FUEL SYSTEM
FILTER GP-FUELPUMP GP-FUEL INJECTION
FUEL SYSTEM
FILTER GP-FUEL
#SEBP43290440
268-8806: PUMP GP-FILTER & FUEL TRANSFER
268-8806 PUMP GP-FILTER & FUEL TRANSFER
For full view, you need register
Parts for your C2.2 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-5592 M | [1] | NUT (M8X1.25-THD) | |
| 2. | 153-6838 M | [2] | BOLT (M6X1X12-MM) | |
| 3. | 215-2606 | [1] | GASKET | |
| 4. | 155-7984 | [1] | WASHER (8.4X16X1.6-MM THK) | |
| 5. | 165-2141 M | [1] | BOLT (M8X1.25X20-MM) | |
| 6. | 183-4036 | [1] | CONNECTOR | |
| 7. | 183-4320 | [1] | PUMP AS-FUEL TRANSFER | |
| 8. | 476-2680 | [1] | BRACKET | |
| 9. | 243-6411 | [1] | FILTER AS-FUEL | |
| 10. | 183-4323 | [1] | COVER | |
| M | METRIC PART | |||
#SEBP43290441
217-2764: PUMP GP-FUEL INJECTION
217-2764 PUMP GP-FUEL INJECTION
Type 1
Type 1
For full view, you need register
Parts for your C2.2 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-5592 M | [3] | NUT (M8X1.25-THD) | |
| 2. | 153-5960 M | [3] | NUT (M6X1-THD) | |
| 3. | 290-8014 | [6] | CLAMP | |
| 4. | 153-6412 | [1] | WASHER | |
| 5. | 154-2713 M | [3] | BOLT (M8X1.25X20-MM) | |
| 6. | 154-2715 | [2] | WASHER | |
| 7. | 154-2716 | [4] | SEAL | |
| 8. | 154-3017 B | [1] | SHIM (0.2-MM THK) | |
| 160-3555 B | [1] | SHIM (0.3-MM THK) | ||
| 160-3556 B | [1] | SHIM (0.4-MM THK) | ||
| 160-3557 B | [1] | SHIM (0.5-MM THK) | ||
| 160-3558 B | [1] | SHIM (0.5-MM THK) | ||
| 9. | 154-3018 | [4] | INJECTOR AS-FUEL | |
| 9A. | 205-4731 | [1] | NUT | |
| 9B. | 202-1196 | [1] | WASHER-SPECIAL | |
| 10. | 183-3353 M | [3] | BOLT (M6X1X25-MM) | |
| 11. | 190-3803 | [1] | BOLT | |
| 12. | 295-8183 Y | [1] | PUMP GP-FUEL INJECTION | |
| 13. | 217-2760 | [1] | TUBE AS (CYL NO. 1) | |
| 14. | 217-2761 | [1] | TUBE AS (CYL NO. 2) | |
| 15. | 217-2762 | [1] | TUBE AS (CYL NO. 3) | |
| 16. | 217-2763 | [1] | TUBE AS (CYL NO. 4) | |
| 17. | 217-5204 | [1] | SOLENOID (FUEL SHUTOFF) | |
| 18. | 311-7561 | [1] | TUBE | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43290442
217-2764: PUMP GP-FUEL INJECTION
217-2764 PUMP GP-FUEL INJECTION
Type 2
Type 2
For full view, you need register
Parts for your C2.2 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-5592 M | [3] | NUT (M8X1.25-THD) | |
| 2. | 153-5960 M | [3] | NUT (M6X1-THD) | |
| 3. | 290-8014 | [6] | CLAMP | |
| 5. | 154-2713 M | [2] | BOLT (M8X1.25X20-MM) | |
| 6. | 154-2715 | [2] | WASHER | |
| 7. | 426-4357 | [4] | GASKET | |
| 8. | 351-2622 B | [1] | SHIM (0.20-MM THK, BEADED) | |
| 351-2621 B | [1] | SHIM (0.30-MM THK, BEADED) | ||
| 351-2620 B | [1] | SHIM (0.40-MM THK, BEADED) | ||
| 351-2619 B | [1] | SHIM (0.50-MM THK, BEADED) | ||
| 351-2618 B | [1] | SHIM (0.50-MM THK) | ||
| 9. | 252-1446 | [4] | INJECTOR AS-FUEL | |
| (EACH INCLUDES) | ||||
| 9A. | 205-4731 | [1] | NUT | |
| 9B. | 202-1196 | [1] | WASHER-SPECIAL | |
| 10. | 183-3353 M | [3] | BOLT (M6X1X25-MM) | |
| 11. | 190-3803 | [1] | BOLT | |
| 12. | 295-8183 Y | [1] | PUMP GP-FUEL INJECTION | |
| 13. | 217-2760 | [1] | TUBE AS (CYL NO. 1) | |
| 14. | 217-2761 | [1] | TUBE AS (CYL NO. 2) | |
| 15. | 217-2762 | [1] | TUBE AS (CYL NO. 3) | |
| 16. | 217-2763 | [1] | TUBE AS (CYL NO. 4) | |
| 17. | 419-7640 C | [1] | SOLENOID AS (12-VOLT)(FUEL SHUTOFF) | |
| 18. | 311-7561 | [1] | TUBE | |
| 19. | 102-2079 M | [1] | BOLT (M8X1.25X20-MM) | |
| 20. | 163-5372 | [1] | WASHER (8X15.4X4-MM THK) | |
| 21. | 154-0393 | [3] | STUD | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43290443
233-0545: PUMP GP-FUEL INJECTION
233-0545 PUMP GP-FUEL INJECTION
Type 1
Type 1
For full view, you need register
Parts for your C2.2 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-2079 M | [1] | BOLT (M8X1.25X20-MM) | |
| 2. | 153-5592 M | [3] | NUT (M8X1.25-THD) | |
| 3. | 153-5960 M | [3] | NUT (M6X1-THD) | |
| 4. | 154-0393 | [1] | STUD | |
| 5. | 154-2713 M | [2] | BOLT (M8X1.25X20-MM) | |
| 6. | 154-2715 | [2] | WASHER | |
| 7. | 154-2722 | [1] | LINE AS-FUEL INJECTION (CYL NO. 1) | |
| 8. | 154-2723 | [1] | LINE AS-FUEL INJECTION (CYL NO. 2) | |
| 9. | 154-2724 | [1] | LINE AS-FUEL INJECTION (CYL NO. 3) | |
| 10. | 154-2725 | [1] | LINE AS-FUEL INJECTION (CYL NO. 4) | |
| 11. | 163-5372 | [1] | WASHER (8X15.4X4-MM THK) | |
| 12. | 183-3353 M | [3] | BOLT (M6X1X25-MM) | |
| 13. | 190-3803 | [1] | BOLT | |
| 14. | 252-1466 | [4] | INJECTOR AS-FUEL | |
| (EACH INCLUDES) | ||||
| 14A. | 202-1196 | [1] | WASHER-SPECIAL | |
| 15. | 290-8014 | [6] | CLAMP | |
| 16. | 306-6346 Y | [1] | PUMP GP-FUEL INJECTION | |
| 17. | 311-7561 | [1] | TUBE | |
| 18. | 351-2618 B | [1] | SHIM (0.50-MM THK) | |
| 351-2619 B | [1] | SHIM (0.50-MM THK, BEADED) | ||
| 351-2620 B | [1] | SHIM (0.40-MM THK, BEADED) | ||
| 351-2621 B | [1] | SHIM (0.30-MM THK, BEADED) | ||
| 351-2622 B | [1] | SHIM (0.20-MM THK, BEADED) | ||
| 19. | 425-7981 | [1] | SOLENOID (FUEL SHUTOFF) | |
| 20. | 426-4357 | [4] | GASKET | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43290444
233-0545: PUMP GP-FUEL INJECTION
233-0545 PUMP GP-FUEL INJECTION
Type 2
Type 2
For full view, you need register
Parts for your C2.2 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-2079 M | [1] | BOLT (M8X1.25X20-MM) | |
| 2. | 153-5592 M | [3] | NUT (M8X1.25-THD) | |
| 3. | 153-5960 M | [3] | NUT (M6X1-THD) | |
| 4. | 154-0393 | [1] | STUD | |
| 5. | 154-2713 M | [2] | BOLT (M8X1.25X20-MM) | |
| 6. | 154-2715 | [2] | WASHER | |
| 7. | 154-2722 | [1] | LINE AS-FUEL INJECTION (CYL NO. 1) | |
| 8. | 154-2723 | [1] | LINE AS-FUEL INJECTION (CYL NO. 2) | |
| 9. | 154-2724 | [1] | LINE AS-FUEL INJECTION (CYL NO. 3) | |
| 10. | 154-2725 | [1] | LINE AS-FUEL INJECTION (CYL NO. 4) | |
| 11. | 163-5372 | [1] | WASHER (8X15.4X4-MM THK) | |
| 12. | 183-3353 M | [3] | BOLT (M6X1X25-MM) | |
| 13. | 190-3803 | [1] | BOLT | |
| 14. | 252-1466 | [4] | INJECTOR AS-FUEL | |
| (EACH INCLUDES) | ||||
| 14A. | 202-1196 | [1] | WASHER-SPECIAL | |
| 15. | 290-8014 | [6] | CLAMP | |
| 16. | 306-6346 Y | [1] | PUMP GP-FUEL INJECTION | |
| 17. | 311-7561 | [1] | TUBE | |
| 18. | 351-2618 B | [1] | SHIM (0.50-MM THK) | |
| 351-2619 B | [1] | SHIM (0.50-MM THK, BEADED) | ||
| 351-2620 B | [1] | SHIM (0.40-MM THK, BEADED) | ||
| 351-2621 B | [1] | SHIM (0.30-MM THK, BEADED) | ||
| 351-2622 B | [1] | SHIM (0.20-MM THK, BEADED) | ||
| 19. | 419-7640 C | [1] | SOLENOID AS (12-VOLT)(FUEL SHUTOFF) | |
| 20. | 426-4357 | [4] | GASKET | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43290445
238-6915: PUMP GP-FUEL INJECTION
238-6915 PUMP GP-FUEL INJECTION
S/N C4M1-1644; G7M1-4428
S/N C4M1-1644; G7M1-4428
For full view, you need register
Parts for your C2.2 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-5592 M | [3] | NUT (M8X1.25-THD) | |
| 2. | 153-5960 M | [3] | NUT (M6X1-THD) | |
| 3. | 238-1210 | [1] | SOLENOID (FUEL SHUTOFF) | |
| 4. | 153-6412 | [1] | WASHER | |
| 5. | 297-3090 Y | [1] | PUMP GP-FUEL INJECTION | |
| 6. | 154-2716 | [4] | SEAL | |
| 8. | 154-3017 B | [1] | SHIM (0.2-MM THK) | |
| 160-3555 B | [1] | SHIM (0.3-MM THK) | ||
| 160-3556 B | [1] | SHIM (0.4-MM THK) | ||
| 160-3557 B | [1] | SHIM (0.5-MM THK) | ||
| 160-3558 B | [1] | SHIM (0.5-MM THK) | ||
| 9. | 154-2722 | [1] | LINE AS-FUEL INJECTION (CYL NO. 1) | |
| 10. | 154-2723 | [1] | LINE AS-FUEL INJECTION (CYL NO. 2) | |
| 11. | 154-2724 | [1] | LINE AS-FUEL INJECTION (CYL NO. 3) | |
| 12. | 154-2725 | [1] | LINE AS-FUEL INJECTION (CYL NO. 4) | |
| 13. | 290-8014 | [6] | CLAMP | |
| 14. | 154-2713 M | [2] | BOLT (M8X1.25X20-MM) | |
| 15. | 190-3803 | [1] | BOLT | |
| 16. | 154-2715 | [2] | WASHER | |
| 17. | 183-3353 M | [3] | BOLT (M6X1X25-MM) | |
| 18. | 233-0584 | [4] | INJECTOR AS-FUEL | |
| 19. | 163-5372 | [1] | WASHER (8X15.4X4-MM THK) | |
| 20. | 311-7561 C | [1] | TUBE | |
| 21. | 238-6914 | [1] | BOLT (M8X1.25X20-MM) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43290446
238-6915: PUMP GP-FUEL INJECTION
238-6915 PUMP GP-FUEL INJECTION
S/N C4M1645-UP; G7M4429-UP
S/N C4M1645-UP; G7M4429-UP
For full view, you need register
Parts for your C2.2 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-5592 M | [3] | NUT (M8X1.25-THD) | |
| 2. | 153-5960 M | [3] | NUT (M6X1-THD) | |
| 3. | 419-7640 C | [1] | SOLENOID AS (12-VOLT)(FUEL SHUTOFF) | |
| 5. | 306-6346 CY | [2] | PUMP GP-FUEL INJECTION | |
| 6. | 426-4357 | [4] | GASKET | |
| 7. | 154-0393 | [3] | STUD | |
| 8. | 351-2622 B | [1] | SHIM (0.20-MM THK, BEADED) | |
| 351-2621 B | [1] | SHIM (0.30-MM THK, BEADED) | ||
| 351-2620 B | [1] | SHIM (0.40-MM THK, BEADED) | ||
| 351-2619 B | [1] | SHIM (0.50-MM THK, BEADED) | ||
| 351-2618 B | [1] | SHIM (0.50-MM THK) | ||
| 9. | 154-2722 | [1] | LINE AS-FUEL INJECTION (CYL NO. 1) | |
| 10. | 154-2723 | [1] | LINE AS-FUEL INJECTION (CYL NO. 2) | |
| 11. | 154-2724 | [1] | LINE AS-FUEL INJECTION (CYL NO. 3) | |
| 12. | 154-2725 | [1] | LINE AS-FUEL INJECTION (CYL NO. 4) | |
| 13. | 290-8014 | [6] | CLAMP | |
| 14. | 154-2713 M | [1] | BOLT (M8X1.25X20-MM) | |
| 15. | 190-3803 | [1] | BOLT | |
| 16. | 154-2715 | [1] | WASHER | |
| 17. | 183-3353 M | [3] | BOLT (M6X1X25-MM) | |
| 18. | 252-1466 | [4] | INJECTOR AS-FUEL | |
| (EACH INCLUDES) | ||||
| 18A. | 202-1196 | [1] | WASHER-SPECIAL | |
| 18B. | 205-4731 | [1] | NUT | |
| 19. | 163-5372 | [1] | WASHER (8X15.4X4-MM THK) | |
| 20. | 311-7561 | [1] | TUBE | |
| 21. | 102-2079 M | [1] | BOLT (M8X1.25X20-MM) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43290447
262-5318: PUMP GP-FUEL INJECTION
262-5318 PUMP GP-FUEL INJECTION
For full view, you need register
Parts for your C2.2 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-5592 M | [3] | NUT (M8X1.25-THD) | |
| 2. | 153-5960 M | [3] | NUT (M6X1-THD) | |
| 3. | 290-8014 | [6] | CLAMP | |
| 5. | 154-2713 M | [2] | BOLT (M8X1.25X20-MM) | |
| 6. | 154-2715 | [2] | WASHER | |
| 7. | 426-4357 | [4] | GASKET | |
| 8. | 351-2622 B | [1] | SHIM (0.20-MM THK, BEADED) | |
| 351-2621 B | [1] | SHIM (0.30-MM THK, BEADED) | ||
| 351-2620 B | [1] | SHIM (0.40-MM THK, BEADED) | ||
| 351-2619 B | [1] | SHIM (0.50-MM THK, BEADED) | ||
| 351-2618 B | [1] | SHIM (0.50-MM THK) | ||
| 9. | 252-1446 | [4] | INJECTOR AS-FUEL | |
| (EACH INCLUDES) | ||||
| 9A. | 202-1196 | [1] | WASHER-SPECIAL | |
| 9B. | 205-4731 | [1] | NUT | |
| 10. | 183-3353 M | [3] | BOLT (M6X1X25-MM) | |
| 11. | 190-3803 | [1] | BOLT | |
| 12. | 295-8183 Y | [1] | PUMP GP-FUEL INJECTION | |
| 13. | 217-2760 | [1] | TUBE AS (CYL NO. 1) | |
| 14. | 217-2761 | [1] | TUBE AS (CYL NO. 2) | |
| 15. | 217-2762 | [1] | TUBE AS (CYL NO. 3) | |
| 16. | 217-2763 | [1] | TUBE AS (CYL NO. 4) | |
| 17. | 311-7561 | [1] | TUBE | |
| 18. | 163-5372 | [1] | WASHER (8X15.4X4-MM THK) | |
| 19. | 102-2079 M | [1] | BOLT (M8X1.25X20-MM) | |
| 20. | 154-0393 | [3] | STUD | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43290448
268-9240: PUMP GP-FUEL INJECTION
268-9240 PUMP GP-FUEL INJECTION
For full view, you need register
Parts for your C2.2 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-5592 M | [3] | NUT (M8X1.25-THD) | |
| 2. | 153-5960 M | [3] | NUT (M6X1-THD) | |
| 3. | 290-8014 | [6] | CLAMP | |
| 4. | 153-6412 | [1] | WASHER | |
| 5. | 154-2713 M | [1] | BOLT (M8X1.25X20-MM) | |
| 6. | 154-2715 | [2] | WASHER | |
| 7. | 426-4357 | [4] | GASKET | |
| 8. | 252-1446 | [4] | INJECTOR AS-FUEL | |
| (EACH INCLUDES) | ||||
| 8A. | 202-1196 | [1] | WASHER-SPECIAL | |
| 8B. | 205-4731 | [1] | NUT | |
| 9. | 163-5372 | [2] | WASHER (8X15.4X4-MM THK) | |
| 10. | 183-3353 M | [3] | BOLT (M6X1X25-MM) | |
| 11. | 190-3803 | [1] | BOLT | |
| 12. | 295-8183 Y | [1] | PUMP GP-FUEL INJECTION | |
| 13. | 217-2760 | [1] | TUBE AS (CYL NO. 1) | |
| 14. | 217-2761 | [1] | TUBE AS (CYL NO. 2) | |
| 15. | 217-2762 | [1] | TUBE AS (CYL NO. 3) | |
| 16. | 217-2763 | [1] | TUBE AS (CYL NO. 4) | |
| 17. | 425-7981 C | [1] | SOLENOID (FUEL SHUTOFF) | |
| 18. | 311-7561 | [1] | TUBE | |
| 19. | 351-2622 B | [1] | SHIM (0.20-MM THK, BEADED) | |
| 351-2621 B | [1] | SHIM (0.30-MM THK, BEADED) | ||
| 351-2620 B | [1] | SHIM (0.40-MM THK, BEADED) | ||
| 351-2619 B | [1] | SHIM (0.50-MM THK, BEADED) | ||
| 351-2618 B | [1] | SHIM (0.50-MM THK) | ||
| 351-2617 B | [1] | SHIM (0.25-MM THK, BEADED) | ||
| 351-3132 B | [1] | SHIM (0.35-MM THK, BEADED) | ||
| 20. | 102-2079 M | [2] | BOLT (M8X1.25X20-MM) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43290449
270-6757: PUMP GP-FUEL INJECTION
270-6757 PUMP GP-FUEL INJECTION
Type 1
Type 1
For full view, you need register
Parts for your C2.2 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-5592 M | [3] | NUT (M8X1.25-THD) | |
| 2. | 153-5960 M | [3] | NUT (M6X1-THD) | |
| 3. | 290-8014 | [6] | CLAMP | |
| 4. | 153-6412 | [1] | WASHER | |
| 5. | 154-2713 M | [1] | BOLT (M8X1.25X20-MM) | |
| 6. | 154-2715 | [3] | WASHER | |
| 7. | 426-4357 | [4] | GASKET | |
| 8. | 163-5372 | [2] | WASHER (8X15.4X4-MM THK) | |
| 9. | 183-3353 M | [3] | BOLT (M6X1X25-MM) | |
| 10. | 190-3803 | [1] | BOLT | |
| 11. | 295-8183 Y | [1] | PUMP GP-FUEL INJECTION | |
| 12. | 217-2760 | [1] | TUBE AS (CYL NO. 1) | |
| 13. | 217-2761 | [1] | TUBE AS (CYL NO. 2) | |
| 14. | 217-2762 | [1] | TUBE AS (CYL NO. 3) | |
| 15. | 217-2763 | [1] | TUBE AS (CYL NO. 4) | |
| 16. | 311-7561 | [1] | TUBE | |
| 17. | 425-7981 | [1] | SOLENOID (FUEL SHUTOFF) | |
| 18. | 102-2079 M | [2] | BOLT (M8X1.25X20-MM) | |
| 19. | 252-1446 | [4] | INJECTOR AS-FUEL | |
| (EACH INCLUDES) | ||||
| 19A. | 202-1196 | [1] | WASHER-SPECIAL | |
| 19B. | 205-4731 | [1] | NUT | |
| 20. | 351-2622 B | [1] | SHIM (0.20-MM THK, BEADED) | |
| 351-2621 B | [1] | SHIM (0.30-MM THK, BEADED) | ||
| 351-2620 B | [1] | SHIM (0.40-MM THK, BEADED) | ||
| 351-2619 B | [1] | SHIM (0.50-MM THK, BEADED) | ||
| 351-2618 B | [1] | SHIM (0.50-MM THK) | ||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
FUEL SYSTEM
FILTER GP-FUEL
Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Primary Filter/Water Separator - Drain
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Fuel System Secondary Filter - Replace
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Filter Base - Remove
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
Fuel Filter Base - Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines
