 [2] WASHER-THRUST  
2. 156-6967 [1] BEARING AS  
2A. 153-5402 [2] DOWEL  
2B. 154-0385 [2] BOLT  
3. 156-6970 [1] BEARING AS  
3A. 153-5402 [2] DOWEL  
3B. 154-0385 [2] BOLT  
4. 156-6968 [1] BEARING AS  
4A. 153-5402 [2] DOWEL  
4B. 154-0385 [2] BOLT  
5. 156-6977 [1] KIT-CRANKSHAFT BEARING (MAIN)  
  161-2628 AB KIT-CRANKSHAFT BEARING (0.25-MM US)  
  161-2629 AB KIT-CRANKSHAFT BEARING (0.5-MM US)  
6. 235-6962 [1] CRANKSHAFT GP  
6A. 153-5518 [1] KEY  
6B. 153-5519 [1] PIN  
6C. 154-1202 [1] GEAR-CRANKSHAFT (33-TEETH)  
7. 154-0390 [2] BOLT  
8. 156-6971 [2] BOLT  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP43290108
 

235-6967: CRANKSHAFT GP

235-6967 CRANKSHAFT GP
Type 2
i07627558 SEBP4329
2356967 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-1231 [2] WASHER-THRUST  
2. 156-6967 [1] BEARING AS  
2A. 153-5402 [2] DOWEL  
2B. 154-0385 [2] BOLT  
3. 156-6970 [1] BEARING AS  
3A. 153-5402 [2] DOWEL  
3B. 154-0385 [2] BOLT  
4. 156-6968 [1] BEARING AS  
4A. 153-5402 [2] DOWEL  
4B. 154-0385 [2] BOLT  
5. 156-6977 [1] KIT-CRANKSHAFT BEARING (MAIN)  
  161-2628 AB KIT-CRANKSHAFT BEARING (0.25-MM US)  
  161-2629 AB KIT-CRANKSHAFT BEARING (0.5-MM US)  
6. 311-1157 C [1] CRANKSHAFT AS  
6A. 153-5518 [1] KEY  
6B. 153-5519 [1] PIN  
6C. 308-1853 [1] GEAR-CRANKSHAFT (33-TEETH)  
7. 183-1336 [2] BOLT  
8. 156-6971 [2] BOLT  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP43290109
 

236-5052: CRANKSHAFT GP

236-5052 CRANKSHAFT GP
i01932124 SEBP4329
2365052 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-0181 [1] CAP AS-BEARING  
1A. 153-5402 [2] DOWEL  
1B. 154-0385 [2] BOLT  
2. 154-0386 [1] CAP AS-BEARING  
2A. 153-5402 [2] DOWEL  
2B. 154-0385 [2] BOLT  
3. 154-0388 [1] CAP AS-BEARING  
3A. 153-5402 [2] DOWEL  
3B. 154-0385 [2] BOLT  
4. 154-0389 [1] CAP AS-BEARING  
4A. 153-5402 [2] DOWEL  
4B. 154-0385 [2] BOLT  
5. 308-1852 [1] CRANKSHAFT AS  
5A. 308-1853 [1] GEAR-CRANKSHAFT (62-TEETH)  
5B. 153-5518 [1] KEY  
6. 154-1230 [1] WASHER-THRUST  
7. 154-1231 [2] WASHER-THRUST  
8. 154-1203 B [1] KIT-CRANKSHAFT BEARING (MAIN)  
  161-7163 AB KIT-CRANKSHAFT BEARING (0.25-MM US)  
  161-7164 AB KIT-CRANKSHAFT BEARING (0.5-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

Information:

Engine News
Rocker Assembly Seals {1100, 1107, 1123}
2009/01/05
Pushrods {1102, 1121, 1123, 1209}
2009/01/26
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Special Instruction
Blow-by from Crankcase Breather for C2.2, C3.3, C4.4, C6.6, C7.1 (Mechanical), and C7.1 Engines {1000, 1074, 1107, 1317}
Blow-by from Crankcase Breather for C2.2, C3.3, C4.4, C6.6, C7.1 (Mechanical), and C7.1 Engines {1000, 1074, 1107, 1317}
Specifications
Rocker Shaft
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Valve Mechanism Cover
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Lifter Group
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Testing and Adjusting
Valve Depth - Inspect
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Valve Guide - Inspect
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Finding Top Center Position for No. 1 Piston
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Disassembly and Assembly
Valve Mechanism Cover - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Rocker Shaft and Pushrod - Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Rocker Shaft and Pushrod - Remove
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Rocker Shaft - Assemble
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Rocker Shaft - Disassemble
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Lifter Group - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog C2.2 :

COVER GP-VALVE MECHANISM
268-9180 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
238-9348 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
235-5533 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
233-0684 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
218-2377 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
217-5867 COVER GP-VALVE MECHANISM
COVER GP-TIMING ADVANCE
288-8834 COVER GP-TIMING ADVANCE
COVER GP-ENGINE
342-9605 COVER GP-ENGINE
COVER GP-VALVE MECHANISM
309-6722 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
311-1123 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
311-1123 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
420-0328 COVER GP-VALVE MECHANISM
CRANKSHAFT GP
154-1201 CRANKSHAFT GP
CRANKSHAFT GP
217-1447 CRANKSHAFT GP
CRANKSHAFT GP
235-6967 CRANKSHAFT GP
CRANKSHAFT GP
235-6967 CRANKSHAFT GP

Truck sale:

2017 CAT C2.2
USD $8,485 
2017 CAT C2.2

The Dutch Engine and Pump Company BV
Ridderkerk, The Netherlands
2017 CAT C2.2
USD $8,485 
2017 CAT C2.2

The Dutch Engine and Pump Company BV
Ridderkerk, The Netherlands
2017 CAT C2.2
USD $8,442 
2017 CAT C2.2

BIG MACHINERY BV
Velddriel, The Netherlands
2017 CAT C2.2
USD $8,442 
2017 CAT C2.2

BIG MACHINERY BV
Velddriel, The Netherlands
2017 CAT C2.2
USD $8,442 
2017 CAT C2.2

BIG MACHINERY BV
Velddriel, The Netherlands
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.