AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

231-1837 WIRING GP-CONSOLE -RH S/N TAJ1-UP PART OF 231-1835 WIRING GP-CONSOLE 345C EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP

EXCAVATOR 345C EXCAVATOR TAJ
 345C Excavator TAJ00001-UP (MACHINE) POWERED BY C13 Engine SEBP4347 345C TAJ   (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
231-1835 WIRING GP-CONSOLE
WIRING GP-CONSOLE
231-1836 WIRING GP-CONSOLE
WIRING GP-CONSOLE
231-1837 WIRING GP-CONSOLE
WIRING GP-CONTROL
227-7140 WIRING GP-CONTROL
WIRING GP-CONVERTER
247-0899 WIRING GP-CONVERTER
WIRING GP-COUNTERWEIGHT
238-2120 WIRING GP-COUNTERWEIGHT
 

#SEBP43470310
 

231-1837: WIRING GP-CONSOLE

231-1837 WIRING GP-CONSOLE -RH
S/N TAJ1-UP
PART OF 231-1835 WIRING GP-CONSOLE
i02294063 SEBP4347
2311837 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 283-3074 [1] SWITCH AS-TOGGLE (AUTO/MANUAL ENG SPEED CONTROL)  
2. 163-6711 [1] SWITCH AS-TOGGLE (BACKUP TRAVEL, RH)  
3. 163-6795 [3] STRAP-CABLE  
4. 251-0602 C [1] BRACKET  
5. 251-0581 C [1] HARNESS AS-CONSOLE (RH)(RH CONSOLE)  
  7Y-3963 [2] TERMINAL-BULLET (FEMALE)  
  102-7965 [13] TERMINAL (FEMALE)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8074 [14] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  238-2363 [7] TERMINAL (FEMALE)  
  3S-2093 [9] STRAP-CABLE  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  247-2693 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4510 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  230-5008 [1] PLUG AS-CONNECTOR (4-PIN)  
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  239-7352 [1] PLUG AS-CONNECTOR (6-PIN)  
  231-2295 [1] PLUG AS-CONNECTOR (8-PIN)  
  230-4009 [1] PLUG AS-CONNECTOR (12-PIN)  
7. 9X-2042 M [3] SCREW-TRUSS HEAD (M6X1X12-MM)  
8. 3S-2093 C [2] STRAP-CABLE  
9. 7K-1181 C [1] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP43470311
 

227-7140: WIRING GP-CONTROL

227-7140 WIRING GP-CONTROL
S/N TAJ1-UP
PART OF 200-6732 CONTROL AR-AUXILIARY
AN ATTACHMENT
i02158828 SEBP4347
2277140 WIRING GP-CONTROL Parts scheme 2277140 WIRING GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [12] STRAP-CABLE  
2. 7K-1181 [18] STRAP-CABLE  
3. 149-5050 [1] RELAY (24-VOLT)(THUMB OPEN)  
3A. 149-5050 [1] RELAY (24-VOLT)(THUMB CLOSE)  
4. 306-8717 [1] HARNESS AS-CHASSIS  
5. 238-2437 [1] HARNESS AS-CONTROL (THUMB)  
  3S-2093 [8] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  125-7875 BE TUBE-HEAT SHRINK (7.44-MM DIA)  
  243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
6. 132-5789 [3] CLIP (LADDER)  
7. 5C-2890 M [2] NUT (M6X1-THD)  
8. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
10. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
11. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
12. 4I-7889 [1] SPACER (11X25X45-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP43470312
 

247-0899: WIRING GP-CONVERTER

247-0899 WIRING GP-CONVERTER
S/N TAJ1-UP
12-VOLT - 10-AMP POWER SUPPLY
AN ATTACHMENT
i02158630 SEBP4347
2470899 WIRING GP-CONVERTER Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-0987 [2] SOCKET-AUXILIARY POWER (12-VOLT, 7-AMPERE)  
2. 209-0381 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
3. 7Y-3173 M [6] SCREW-BUTTON HEAD (M4X0.7X12-MM)  
4. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
5. 247-0896 [1] HARNESS AS-WIRING (CONVERTER)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  230-5011 [2] RECEPTACLE AS-CONNECTOR (6-PIN)  
  M   METRIC PART
 

#SEBP43470313
 

238-2120: WIRING GP-COUNTERWEIGHT

238-2120 WIRING GP-COUNTERWEIGHT
S/N TAJ1-UP
COUNTERWEIGHT REMOVAL
PART OF 246-2786, 246-2789 COUNTERWEIGHT AR
AN ATTACHMENT
i02158621 SEBP4347
2382120 WIRING GP-COUNTERWEIGHT Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 238-2352 [1] HARNESS AS-SWITCH (COUNTERWEIGHT REMOVAL)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
2. 3S-2093 [4] STRAP-CABLE  
3. 114-0421 [1] SWITCH AS-TOGGLE (CTWT REMOVAL)  
  3L-8187 [12] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [12] SCREW-MACHINE (6-32X0.25-IN)  
4. 132-1854 [1] BRACKET  
5. 6V-9673 M [2] SCREW-MACHINE (M5X0.8X12-MM)  
6. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
7. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
8. 116-0118 [1] CLIP  
9. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
 

#SEBP43470314
 

219-7462: WIRING GP-ELECTRONIC CONTROL

219-7462 WIRING GP-ELECTRONIC CONTROL
S/N MHX1-UP
PART OF 266-4379, 270-6816, 286-9796 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02068599 SEBP4347
2197462 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [15] STRAP-CABLE  
3. 9X-2097 M [1] STUD (M8X1.25-THD)  
4. 206-2423 [1] SADDLE-MOUNTING  
5. 219-7461 [1] HARNESS AS-CONTROL (ELECTRONIC CONTROL MODULE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [2] STRAP-CABLE  
  8T-8737 [81] PLUG-SEAL  
  105-1797 [1] MOUNT  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  194-5226 [62] WIRE AS (16-GA)  
    -OR-
  194-5227 [62] WIRE AS (14-GA)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [6] PIN-CONNECTOR (14-GA TO 16-GA)  
  211-6807 [1] COVER-CONNECTOR  
  264-5732 [1] PLUG AS-CONNECTOR (120-PIN)  
  288-7324 [1] SEAL-CONNECTOR  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
6. 303-5952 [1] STRAP-CABLE  
7. 132-5789 [2] CLIP (LADDER)  
8. 156-6175 [2] CLIP (LADDER)  
10. 2Y-5829 M [1] NUT (M10X1.5-THD)  
11. 4P-7581 [3] CLIP (LADDER)  
12. 5P-9085 [1] CLIP (LOOP)  
13. 6V-3918 M [1] BOLT (M8X1.25X50-MM)  
14. 6V-5839 [5] WASHER (11X21X2.5-MM THK)  
15. 6V-8212 M [4] BOLT (M10X1.5X16-MM)  
16. 6V-8836 M [2] BOLT (M6X1X14-MM)  
19. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
20. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP43470315
 

354-0045: WIRING GP-ELECTRONIC CONTROL

354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF1-4789; MHX10289-12108
PART OF 286-9796 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@
i03957677 SEBP4347
3540045 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [13] STRAP-CABLE  
2. 5P-9085 [1] CLIP (LOOP)  
3. 354-0048 Y [1] HARNESS AS-ENGINE  
4. 132-5789 [3] CLIP (LADDER)  
5. 156-6175 [2] CLIP (LADDER)  
6. 2Y-5829 M [2] NUT (M10X1.5-THD)  
7. 4P-7581 [4] CLIP (LADDER)  
8. 6V-3918 M [1] BOLT (M8X1.25X50-MM)  
9. 6V-5839 [6] WASHER (11X21X2.5-MM THK)  
10. 6V-8212 M [4] BOLT (M10X1.5X16-MM)  
11. 6V-8836 M [2] BOLT (M6X1X14-MM)  
12. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
13. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-2097 M [1] STUD (M8X1.25-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43470316
 

354-0045: WIRING GP-ELECTRONIC CONTROL

354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF4790-8664
PART OF 286-9796 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@
i05397012 SEBP4347
3540045 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 C [14] STRAP-CABLE  
2. 5P-9085 [1] CLIP (LOOP)  
3. 385-2664 CY [1] HARNESS AS-ENGINE  
4. 132-5789 [3] CLIP (LADDER)  
5. 156-6175 [2] CLIP (LADDER)  
6. 2Y-5829 M [2] NUT (M10X1.5-THD)  
7. 4P-7581 C [3] CLIP (LADDER)  
8. 6V-3918 M [1] BOLT (M8X1.25X50-MM)  
9. 6V-5839 C [7] WASHER (11X21X2.5-MM THK)  
10. 6V-8212 CM [5] BOLT (M10X1.5X16-MM)  
11. 6V-8836 M [2] BOLT (M6X1X14-MM)  
12. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
13. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-2097 M [1] STUD (M8X1.25-THD)  
15. 352-3970 C [1] CLIP (LADDER)  
16. 4P-8134 C [1] CLIP (LADDER)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43470317
 

354-0045: WIRING GP-ELECTRONIC CONTROL

354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF8665-UP
PART OF 286-9796 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@
i07245662 SEBP4347
3540045 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 C [16] STRAP-CABLE  
2. 516-4037 CY [1] HARNESS AS-SENSOR (ENGINE)  
3. 132-5789 C [2] CLIP (LADDER)  
4. 156-6175 [2] CLIP (LADDER)  
5. 2Y-5829 M [2] NUT (M10X1.5-THD)  
6. 352-3970 [1] CLIP (LADDER)  
7. 4P-7581 C [4] CLIP (LADDER)  
8. 4P-8134 C [2] CLIP (LADDER)  
9. 5P-9085 [1] CLIP (LOOP)  
10. 6V-3918 M [1] BOLT (M8X1.25X50-MM)  
11. 6V-5839 C [7] WASHER (11X21X2.5-MM THK)  
12. 6V-8212 CM [6] BOLT (M10X1.5X16-MM)  
13. 6V-8836 M [2] BOLT (M6X1X14-MM)  
14. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
15. 9X-2097 M [1] STUD (M8X1.25-THD)  
16. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
17. 8M-9124 [1] WASHER (10X22.5X8-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43470318
 

238-2273: WIRING GP-FAN

238-2273 WIRING GP-FAN -REVERSING
S/N TAJ1-UP
PART OF 284-7995 CONTROL AR-FAN
AN ATTACHMENT
i02157991 SEBP4347
2382273 WIRING GP-FAN Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 7K-1181 [11] STRAP-CABLE  
3. 111-4836 [2] CLIP  
4. 116-0118 [1] CLIP  
5. 204-1611 [1] STRAP (DUAL)  
6. 238-2470 [1] HARNESS AS-CONTROL (PUMP)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7. 7X-2621 M [1] BOLT (M10X1.5X12-MM)  
8. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
 

#SEBP43470319
 

227-7143: WIRING GP-FINE SWING

227-7143 WIRING GP-FINE SWING
S/N TAJ1-UP
PART OF 270-2416 CHASSIS AR
i02160117 SEBP4347
2277143 WIRING GP-FINE SWING Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-4836 [3] CLIP  
2. 111-4837 [2] CLIP  
3. 238-1484 [1] HARNESS AS-WIRING (FINE SWING)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
4. 238-2171 [1] BRACKET AS  
5. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Electrical Connectors
C11 and C13 Engines and 14M and 16M Motor Graders
Wiring Information
C11 and C13 Engines and 14M and 16M Motor Graders
Electrical Connectors - Inspect
C11 and C13 Engines and 14M and 16M Motor Graders

Caterpillar Parts SIS Catalog 345C :

WIRING GP-CONSOLE
231-1836 WIRING GP-CONSOLE
231-1835 WIRING GP-CONSOLE
WIRING GP-COMMUNICATION
259-5261 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
259-5257 WIRING GP-COMMUNICATION
WIRING GP-COMBINED FLOW
227-7139 WIRING GP-COMBINED FLOW
WIRING GP-CHASSIS
275-6871 WIRING GP-CHASSIS
WIRING GP-CHASSIS
275-6871 WIRING GP-CHASSIS
WIRING GP-CHASSIS
275-6871 WIRING GP-CHASSIS
WIRING GP-CONTROL
227-7140 WIRING GP-CONTROL
WIRING GP-CONVERTER
247-0899 WIRING GP-CONVERTER
WIRING GP-COUNTERWEIGHT
238-2120 WIRING GP-COUNTERWEIGHT
WIRING GP-ELECTRONIC CONTROL
219-7462 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
354-0045 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
354-0045 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
354-0045 WIRING GP-ELECTRONIC CONTROL
WIRING GP-FAN
238-2273 WIRING GP-FAN

Truck sale:

Caterpillar 345C
 
Caterpillar 345C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 345C
 
Caterpillar 345C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 345C, Crawler Excavators, Construction
 
Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 345C, Crawler Excavators, Construction
70,587 
Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
 
70,255 
Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.