AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

204-3462 WIRING GP-GRADE CONTROL S/N TAJ1-UP PART OF 292-0277 GRADE CONTROL AR-SATELLITE 345C EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL
POWER TRAIN AR
SPROCKET GP

EXCAVATOR 345C EXCAVATOR TAJ
 345C Excavator TAJ00001-UP (MACHINE) POWERED BY C13 Engine SEBP4347 345C TAJ   (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-FAN
238-2273 WIRING GP-FAN
WIRING GP-FINE SWING
227-7143 WIRING GP-FINE SWING
204-3462 WIRING GP-GRADE CONTROL
WIRING GP-HAMMER
227-7137 WIRING GP-HAMMER
WIRING GP-PLATFORM
238-2155 WIRING GP-PLATFORM
WIRING GP-QUICK COUPLER
281-4518 WIRING GP-QUICK COUPLER
 

#SEBP43470320
 

204-3462: WIRING GP-GRADE CONTROL

204-3462 WIRING GP-GRADE CONTROL
S/N TAJ1-UP
PART OF 292-0277 GRADE CONTROL AR-SATELLITE
i02795785 SEBP4347
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4137 M [5] BOLT (M10X1.5X20-MM)  
  9X-2480 M [4] BOLT (M6X1X45-MM)  
  277-2109 [1] CABLE AS (INLINE)  
  285-6539 [1] CABLE AS (BOOM)  
  285-6544 [1] CABLE AS (STICK)  
  291-1827 [1] CABLE AS (BUCKET)  
  286-2484 [4] CLAMP  
  6D-4244 [2] CLIP (LOOP)  
  111-4836 [21] CLIP  
  8T-4133 M [19] NUT (M10X1.5-THD)  
  107-4749 [2] PLATE  
  3S-2093 [11] STRAP-CABLE  
  7K-1181 [8] STRAP-CABLE  
  9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  8T-4121 [24] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
 

#SEBP43470321
 

227-7137: WIRING GP-HAMMER

227-7137 WIRING GP-HAMMER -1-PUMP/2-PUMP, 1-WAY, FOOT SW
S/N TAJ1-UP
PART OF 239-8948 CONTROL AR-AUXILIARY
AN ATTACHMENT
i02230506 SEBP4347
2277137 WIRING GP-HAMMER Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [10] STRAP-CABLE  
2. 7I-2673 [1] STRAP-CABLE  
3. 7K-1181 [21] STRAP-CABLE  
4. 116-0118 [3] CLIP  
5. 149-5050 [1] RELAY (24-VOLT)  
6. 251-0375 [1] HARNESS AS-PANEL (MAIN RELAY)  
  243-4506 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
7. 251-0377 [1] HARNESS AS-CONTROL (HAMMER)  
  230-4013 [1] PLUG AS-CONNECTOR (3-PIN)  
  243-4508 [2] RECEPTACLE AS-CONNECTOR (6-PIN)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8. 259-4891 [1] HARNESS AS-OPERATOR CONTROLS  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4013 [1] PLUG AS-CONNECTOR (3-PIN)  
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  243-4506 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
9. 132-5789 [1] CLIP (LADDER)  
10. 5C-2890 M [1] NUT (M6X1-THD)  
11. 7X-2621 M [1] BOLT (M10X1.5X12-MM)  
12. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
13. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP43470322
 

238-2155: WIRING GP-PLATFORM

238-2155 WIRING GP-PLATFORM
S/N TAJ1-UP
PART OF 270-2418 OPERATOR AR
i02159143 SEBP4347
2382155 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 7G-1060 [1] STRAP AS-GROUND  
3. 7K-1181 [9] STRAP-CABLE  
4. 111-4837 [4] CLIP  
5. 111-4838 [2] CLIP  
6. 111-4839 [2] STRAP  
7. 116-0118 [9] CLIP  
8. 204-1816 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
9. 231-1692 [1] HARNESS AS-PLATFORM  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  153-2620 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  243-4506 [1] RECEPTACLE AS-CONNECTOR (3-PIN)(3-PIN)  
  243-4508 [3] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4509 [2] RECEPTACLE AS-CONNECTOR (8-PIN)(8-PIN)  
  243-4510 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  231-2295 [2] PLUG AS-CONNECTOR (8-PIN)  
  230-4009 [2] PLUG AS-CONNECTOR (12-PIN)  
  230-4013 [1] PLUG AS-CONNECTOR (3-PIN)(3-PIN)  
  230-5008 [1] PLUG AS-CONNECTOR (4-PIN)  
  230-5010 [3] PLUG AS-CONNECTOR (6-PIN)  
10. 234-1122 [1] COVER  
11. 095-0728 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
12. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
13. 3E-5169 [1] GUARD-SWITCH  
14. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
15. 7X-2621 M [6] BOLT (M10X1.5X12-MM)  
16. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
18. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
19. 259-4939 [1] RECEPTACLE AS  
  8T-8737 [6] PLUG-SEAL  
  M   METRIC PART
 

#SEBP43470323
 

281-4518: WIRING GP-QUICK COUPLER

281-4518 WIRING GP-QUICK COUPLER
S/N TAJ1-UP
PART OF 276-2833 CONTROL AR-COUPLER
AN ATTACHMENT
i02800994 SEBP4347
2814518 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 B [16] STRAP-CABLE  
2. 281-4519 [1] HARNESS AS-SOLENOID  
3. 111-4836 [2] CLIP  
4. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP43470324
 

230-0961: WIRING GP-UNIT INJECTOR

230-0961 WIRING GP-UNIT INJECTOR
S/N TXF1-UP; MHX1-UP
PART OF 267-0009, 317-9990, 356-2433 ENGINE AR-CORE
ALSO AN ATTACHMENT
i02056539 SEBP4347
2300961 WIRING GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-6508 [6] CAP AS  
2. 418-7614 Y [1] HARNESS AS-WIRING (UNIT INJECTOR)  
3. 6V-8837 M [5] BOLT (M6X1X16-MM)  
4. 6V-8836 M [2] BOLT (M6X1X14-MM)  
5. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
6. 237-9960 [5] CLIP (LADDER)  
7. 3S-2093 [5] STRAP-CABLE  
8. 5P-0537 [5] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43470325
 

227-6044: DRIVE GP-FINAL

227-6044 DRIVE GP-FINAL -WITH MOTOR
S/N TAJ1-236
PART OF 227-6042 POWER TRAIN AR
i02161074 SEBP4347
2276044 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-9333 Y [1] MOTOR & MTG GP-TRAVEL  
2. 227-6045 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP43470326
 

227-6044: DRIVE GP-FINAL

227-6044 DRIVE GP-FINAL -WITH MOTOR
S/N TAJ237-UP
PART OF 227-6042 POWER TRAIN AR
i02488618 SEBP4347
2276044 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-4504 CY [1] MOTOR & MTG GP-TRAVEL  
2. 227-6045 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP43470327
 

227-6045: DRIVE GP-FINAL

227-6045 DRIVE GP-FINAL -WITHOUT MOTOR
S/N TAJ1-UP
PART OF 227-6044 DRIVE GP-FINAL
i02161077 SEBP4347
2276045 DRIVE GP-FINAL Parts scheme 2276045 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-0524 [2] CONE-BEARING  
2. 2R-0525 [2] CUP-BEARING  
3. 4I-7576 [14] WASHER (66.3X104X3-MM THK)  
4. 7M-8485 [2] SEAL-O-RING  
5. 7Y-0661 [3] SHAFT-PLANETARY  
6. 7Y-0662 [4] SHAFT-PLANETARY  
7. 199-4583 [11] BEARING AS  
8. 7Y-0808 B [1] SHIM (1.6-MM THK)  
9. 7Y-1469 [1] COUPLING  
10. 7Y-1470 [1] GEAR-SUN (21-TEETH)  
11. 7Y-1472 B [1] SHIM (0.15-MM THK)  
12. 7Y-1473 B [1] SHIM (0.3-MM THK)  
13. 7Y-1474 B [1] SHIM (0.4-MM THK)  
14. 7Y-1475 B [1] SHIM (0.5-MM THK)  
15. 7Y-1476 B [1] SHIM (0.6-MM THK)  
16. 7Y-1477 B [1] SHIM (0.7-MM THK)  
17. 7Y-1478 B [1] SHIM (0.8-MM THK)  
18. 7Y-1479 B [1] SHIM (1-MM THK)  
19. 7Y-1480 B [1] SHIM (1.6-MM THK)  
20. 7Y-1482 [1] CARRIER-PLANETARY  
21. 7Y-1483 [1] GEAR-RING (63-TEETH)  
22. 7Y-1485 [1] CARRIER-PLANETARY  
23. 7Y-1487 [1] GEAR-RING (85-TEETH)  
24. 7Y-1488 [1] CARRIER AS  
  7Y-0656 [3] SHAFT-PLANETARY  
25. 7Y-1491 [1] GEAR-SUN (21-TEETH)  
26. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
27. 7Y-1495 [3] GEAR-PLANETARY (29-TEETH)  
28. 7Y-1498 [1] COVER  
29. 7Y-1499 [3] GEAR-PLANETARY (20-TEETH)  
30. 7Y-1504 [4] GEAR-PLANETARY (20-TEETH)  
31. 7Y-5235 M [20] BOLT (M24X3X190-MM)  
32. 110-7217 [2] RING-RETAINING  
33. 114-1541 [6] PIN-DOWEL  
34. 169-5559 [1] GEAR-SUN (26-TEETH)  
35. 199-4719 [1] GEAR-COUPLING  
36. 200-3489 [1] HOUSING-MOTOR  
37. 200-3490 [1] HOUSING-GEAR  
38. 205-9025 [1] SEAL GP-DUO-CONE  
  205-9024 [2] RING-TORIC  
39. 227-6048 [12] WASHER (26X40X4-MM THK)  
40. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
41. 199-4582 [3] BEARING AS  
42. 095-0891 [7] PIN-SPRING  
43. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
44. 3E-2338 [2] PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)  
45. 6V-8133 M [12] BOLT (M24X3X80-MM)  
46. 7Y-1484 [1] SPACER (191X221X8.5-MM THK)  
47. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
48. 8C-5240 [1] SEAL-O-RING  
49. 8T-3957 M [10] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
50. 8T-4167 [20] WASHER-HARD (26X44X4-MM THK)  
51. 8T-4240 [3] RING-RETAINING  
52. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP43470328
 

227-6042: POWER TRAIN AR

227-6042 POWER TRAIN AR
S/N TAJ1-UP
PART OF 265-1105 GENERAL AR
i02126029 SEBP4347
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  227-6046 Y [1] DRIVE GP-SWING (WITH MOTOR, LH)  
  227-6047 Y [1] DRIVE GP-SWING (WITH MOTOR, RH)  
  227-6050 Y [1] FASTENER GP-SWING & FINAL DR  
  227-6044 Y [2] DRIVE GP-FINAL (WITH MOTOR)  
  115-6399 Y [2] SPROCKET GP (NON-SEGMENTED)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP43470329
 

115-6399: SPROCKET GP

115-6399 SPROCKET GP
S/N TAJ1-UP
PART OF 227-6042 POWER TRAIN AR
i00471635 SEBP4347
1156399 SPROCKET GP Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 520-7951 M [20] BOLT-HEAD (M24X3X60-MM)  
2. 124-3296 [1] SPROCKET-TRACK (23-TEETH)  
  M   METRIC PART
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Electrical Connectors
C11 and C13 Engines and 14M and 16M Motor Graders
Wiring Information
C11 and C13 Engines and 14M and 16M Motor Graders
Electrical Connectors - Inspect
C11 and C13 Engines and 14M and 16M Motor Graders

Caterpillar Parts SIS Catalog 345C :

WIRING GP-FINE SWING
227-7143 WIRING GP-FINE SWING
WIRING GP-FAN
238-2273 WIRING GP-FAN
WIRING GP-ELECTRONIC CONTROL
354-0045 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
354-0045 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
354-0045 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
219-7462 WIRING GP-ELECTRONIC CONTROL
WIRING GP-COUNTERWEIGHT
238-2120 WIRING GP-COUNTERWEIGHT
WIRING GP-CONVERTER
247-0899 WIRING GP-CONVERTER
WIRING GP-HAMMER
227-7137 WIRING GP-HAMMER
WIRING GP-PLATFORM
238-2155 WIRING GP-PLATFORM
WIRING GP-QUICK COUPLER
281-4518 WIRING GP-QUICK COUPLER
WIRING GP-UNIT INJECTOR
230-0961 WIRING GP-UNIT INJECTOR
DRIVE GP-FINAL
227-6044 DRIVE GP-FINAL
DRIVE GP-FINAL
227-6044 DRIVE GP-FINAL
DRIVE GP-FINAL
227-6045 DRIVE GP-FINAL
227-6042 POWER TRAIN AR

Truck sale:

Caterpillar 345C
 
Caterpillar 345C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 345C
 
Caterpillar 345C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 345C, Crawler Excavators, Construction
 
Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 345C, Crawler Excavators, Construction
70,587 
Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
 
70,255 
Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.