AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

343-3461 CONTROL GP-GOVERNOR Type 1 AN ATTACHMENT C2.2 INDUSTRIAL ENGINE


FUEL SYSTEM
CONTROL GP-GOVERNOR

INDUSTRIAL ENGINE C2.2 INDUSTRIAL ENGINE C4M
 C2.2 Industrial Engine C4M00001-UP SEBP4329 C2.2 C4M   (2005)

FUEL SYSTEM

CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
342-9625 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
342-9625 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
343-3461 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
343-3461 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
343-3461 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
343-3921 CONTROL GP-GOVERNOR
 

#SEBP43290390
 

343-3461: CONTROL GP-GOVERNOR

343-3461 CONTROL GP-GOVERNOR
Type 1
AN ATTACHMENT
i03635456 SEBP4329
3433461 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0846 M [1] BOLT (M6X1X14-MM)  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 139-5511 [1] CAP (TAMPER RESISTANT)  
4. 153-5592 M [1] NUT (M8X1.25-THD)  
5. 153-6415 [3] WASHER  
6. 153-7983 [1] PIN  
7. 154-1403 [1] SEAL-O-RING  
8. 369-4486 M [2] BOLT (M6X1X35-MM)  
9. 162-2207 M [1] NUT  
10. 217-7115 [1] CAP (TAMPER RESISTANT)  
11. 106-8916 M [4] BOLT (M6X16-MM)  
12. 423-7724 [1] GASKET  
13. 308-1882 [1] SPRING  
14. 308-1889 M [1] NUT (M10X1.25-THD)  
15. 308-1892 M [1] NUT (M6X1-THD)  
16. 308-1897 [2] RING  
17. 336-2965 [1] SPRING  
18. 308-4266 [1] SHAFT  
19. 390-3731 [1] SHAFT  
20. 309-6729 [1] SEAL-O-RING  
21. 364-2755 [1] BOLT  
22. 311-0655 [1] SPRING  
23. 313-5832 [1] BOLT AS  
23A. 153-7987 [1] WASHER  
23B. 191-9297 M [1] NUT (M10X1.25-THD)  
23C. 313-5833 [1] SPRING  
24. 317-7195 [1] SPRING  
25. 319-3253 [1] SENSOR-SPEED (TIMING)  
26. 321-4249 [1] NUT  
27. 390-3729 [1] LEVER-CONTROL  
28. 322-7493 [1] LEVER-CONTROL  
29. 330-9189 [1] PLUG  
30. 425-7065 [1] CAP-TAMPER PROOF  
31. 334-0732 [1] ARM (FRONT HOUSING)  
32. 335-5578 [1] BRACKET  
  M   METRIC PART
 

#SEBP43290391
 

343-3461: CONTROL GP-GOVERNOR

343-3461 CONTROL GP-GOVERNOR
Type 2
AN ATTACHMENT
i06916730 SEBP4329
3433461 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 335-5578 [1] BRACKET  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 139-5511 [1] CAP (TAMPER RESISTANT)  
4. 153-5592 M [1] NUT (M8X1.25-THD)  
5. 153-6415 C [2] WASHER  
6. 153-7983 [1] PIN  
7. 154-1403 [1] SEAL-O-RING  
8. 369-4486 M [2] BOLT (M6X1X35-MM)  
9. 162-2207 M [1] NUT  
10. 217-7115 [1] CAP (TAMPER RESISTANT)  
11. 106-8916 M [4] BOLT (M6X16-MM)  
12. 423-7724 [1] GASKET  
13. 308-1882 [1] SPRING  
14. 308-1889 M [1] NUT (M10X1.25-THD)  
15. 308-1892 M [1] NUT (M6X1-THD)  
16. 308-1897 [2] RING  
17. 336-2965 [1] SPRING  
18. 308-4266 [1] SHAFT  
19. 390-3731 [1] SHAFT  
20. 309-6729 [1] SEAL-O-RING  
21. 364-2755 [1] BOLT  
22. 311-0655 [1] SPRING  
23. 313-5832 [1] BOLT AS  
23A. 153-7987 [1] WASHER  
23B. 191-9297 M [1] NUT (M10X1.25-THD)  
23C. 313-5833 [1] SPRING  
24. 317-7195 [1] SPRING  
25. 319-3253 [1] SENSOR-SPEED (TIMING)  
26. 321-4249 [1] NUT  
27. 390-3729 [1] LEVER-CONTROL  
28. 322-7493 [1] LEVER-CONTROL  
29. 330-9189 [1] PLUG  
30. 425-7065 [1] CAP-TAMPER PROOF  
31. 334-0732 [1] ARM (FRONT HOUSING)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP43290392
 

343-3461: CONTROL GP-GOVERNOR

343-3461 CONTROL GP-GOVERNOR
Type 3
AN ATTACHMENT
i07157995 SEBP4329
3433461 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 335-5578 [1] BRACKET  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 139-5511 [1] CAP (TAMPER RESISTANT)  
4. 153-5592 M [1] NUT (M8X1.25-THD)  
5. 153-6415 [2] WASHER  
6. 153-7983 [1] PIN  
7. 095-1574 [1] SEAL-O-RING  
8. 369-4486 M [2] BOLT (M6X1X35-MM)  
9. 162-2207 M [1] NUT  
10. 217-7115 [1] CAP (TAMPER RESISTANT)  
11. 106-8916 M [4] BOLT (M6X16-MM)  
12. 423-7724 [1] GASKET  
13. 308-1882 [1] SPRING  
14. 308-1889 M [1] NUT (M10X1.25-THD)  
15. 308-1892 M [1] NUT (M6X1-THD)  
16. 308-1897 C [1] RING  
17. 336-2965 [1] SPRING  
18. 308-4266 [1] SHAFT  
19. 390-3731 [1] SHAFT  
20. 309-6729 [1] SEAL-O-RING  
21. 364-2755 [1] BOLT  
22. 311-0655 [1] SPRING  
23. 313-5832 [1] BOLT AS  
23A. 153-7987 [1] WASHER  
23B. 191-9297 M [1] NUT (M10X1.25-THD)  
23C. 313-5833 [1] SPRING  
24. 317-7195 [1] SPRING  
25. 319-3253 [1] SENSOR-SPEED (TIMING)  
26. 502-9478 C [1] NUT  
27. 390-3729 [1] LEVER-CONTROL  
28. 322-7493 [1] LEVER-CONTROL  
29. 330-9189 [1] PLUG  
30. 503-9707 C [1] CAP  
31. 334-0732 [1] ARM (FRONT HOUSING)  
32. 503-9731 C [1] SHROUD  
33. 502-5421 C [1] PIN  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP43290393
 

343-3921: CONTROL GP-GOVERNOR

343-3921 CONTROL GP-GOVERNOR
Type 1
i03769194 SEBP4329
3433921 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0846 M [1] BOLT (M6X1X14-MM)  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 139-5511 [1] CAP (TAMPER RESISTANT)  
4. 153-5592 M [1] NUT (M8X1.25-THD)  
5. 153-6415 [3] WASHER  
6. 153-7983 [1] PIN  
7. 095-1574 [1] SEAL-O-RING  
8. 369-4486 M [2] BOLT (M6X1X35-MM)  
9. 162-2207 M [1] NUT  
10. 217-7115 [1] CAP (TAMPER RESISTANT)  
11. 106-8916 M [4] BOLT (M6X16-MM)  
12. 423-7724 [1] GASKET  
13. 308-1882 [1] SPRING  
14. 308-1889 M [1] NUT (M10X1.25-THD)  
15. 308-1892 M [1] NUT (M6X1-THD)  
16. 308-1897 [2] RING  
17. 336-2965 [1] SPRING  
18. 308-4266 [1] SHAFT  
19. 390-3731 [1] SHAFT  
20. 309-6729 [1] SEAL-O-RING  
21. 364-2755 [1] BOLT  
22. 311-0655 [1] SPRING  
23. 313-5832 [1] BOLT AS  
23A. 153-7987 [1] WASHER  
23B. 191-9297 M [1] NUT (M10X1.25-THD)  
23C. 313-5833 [1] SPRING  
24. 317-7195 [1] SPRING  
25. 319-3253 [1] SENSOR-SPEED  
26. 321-4249 [1] NUT  
27. 390-3729 [1] LEVER-CONTROL  
28. 322-7493 [1] LEVER-CONTROL  
29. 330-9189 [1] PLUG  
30. 425-7065 [1] CAP-TAMPER PROOF  
31. 334-0732 [1] ARM (FRONT HOUSING)  
32. 335-5578 [1] BRACKET  
  M   METRIC PART
 

#SEBP43290394
 

343-3921: CONTROL GP-GOVERNOR

343-3921 CONTROL GP-GOVERNOR
Type 2
i06916736 SEBP4329
3433921 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 335-5578 [1] BRACKET  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 139-5511 [1] CAP (TAMPER RESISTANT)  
4. 153-5592 M [1] NUT (M8X1.25-THD)  
5. 153-6415 C [2] WASHER  
6. 153-7983 [1] PIN  
7. 095-1574 [1] SEAL-O-RING  
8. 369-4486 M [2] BOLT (M6X1X35-MM)  
9. 162-2207 M [1] NUT  
10. 217-7115 [1] CAP (TAMPER RESISTANT)  
11. 106-8916 M [4] BOLT (M6X16-MM)  
12. 423-7724 [1] GASKET  
13. 308-1882 [1] SPRING  
14. 308-1889 M [1] NUT (M10X1.25-THD)  
15. 308-1892 M [1] NUT (M6X1-THD)  
16. 308-1897 [2] RING  
17. 336-2965 [1] SPRING  
18. 308-4266 [1] SHAFT  
19. 390-3731 [1] SHAFT  
20. 309-6729 [1] SEAL-O-RING  
21. 364-2755 [1] BOLT  
22. 311-0655 [1] SPRING  
23. 313-5832 [1] BOLT AS  
23A. 153-7987 [1] WASHER  
23B. 191-9297 M [1] NUT (M10X1.25-THD)  
23C. 313-5833 [1] SPRING  
24. 317-7195 [1] SPRING  
25. 319-3253 [1] SENSOR-SPEED  
26. 321-4249 [1] NUT  
27. 390-3729 [1] LEVER-CONTROL  
28. 322-7493 [1] LEVER-CONTROL  
29. 330-9189 [1] PLUG  
30. 425-7065 [1] CAP-TAMPER PROOF  
31. 334-0732 [1] ARM (FRONT HOUSING)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP43290395
 

343-3921: CONTROL GP-GOVERNOR

343-3921 CONTROL GP-GOVERNOR
Type 3
i07152579 SEBP4329
3433921 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 335-5578 [1] BRACKET  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 139-5511 [1] CAP (TAMPER RESISTANT)  
4. 153-5592 M [1] NUT (M8X1.25-THD)  
5. 153-6415 C [2] WASHER  
6. 153-7983 [1] PIN  
7. 095-1574 [1] SEAL-O-RING  
8. 369-4486 M [2] BOLT (M6X1X35-MM)  
9. 162-2207 M [1] NUT  
10. 217-7115 [1] CAP (TAMPER RESISTANT)  
11. 106-8916 M [4] BOLT (M6X16-MM)  
12. 423-7724 [1] GASKET  
13. 308-1882 [1] SPRING  
14. 308-1889 M [1] NUT (M10X1.25-THD)  
15. 308-1892 M [1] NUT (M6X1-THD)  
16. 308-1897 C [1] RING  
17. 308-4266 [1] SHAFT  
18. 390-3731 [1] SHAFT  
19. 309-6729 [1] SEAL-O-RING  
20. 364-2755 [1] BOLT  
21. 311-0655 [1] SPRING  
22. 313-5832 [1] BOLT AS  
22A. 153-7987 [1] WASHER  
22B. 191-9297 M [1] NUT (M10X1.25-THD)  
22C. 313-5833 [1] SPRING  
23. 317-7195 [1] SPRING  
24. 319-3253 [1] SENSOR-SPEED  
25. 502-9478 C [1] NUT  
26. 390-3729 [1] LEVER-CONTROL  
27. 322-7493 [1] LEVER-CONTROL  
28. 330-9189 [1] PLUG  
29. 334-0732 [1] ARM (FRONT HOUSING)  
30. 502-5421 C [1] PIN  
31. 503-9707 C [1] CAP  
32. 503-9731 C [1] SHROUD  
33. 336-2965 [1] SPRING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP43290396
 

343-4303: CONTROL GP-GOVERNOR

343-4303 CONTROL GP-GOVERNOR
Type 1
AN ATTACHMENT
i03774665 SEBP4329
3434303 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0846 M [1] BOLT (M6X1X14-MM)  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 139-5511 [1] CAP (TAMPER RESISTANT)  
4. 153-5592 M [1] NUT (M8X1.25-THD)  
5. 153-6415 [3] WASHER  
6. 153-7983 [1] PIN  
7. 153-7987 [1] WASHER  
8. 095-1574 [1] SEAL-O-RING  
9. 369-4486 M [2] BOLT (M6X1X35-MM)  
10. 162-2207 M [1] NUT  
11. 106-8916 M [4] BOLT (M6X16-MM)  
12. 423-7724 [1] GASKET  
13. 308-1882 [1] SPRING  
14. 308-1889 M [1] NUT (M10X1.25-THD)  
15. 308-1892 M [1] NUT (M6X1-THD)  
16. 308-1897 [1] RING  
17. 336-2965 [1] SPRING  
18. 308-4266 [1] SHAFT  
19. 390-3731 [1] SHAFT  
20. 309-6729 [1] SEAL-O-RING  
21. 364-2755 [1] BOLT  
22. 311-0655 [1] SPRING  
23. 313-2037 [1] PLUG  
24. 317-7195 [1] SPRING  
25. 319-3253 [1] SENSOR-SPEED  
26. 321-4249 [1] NUT  
27. 390-3729 [1] LEVER-CONTROL  
28. 322-7493 [1] LEVER-CONTROL  
29. 330-9189 [1] PLUG  
30. 425-7065 [1] CAP-TAMPER PROOF  
31. 334-0732 [1] ARM (FRONT HOUSING)  
32. 335-5578 [1] BRACKET  
  M   METRIC PART
 

#SEBP43290397
 

343-4303: CONTROL GP-GOVERNOR

343-4303 CONTROL GP-GOVERNOR
Type 2
AN ATTACHMENT
i06916735 SEBP4329
3434303 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 335-5578 [1] BRACKET  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 139-5511 [1] CAP (TAMPER RESISTANT)  
4. 153-5592 M [1] NUT (M8X1.25-THD)  
5. 153-6415 C [2] WASHER  
6. 153-7983 [1] PIN  
7. 153-7987 [1] WASHER  
8. 095-1574 [1] SEAL-O-RING  
9. 369-4486 M [2] BOLT (M6X1X35-MM)  
10. 162-2207 M [1] NUT  
11. 106-8916 M [4] BOLT (M6X16-MM)  
12. 423-7724 [1] GASKET  
13. 308-1882 [1] SPRING  
14. 308-1889 M [1] NUT (M10X1.25-THD)  
15. 308-1892 M [1] NUT (M6X1-THD)  
16. 336-2965 [1] SPRING  
17. 308-4266 [1] SHAFT  
18. 390-3731 [1] SHAFT  
19. 309-6729 [1] SEAL-O-RING  
20. 364-2755 [1] BOLT  
21. 311-0655 [1] SPRING  
22. 313-2037 [1] PLUG  
23. 317-7195 [1] SPRING  
24. 319-3253 [1] SENSOR-SPEED  
25. 502-9478 [1] NUT  
26. 390-3729 [1] LEVER-CONTROL  
27. 322-7493 [1] LEVER-CONTROL  
28. 330-9189 [1] PLUG  
29. 503-9731 [1] SHROUD  
30. 334-0732 [1] ARM (FRONT HOUSING)  
31. 502-5421 [1] PIN  
32. 503-9707 [1] CAP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP43290398
 

380-0410: CONTROL GP-GOVERNOR

380-0410 CONTROL GP-GOVERNOR
Type 1
i05090017 SEBP4329
3800410 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 317-7195 [1] SPRING  
2. 319-3250 [1] SENSOR-SPEED  
3. 321-4249 [1] NUT  
4. 390-3729 [1] LEVER-CONTROL  
5. 322-7493 [1] LEVER-CONTROL  
6. 330-9189 [1] PLUG  
7. 425-7065 [1] CAP-TAMPER PROOF  
8. 334-0732 [1] ARM (FRONT HOUSING)  
9. 335-5578 [1] BRACKET  
10. 336-2965 [1] SPRING  
11. 369-4486 M [2] BOLT (M6X1X35-MM)  
12. 106-8916 M [4] BOLT (M6X16-MM)  
13. 5C-2890 M [1] NUT (M6X1-THD)  
14. 139-5511 [1] CAP (TAMPER RESISTANT)  
15. 153-5592 M [1] NUT (M8X1.25-THD)  
16. 153-6415 [2] WASHER  
17. 153-7983 [1] PIN  
18. 095-1574 [1] SEAL-O-RING  
19. 162-2207 M [1] NUT  
20. 217-7115 [1] CAP (TAMPER RESISTANT)  
21. 423-7724 [1] GASKET  
22. 308-1882 [1] SPRING  
23. 308-1889 M [1] NUT (M10X1.25-THD)  
24. 308-1892 M [1] NUT (M6X1-THD)  
25. 308-1897 [2] RING  
27. 308-4266 [1] SHAFT  
28. 390-3731 [1] SHAFT  
29. 309-6729 [1] SEAL-O-RING  
30. 495-0737 [1] BOLT  
31. 311-0655 [1] SPRING  
32. 313-5832 [1] BOLT AS  
32A. 153-7987 [1] WASHER  
32B. 191-9297 M [1] NUT (M10X1.25-THD)  
  M   METRIC PART
 

#SEBP43290399
 

380-0410: CONTROL GP-GOVERNOR

380-0410 CONTROL GP-GOVERNOR
Type 2
i07152601 SEBP4329
3800410 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your C2.2 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 317-7195 [1] SPRING  
2. 319-3250 [1] SENSOR-SPEED (TIMING)  
3. 502-9478 C [1] NUT  
4. 390-3729 [1] LEVER-CONTROL  
5. 322-7493 [1] LEVER-CONTROL  
6. 330-9189 [1] PLUG  
7. 503-9707 C [1] CAP  
8. 334-0732 [1] ARM (FRONT HOUSING)  
9. 335-5578 [1] BRACKET  
10. 336-2965 [1] SPRING  
11. 369-4486 M [2] BOLT (M6X1X35-MM)  
12. 106-8916 M [4] BOLT (M6X16-MM)  
13. 5C-2890 M [1] NUT (M6X1-THD)  
14. 139-5511 [1] CAP (TAMPER RESISTANT)  
15. 153-5592 M [1] NUT (M8X1.25-THD)  
16. 153-6415 [2] WASHER  
17. 153-7983 [1] PIN  
18. 095-1574 [1] SEAL-O-RING  
19. 162-2207 M [1] NUT  
20. 217-7115 [1] CAP (TAMPER RESISTANT)  
21. 423-7724 [1] GASKET  
22. 308-1882 [1] SPRING  
23. 308-1889 M [1] NUT (M10X1.25-THD)  
24. 308-1892 M [1] NUT (M6X1-THD)  
25. 308-1897 C [1] RING  
27. 308-4266 [1] SHAFT  
28. 390-3731 [1] SHAFT  
29. 309-6729 [1] SEAL-O-RING  
30. 495-0737 [1] BOLT  
31. 311-0655 [1] SPRING  
32. 313-5832 [1] BOLT AS  
32A. 153-7987 [1] WASHER  
32B. 191-9297 M [1] NUT (M10X1.25-THD)  
32C. 313-5833 [1] SPRING  
33. 503-9731 C [1] SHROUD  
34. 502-5421 C [1] PIN  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog C2.2 :

CONTROL GP-GOVERNOR
342-9625 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
342-9625 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
342-9601 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
342-9601 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
342-8529 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
342-8529 CONTROL GP-GOVERNOR
TURBOCHARGER GP
308-2308 TURBOCHARGER GP
TURBOCHARGER GP
308-2308 TURBOCHARGER GP
CONTROL GP-GOVERNOR
343-3461 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
343-3461 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
343-3921 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
343-3921 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
343-3921 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
343-4303 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
343-4303 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
380-0410 CONTROL GP-GOVERNOR

Truck sale:

2017 CAT C2.2
USD $8,485 
2017 CAT C2.2

The Dutch Engine and Pump Company BV
Ridderkerk, The Netherlands
2017 CAT C2.2
USD $8,485 
2017 CAT C2.2

The Dutch Engine and Pump Company BV
Ridderkerk, The Netherlands
2017 CAT C2.2
USD $8,442 
2017 CAT C2.2

BIG MACHINERY BV
Velddriel, The Netherlands
2017 CAT C2.2
USD $8,442 
2017 CAT C2.2

BIG MACHINERY BV
Velddriel, The Netherlands
2017 CAT C2.2
USD $8,442 
2017 CAT C2.2

BIG MACHINERY BV
Velddriel, The Netherlands
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.