AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

207-0373 INSTALLATION AR-ENGINE S/N H2B1-99999 PART OF 186-0515 GENERAL AR M315C WHEELED EXCAVATOR


ENGINE ARRANGEMENT
ENGINE AR
BASIC ENGINE
CAMSHAFT GP
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP
CYLINDER HEAD GP

WHEELED EXCAVATOR M315C WHEELED EXCAVATOR H2B
 M315C Excavator H2B00001-UP (MACHINE) POWERED BY 3054E Engine SEBP4343 M315C H2B   (2003)

ENGINE ARRANGEMENT

ENGINE AR
188-5100 ENGINE AR-PRIMARY
207-0373 INSTALLATION AR-ENGINE
 

#SEBP43430010
 

207-0373: INSTALLATION AR-ENGINE

207-0373 INSTALLATION AR-ENGINE
S/N H2B1-99999
PART OF 186-0515 GENERAL AR
i02007140 SEBP4343
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  188-2811 Y [1] AFTERCOOLER GP-AIR  
  207-2145 Y [1] AIR CLEANER GP  
  186-0512 Y [1] COMPRESSOR GP-REFRIGERANT  
  198-4684 Y [1] CONDENSER & MTG GP-REFRIGERANT  
  198-4679 Y [1] DRAIN GP-OIL  
  188-2812 Y [1] FAN GP-SUCTION  
  186-0507 Y [1] FAN GP-SUCTION (ENGINE COOLANT, HYDRAULIC OIL)  
  238-7016 Y [1] GUARD GP-FAN  
  188-2813 Y [1] GUARD GP-FAN  
  207-0384 Y [1] LINES GP-AIR  
  207-0378 Y [1] LINES GP-COOLANT  
  186-0509 Y [1] MOTOR & MTG GP-HYDRAULIC FAN  
  207-0374 Y [1] MOUNTING GP-ENGINE FLEXIBLE  
  207-2146 Y [1] MUFFLER GP  
  186-0505 Y [1] RADIATOR GP  
  211-7985 Y [1] WIRING GP-FAN  
  Y   SEPARATE ILLUSTRATION
 

#SEBP43430011
 

234-2674: CAMSHAFT GP

234-2674 CAMSHAFT GP
S/N CRX1-99999
PART OF 188-5100 ENGINE AR-PRIMARY
i01889672 SEBP4343
2342674 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 350-1846 [1] CAMSHAFT AS  
1A. 1B-8736 [1] KEY-WOODRUFF  
 

#SEBP43430012
 

234-3593: COVER GP-VALVE MECHANISM

234-3593 COVER GP-VALVE MECHANISM
S/N CRX1-99999
PART OF 188-5100 ENGINE AR-PRIMARY
Type 1
i01889640 SEBP4343
2343593 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-3440 [6] CLAMP-HOSE  
2. 6I-0291 M [3] NUT (M8X1.25-THD)  
3. 6I-0846 M [3] BOLT (M6X1X14-MM)  
4. 100-4458 M [1] BOLT (M8X1.25X14-MM)  
5. 100-4838 M [2] BOLT (M6X1X20-MM)  
6. 101-3877 [3] STUD (M8X1.25X37-MM)  
7. 221-1139 [1] GASKET-FILLER  
8. 225-6522 [1] PLUG-CUP  
9. 226-8763 [1] COVER AS-VALVE  
9A. 225-6451 [1] GASKET (VALVE COVER)  
9B. 225-6455 [10] BOLT  
9C. 225-6456 [1] SPRING  
9D. 225-6461 [1] CAP  
9E. 225-6464 [1] DIAPHRAGM (CRANKCASE PRESSURE CONTACTOR)  
9F. 225-6477 [1] PLATE  
9G. 225-6478 [4] SCREW-MACHINE  
9H. 225-6479 [1] CAP  
10. 226-8768 [1] BREATHER GP (CRANKCASE)  
11. 230-3478 [1] FILLER AS-OIL (ENGINE)  
11A. 130-9888 [1] CAP AS-OIL FILLER (ENGINE)  
11B. 113-1504 [1] SEAL-O-RING  
12. 230-9127 [1] COVER  
13. 230-9144 [1] CONNECTOR  
13A. 150-7732 [1] SEAL-O-RING  
13B. 225-6455 [2] BOLT  
13C. 225-6517 [1] GASKET  
14. 234-3587 [1] HOSE-BREATHER (CRANKCASE)  
15. 234-3590 [1] TUBE AS  
16. 234-3591 [1] ELBOW-BREATHER  
17. 160-0149 [1] HOSE  
18. 237-8135 [1] VALVE GP-PRESSURE CONTROL (CRANKCASE BREATHER)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP43430013
 

234-3593: COVER GP-VALVE MECHANISM

234-3593 COVER GP-VALVE MECHANISM
S/N CRX1-99999
PART OF 188-5100 ENGINE AR-PRIMARY
Type 2
i02517451 SEBP4343
2343593 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-3440 [6] CLAMP-HOSE  
2. 6I-0291 M [3] NUT (M8X1.25-THD)  
3. 6I-0846 M [3] BOLT (M6X1X14-MM)  
4. 100-4458 M [1] BOLT (M8X1.25X14-MM)  
5. 100-4838 M [4] BOLT (M6X1X20-MM)  
6. 101-3877 [3] STUD (M8X1.25X37-MM)  
7. 221-1139 [1] GASKET-FILLER  
8. 225-6522 [1] PLUG-CUP  
9. 249-5230 [1] COVER AS-VALVE  
9A. 225-6451 [1] GASKET (VALVE COVER)  
9B. 225-6455 [10] BOLT  
9C. 225-6456 [1] SPRING  
9D. 225-6461 [1] CAP  
9E. 225-6464 [1] DIAPHRAGM (CRANKCASE PRESSURE CONTACTOR)  
9F. 225-6477 [1] PLATE  
9G. 225-6478 [4] SCREW-MACHINE  
9H. 225-6479 [1] CAP  
10. 226-8768 [1] BREATHER GP (CRANKCASE)  
11. 230-3478 [1] FILLER AS-OIL  
11A. 130-9888 [1] CAP AS-OIL FILLER (ENGINE)  
11B. 113-1504 [1] SEAL-O-RING  
12. 230-9127 [1] COVER  
13. 287-8573 [1] PIPE AS  
14. 234-3587 [1] HOSE-BREATHER (CRANKCASE)  
15. 234-3590 [1] TUBE AS  
16. 234-3591 [1] ELBOW-BREATHER  
17. 160-0149 [1] HOSE (BREATHER)  
18. 237-8135 [1] VALVE GP-PRESSURE CONTROL (CRANKCASE BREATHER)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP43430014
 

234-3593: COVER GP-VALVE MECHANISM

234-3593 COVER GP-VALVE MECHANISM
S/N CRX1-99999
PART OF 188-5100 ENGINE AR-PRIMARY
Type 3
i03161543 SEBP4343
2343593 COVER GP-VALVE MECHANISM Parts scheme 2343593 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-3440 [6] CLAMP-HOSE  
2. 6I-0291 M [3] NUT (M8X1.25-THD)  
3. 6I-0846 M [3] BOLT (M6X1X14-MM)  
4. 100-4458 M [1] BOLT (M8X1.25X14-MM)  
5. 100-4838 M [4] BOLT (M6X1X20-MM)  
6. 154-6015 [3] STUD  
7. 221-1139 [1] GASKET-FILLER  
8. 225-6522 [1] PLUG-CUP  
9. 308-1381 C [1] COVER GP-VALVE MECHANISM  
9A. 225-6451 [1] GASKET (VALVE COVER)  
9B. 225-6456 [1] SPRING  
9C. 225-6461 [1] CAP  
9D. 225-6464 [1] DIAPHRAGM (CRANKCASE PRESSURE CONTACTOR)  
9E. 225-6477 [1] PLATE  
9F. 225-6478 [4] SCREW-MACHINE  
9G. 225-6479 [1] CAP  
10. 226-8768 [1] BREATHER GP (CRANKCASE)  
10A. 308-4868 [1] SEAL-O-RING  
11. 341-2238 [1] FILLER AS-OIL  
11A. 130-9888 [1] CAP AS-OIL FILLER (ENGINE)  
11B. 113-1504 [1] SEAL-O-RING  
12. 230-9127 [1] COVER  
13. 287-8573 [1] PIPE AS  
14. 234-3587 [1] HOSE-BREATHER (CRANKCASE)  
15. 234-3590 [1] TUBE AS  
16. 234-3591 [1] ELBOW-BREATHER  
17. 160-0149 [1] HOSE (BREATHER)  
18. 237-8135 [1] VALVE GP-PRESSURE CONTROL (CRANKCASE BREATHER)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP43430015
 

234-2670: CRANKSHAFT GP

234-2670 CRANKSHAFT GP
S/N CRX1-99999
PART OF 188-5100 ENGINE AR-PRIMARY
i01889684 SEBP4343
2342670 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 216-8314 [1] GEAR-CRANKSHAFT (34-TEETH)  
2. 225-8841 [1] CRANKSHAFT GP  
3. 1B-8736 [1] KEY-WOODRUFF  
4. 032-9090 [2] WASHER-THRUST (STANDARD-UPPER)  
  067-6873 AB WASHER-THRUST (0.18-MM OS)  
5. 032-9091 [2] WASHER-THRUST (STANDARD-LOWER)  
  067-6874 AB WASHER-THRUST (0.18-MM OS)  
6. 225-7772 [1] BEARING SET-MAIN (STANDARD)  
  233-3784 AB KIT-CRANKSHAFT BEARING (0.25-MM US)  
  233-3785 AB KIT-CRANKSHAFT BEARING (0.50-MM US)  
  233-3786 AB KIT-CRANKSHAFT BEARING (0.75-MM US)  
7. 225-7781 [1] BEARING SET-ROD  
  233-3788 AB KIT-ROD BEARING (0.25-MM US)  
  233-3789 AB KIT-ROD BEARING (0.50-MM US)  
  AB KIT-ROD BEARING (0.75-MM US)  
8. 225-8839 [1] DOWEL  
9. 249-9227 [1] RING-TIMING  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP43430016
 

232-7604: CYLINDER BLOCK GP

232-7604 CYLINDER BLOCK GP
S/N CRX1-99999
PART OF 234-2669 CYLINDER BLOCK GP
i01887234 SEBP4343
2327604 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0572 M [4] BOLT (M8X1.25X20-MM)  
2. 035-8068 [10] BOLT (5/8-18X3.75-IN)  
3. 067-6002 [10] DOWEL  
4. 067-6006 [1] PLUG  
5. 067-6043 [1] PLUG-SIDE  
6. 100-4841 M [4] BOLT (M6X1X10-MM)  
7. 185-0884 [2] DOWEL  
8. 225-7944 [1] GASKET (ENGINE OIL FILTER BASE)  
9. 225-8858 [2] PLUG  
10. 232-3751 [1] PLATE  
11. 232-7440 [1] BEARING  
12. 276-5605 [4] JET AS-PISTON COOLING  
13. 232-7596 [1] PLUG  
14. 232-7597 [2] PLUG  
15. 232-7599 [1] PLUG  
16. 232-7600 [1] PLUG-CUP  
17. 232-7603 [1] PLUG  
  M   METRIC PART
 

#SEBP43430017
 

234-2669: CYLINDER BLOCK GP

234-2669 CYLINDER BLOCK GP
S/N CRX1-99999
PART OF 188-5100 ENGINE AR-PRIMARY
i01887213 SEBP4343
2342669 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 209-9219 M [10] BOLT (M8X1.25X16-MM)  
2. 232-7449 [1] HOUSING AS  
3. 232-7604 Y [1] CYLINDER BLOCK GP  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43430018
 

225-5505: CYLINDER HEAD GP

225-5505 CYLINDER HEAD GP
S/N CRX1-99999
PART OF 234-2672 CYLINDER HEAD GP
i01915720 SEBP4343
2255505 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-5015 [2] PLUG-FREEZE  
2. 067-6006 [4] PLUG  
3. 147-1979 [16] RETAINER-VALVE SPRING  
4. 185-0882 [8] GUIDE-VALVE (INTAKE)  
5. 185-0884 [2] DOWEL  
6. 329-6655 [4] INSERT-VALVE SEAT (INLET)  
7. 322-9663 [4] INSERT-VALVE SEAT (EXHAUST)  
8. 225-5495 [4] VALVE-INLET  
9. 436-0519 [8] SPRING-VALVE  
11. 225-5498 [8] CAP  
12. 225-5499 [4] VALVE-EXHAUST  
13. 252-6438 [4] SEAL-INLET VALVE  
14. 254-3954 [4] SEAL  
 

#SEBP43430019
 

234-2672: CYLINDER HEAD GP

234-2672 CYLINDER HEAD GP
S/N CRX1-99999
PART OF 188-5100 ENGINE AR-PRIMARY
i01889678 SEBP4343
2342672 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-5501 [7] BOLT (M15X1.5X137-MM)  
2. 225-5502 [3] BOLT (M15X1.5X162-MM)  
3. 258-4946 [1] GASKET-CYLINDER HEAD  
4. 225-5505 Y [1] CYLINDER HEAD GP  
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18
Engine News
Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Specifications
Engine Design
3054E Engine for Caterpillar Built Machines
Tool Operating Manual
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
Service Magazine
Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17
Responsibilities for Emission Certified Engines {1000}
2005/10/03
Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27
Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2009/11/18
Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/24

Caterpillar Parts SIS Catalog M315C :

188-5100 ENGINE AR-PRIMARY
243-2598 ROADING AR
227-2947 ROADING AR
ROADING AR
223-5782 ROADING AR
ROADING AR
223-5781 ROADING AR
ROADING AR
190-0283 ROADING AR
186-0515 GENERAL AR
243-4074 CONVERSION AR-MACHINE
CAMSHAFT GP
234-2674 CAMSHAFT GP
COVER GP-VALVE MECHANISM
234-3593 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
234-3593 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
234-3593 COVER GP-VALVE MECHANISM
CRANKSHAFT GP
234-2670 CRANKSHAFT GP
CYLINDER BLOCK GP
232-7604 CYLINDER BLOCK GP
CYLINDER BLOCK GP
234-2669 CYLINDER BLOCK GP
CYLINDER HEAD GP
225-5505 CYLINDER HEAD GP

Truck sale:

 
60,631 USD 
Caterpillar M315C, Construction
- wheel excavator
BERGERAT MONNOYEUR SP. Z O.O.
Poland
Caterpillar M315C, Construction
68,079 
Caterpillar M315C, Construction
- wheel excavator
BERGERAT MONNOYEUR SP. Z O.O.
Poland
Caterpillar M315C, Construction
On Request 
Caterpillar M315C, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Germany
 
$46,884 USD 
CATERPILLAR M315C 2006
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
CATERPILLAR M315C 2005
$39,068 USD 
CATERPILLAR M315C 2005
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.