AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

241-7438 AXLE AR-REAR S/N H2E1-99999 PART OF 198-4651 POWER TRAIN AR Type 1 M322C WHEELED EXCAVATOR


POWER TRAIN
AXLE GP

WHEELED EXCAVATOR M322C WHEELED EXCAVATOR H2E
 M322C Excavator H2E00001-UP (MACHINE) POWERED BY 3056E Engine SEBP4342 M322C H2E   (2002)

POWER TRAIN

AXLE GP
AXLE AR-FRONT
241-7439 AXLE AR-FRONT
AXLE AR-FRONT
241-7439 AXLE AR-FRONT
AXLE AR-REAR
241-7438 AXLE AR-REAR
AXLE AR-REAR
241-7438 AXLE AR-REAR
AXLE AR-REAR
241-7440 AXLE AR-REAR
AXLE AR-REAR
241-7440 AXLE AR-REAR
 

#SEBP43420180
 

241-7438: AXLE AR-REAR

241-7438 AXLE AR-REAR
S/N H2E1-99999
PART OF 198-4651 POWER TRAIN AR
Type 1
i02188329 SEBP4342
2417438 AXLE AR-REAR Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-0965 [20] RING  
2. 5W-1386 M [20] NUT (M22X1.5-THD)  
3. 303-9446 [20] LOCKWASHER  
4. 8U-5923 [2] FITTING AS  
5. 237-4545 Y [1] AXLE & TRANSMISSION AR  
6. 241-6199 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  8T-6850 [1] SEAL-O-RING  
  241-6192 [1] ELBOW  
7. 6V-6560 [2] SEAL-O-RING  
8. 6V-7676 M [8] NUT (M24X3-THD)  
9. 6V-8398 [3] SEAL-O-RING  
10. 8T-4167 [16] WASHER-HARD (26X44X4-MM THK)  
11. 9X-8477 M [8] BOLT (M24X3X280-MM)  
12. 8T-6850 [1] SEAL-O-RING  
13. 8T-7488 [1] CONNECTOR  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43420181
 

241-7438: AXLE AR-REAR

241-7438 AXLE AR-REAR
S/N H2E1-99999
PART OF 198-4651 POWER TRAIN AR
Type 2
i03740122 SEBP4342
2417438 AXLE AR-REAR Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-0965 [20] RING  
2. 303-9445 M [20] NUT-HEX FLANGE (M22X1.5-THD)  
3. 303-9446 [20] LOCKWASHER  
4. 8U-5923 [2] FITTING AS  
5. 331-1410 CY [1] AXLE & TRANSMISSION AR  
6. 241-6199 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  8T-6850 [1] SEAL-O-RING  
  227-0061 [1] ELBOW  
7. 6V-6560 [2] SEAL-O-RING  
8. 6V-7676 M [8] NUT (M24X3-THD)  
9. 6V-8398 [3] SEAL-O-RING  
10. 8T-4167 [16] WASHER-HARD (26X44X4-MM THK)  
11. 9X-8477 M [8] BOLT (M24X3X280-MM)  
12. 8T-6850 [1] SEAL-O-RING  
13. 8T-7488 [1] CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43420182
 

241-7440: AXLE AR-REAR

241-7440 AXLE AR-REAR
S/N H2E1-99999
PART OF 244-1284 UNDERCARRIAGE AR
Type 1
AN ATTACHMENT
i02180119 SEBP4342
2417440 AXLE AR-REAR Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-0965 [20] RING  
2. 5W-1386 M [20] NUT (M22X1.5-THD)  
3. 303-9446 [20] LOCKWASHER  
4. 8U-5923 [2] FITTING AS  
5. 104-9255 [8] BOLT (M24X3X320-MM)  
6. 237-4545 Y [1] AXLE & TRANSMISSION AR  
7. 241-6199 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  8T-6850 [1] SEAL-O-RING  
  241-6192 [1] ELBOW  
8. 6V-6560 [2] SEAL-O-RING  
9. 6V-7676 M [8] NUT (M24X3-THD)  
10. 6V-8398 [3] SEAL-O-RING  
11. 8T-4167 [16] WASHER-HARD (26X44X4-MM THK)  
12. 8T-6850 [1] SEAL-O-RING  
13. 8T-7488 [1] CONNECTOR  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43420183
 

241-7440: AXLE AR-REAR

241-7440 AXLE AR-REAR
S/N H2E1-99999
PART OF 244-1284 UNDERCARRIAGE AR
Type 2
AN ATTACHMENT
i03740181 SEBP4342
2417440 AXLE AR-REAR Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-0965 [20] RING  
2. 303-9445 M [20] NUT-HEX FLANGE (M22X1.5-THD)  
3. 303-9446 [20] LOCKWASHER  
4. 8U-5923 [2] FITTING AS  
5. 104-9255 [8] BOLT (M24X3X320-MM)  
6. 331-1410 CY [1] AXLE & TRANSMISSION AR  
7. 241-6199 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  8T-6850 [1] SEAL-O-RING  
  227-0061 [1] ELBOW  
8. 6V-6560 [2] SEAL-O-RING  
9. 6V-7676 M [8] NUT (M24X3-THD)  
10. 6V-8398 [3] SEAL-O-RING  
11. 8T-4167 [16] WASHER-HARD (26X44X4-MM THK)  
12. 8T-6850 [1] SEAL-O-RING  
13. 8T-7488 [1] CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43420184
 

237-4540: AXLE GP-STEERING

237-4540 AXLE GP-STEERING
S/N H2E1-99999
PART OF 241-7437 AXLE & MTG AR-FRONT, 241-7439 AXLE AR-FRONT
Type 1
ALSO AN ATTACHMENT
i02180117 SEBP4342
2374540 AXLE GP-STEERING Parts scheme 2374540 AXLE GP-STEERING Parts scheme 2374540 AXLE GP-STEERING Parts scheme 2374540 AXLE GP-STEERING Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 269-2405 [1] GEAR-CROWN  
2. 269-2406 [1] PINION  
3. 110-0124 [1] SHIM (2-MM THK)  
  110-0122 B [1] SHIM (1.8-MM THK)  
  110-0121 B [1] SHIM (1.5-MM THK)  
  110-0120 B [1] SHIM (1.2-MM THK)  
  129-9912 B [1] SHIM (1.9-MM THK)  
  129-9913 B [1] SHIM (1.7-MM THK)  
  129-9914 B [1] SHIM (1.6-MM THK)  
  129-9915 B [1] SHIM (1.4-MM THK)  
  129-9916 B [1] SHIM (1.3-MM THK)  
  190-8567 B [1] SHIM (1-MM THK)  
  190-8566 B [1] SHIM (0.9-MM THK)  
  190-8565 B [1] SHIM (0.8-MM THK)  
  190-8563 B [1] SHIM (0.7-MM THK)  
  190-8561 B [1] SHIM (0.6-MM THK)  
  5W-2074 B [1] SHIM (0.5-MM THK)  
  5W-2073 B [1] SHIM (0.3-MM THK)  
  5W-3644 B [1] SHIM (0.2-MM THK)  
  5W-2072 B [1] SHIM (0.1-MM THK)  
  193-1123 B [1] SHIM (0.75-MM THK)  
  193-1124 B [1] SHIM (0.65-MM THK)  
4. 5W-2770 [5] RACE-BEARING  
5. 110-0158 B [1] RING (16-MM THK)  
  110-0157 B [1] RING (16.1-MM THK)  
  110-0156 B [1] RING (16.2-MM THK)  
  110-0155 B [1] RING (16.3-MM THK)  
  110-0154 B [1] RING (16.4-MM THK)  
  110-0153 B [1] RING (16.5-MM THK)  
  110-0152 B [1] RING (16.6-MM THK)  
  110-0151 B [1] RING (16.7-MM THK)  
  110-0150 B [1] RING (16.8-MM THK)  
  110-0146 B [1] RING (16.92-MM THK)  
  110-0140 B [1] RING (17.1-MM THK)  
  110-0139 B [1] RING (17.2-MM THK)  
  110-0138 B [1] RING (17.3-MM THK)  
  110-0137 B [1] RING (17.4-MM THK)  
  110-0148 B [1] RING (16.86-MM THK)  
  110-0144 B [1] RING (16.98-MM THK)  
  110-0142 B [1] RING (17.04-MM THK)  
  202-9635 B [1] RING (16.56-MM THK)  
  202-9636 B [1] RING (16.62-MM THK)  
  202-9637 B [1] RING (16.64-MM THK)  
  202-9643 B [1] RING (16.68-MM THK)  
  202-9644 B [1] RING (16.72-MM THK)  
  202-9669 B [1] RING (16.74-MM THK)  
  202-9670 B [1] RING (16.76-MM THK)  
  202-9671 B [1] RING (16.78-MM THK)  
  202-9672 B [1] RING (16.82-MM THK)  
  202-9673 B [1] RING (16.84-MM THK)  
  202-9679 B [1] RING (16.88-MM THK)  
  202-9680 B [1] RING (16.9-MM THK)  
  202-9681 B [1] RING (16.94-MM THK)  
  193-1454 B [1] RING (16.66-MM THK)  
  193-1455 B [1] RING (16.96-MM THK)  
  193-1458 B [1] RING (17-MM THK)  
  193-1460 B [1] RING (17.02-MM THK)  
  193-1461 B [1] RING (17.06-MM THK)  
  193-1462 B [1] RING (17.08-MM THK)  
  193-1463 B [1] RING (17.12-MM THK)  
  193-1464 B [1] RING (17.14-MM THK)  
  193-1465 B [1] RING (17.16-MM THK)  
  193-1466 B [1] RING (17.18-MM THK)  
  193-1467 B [1] RING (17.22-MM THK)  
  193-1469 B [1] RING (17.24-MM THK)  
  193-1470 B [1] RING (17.26-MM THK)  
6. 269-2407 [1] BEARING-ROLLER  
7. 269-2408 [1] SEAL-RING  
8. 8U-2506 [1] WASHER (30.5X55.5X6-MM THK)  
9. 110-0848 M [1] NUT (M30X1.5-THD)  
10. 5W-3242 [1] FLANGE  
11. 269-2410 [1] SHEET  
12. 5W-2153 [8] BOLT (M10X1X28-MM)  
13. 190-8587 [1] HOUSING  
14. 8U-2317 [2] GEAR (16-TEETH)  
15. 8U-2320 [2] WASHER  
16. 213-9759 [4] GEAR-BEVEL  
17. 110-0845 [4] WASHER-THRUST  
18. 110-2467 [1] SHAFT-DIFFERENTIAL  
19. 110-2460 M [4] BOLT (M12X1.5X95-MM)  
20. 110-2461 M [8] BOLT (M16X1.5X100-MM)  
21. 110-2457 [4] PIN-SPRING  
22. 110-2458 [4] PIN-SPRING  
23. 269-2411 [2] HOUSING-AXLE  
24. 269-2412 [1] HOUSING  
25. 220-2593 [4] BUSHING-SLEEVE  
26. 269-2413 [4] SEAL-RING  
27. 173-8253 [2] SLEEVE  
28. 269-2414 Y [2] UNIVERSAL JOINT GP  
29. 269-2415 Y [1] TIE ROD GP (LH)  
30. 269-2416 Y [1] TIE ROD GP (RH)  
31. 110-0181 B [2] RING (2-MM THK)  
  110-0182 B [2] RING (1.95-MM THK)  
  110-0183 B [2] RING (1.9-MM THK)  
  110-0184 B [2] RING (1.85-MM THK)  
  098-2962 B [2] SHIM (1.8-MM THK)  
  098-2960 B [2] SHIM (1.6-MM THK)  
  098-2959 B [2] SHIM (1.5-MM THK)  
  098-2958 B [2] SHIM (1.4-MM THK)  
  098-2957 B [2] SHIM (1.3-MM THK)  
  110-0191 B [2] RING (1.25-MM THK)  
  6T-8668 B [2] SHIM (1.2-MM THK)  
  110-0192 B [2] RING (1.15-MM THK)  
  6T-8669 B [2] SHIM (1.1-MM THK)  
  110-0193 B [2] RING (1.05-MM THK)  
  6T-8670 B [2] SHIM (1-MM THK)  
  110-0194 B [2] RING (0.95-MM THK)  
  110-0195 B [2] RING (0.9-MM THK)  
  110-0167 B [2] WASHER (90X99.8X0.85-MM THK)  
  6T-8671 B [2] SHIM (0.8-MM THK)  
  110-0168 B [2] WASHER (90X99.8X0.75-MM THK)  
  6T-8672 B [2] SHIM (0.7-MM THK)  
  110-0169 B [2] WASHER (90X99.8X0.65-MM THK)  
  6T-8673 B [2] SHIM (0.6-MM THK)  
  6T-8674 B [2] SHIM (0.5-MM THK)  
  110-0177 B [2] WASHER (90X99.8X0.45-MM THK)  
  6T-8675 B [2] SHIM (0.4-MM THK)  
  110-0178 B [2] WASHER (90X99.8X0.35-MM THK)  
  110-0180 B [2] WASHER (90X99.8X0.3-MM THK)  
  193-1125 B [2] SHIM (0.1-MM THK)  
  193-1127 B [2] SHIM (0.15-MM THK)  
32. 8U-2306 [1] BEARING  
33. 110-2463 [1] BEARING-ROLLER  
34. 270-4969 [2] SEAL-O-RING  
35. 275-2231 M [36] BOLT (M18X1.5X65-MM)  
36. 5W-5531 [36] WASHER (19X30X3-MM THK)  
37. 263-3629 [3] PLUG AS  
38. 203-0215 [4] SEAL-O-RING  
39. 263-3630 [1] PLUG AS-MAGNET  
40. 269-2417 [1] HOUSING GP-AXLE  
41. 269-2418 [1] HOUSING GP-AXLE  
43. 269-2419 [4] CAP-SEALING  
44. 5W-1757 [4] SEAL-O-RING  
45. 8U-2345 [2] SHIM (0.6-MM THK)  
  8U-2346 B [2] SHIM (1-MM THK)  
  8U-2347 B [2] SHIM (1.4-MM THK)  
  8U-2348 B [2] SHIM (1.6-MM THK)  
  8U-2349 B [2] SHIM (1.8-MM THK)  
  8U-2350 B [2] SHIM (2-MM THK)  
  135-3430 B [2] SHIM (0.8-MM THK)  
  135-3431 B [2] SHIM (0.9-MM THK)  
  135-3432 B [2] SHIM (1.1-MM THK)  
  135-3433 B [2] SHIM (1.2-MM THK)  
  135-3434 B [2] SHIM (1.3-MM THK)  
  135-3435 B [2] SHIM (1.5-MM THK)  
46. 269-2420 [2] PIN-BEARING  
47. 9R-3171 [2] FITTING  
48. 135-3437 [4] SEAL-O-RING  
49. 135-9422 M [16] BOLT (M18X2.5X50-MM)  
50. 269-2421 [2] PIN-BEARING  
51. 128-7867 [2] FITTING-HYDRAULIC  
52. 243-0917 [2] WASHER-THRUST  
53. 243-0918 [2] WASHER-THRUST  
54. 110-0846 [2] RING-RETAINING  
55. 5W-5682 [2] VALVE AS-PURGE  
56. 8U-2354 B [2] SHIM (6-MM THK)  
  5W-6405 B [2] SHIM (6.5-MM THK)  
  5W-7644 B [2] SHIM (4-MM THK)  
  5W-7642 B [2] SHIM (5-MM THK)  
  5W-7641 B [2] SHIM (5.5-MM THK)  
  5W-7643 B [2] SHIM (4.5-MM THK)  
  128-1733 B [2] SHIM (2-MM THK)  
  128-1734 B [2] SHIM (3-MM THK)  
  5W-6408 B [2] WASHER (18.5X35X8-MM THK)  
  202-8145 B [2] WASHER (18.5X35X9-MM THK)  
  202-8146 B [2] WASHER (18.5X35X11-MM THK)  
  202-8147 B [2] WASHER (18.5X35X12-MM THK)  
  202-8148 B [2] WASHER (18.5X35X13-MM THK)  
  202-8149 B [1] WASHER (18.5X35X14-MM THK)  
57. 5W-2173 M [4] BOLT (M18X2.5X40-MM)  
58. 241-8122 M [1] NUT (M18X2.5-THD)  
63. 278-7552 Y [1] CYLINDER GP-STEERING  
67. 6V-3823 M [6] BOLT (M12X1.75X60-MM)  
68. 269-2430 [2] RING  
69. 121-8167 [2] BEARING-ROLLER  
70. 269-2431 [2] BEARING-ROLLER  
71. 269-2432 [2] HUB  
72. 110-4745 [2] SEAL-O-RING  
73. 263-3701 [2] GEAR-CARRIER  
74. 8U-2359 [4] SEAL-O-RING  
75. 276-3188 [2] SEAL-O-RING  
76. 298-2314 [2] GEAR-INTERNAL  
77. 263-3703 [2] PISTON  
78. 263-4057 [8] DOWEL  
79. 8U-2373 [2] SEAL  
80. 238-3303 [2] RING (2-MM THK)  
81. 8U-0754 [2] SEAL  
82. 238-3304 [2] RING (2-MM THK)  
83. 8U-3592 [16] SPRING  
84. 238-3305 [16] SPRING  
85. 298-2315 [16] BOLT-SPECIAL  
86. 8U-3591 [16] SPACER (6.5X15X7-MM THK)  
87. 263-3704 [14] DISC-CLUTCH (4.5-MM THK)  
88. 238-3307 B [14] DISC-CLUTCH (2-MM THK)  
  238-3308 B [14] DISC-CLUTCH (3-MM THK)  
  238-3309 B [14] DISC-CLUTCH (2.5-MM THK)  
  110-0165 B [2] WASHER-THRUST (1.5-MM THK)  
  110-0164 B [2] WASHER-THRUST (1.7-MM THK)  
  110-0163 B [2] WASHER-THRUST (2-MM THK)  
  110-0162 B [2] WASHER-THRUST (2.2-MM THK)  
  110-0161 B [2] WASHER-THRUST (2.5-MM THK)  
  110-0160 B [2] WASHER-THRUST (2.7-MM THK)  
  110-0159 B [2] WASHER-THRUST (3-MM THK)  
89. 238-3310 [2] HOUSING  
90. 238-3311 [6] GEAR-PLANETARY  
91. 213-9783 [6] BEARING-ROLLER  
92. 190-8591 [12] WASHER (64.5X72.1X2-MM THK)  
93. 190-8590 [12] RING-SNAP  
94. 110-4737 [6] RING-RETAINING  
95. 110-2455 M [4] BOLT (M12X1.5X20-MM)  
96. 9R-3168 M [2] SCREW (M10X1.5X20-MM)  
97. 238-3312 [20] STUD-WHEEL  
98. 271-5030 M [2] LOCKNUT (M30X1.5-THD)  
   
    (PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY)
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43420185
 

237-4540: AXLE GP-STEERING

237-4540 AXLE GP-STEERING
S/N H2E1-99999
PART OF 241-7437 AXLE & MTG AR-FRONT, 241-7439 AXLE AR-FRONT
Type 2
ALSO AN ATTACHMENT
i02676847 SEBP4342
2374540 AXLE GP-STEERING Parts scheme 2374540 AXLE GP-STEERING Parts scheme 2374540 AXLE GP-STEERING Parts scheme 2374540 AXLE GP-STEERING Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 269-2405 [1] GEAR-CROWN  
2. 269-2406 [1] PINION  
3. 110-0124 [1] SHIM (2-MM THK)  
  110-0122 B [1] SHIM (1.8-MM THK)  
  110-0121 B [1] SHIM (1.5-MM THK)  
  110-0120 B [1] SHIM (1.2-MM THK)  
  129-9912 B [1] SHIM (1.9-MM THK)  
  129-9913 B [1] SHIM (1.7-MM THK)  
  129-9914 B [1] SHIM (1.6-MM THK)  
  129-9915 B [1] SHIM (1.4-MM THK)  
  129-9916 B [1] SHIM (1.3-MM THK)  
  190-8567 B [1] SHIM (1-MM THK)  
  190-8566 B [1] SHIM (0.9-MM THK)  
  190-8565 B [1] SHIM (0.8-MM THK)  
  190-8563 B [1] SHIM (0.7-MM THK)  
  190-8561 B [1] SHIM (0.6-MM THK)  
  5W-2074 B [1] SHIM (0.5-MM THK)  
  5W-2073 B [1] SHIM (0.3-MM THK)  
  5W-3644 B [1] SHIM (0.2-MM THK)  
  5W-2072 B [1] SHIM (0.1-MM THK)  
  193-1123 B [1] SHIM (0.75-MM THK)  
  193-1124 B [1] SHIM (0.65-MM THK)  
4. 5W-2770 [5] RACE-BEARING  
5. 110-0158 B [1] RING (16-MM THK)  
  110-0157 B [1] RING (16.1-MM THK)  
  110-0156 B [1] RING (16.2-MM THK)  
  110-0155 B [1] RING (16.3-MM THK)  
  110-0154 B [1] RING (16.4-MM THK)  
  110-0153 B [1] RING (16.5-MM THK)  
  110-0152 B [1] RING (16.6-MM THK)  
  110-0151 B [1] RING (16.7-MM THK)  
  110-0150 B [1] RING (16.8-MM THK)  
  110-0146 B [1] RING (16.92-MM THK)  
  110-0140 B [1] RING (17.1-MM THK)  
  110-0139 B [1] RING (17.2-MM THK)  
  110-0138 B [1] RING (17.3-MM THK)  
  110-0137 B [1] RING (17.4-MM THK)  
  110-0148 B [1] RING (16.86-MM THK)  
  110-0144 B [1] RING (16.98-MM THK)  
  110-0142 B [1] RING (17.04-MM THK)  
  202-9635 B [1] RING (16.56-MM THK)  
  202-9636 B [1] RING (16.62-MM THK)  
  202-9637 B [1] RING (16.64-MM THK)  
  202-9643 B [1] RING (16.68-MM THK)  
  202-9644 B [1] RING (16.72-MM THK)  
  202-9669 B [1] RING (16.74-MM THK)  
  202-9670 B [1] RING (16.76-MM THK)  
  202-9671 B [1] RING (16.78-MM THK)  
  202-9672 B [1] RING (16.82-MM THK)  
  202-9673 B [1] RING (16.84-MM THK)  
  202-9679 B [1] RING (16.88-MM THK)  
  202-9680 B [1] RING (16.9-MM THK)  
  202-9681 B [1] RING (16.94-MM THK)  
  193-1454 B [1] RING (16.66-MM THK)  
  193-1455 B [1] RING (16.96-MM THK)  
  193-1458 B [1] RING (17-MM THK)  
  193-1460 B [1] RING (17.02-MM THK)  
  193-1461 B [1] RING (17.06-MM THK)  
  193-1462 B [1] RING (17.08-MM THK)  
  193-1463 B [1] RING (17.12-MM THK)  
  193-1464 B [1] RING (17.14-MM THK)  
  193-1465 B [1] RING (17.16-MM THK)  
  193-1466 B [1] RING (17.18-MM THK)  
  193-1467 B [1] RING (17.22-MM THK)  
  193-1469 B [1] RING (17.24-MM THK)  
  193-1470 B [1] RING (17.26-MM THK)  
6. 269-2407 [1] BEARING-ROLLER  
7. 269-2408 [1] SEAL-RING  
8. 8U-2506 [1] WASHER (30.5X55.5X6-MM THK)  
9. 110-0848 M [1] NUT (M30X1.5-THD)  
10. 5W-3242 [1] FLANGE  
11. 269-2410 [1] SHEET  
12. 5W-2153 [8] BOLT (M10X1X28-MM)  
13. 190-8587 [1] HOUSING  
14. 8U-2317 [2] GEAR (16-TEETH)  
15. 8U-2320 [2] WASHER  
16. 213-9759 [4] GEAR-BEVEL  
17. 110-0845 [4] WASHER-THRUST  
18. 110-2467 [1] SHAFT-DIFFERENTIAL  
19. 110-2460 M [4] BOLT (M12X1.5X95-MM)  
20. 110-2461 M [8] BOLT (M16X1.5X100-MM)  
21. 110-2457 [4] PIN-SPRING  
22. 110-2458 [4] PIN-SPRING  
23. 269-2411 [2] HOUSING-AXLE  
24. 269-2412 [1] HOUSING  
25. 220-2593 [4] BUSHING-SLEEVE  
26. 269-2413 [4] SEAL-RING  
27. 173-8253 [2] SLEEVE  
28. 269-2414 Y [2] UNIVERSAL JOINT GP  
29. 269-2415 Y [1] TIE ROD GP (LH)  
30. 269-2416 Y [1] TIE ROD GP (RH)  
31. 110-0181 B [2] RING (2-MM THK)  
  110-0182 B [2] RING (1.95-MM THK)  
  110-0183 B [2] RING (1.9-MM THK)  
  110-0184 B [2] RING (1.85-MM THK)  
  098-2962 B [2] SHIM (1.8-MM THK)  
  098-2960 B [2] SHIM (1.6-MM THK)  
  098-2959 B [2] SHIM (1.5-MM THK)  
  098-2958 B [2] SHIM (1.4-MM THK)  
  098-2957 B [2] SHIM (1.3-MM THK)  
  110-0191 B [2] RING (1.25-MM THK)  
  6T-8668 B [2] SHIM (1.2-MM THK)  
  110-0192 B [2] RING (1.15-MM THK)  
  6T-8669 B [2] SHIM (1.1-MM THK)  
  110-0193 B [2] RING (1.05-MM THK)  
  6T-8670 B [2] SHIM (1-MM THK)  
  110-0194 B [2] RING (0.95-MM THK)  
  110-0195 B [2] RING (0.9-MM THK)  
  110-0167 B [2] WASHER (90X99.8X0.85-MM THK)  
  6T-8671 B [2] SHIM (0.8-MM THK)  
  110-0168 B [2] WASHER (90X99.8X0.75-MM THK)  
  6T-8672 B [2] SHIM (0.7-MM THK)  
  110-0169 B [2] WASHER (90X99.8X0.65-MM THK)  
  6T-8673 B [2] SHIM (0.6-MM THK)  
  6T-8674 B [2] SHIM (0.5-MM THK)  
  110-0177 B [2] WASHER (90X99.8X0.45-MM THK)  
  6T-8675 B [2] SHIM (0.4-MM THK)  
  110-0178 B [2] WASHER (90X99.8X0.35-MM THK)  
  110-0180 B [2] WASHER (90X99.8X0.3-MM THK)  
  193-1125 B [2] SHIM (0.1-MM THK)  
  193-1127 B [2] SHIM (0.15-MM THK)  
32. 8U-2306 [1] BEARING  
33. 110-2463 [1] BEARING-ROLLER  
34. 270-4969 [2] SEAL-O-RING  
35. 275-2231 M [36] BOLT (M18X1.5X65-MM)  
36. 5W-5531 [36] WASHER (19X30X3-MM THK)  
37. 263-3629 [3] PLUG AS  
38. 203-0215 [4] SEAL-O-RING  
39. 263-3630 [1] PLUG AS-MAGNET  
40. 269-2417 J [1] HOUSING GP-AXLE  
  243-0378 [1] NUT  
41. 269-2418 L [1] HOUSING GP-AXLE  
  243-0378 [1] NUT  
43. 269-2419 [4] CAP-SEALING  
44. 5W-1757 [4] SEAL-O-RING  
45. 8U-2345 [2] SHIM (0.6-MM THK)  
  8U-2346 B [2] SHIM (1-MM THK)  
  8U-2347 B [2] SHIM (1.4-MM THK)  
  8U-2348 B [2] SHIM (1.6-MM THK)  
  8U-2349 B [2] SHIM (1.8-MM THK)  
  8U-2350 B [2] SHIM (2-MM THK)  
  135-3430 B [2] SHIM (0.8-MM THK)  
  135-3431 B [2] SHIM (0.9-MM THK)  
  135-3432 B [2] SHIM (1.1-MM THK)  
  135-3433 B [2] SHIM (1.2-MM THK)  
  135-3434 B [2] SHIM (1.3-MM THK)  
  135-3435 B [2] SHIM (1.5-MM THK)  
46. 269-2420 [2] PIN-BEARING  
47. 9R-3171 [2] FITTING  
48. 135-3437 [4] SEAL-O-RING  
49. 135-9422 M [16] BOLT (M18X2.5X50-MM)  
50. 269-2421 [2] PIN-BEARING  
51. 128-7867 [2] FITTING-HYDRAULIC  
52. 243-0917 [2] WASHER-THRUST  
53. 243-0918 [2] WASHER-THRUST  
54. 110-0846 [2] RING-RETAINING  
55. 5W-5682 [2] VALVE AS-PURGE  
56. 8U-2354 B [2] SHIM (6-MM THK)  
  5W-6405 B [2] SHIM (6.5-MM THK)  
  5W-7644 B [2] SHIM (4-MM THK)  
  5W-7642 B [2] SHIM (5-MM THK)  
  5W-7641 B [2] SHIM (5.5-MM THK)  
  5W-7643 B [2] SHIM (4.5-MM THK)  
  128-1733 B [2] SHIM (2-MM THK)  
  128-1734 B [2] SHIM (3-MM THK)  
  5W-6408 B [2] WASHER (18.5X35X8-MM THK)  
  202-8145 B [2] WASHER (18.5X35X9-MM THK)  
  202-8146 B [2] WASHER (18.5X35X11-MM THK)  
  202-8147 B [2] WASHER (18.5X35X12-MM THK)  
  202-8148 B [2] WASHER (18.5X35X13-MM THK)  
  202-8149 B [1] WASHER (18.5X35X14-MM THK)  
57. 5W-2173 M [4] BOLT (M18X2.5X40-MM)  
58. 241-8122 M [1] NUT (M18X2.5-THD)  
63. 278-7552 Y [1] CYLINDER GP-STEERING  
67. 6V-3823 M [6] BOLT (M12X1.75X60-MM)  
68. 269-2430 [2] RING  
69. 121-8167 [2] BEARING-ROLLER  
70. 269-2431 [2] BEARING-ROLLER  
71. 269-2432 [2] HUB  
72. 110-4745 [2] SEAL-O-RING  
73. 263-3701 [2] GEAR-CARRIER  
74. 8U-2359 [4] SEAL-O-RING  
75. 276-3188 [2] SEAL-O-RING  
76. 298-2314 C [2] GEAR-INTERNAL  
77. 263-3703 [2] PISTON  
78. 263-4057 [8] DOWEL  
79. 8U-2373 [2] SEAL  
80. 238-3303 [2] RING (2-MM THK)  
81. 8U-0754 [2] SEAL  
82. 238-3304 [2] RING (2-MM THK)  
83. 8U-3592 [16] SPRING  
84. 238-3305 [16] SPRING  
85. 298-2315 C [16] BOLT-SPECIAL  
86. 8U-3591 [16] SPACER (6.5X15X7-MM THK)  
87. 263-3704 [14] DISC-CLUTCH (4.5-MM THK)  
88. 238-3307 B [14] DISC-CLUTCH (2-MM THK)  
  238-3308 B [14] DISC-CLUTCH (3-MM THK)  
  238-3309 B [14] DISC-CLUTCH (2.5-MM THK)  
  110-0165 B [2] WASHER-THRUST (1.5-MM THK)  
  110-0164 B [2] WASHER-THRUST (1.7-MM THK)  
  110-0163 B [2] WASHER-THRUST (2-MM THK)  
  110-0162 B [2] WASHER-THRUST (2.2-MM THK)  
  110-0161 B [2] WASHER-THRUST (2.5-MM THK)  
  110-0160 B [2] WASHER-THRUST (2.7-MM THK)  
  110-0159 B [2] WASHER-THRUST (3-MM THK)  
89. 238-3310 [2] HOUSING  
90. 238-3311 [6] GEAR-PLANETARY  
91. 213-9783 [6] BEARING-ROLLER  
92. 190-8591 [12] WASHER (64.5X72.1X2-MM THK)  
93. 190-8590 [12] RING-SNAP  
94. 110-4737 [6] RING-RETAINING  
95. 110-2455 M [4] BOLT (M12X1.5X20-MM)  
96. 9R-3168 M [2] SCREW (M10X1.5X20-MM)  
97. 238-3312 [20] STUD-WHEEL  
98. 271-5030 M [2] LOCKNUT (M30X1.5-THD)  
   
    (PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY)
   
    AVAILABLE REPAIR KIT(S):
  299-9254 J [1] KIT-REPAIR  
  299-9255 L [1] KIT-REPAIR  
    EACH KIT INCLUDES AXLE HOUSING GP,SHIMS,TRUNNION, HEX HD BOLT, GREASE FITTING, BUSHING SHAFT SEAL, & LOCKNUT
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
  L   KIT MARKED L SERVICES PART(S) MARKED L
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43420186
 

331-1405: AXLE GP-STEERING

331-1405 AXLE GP-STEERING
S/N H2E1-99999
PART OF 241-7439 AXLE AR-FRONT
Type 1
AN ATTACHMENT
i03712336 SEBP4342
3311405 AXLE GP-STEERING Parts scheme 3311405 AXLE GP-STEERING Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 331-1374 [1] GEAR-CROWN  
2. 269-2406 [1] PINION  
3. 110-0124 B [1] SHIM (2-MM THK)  
  110-0122 B [1] SHIM (1.8-MM THK)  
  110-0121 B [1] SHIM (1.5-MM THK)  
  110-0120 B [1] SHIM (1.2-MM THK)  
  129-9912 B [1] SHIM (1.9-MM THK)  
  129-9913 B [1] SHIM (1.7-MM THK)  
  129-9914 B [1] SHIM (1.6-MM THK)  
  129-9915 B [1] SHIM (1.4-MM THK)  
  129-9916 B [1] SHIM (1.3-MM THK)  
  190-8567 B [1] SHIM (1-MM THK)  
  190-8566 B [1] SHIM (0.9-MM THK)  
  190-8565 B [1] SHIM (0.8-MM THK)  
  190-8563 B [1] SHIM (0.7-MM THK)  
  190-8561 B [1] SHIM (0.6-MM THK)  
  5W-2074 B [1] SHIM (0.5-MM THK)  
  5W-2073 B [1] SHIM (0.3-MM THK)  
  5W-3644 B [1] SHIM (0.2-MM THK)  
  5W-2072 B [1] SHIM (0.1-MM THK)  
  193-1123 B [1] SHIM (0.75-MM THK)  
  193-1124 B [1] SHIM (0.65-MM THK)  
  331-1378 B [1] SHIM (1.25-MM THK)  
  331-1379 B [1] SHIM (1.35-MM THK)  
  331-1381 B [1] SHIM (1.45-MM THK)  
  331-1382 B [1] SHIM (1.55-MM THK)  
  331-1383 B [1] SHIM (1.65-MM THK)  
  331-1384 B [1] SHIM (1.75-MM THK)  
  331-1386 B [1] SHIM (1.85-MM THK)  
30. 5W-2770 [1] RACE-BEARING  
31. 110-0158 B [1] RING (16-MM THK)  
  110-0157 B [1] RING (16.1-MM THK)  
  110-0156 B [1] RING (16.2-MM THK)  
  110-0155 B [1] RING (16.3-MM THK)  
  110-0154 B [1] RING (16.4-MM THK)  
  110-0153 B [1] RING (16.5-MM THK)  
  110-0152 B [1] RING (16.6-MM THK)  
  110-0151 B [1] RING (16.7-MM THK)  
  110-0150 B [1] RING (16.8-MM THK)  
  110-0146 B [1] RING (16.92-MM THK)  
  110-0140 B [1] RING (17.1-MM THK)  
  110-0139 B [1] RING (17.2-MM THK)  
  110-0138 B [1] RING (17.3-MM THK)  
  110-0137 B [1] RING (17.4-MM THK)  
  110-0148 B [1] RING (16.86-MM THK)  
  110-0144 B [1] RING (16.98-MM THK)  
  110-0142 B [1] RING (17.04-MM THK)  
  202-9635 B [1] RING (16.56-MM THK)  
  202-9636 B [1] RING (16.62-MM THK)  
  202-9637 B [1] RING (16.64-MM THK)  
  202-9643 B [1] RING (16.68-MM THK)  
  202-9644 B [1] RING (16.72-MM THK)  
  202-9669 B [1] RING (16.74-MM THK)  
  202-9670 B [1] RING (16.76-MM THK)  
  202-9671 B [1] RING (16.78-MM THK)  
  202-9672 B [1] RING (16.82-MM THK)  
  202-9673 B [1] RING (16.84-MM THK)  
  202-9679 B [1] RING (16.88-MM THK)  
  202-9680 B [1] RING (16.9-MM THK)  
  202-9681 B [1] RING (16.94-MM THK)  
  193-1454 B [1] RING (16.66-MM THK)  
  193-1455 B [1] RING (16.96-MM THK)  
  193-1458 B [1] RING (17-MM THK)  
  193-1460 B [1] RING (17.02-MM THK)  
  193-1461 B [1] RING (17.06-MM THK)  
  193-1462 B [1] RING (17.08-MM THK)  
  193-1463 B [1] RING (17.12-MM THK)  
  193-1464 B [1] RING (17.14-MM THK)  
  193-1465 B [1] RING (17.16-MM THK)  
  193-1466 B [1] RING (17.18-MM THK)  
  193-1467 B [1] RING (17.22-MM THK)  
  193-1469 B [1] RING (17.24-MM THK)  
  193-1470 B [1] RING (17.26-MM THK)  
  193-1471 B [1] RING (17.28-MM THK)  
75. 269-2407 [1] BEARING-ROLLER  
76. 269-2408 [1] SEAL-RING  
77. 8U-2506 [1] WASHER (30.5X55.5X6-MM THK)  
78. 110-0848 M [1] NUT (M30X1.5-THD)  
79. 331-1387 [1] FLANGE-DRIVE  
80. 331-1388 [1] PLATE-DEFLECTOR  
81. 331-1401 [2] WASHER-THRUST  
82. 331-1402 [2] GEAR-DIFFERENTIAL (14-TEETH)  
83. 331-1403 [4] GEAR-DIFFERENTIAL  
84. 331-1404 [4] WASHER-THRUST  
85. 333-8013 [1] CASE-DIFFERENTIAL  
86. 331-1407 [1] SPIDER  
87. 7X-2436 M [16] BOLT (M12X1.75X100-MM)  
88. 6V-8200 M [4] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
89. 110-0181 B [2] RING (2-MM THK)  
  110-0182 B [2] RING (1.95-MM THK)  
  110-0183 B [2] RING (1.9-MM THK)  
  110-0184 B [2] RING (1.85-MM THK)  
  098-2962 B [2] SHIM (1.8-MM THK)  
  098-2960 B [2] SHIM (1.6-MM THK)  
  098-2959 B [2] SHIM (1.5-MM THK)  
  098-2958 B [2] SHIM (1.4-MM THK)  
  098-2957 B [2] SHIM (1.3-MM THK)  
  110-0191 B [2] RING (1.25-MM THK)  
  6T-8668 B [2] SHIM (1.2-MM THK)  
  110-0192 B [2] RING (1.15-MM THK)  
  6T-8669 B [2] SHIM (1.1-MM THK)  
  110-0193 B [2] RING (1.05-MM THK)  
  6T-8670 B [2] SHIM (1-MM THK)  
  110-0194 B [2] RING (0.95-MM THK)  
  110-0195 B [2] RING (0.9-MM THK)  
  110-0167 B [2] WASHER (90X99.8X0.85-MM THK)  
  6T-8671 B [2] SHIM (0.8-MM THK)  
  110-0168 B [2] WASHER (90X99.8X0.75-MM THK)  
  6T-8672 B [2] SHIM (0.7-MM THK)  
  110-0169 B [2] WASHER (90X99.8X0.65-MM THK)  
  6T-8673 B [2] SHIM (0.6-MM THK)  
  6T-8674 B [2] SHIM (0.5-MM THK)  
  110-0177 B [2] WASHER (90X99.8X0.45-MM THK)  
  6T-8675 B [2] SHIM (0.4-MM THK)  
  110-0178 B [2] WASHER (90X99.8X0.35-MM THK)  
  110-0180 B [2] WASHER (90X99.8X0.3-MM THK)  
  193-1125 B [2] SHIM (0.1-MM THK)  
  193-1127 B [2] SHIM (0.15-MM THK)  
119. 8U-2306 [1] BEARING  
120. 110-2463 [1] BEARING-ROLLER  
121. 270-4969 [2] SEAL-O-RING  
122. 336-7380 M [36] BOLT (M18X2.5X65-MM)  
124. 263-3629 [3] PLUG AS  
    (EACH INCLUDES)
  203-0215 [1] SEAL-O-RING  
125. 203-0215 [1] SEAL-O-RING  
126. 263-3630 [1] PLUG AS-MAGNET (AXLE)  
128. 333-8003 [2] HOUSING-AXLE  
129. 333-8004 [1] HOUSING  
130. 220-2593 [4] BUSHING-SLEEVE  
131. 333-8005 [4] SEAL-RING  
132. 173-8253 [2] SLEEVE  
133. 269-2414 Y [2] UNIVERSAL JOINT GP  
134. 269-2415 Y [1] TIE ROD GP (LH)  
135. 269-2416 Y [1] TIE ROD GP (RH)  
136. 271-5030 M [2] LOCKNUT (M30X1.5-THD)  
137. 333-8018 [1] HOUSING GP-AXLE (LH)  
138. 333-8019 [1] HOUSING GP-AXLE (RH)  
    (EACH HOUSING GP INCLUDES)
  243-0378 [1] NUT  
139. 333-8048 [4] BEARING-TAPERED ROLLER  
140. 5W-1833 [4] CAP  
141. 5W-1855 [4] SEAL-O-RING  
142. 333-8025 [2] TRUNNION  
143. 5W-2998 [4] FITTING-GREASE  
144. 135-3437 [4] SEAL-O-RING  
145. 8T-6430 M [16] BOLT (M20X2.5X50-MM)  
146. 333-8026 [2] TRUNNION  
148. 243-0917 [2] WASHER-THRUST  
149. 243-0918 [2] WASHER-THRUST  
150. 110-0846 [2] RING-RETAINING  
151. 5W-5682 [2] VALVE AS-PURGE (AXLE)  
152. 8U-2354 B [2] SHIM (6-MM THK)  
  5W-6405 B [2] SHIM (6.5-MM THK)  
  5W-7644 B [2] SHIM (4-MM THK)  
  5W-7642 B [2] SHIM (5-MM THK)  
  5W-7641 B [2] SHIM (5.5-MM THK)  
  5W-7643 B [2] SHIM (4.5-MM THK)  
  128-1733 B [2] SHIM (2-MM THK)  
  128-1734 B [2] SHIM (3-MM THK)  
  5W-6408 B [2] WASHER (18.5X35X8-MM THK)  
  202-8145 B [2] WASHER (18.5X35X9-MM THK)  
  202-8149 B [2] WASHER (18.5X35X14-MM THK)  
163. 5W-2173 M [4] BOLT (M18X2.5X40-MM)  
164. 241-8122 M [2] NUT (M18X2.5-THD)  
165. 278-7552 Y [1] CYLINDER GP-STEERING  
166. 6V-3823 M [6] BOLT (M12X1.75X60-MM)  
167. 269-2430 [2] RING  
168. 121-8167 [2] BEARING-ROLLER  
169. 269-2431 [2] BEARING-ROLLER  
170. 333-8030 [2] HUB-FLANGE  
171. 7X-5762 [2] SEAL-O-RING  
172. 263-3701 [2] GEAR-CARRIER  
173. 320-9728 [4] SEAL-O-RING  
174. 320-9731 [2] SEAL-O-RING  
175. 298-2314 [2] GEAR-INTERNAL  
176. 328-8804 [2] PISTON  
177. 263-4057 [8] DOWEL  
178. 355-2319 [2] SEAL  
179. 238-3303 [2] RING (2-MM THK)  
180. 8U-0754 [2] SEAL  
181. 238-3304 [2] RING (2-MM THK)  
182. 8U-3592 [16] SPRING  
183. 238-3305 [16] SPRING  
184. 298-2315 [16] BOLT-SPECIAL  
185. 8U-3591 [16] SPACER (6.5X15X7-MM THK)  
186. 263-3704 [14] DISC-CLUTCH (4.5-MM THK)  
187. 238-3309 B [14] DISC-CLUTCH (2.5-MM THK)  
188. 238-3307 B [2] DISC-CLUTCH (2-MM THK)  
  238-3308 B [2] DISC-CLUTCH (3-MM THK)  
190. 110-0161 [2] WASHER-THRUST (2.5-MM THK)  
191. 333-8035 [2] CAGE-PINION  
192. 333-8036 [6] GEAR-PLANETARY  
193. 333-8050 [6] BEARING-ROLLER  
194. 110-4737 [6] RING-RETAINING  
195. 6V-3668 M [4] BOLT (M12X1.75X30-MM)  
196. 9R-3168 M [2] SCREW (M10X1.5X20-MM)  
197. 333-8037 [20] STUD-WHEEL  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43420187
 

331-1405: AXLE GP-STEERING

331-1405 AXLE GP-STEERING
S/N H2E1-99999
PART OF 241-7439 AXLE AR-FRONT
Type 2
AN ATTACHMENT
i04539505 SEBP4342
3311405 AXLE GP-STEERING Parts scheme 3311405 AXLE GP-STEERING Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 331-1374 [1] GEAR-CROWN  
2. 269-2406 [1] PINION  
3. 110-0124 B [1] SHIM (2-MM THK)  
  110-0122 B [1] SHIM (1.8-MM THK)  
  110-0121 B [1] SHIM (1.5-MM THK)  
  110-0120 B [1] SHIM (1.2-MM THK)  
  129-9912 B [1] SHIM (1.9-MM THK)  
  129-9913 B [1] SHIM (1.7-MM THK)  
  129-9914 B [1] SHIM (1.6-MM THK)  
  129-9915 B [1] SHIM (1.4-MM THK)  
  129-9916 B [1] SHIM (1.3-MM THK)  
  190-8567 B [1] SHIM (1-MM THK)  
  190-8566 B [1] SHIM (0.9-MM THK)  
  190-8565 B [1] SHIM (0.8-MM THK)  
  190-8563 B [1] SHIM (0.7-MM THK)  
  190-8561 B [1] SHIM (0.6-MM THK)  
  5W-2074 B [1] SHIM (0.5-MM THK)  
  5W-2073 B [1] SHIM (0.3-MM THK)  
  5W-3644 B [1] SHIM (0.2-MM THK)  
  5W-2072 B [1] SHIM (0.1-MM THK)  
  193-1123 B [1] SHIM (0.75-MM THK)  
  193-1124 B [1] SHIM (0.65-MM THK)  
  331-1378 B [1] SHIM (1.25-MM THK)  
  331-1379 B [1] SHIM (1.35-MM THK)  
  331-1381 B [1] SHIM (1.45-MM THK)  
  331-1382 B [1] SHIM (1.55-MM THK)  
  331-1383 B [1] SHIM (1.65-MM THK)  
  331-1384 B [1] SHIM (1.75-MM THK)  
  331-1386 B [1] SHIM (1.85-MM THK)  
31. 110-0158 B [1] RING (16-MM THK)  
  110-0157 B [1] RING (16.1-MM THK)  
  110-0156 B [1] RING (16.2-MM THK)  
  110-0155 B [1] RING (16.3-MM THK)  
  110-0154 B [1] RING (16.4-MM THK)  
  110-0153 B [1] RING (16.5-MM THK)  
  110-0152 B [1] RING (16.6-MM THK)  
  110-0151 B [1] RING (16.7-MM THK)  
  110-0150 B [1] RING (16.8-MM THK)  
  110-0146 B [1] RING (16.92-MM THK)  
  110-0140 B [1] RING (17.1-MM THK)  
  110-0139 B [1] RING (17.2-MM THK)  
  110-0138 B [1] RING (17.3-MM THK)  
  110-0137 B [1] RING (17.4-MM THK)  
  110-0148 B [1] RING (16.86-MM THK)  
  110-0144 B [1] RING (16.98-MM THK)  
  110-0142 B [1] RING (17.04-MM THK)  
  202-9635 B [1] RING (16.56-MM THK)  
  202-9636 B [1] RING (16.62-MM THK)  
  202-9637 B [1] RING (16.64-MM THK)  
  202-9643 B [1] RING (16.68-MM THK)  
  202-9644 B [1] RING (16.72-MM THK)  
  202-9669 B [1] RING (16.74-MM THK)  
  202-9670 B [1] RING (16.76-MM THK)  
  202-9671 B [1] RING (16.78-MM THK)  
  202-9672 B [1] RING (16.82-MM THK)  
  202-9673 B [1] RING (16.84-MM THK)  
  202-9679 B [1] RING (16.88-MM THK)  
  202-9680 B [1] RING (16.9-MM THK)  
  202-9681 B [1] RING (16.94-MM THK)  
  193-1454 B [1] RING (16.66-MM THK)  
  193-1455 B [1] RING (16.96-MM THK)  
  193-1458 B [1] RING (17-MM THK)  
  193-1460 B [1] RING (17.02-MM THK)  
  193-1461 B [1] RING (17.06-MM THK)  
  193-1462 B [1] RING (17.08-MM THK)  
  193-1463 B [1] RING (17.12-MM THK)  
  193-1464 B [1] RING (17.14-MM THK)  
  193-1465 B [1] RING (17.16-MM THK)  
  193-1466 B [1] RING (17.18-MM THK)  
  193-1467 B [1] RING (17.22-MM THK)  
  193-1469 B [1] RING (17.24-MM THK)  
  193-1470 B [1] RING (17.26-MM THK)  
  193-1471 B [1] RING (17.28-MM THK)  
75. 269-2407 [1] BEARING-ROLLER  
76. 269-2408 [1] SEAL-RING  
77. 8U-2506 [1] WASHER (30.5X55.5X6-MM THK)  
78. 110-0848 M [1] NUT (M30X1.5-THD)  
79. 331-1387 [1] FLANGE-DRIVE  
80. 331-1388 [1] PLATE-DEFLECTOR  
81. 331-1401 [2] WASHER-THRUST  
82. 366-0492 C [2] GEAR-DIFFERENTIAL  
83. 366-0493 C [4] GEAR-DIFFERENTIAL  
84. 331-1404 [4] WASHER-THRUST  
85. 333-8013 [1] CASE-DIFFERENTIAL  
86. 331-1407 [1] SPIDER  
87. 7X-2436 M [16] BOLT (M12X1.75X100-MM)  
88. 6V-8200 M [4] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
89. 110-0181 B [2] RING (2-MM THK)  
  110-0182 B [2] RING (1.95-MM THK)  
  110-0183 B [2] RING (1.9-MM THK)  
  110-0184 B [2] RING (1.85-MM THK)  
  098-2962 B [2] SHIM (1.8-MM THK)  
  098-2960 B [2] SHIM (1.6-MM THK)  
  098-2959 B [2] SHIM (1.5-MM THK)  
  098-2958 B [2] SHIM (1.4-MM THK)  
  098-2957 B [2] SHIM (1.3-MM THK)  
  110-0191 B [2] RING (1.25-MM THK)  
  6T-8668 B [2] SHIM (1.2-MM THK)  
  110-0192 B [2] RING (1.15-MM THK)  
  6T-8669 B [2] SHIM (1.1-MM THK)  
  110-0193 B [2] RING (1.05-MM THK)  
  6T-8670 B [2] SHIM (1-MM THK)  
  110-0194 B [2] RING (0.95-MM THK)  
  110-0195 B [2] RING (0.9-MM THK)  
  110-0167 B [2] WASHER (90X99.8X0.85-MM THK)  
  6T-8671 B [2] SHIM (0.8-MM THK)  
  110-0168 B [2] WASHER (90X99.8X0.75-MM THK)  
  6T-8672 B [2] SHIM (0.7-MM THK)  
  110-0169 B [2] WASHER (90X99.8X0.65-MM THK)  
  6T-8673 B [2] SHIM (0.6-MM THK)  
  6T-8674 B [2] SHIM (0.5-MM THK)  
  110-0177 B [2] WASHER (90X99.8X0.45-MM THK)  
  6T-8675 B [2] SHIM (0.4-MM THK)  
  110-0178 B [2] WASHER (90X99.8X0.35-MM THK)  
  110-0180 B [2] WASHER (90X99.8X0.3-MM THK)  
  193-1125 B [2] SHIM (0.1-MM THK)  
  193-1127 B [2] SHIM (0.15-MM THK)  
119. 8U-2306 [1] BEARING  
120. 110-2463 [1] BEARING-ROLLER  
121. 270-4969 [2] SEAL-O-RING  
122. 336-7380 M [36] BOLT (M18X2.5X65-MM)  
124. 263-3629 [3] PLUG AS  
    (EACH INCLUDES)
  203-0215 [1] SEAL-O-RING  
125. 203-0215 [1] SEAL-O-RING  
126. 263-3630 [1] PLUG AS-MAGNET (AXLE)  
128. 333-8003 [2] HOUSING-AXLE  
129. 333-8004 [1] HOUSING  
130. 220-2593 [4] BUSHING-SLEEVE  
131. 333-8005 [4] SEAL-RING  
132. 173-8253 [2] SLEEVE  
133. 372-3535 Y [2] UNIVERSAL JOINT GP  
134. 269-2415 Y [1] TIE ROD GP (LH)  
135. 269-2416 Y [1] TIE ROD GP (RH)  
136. 271-5030 M [2] LOCKNUT (M30X1.5-THD)  
137. 333-8018 [1] HOUSING GP-AXLE (LH)  
138. 333-8019 [1] HOUSING GP-AXLE (RH)  
    (EACH HOUSING GP INCLUDES)
  243-0378 [1] NUT  
139. 333-8048 C [5] BEARING-TAPERED ROLLER  
140. 5W-1833 [4] CAP  
141. 5W-1855 [4] SEAL-O-RING  
142. 333-8025 [2] TRUNNION  
143. 5W-2998 [4] FITTING-GREASE  
144. 135-3437 [4] SEAL-O-RING  
145. 8T-6430 M [16] BOLT (M20X2.5X50-MM)  
146. 333-8026 [2] TRUNNION  
148. 243-0917 [2] WASHER-THRUST  
149. 243-0918 [2] WASHER-THRUST  
150. 110-0846 [2] RING-RETAINING  
151. 5W-5682 [2] VALVE AS-PURGE (AXLE)  
152. 8U-2354 B [2] SHIM (6-MM THK)  
  5W-6405 B [2] SHIM (6.5-MM THK)  
  5W-7644 B [2] SHIM (4-MM THK)  
  5W-7642 B [2] SHIM (5-MM THK)  
  5W-7641 B [2] SHIM (5.5-MM THK)  
  5W-7643 B [2] SHIM (4.5-MM THK)  
  128-1733 B [2] SHIM (2-MM THK)  
  128-1734 B [2] SHIM (3-MM THK)  
  5W-6408 B [2] WASHER (18.5X35X8-MM THK)  
  202-8145 B [2] WASHER (18.5X35X9-MM THK)  
  202-8149 B [2] WASHER (18.5X35X14-MM THK)  
163. 5W-2173 M [4] BOLT (M18X2.5X40-MM)  
164. 241-8122 M [2] NUT (M18X2.5-THD)  
165. 278-7552 Y [1] CYLINDER GP-STEERING  
166. 6V-3823 M [6] BOLT (M12X1.75X60-MM)  
167. 269-2430 [2] RING  
168. 121-8167 [2] BEARING-ROLLER  
169. 269-2431 [2] BEARING-ROLLER  
170. 333-8030 [2] HUB-FLANGE  
171. 7X-5762 [2] SEAL-O-RING  
172. 263-3701 [2] GEAR-CARRIER  
173. 320-9728 [4] SEAL-O-RING  
174. 320-9731 [2] SEAL-O-RING  
175. 298-2314 [2] GEAR-INTERNAL  
176. 328-8804 [2] PISTON  
177. 263-4057 [8] DOWEL  
178. 355-2319 [2] SEAL  
179. 238-3303 [2] RING (2-MM THK)  
180. 8U-0754 [2] SEAL  
181. 238-3304 [2] RING (2-MM THK)  
182. 8U-3592 [16] SPRING  
183. 238-3305 [16] SPRING  
184. 298-2315 [16] BOLT-SPECIAL  
185. 8U-3591 [16] SPACER (6.5X15X7-MM THK)  
186. 263-3704 [14] DISC-CLUTCH (4.5-MM THK)  
187. 238-3309 B [14] DISC-CLUTCH (2.5-MM THK)  
188. 238-3307 B [2] DISC-CLUTCH (2-MM THK)  
  238-3308 B [2] DISC-CLUTCH (3-MM THK)  
190. 375-1360 [2] WASHER-THRUST (10X40.2X5.1-MM THK)  
191. 375-8264 [2] CAGE-PINION  
192. 375-1359 [6] GEAR-PLANETARY  
194. 110-4737 [6] RING-RETAINING  
195. 6V-3668 M [4] BOLT (M12X1.75X30-MM)  
196. 243-5336 CM [2] BOLT (M10X1.5X20-MM)  
197. 333-8037 [20] STUD-WHEEL  
198. 366-0494 C [2] RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43420188
 

331-1405: AXLE GP-STEERING

331-1405 AXLE GP-STEERING
S/N H2E1-99999
PART OF 241-7439 AXLE AR-FRONT
Type 3
AN ATTACHMENT
i05067571 SEBP4342
3311405 AXLE GP-STEERING Parts scheme 3311405 AXLE GP-STEERING Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 372-4118 [1] GEAR-CROWN  
2. 269-2406 [1] PINION  
3. 110-0124 B [1] SHIM (2-MM THK)  
  110-0122 B [1] SHIM (1.8-MM THK)  
  110-0121 B [1] SHIM (1.5-MM THK)  
  110-0120 B [1] SHIM (1.2-MM THK)  
  129-9912 B [1] SHIM (1.9-MM THK)  
  129-9913 B [1] SHIM (1.7-MM THK)  
  129-9914 B [1] SHIM (1.6-MM THK)  
  129-9915 B [1] SHIM (1.4-MM THK)  
  129-9916 B [1] SHIM (1.3-MM THK)  
  190-8567 B [1] SHIM (1-MM THK)  
  190-8566 B [1] SHIM (0.9-MM THK)  
  190-8565 B [1] SHIM (0.8-MM THK)  
  190-8563 B [1] SHIM (0.7-MM THK)  
  190-8561 B [1] SHIM (0.6-MM THK)  
  5W-2074 B [1] SHIM (0.5-MM THK)  
  5W-2073 B [1] SHIM (0.3-MM THK)  
  5W-3644 B [1] SHIM (0.2-MM THK)  
  5W-2072 B [1] SHIM (0.1-MM THK)  
  193-1123 B [1] SHIM (0.75-MM THK)  
  193-1124 B [1] SHIM (0.65-MM THK)  
  331-1378 B [1] SHIM (1.25-MM THK)  
  331-1379 B [1] SHIM (1.35-MM THK)  
  331-1381 B [1] SHIM (1.45-MM THK)  
  331-1382 B [1] SHIM (1.55-MM THK)  
  331-1383 B [1] SHIM (1.65-MM THK)  
  331-1384 B [1] SHIM (1.75-MM THK)  
  331-1386 B [1] SHIM (1.85-MM THK)  
31. 110-0158 B [1] RING (16-MM THK)  
  110-0157 B [1] RING (16.1-MM THK)  
  110-0156 B [1] RING (16.2-MM THK)  
  110-0155 B [1] RING (16.3-MM THK)  
  110-0154 B [1] RING (16.4-MM THK)  
  110-0153 B [1] RING (16.5-MM THK)  
  110-0152 B [1] RING (16.6-MM THK)  
  110-0151 B [1] RING (16.7-MM THK)  
  110-0150 B [1] RING (16.8-MM THK)  
  110-0146 B [1] RING (16.92-MM THK)  
  110-0140 B [1] RING (17.1-MM THK)  
  110-0139 B [1] RING (17.2-MM THK)  
  110-0138 B [1] RING (17.3-MM THK)  
  110-0137 B [1] RING (17.4-MM THK)  
  110-0148 B [1] RING (16.86-MM THK)  
  110-0144 B [1] RING (16.98-MM THK)  
  110-0142 B [1] RING (17.04-MM THK)  
  202-9635 B [1] RING (16.56-MM THK)  
  202-9636 B [1] RING (16.62-MM THK)  
  202-9637 B [1] RING (16.64-MM THK)  
  202-9643 B [1] RING (16.68-MM THK)  
  202-9644 B [1] RING (16.72-MM THK)  
  202-9669 B [1] RING (16.74-MM THK)  
  202-9670 B [1] RING (16.76-MM THK)  
  202-9671 B [1] RING (16.78-MM THK)  
  202-9672 B [1] RING (16.82-MM THK)  
  202-9673 B [1] RING (16.84-MM THK)  
  202-9679 B [1] RING (16.88-MM THK)  
  202-9680 B [1] RING (16.9-MM THK)  
  202-9681 B [1] RING (16.94-MM THK)  
  193-1454 B [1] RING (16.66-MM THK)  
  193-1455 B [1] RING (16.96-MM THK)  
  193-1458 B [1] RING (17-MM THK)  
  193-1460 B [1] RING (17.02-MM THK)  
  193-1461 B [1] RING (17.06-MM THK)  
  193-1462 B [1] RING (17.08-MM THK)  
  193-1463 B [1] RING (17.12-MM THK)  
  193-1464 B [1] RING (17.14-MM THK)  
  193-1465 B [1] RING (17.16-MM THK)  
  193-1466 B [1] RING (17.18-MM THK)  
  193-1467 B [1] RING (17.22-MM THK)  
  193-1469 B [1] RING (17.24-MM THK)  
  193-1470 B [1] RING (17.26-MM THK)  
  193-1471 B [1] RING (17.28-MM THK)  
75. 269-2407 [1] BEARING-ROLLER  
76. 269-2408 [1] SEAL-RING  
77. 8U-2506 [1] WASHER (30.5X55.5X6-MM THK)  
78. 110-0848 M [1] NUT (M30X1.5-THD)  
79. 331-1387 [1] FLANGE-DRIVE  
80. 331-1388 [1] PLATE-DEFLECTOR  
81. 331-1401 [2] WASHER-THRUST  
82. 366-0492 [2] GEAR-DIFFERENTIAL  
83. 366-0493 [4] GEAR-DIFFERENTIAL  
84. 331-1404 [4] WASHER-THRUST  
85. 333-8013 [1] CASE-DIFFERENTIAL  
86. 331-1407 [1] SPIDER  
87. 7X-2436 M [16] BOLT (M12X1.75X100-MM)  
88. 6V-8200 M [4] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
89. 110-0181 B [2] RING (2-MM THK)  
  110-0182 B [2] RING (1.95-MM THK)  
  110-0183 B [2] RING (1.9-MM THK)  
  110-0184 B [2] RING (1.85-MM THK)  
  098-2962 B [2] SHIM (1.8-MM THK)  
  098-2960 B [2] SHIM (1.6-MM THK)  
  098-2959 B [2] SHIM (1.5-MM THK)  
  098-2958 B [2] SHIM (1.4-MM THK)  
  098-2957 B [2] SHIM (1.3-MM THK)  
  110-0191 B [2] RING (1.25-MM THK)  
  6T-8668 B [2] SHIM (1.2-MM THK)  
  110-0192 B [2] RING (1.15-MM THK)  
  6T-8669 B [2] SHIM (1.1-MM THK)  
  110-0193 B [2] RING (1.05-MM THK)  
  6T-8670 B [2] SHIM (1-MM THK)  
  110-0194 B [2] RING (0.95-MM THK)  
  110-0195 B [2] RING (0.9-MM THK)  
  110-0167 B [2] WASHER (90X99.8X0.85-MM THK)  
  6T-8671 B [2] SHIM (0.8-MM THK)  
  110-0168 B [2] WASHER (90X99.8X0.75-MM THK)  
  6T-8672 B [2] SHIM (0.7-MM THK)  
  110-0169 B [2] WASHER (90X99.8X0.65-MM THK)  
  6T-8673 B [2] SHIM (0.6-MM THK)  
  6T-8674 B [2] SHIM (0.5-MM THK)  
  110-0177 B [2] WASHER (90X99.8X0.45-MM THK)  
  6T-8675 B [2] SHIM (0.4-MM THK)  
  110-0178 B [2] WASHER (90X99.8X0.35-MM THK)  
  110-0180 B [2] WASHER (90X99.8X0.3-MM THK)  
  193-1125 B [2] SHIM (0.1-MM THK)  
  193-1127 B [2] SHIM (0.15-MM THK)  
119. 8U-2306 [1] BEARING  
120. 110-2463 [1] BEARING-ROLLER  
121. 270-4969 [2] SEAL-O-RING  
122. 336-7380 M [36] BOLT (M18X2.5X65-MM)  
124. 263-3629 [3] PLUG AS  
    (EACH INCLUDES)
  203-0215 [1] SEAL-O-RING  
125. 203-0215 [1] SEAL-O-RING  
126. 263-3630 [1] PLUG AS-MAGNET (AXLE)  
128. 333-8003 [2] HOUSING-AXLE  
129. 333-8004 [1] HOUSING  
130. 220-2593 [4] BUSHING-SLEEVE  
131. 333-8005 [4] SEAL-RING  
132. 173-8253 [2] SLEEVE  
133. 372-3535 Y [2] UNIVERSAL JOINT GP  
134. 269-2415 Y [1] TIE ROD GP (LH)  
135. 269-2416 Y [1] TIE ROD GP (RH)  
136. 271-5030 M [2] LOCKNUT (M30X1.5-THD)  
137. 333-8018 [1] HOUSING GP-AXLE (LH)  
138. 333-8019 [1] HOUSING GP-AXLE (RH)  
    (EACH HOUSING GP INCLUDES)
  243-0378 [1] NUT  
139. 333-8048 [5] BEARING-TAPERED ROLLER  
140. 5W-1833 [4] CAP  
141. 5W-1855 [4] SEAL-O-RING  
142. 333-8025 [2] TRUNNION  
143. 5W-2998 [4] FITTING-GREASE  
144. 135-3437 [4] SEAL-O-RING  
145. 8T-6430 M [16] BOLT (M20X2.5X50-MM)  
146. 333-8026 [2] TRUNNION  
148. 243-0917 [2] WASHER-THRUST  
149. 243-0918 [2] WASHER-THRUST  
150. 110-0846 [2] RING-RETAINING  
151. 5W-5682 [2] VALVE AS-PURGE (AXLE)  
152. 8U-2354 B [2] SHIM (6-MM THK)  
  5W-6405 B [2] SHIM (6.5-MM THK)  
  5W-7644 B [2] SHIM (4-MM THK)  
  5W-7642 B [2] SHIM (5-MM THK)  
  5W-7641 B [2] SHIM (5.5-MM THK)  
  5W-7643 B [2] SHIM (4.5-MM THK)  
  128-1733 B [2] SHIM (2-MM THK)  
  128-1734 B [2] SHIM (3-MM THK)  
  5W-6408 B [2] WASHER (18.5X35X8-MM THK)  
  202-8145 B [2] WASHER (18.5X35X9-MM THK)  
  202-8149 B [2] WASHER (18.5X35X14-MM THK)  
163. 5W-2173 M [4] BOLT (M18X2.5X40-MM)  
164. 241-8122 M [2] NUT (M18X2.5-THD)  
165. 375-1286 CY [1] CYLINDER GP-HYDRAULIC  
166. 6V-3823 M [6] BOLT (M12X1.75X60-MM)  
167. 269-2430 [2] RING  
168. 121-8167 [2] BEARING-ROLLER  
169. 269-2431 [2] BEARING-ROLLER  
170. 333-8030 [2] HUB-FLANGE  
171. 7X-5762 [2] SEAL-O-RING  
172. 263-3701 [2] GEAR-CARRIER  
173. 320-9728 [4] SEAL-O-RING  
174. 320-9731 [2] SEAL-O-RING  
175. 298-2314 [2] GEAR-INTERNAL  
176. 328-8804 [2] PISTON  
177. 263-4057 [8] DOWEL  
178. 355-2319 [2] SEAL  
179. 238-3303 [2] RING (2-MM THK)  
180. 8U-0754 [2] SEAL  
181. 238-3304 [2] RING (2-MM THK)  
182. 8U-3592 [16] SPRING  
183. 238-3305 [16] SPRING  
184. 298-2315 [16] BOLT-SPECIAL  
185. 8U-3591 [16] SPACER (6.5X15X7-MM THK)  
186. 263-3704 [14] DISC-CLUTCH (4.5-MM THK)  
187. 238-3309 B [14] DISC-CLUTCH (2.5-MM THK)  
188. 238-3307 B [2] DISC-CLUTCH (2-MM THK)  
  238-3308 B [2] DISC-CLUTCH (3-MM THK)  
190. 375-1360 [2] WASHER-THRUST (10X40.2X5.1-MM THK)  
191. 375-8264 [2] CAGE-PINION  
192. 375-1359 [6] GEAR-PLANETARY  
194. 110-4737 [6] RING-RETAINING  
195. 6V-3668 M [4] BOLT (M12X1.75X30-MM)  
196. 243-5336 M [2] BOLT (M10X1.5X20-MM)  
197. 333-8037 [20] STUD-WHEEL  
198. 366-0494 [2] RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43420189
 

331-1405: AXLE GP-STEERING

331-1405 AXLE GP-STEERING
S/N H2E1-99999
PART OF 241-7439 AXLE AR-FRONT
Type 4
AN ATTACHMENT
i05067630 SEBP4342
3311405 AXLE GP-STEERING Parts scheme 3311405 AXLE GP-STEERING Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 372-4118 [1] GEAR-CROWN  
2. 372-4121 [1] PINION  
3. 110-0124 B [1] SHIM (2-MM THK)  
  110-0122 B [1] SHIM (1.8-MM THK)  
  110-0121 B [1] SHIM (1.5-MM THK)  
  110-0120 B [1] SHIM (1.2-MM THK)  
  129-9912 B [1] SHIM (1.9-MM THK)  
  129-9913 B [1] SHIM (1.7-MM THK)  
  129-9914 B [1] SHIM (1.6-MM THK)  
  129-9915 B [1] SHIM (1.4-MM THK)  
  129-9916 B [1] SHIM (1.3-MM THK)  
  190-8567 B [1] SHIM (1-MM THK)  
  190-8566 B [1] SHIM (0.9-MM THK)  
  190-8565 B [1] SHIM (0.8-MM THK)  
  190-8563 B [1] SHIM (0.7-MM THK)  
  190-8561 B [1] SHIM (0.6-MM THK)  
  5W-2074 B [1] SHIM (0.5-MM THK)  
  5W-2073 B [1] SHIM (0.3-MM THK)  
  5W-3644 B [1] SHIM (0.2-MM THK)  
  5W-2072 B [1] SHIM (0.1-MM THK)  
  193-1123 B [1] SHIM (0.75-MM THK)  
  193-1124 B [1] SHIM (0.65-MM THK)  
  331-1378 B [1] SHIM (1.25-MM THK)  
  331-1379 B [1] SHIM (1.35-MM THK)  
  331-1381 B [1] SHIM (1.45-MM THK)  
  331-1382 B [1] SHIM (1.55-MM THK)  
  331-1383 B [1] SHIM (1.65-MM THK)  
  331-1384 B [1] SHIM (1.75-MM THK)  
  331-1386 B [1] SHIM (1.85-MM THK)  
31. 110-0158 B [1] RING (16-MM THK)  
  490-0441 B [1] RING (16.1-MM THK)  
  110-0156 B [1] RING (16.2-MM THK)  
  110-0155 B [1] RING (16.3-MM THK)  
  110-0154 B [1] RING (16.4-MM THK)  
  110-0153 B [1] RING (16.5-MM THK)  
  110-0152 B [1] RING (16.6-MM THK)  
  110-0151 B [1] RING (16.7-MM THK)  
  490-0458 B [1] RING (16.8-MM THK)  
  110-0146 B [1] RING (16.92-MM THK)  
  110-0139 B [1] RING (17.2-MM THK)  
  490-7393 B [1] RING (17.3-MM THK)  
  490-7394 B [1] RING (17.4-MM THK)  
  420-6082 B [1] RING (16.9-MM THK)  
  110-0144 B [1] RING (16.98-MM THK)  
  437-1494 B [1] RING (17.04-MM THK)  
  202-9635 B [1] RING (16.56-MM THK)  
  202-9636 B [1] RING (16.62-MM THK)  
  202-9637 B [1] RING (16.64-MM THK)  
  202-9643 B [1] RING (16.68-MM THK)  
  202-9644 B [1] RING (16.72-MM THK)  
  202-9669 B [1] RING (16.74-MM THK)  
  202-9670 B [1] RING (16.76-MM THK)  
  202-9671 B [1] RING (16.78-MM THK)  
  202-9672 B [1] RING (16.82-MM THK)  
  202-9673 B [1] RING (16.84-MM THK)  
  202-9679 B [1] RING (16.88-MM THK)  
  202-9680 B [2] RING (16.9-MM THK)  
  202-9681 B [1] RING (16.94-MM THK)  
  193-1454 B [1] RING (16.66-MM THK)  
  490-7374 B [1] RING (16.96-MM THK)  
  490-0443 B [1] RING (16.3-MM THK)  
  193-1460 B [1] RING (17.02-MM THK)  
  473-6651 B [1] RING (17.06-MM THK)  
  193-1462 B [1] RING (17.08-MM THK)  
  193-1463 B [1] RING (17.12-MM THK)  
  193-1464 B [1] RING (17.14-MM THK)  
  193-1465 B [1] RING (17.16-MM THK)  
  193-1466 B [1] RING (17.18-MM THK)  
  193-1467 B [1] RING (17.22-MM THK)  
  193-1469 B [1] RING (17.24-MM THK)  
  193-1470 B [1] RING (17.26-MM THK)  
  193-1471 B [1] RING (17.28-MM THK)  
75. 269-2407 [1] BEARING-ROLLER  
76. 418-8616 [1] SEAL-LIP TYPE  
77. 8U-2506 [1] WASHER (30.5X55.5X6-MM THK)  
78. 110-0848 M [1] NUT (M30X1.5-THD)  
79. 417-6660 [1] FLANGE-DRIVE  
80. 331-1388 [1] PLATE-DEFLECTOR  
81. 331-1401 [2] WASHER-THRUST  
82. 366-0492 [2] GEAR-DIFFERENTIAL  
83. 366-0493 [4] GEAR-DIFFERENTIAL  
84. 331-1404 [4] WASHER-THRUST  
85. 333-8013 [1] CASE-DIFFERENTIAL  
86. 331-1407 [1] SPIDER  
87. 7X-2436 M [16] BOLT (M12X1.75X100-MM)  
88. 6V-8200 M [4] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
89. 110-0181 B [2] RING (2-MM THK)  
  110-0182 B [2] RING (1.95-MM THK)  
  110-0183 B [2] RING (1.9-MM THK)  
  110-0184 B [2] RING (1.85-MM THK)  
  098-2962 B [2] SHIM (1.8-MM THK)  
  098-2960 B [2] SHIM (1.6-MM THK)  
  098-2959 B [2] SHIM (1.5-MM THK)  
  098-2958 B [2] SHIM (1.4-MM THK)  
  098-2957 B [2] SHIM (1.3-MM THK)  
  110-0191 B [2] RING (1.25-MM THK)  
  6T-8668 B [2] SHIM (1.2-MM THK)  
  110-0192 B [2] RING (1.15-MM THK)  
  6T-8669 B [2] SHIM (1.1-MM THK)  
  110-0193 B [2] RING (1.05-MM THK)  
  6T-8670 B [2] SHIM (1-MM THK)  
  110-0194 B [2] RING (0.95-MM THK)  
  110-0195 B [2] RING (0.9-MM THK)  
  110-0167 B [2] WASHER (90X99.8X0.85-MM THK)  
  6T-8671 B [2] SHIM (0.8-MM THK)  
  110-0168 B [2] WASHER (90X99.8X0.75-MM THK)  
  6T-8672 B [2] SHIM (0.7-MM THK)  
  110-0169 B [2] WASHER (90X99.8X0.65-MM THK)  
  6T-8673 B [2] SHIM (0.6-MM THK)  
  6T-8674 B [2] SHIM (0.5-MM THK)  
  110-0177 B [2] WASHER (90X99.8X0.45-MM THK)  
  6T-8675 B [2] SHIM (0.4-MM THK)  
  110-0178 B [2] WASHER (90X99.8X0.35-MM THK)  
  110-0180 B [2] WASHER (90X99.8X0.3-MM THK)  
  193-1125 B [2] SHIM (0.1-MM THK)  
  193-1127 B [2] SHIM (0.15-MM THK)  
119. 8U-2306 [1] BEARING  
120. 110-2463 [1] BEARING-ROLLER  
121. 270-4969 [2] SEAL-O-RING  
122. 336-7380 M [36] BOLT (M18X2.5X65-MM)  
124. 263-3629 [3] PLUG AS  
    (EACH INCLUDES)
  203-0215 [1] SEAL-O-RING  
125. 203-0215 [1] SEAL-O-RING  
126. 263-3630 [1] PLUG AS-MAGNET (AXLE)  
128. 333-8003 [2] HOUSING-AXLE  
129. 333-8004 [1] HOUSING  
130. 220-2593 [4] BUSHING-SLEEVE  
131. 333-8005 [4] SEAL-RING  
132. 173-8253 [2] SLEEVE  
133. 372-3535 Y [2] UNIVERSAL JOINT GP  
134. 340-5790 CY [1] TIE ROD GP (LH)  
135. 340-5791 CY [1] TIE ROD GP (RH)  
136. 271-5030 M [2] LOCKNUT (M30X1.5-THD)  
137. 333-8018 [1] HOUSING GP-AXLE (LH)  
138. 333-8019 [1] HOUSING GP-AXLE (RH)  
    (EACH HOUSING GP INCLUDES)
  243-0378 [1] NUT  
139. 333-8048 [5] BEARING-TAPERED ROLLER  
140. 5W-1833 [4] CAP  
141. 5W-1855 [4] SEAL-O-RING  
142. 333-8025 [2] TRUNNION  
143. 5W-2998 [4] FITTING-GREASE  
144. 135-3437 [4] SEAL-O-RING  
145. 8T-6430 M [16] BOLT (M20X2.5X50-MM)  
146. 333-8026 [2] TRUNNION  
148. 243-0917 [2] WASHER-THRUST  
149. 243-0918 [2] WASHER-THRUST  
150. 110-0846 [2] RING-RETAINING  
151. 5W-5682 [2] VALVE AS-PURGE (AXLE)  
152. 8U-2354 B [2] SHIM (6-MM THK)  
  5W-6405 B [2] SHIM (6.5-MM THK)  
  5W-7644 B [2] SHIM (4-MM THK)  
  5W-7642 B [2] SHIM (5-MM THK)  
  5W-7641 B [2] SHIM (5.5-MM THK)  
  5W-7643 B [2] SHIM (4.5-MM THK)  
  128-1733 B [2] SHIM (2-MM THK)  
  128-1734 B [2] SHIM (3-MM THK)  
  5W-6408 B [2] WASHER (18.5X35X8-MM THK)  
  202-8145 B [2] WASHER (18.5X35X9-MM THK)  
  202-8149 B [2] WASHER (18.5X35X14-MM THK)  
163. 5W-2173 M [4] BOLT (M18X2.5X40-MM)  
164. 241-8122 M [2] NUT (M18X2.5-THD)  
165. 375-1286 Y [1] CYLINDER GP-HYDRAULIC  
166. 6V-3823 M [6] BOLT (M12X1.75X60-MM)  
167. 269-2430 [2] RING  
168. 121-8167 [2] BEARING-ROLLER  
169. 269-2431 [2] BEARING-ROLLER  
170. 333-8030 [2] HUB-FLANGE  
171. 7X-5762 [2] SEAL-O-RING  
172. 263-3701 [2] GEAR-CARRIER  
173. 320-9728 [4] SEAL-O-RING  
174. 320-9731 [2] SEAL-O-RING  
175. 298-2314 [2] GEAR-INTERNAL  
176. 328-8804 [2] PISTON  
177. 263-4057 [8] DOWEL  
178. 355-2319 [2] SEAL  
179. 238-3303 [2] RING (2-MM THK)  
180. 8U-0754 [2] SEAL  
181. 238-3304 [2] RING (2-MM THK)  
182. 8U-3592 [16] SPRING  
183. 238-3305 [16] SPRING  
184. 298-2315 [16] BOLT-SPECIAL  
185. 8U-3591 [16] SPACER (6.5X15X7-MM THK)  
186. 263-3704 [14] DISC-CLUTCH (4.5-MM THK)  
187. 238-3309 B [14] DISC-CLUTCH (2.5-MM THK)  
188. 238-3307 B [2] DISC-CLUTCH (2-MM THK)  
  238-3308 B [2] DISC-CLUTCH (3-MM THK)  
190. 375-1360 [2] WASHER-THRUST (10X40.2X5.1-MM THK)  
191. 375-8264 [2] CAGE-PINION  
192. 375-1359 [6] GEAR-PLANETARY  
194. 110-4737 [6] RING-RETAINING  
195. 6V-3668 M [4] BOLT (M12X1.75X30-MM)  
196. 243-5336 M [2] BOLT (M10X1.5X20-MM)  
197. 333-8037 [20] STUD-WHEEL  
198. 366-0494 [2] RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29

Caterpillar Parts SIS Catalog M322C :

AXLE AR-FRONT
241-7439 AXLE AR-FRONT
AXLE AR-FRONT
241-7439 AXLE AR-FRONT
AXLE & TRANSMISSION AR
331-1410 AXLE & TRANSMISSION AR
AXLE & TRANSMISSION AR
331-1410 AXLE & TRANSMISSION AR
AXLE & TRANSMISSION AR
237-4545 AXLE & TRANSMISSION AR
AXLE & MTG AR-FRONT
241-7437 AXLE & MTG AR-FRONT
WIRING GP-WORK TOOL
241-8750 WIRING GP-WORK TOOL
WIRING GP-UNDERCARRIAGE/SWIVEL
242-5028 WIRING GP-UNDERCARRIAGE/SWIVEL
AXLE AR-REAR
241-7438 AXLE AR-REAR
AXLE AR-REAR
241-7440 AXLE AR-REAR
AXLE AR-REAR
241-7440 AXLE AR-REAR
AXLE GP-STEERING
237-4540 AXLE GP-STEERING
AXLE GP-STEERING
237-4540 AXLE GP-STEERING
AXLE GP-STEERING
331-1405 AXLE GP-STEERING
AXLE GP-STEERING
331-1405 AXLE GP-STEERING
AXLE GP-STEERING
331-1405 AXLE GP-STEERING

Truck sale:

2005 CAT M322C
USD $50,526 
2005 CAT M322C

d&h concrete services ltd
2004 CAT M322C
USD $39,000 
2004 CAT M322C

MILTON CAT
SYRACUSE, New York
2006 CAT M322C
USD $59,000 
2006 CAT M322C

BTM MACHINERY
Georgia
CATERPILLAR M322C 2004
$39,000 USD 
CATERPILLAR M322C 2004
- WHEEL EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
2004 CAT M322C
Call 
2004 CAT M322C

COFESER
Ponferrada, LEON, Spain 24400
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.