AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

973C TRACK-TYPE LOADER LDX00001-UP (MACHINE) POWERED BY C9 Engine POWER TRAIN Caterpillar SIS



TRACK LOADER 973C TRACK LOADER LDX
 973C TRACK-TYPE LOADER LDX00001-UP (MACHINE) POWERED BY C9 Engine SEBP4351 973C LDX   (2005)

Parts group 973C:

  For full view, you need register
POWER TRAIN
BRAKE & DRIVE GP
FINAL DRIVE & BRAKE GP
229-8521 FINAL DRIVE & BRAKE GP
229-8521 FINAL DRIVE & BRAKE GP
S/N LDX1-UP
PART OF 246-8437 POWER TRAIN AR
FINAL DRIVE & BRAKE GP
236-6678 FINAL DRIVE & BRAKE GP
236-6678 FINAL DRIVE & BRAKE GP
S/N LDX1-UP
PART OF 276-8040 MODIFICATION AR
AN ATTACHMENT
FINAL DRIVE & BRAKE GP
239-2085 FINAL DRIVE & BRAKE GP
239-2085 FINAL DRIVE & BRAKE GP -STEEL MILL
S/N LDX1-UP
PART OF 276-8042 POWER TRAIN AR
AN ATTACHMENT
FINAL DRIVE & BRAKE GP
242-0503 FINAL DRIVE & BRAKE GP
242-0503 FINAL DRIVE & BRAKE GP -WASTE HANDLING
S/N LDX1-UP
PART OF 274-9136 POWER TRAIN AR, 265-7870 WASTE HANDLING AR
AN ATTACHMENT
DRIVE GP
DRIVE GP-FLEXIBLE COUPLING
215-8925 DRIVE GP-FLEXIBLE COUPLING
215-8925 DRIVE GP-FLEXIBLE COUPLING
S/N LDX1-UP
PART OF 246-8437 POWER TRAIN AR
DRIVE GP-PUMP
247-8359 DRIVE GP-PUMP
247-8359 DRIVE GP-PUMP -POWER TRAIN
S/N LDX1-UP
PART OF 247-8366 DRIVE GP-PUMP
DRIVE GP-PUMP
247-8366 DRIVE GP-PUMP
247-8366 DRIVE GP-PUMP -POWER TRAIN
S/N LDX1-UP
PART OF 246-8437 POWER TRAIN AR
FILLER GP-POWER TRAIN OIL
FILLER GP-POWER TRAIN OIL
152-7491 FILLER GP-POWER TRAIN OIL
152-7491 FILLER GP-POWER TRAIN OIL
S/N LDX1-UP
PART OF 247-8366 DRIVE GP-PUMP
FILTER GP
FILTER & MTG GP-POWER TRAIN
205-9712 FILTER & MTG GP-POWER TRAIN
205-9712 FILTER & MTG GP-POWER TRAIN
S/N LDX1-UP
PART OF 246-8437 POWER TRAIN AR
FILTER GP-OIL
209-5592 FILTER GP-OIL
209-5592 FILTER GP-OIL -POWER TRAIN CASE DRAIN
S/N LDX1-UP
PART OF 205-9712 FILTER & MTG GP-POWER TRAIN
FILTER GP-OIL
209-5599 FILTER GP-OIL
209-5599 FILTER GP-OIL -CHARGE-POWER TRAIN
S/N LDX1-UP
PART OF 205-9712 FILTER & MTG GP-POWER TRAIN
FIELD REPLACEMENT ORDER @@@@@232-1864@@@@@
FILTER GP-OIL
232-1864 FILTER GP-OIL
232-1864 FILTER GP-OIL -CHARGE-POWER TRAIN
S/N LDX1-UP
FIELD REPLACEMENT FOR @@@@@209-5599@@@@@
LINES GP-CONTROL
LINES GP-CONTROL
264-5747 LINES GP-CONTROL
264-5747 LINES GP-CONTROL -DRIVE PUMP
S/N LDX1-UP
PART OF 246-8437 POWER TRAIN AR
LINES GP-DRAIN
LINES GP-DRAIN
211-5721 LINES GP-DRAIN
211-5721 LINES GP-DRAIN -STEERING LINES
S/N LDX1-UP
PART OF 246-8437 POWER TRAIN AR
LINES GP-DRAIN
264-1074 LINES GP-DRAIN
264-1074 LINES GP-DRAIN -POWER TRAIN
S/N LDX1-UP
HYDRAULIC TANK
PART OF 246-8437 POWER TRAIN AR
LINES GP-HYDROSTATIC
LINES GP-HYDROSTATIC
151-1233 LINES GP-HYDROSTATIC
151-1233 LINES GP-HYDROSTATIC
S/N LDX1-UP
PART OF 246-8437 POWER TRAIN AR
LINES GP-HYDROSTATIC
167-3807 LINES GP-HYDROSTATIC
167-3807 LINES GP-HYDROSTATIC -STEEL MILL
S/N LDX1-UP
PART OF 276-8042 POWER TRAIN AR
AN ATTACHMENT
LINES GP-SYNCHRONIZING
LINES GP-SYNCHRONIZING
224-5054 LINES GP-SYNCHRONIZING
224-5054 LINES GP-SYNCHRONIZING
S/N LDX1-UP
PART OF 246-8437 POWER TRAIN AR
MOTOR GP
HEAD GP-MOTOR
206-6516 HEAD GP-MOTOR
206-6516 HEAD GP-MOTOR
S/N LDX1-UP
PART OF 187-3454 MOTOR GP-TRAVEL
MOTOR & MTG GP-TRAVEL
205-9711 MOTOR & MTG GP-TRAVEL
205-9711 MOTOR & MTG GP-TRAVEL
S/N LDX1-UP
PART OF 246-8437 POWER TRAIN AR
MOTOR GP-TRAVEL
187-3454 MOTOR GP-TRAVEL
187-3454 MOTOR GP-TRAVEL -HYDROSTATIC DRIVE, LH, RH
S/N LDX1-UP
PART OF 205-9711 MOTOR & MTG GP-TRAVEL
ROTATING GP-MOTOR
247-4676 ROTATING GP-MOTOR
247-4676 ROTATING GP-MOTOR -HYDROSTATIC DRIVE
S/N LDX1-UP
PART OF 187-3454 MOTOR GP-TRAVEL
VALVE GP-FLUSHING
191-0592 VALVE GP-FLUSHING
191-0592 VALVE GP-FLUSHING -HYDROSTATIC DRIVE
S/N LDX1-UP
PART OF 187-3454 MOTOR GP-TRAVEL
175-2441 VALVE GP-MOTOR CONTROL
175-2441 VALVE GP-MOTOR CONTROL -PRESSURE OVERRIDE
S/N LDX1-UP
PART OF 206-6518 VALVE GP-MOTOR CONTROL
VALVE GP-MOTOR CONTROL
175-2442 VALVE GP-MOTOR CONTROL
175-2442 VALVE GP-MOTOR CONTROL -PRESSURE REDUCING
S/N LDX1-UP
PART OF 206-6518 VALVE GP-MOTOR CONTROL
VALVE GP-MOTOR CONTROL
191-0596 VALVE GP-MOTOR CONTROL
191-0596 VALVE GP-MOTOR CONTROL -DISPLACEMENT
S/N LDX1-UP
PART OF 187-3454 MOTOR GP-TRAVEL
VALVE GP-MOTOR CONTROL
206-6518 VALVE GP-MOTOR CONTROL
206-6518 VALVE GP-MOTOR CONTROL -CUTOFF
S/N LDX1-UP
PART OF 187-3454 MOTOR GP-TRAVEL
POWER TRAIN AR
246-8437 POWER TRAIN AR
246-8437 POWER TRAIN AR
S/N LDX1-UP
PART OF 246-8434 GENERAL AR
274-9136 POWER TRAIN AR
274-9136 POWER TRAIN AR -WASTE HANDLER
S/N LDX1-UP
PART OF 274-9140 TRANSFER STATION AR
AN ATTACHMENT
276-8042 POWER TRAIN AR
276-8042 POWER TRAIN AR -STEEL MILL
S/N LDX1-UP
PART OF 274-9135 STEEL MILL AR
AN ATTACHMENT
PUMP GP
ACTUATOR GP-PUMP
217-2531 ACTUATOR GP-PUMP
217-2531 ACTUATOR GP-PUMP -HYDROSTATIC DRIVE
S/N LDX1-UP
PART OF 228-7585, 230-7333 PUMP GP-PISTON
HEAD GP-PUMP
192-0934 HEAD GP-PUMP
192-0934 HEAD GP-PUMP -POWER TRAIN
S/N LDX1-UP
PART OF 228-7585, 230-7333 PUMP GP-PISTON
PUMP & MTG GP-POWER TRAIN
205-9710 PUMP & MTG GP-POWER TRAIN
205-9710 PUMP & MTG GP-POWER TRAIN
S/N LDX1-UP
PART OF 246-8437 POWER TRAIN AR
PUMP GP-GEAR
192-0935 PUMP GP-GEAR
192-0935 PUMP GP-GEAR -RH, CHARGE
S/N LDX1-UP
PART OF 230-7333 PUMP GP-PISTON
PUMP GP-GEAR
193-4675 PUMP GP-GEAR
193-4675 PUMP GP-GEAR -LH, CHARGE
S/N LDX1-UP
PART OF 228-7585 PUMP GP-PISTON
PUMP GP-GEAR
204-5130 PUMP GP-GEAR
204-5130 PUMP GP-GEAR -IMPLEMENT PILOT
S/N LDX1-245
PART OF 228-7586 PUMP GP-PISTON & GEAR
PUMP GP-GEAR
288-3860 PUMP GP-GEAR
288-3860 PUMP GP-GEAR -IMPLEMENT PILOT
S/N LDX246-UP
PART OF 228-7586 PUMP GP-PISTON & GEAR
PUMP GP-PISTON
228-7585 PUMP GP-PISTON
228-7585 PUMP GP-PISTON -DRIVE, LH
S/N LDX1-UP
PART OF 205-9710 PUMP & MTG GP-POWER TRAIN
PUMP GP-PISTON
230-7333 PUMP GP-PISTON
230-7333 PUMP GP-PISTON -DRIVE, RH
S/N LDX1-UP
PART OF 228-7586 PUMP GP-PISTON & GEAR
PUMP GP-PISTON & GEAR
228-7586 PUMP GP-PISTON & GEAR
228-7586 PUMP GP-PISTON & GEAR -RH, DRIVE WITH PILOT
S/N LDX1-245
PART OF 205-9710 PUMP & MTG GP-POWER TRAIN
PUMP GP-PISTON & GEAR
228-7586 PUMP GP-PISTON & GEAR
228-7586 PUMP GP-PISTON & GEAR -RH, DRIVE WITH PILOT
S/N LDX246-UP
PART OF 205-9710 PUMP & MTG GP-POWER TRAIN
ROTATING GP-PUMP
192-0933 ROTATING GP-PUMP
192-0933 ROTATING GP-PUMP -HYDROSTATIC DRIVE
S/N LDX1-UP
PART OF 228-7585, 230-7333 PUMP GP-PISTON
SPROCKET GP
SEGMENT GP-SPROCKET
215-7174 SEGMENT GP-SPROCKET
215-7174 SEGMENT GP-SPROCKET
S/N LDX1-UP
PART OF 246-8437 POWER TRAIN AR
TRANSMISSION GP
MOUNTING GP-ENGINE & XMSN
193-7826 MOUNTING GP-ENGINE & XMSN
193-7826 MOUNTING GP-ENGINE & XMSN
S/N LDX1-UP
PART OF 246-8438 INSTALLATION AR-ENGINE
VALVE GP
VALVE GP-CHECK
175-2440 VALVE GP-CHECK
175-2440 VALVE GP-CHECK
S/N LDX1-UP
PART OF 191-0596 VALVE GP-MOTOR CONTROL
VALVE GP-BYPASS
VALVE GP-BYPASS
211-8158 VALVE GP-BYPASS
211-8158 VALVE GP-BYPASS -BRAKE RELEASE
S/N LDX1-UP
PART OF 167-3807 LINES GP-HYDROSTATIC
AN ATTACHMENT
VALVE GP-CONTROL
VALVE & MTG GP-CONTROL
183-2808 VALVE & MTG GP-CONTROL
183-2808 VALVE & MTG GP-CONTROL -HYDROSTATIC TRANSMISSION
S/N LDX1-UP
24-VOLT
PART OF 197-0383 VALVE & MTG GP-SOLENOID
VALVE GP-FLUSHING
VALVE GP-FLUSHING
191-0592 VALVE GP-FLUSHING
191-0592 VALVE GP-FLUSHING -HYDROSTATIC DRIVE
S/N LDX1-UP
PART OF 187-3454 MOTOR GP-TRAVEL
VALVE GP-RELIEF
VALVE GP-RELIEF
157-3843 VALVE GP-RELIEF
157-3843 VALVE GP-RELIEF -CHARGE PRESSURE
S/N LDX1-UP
PART OF 183-2808 VALVE & MTG GP-CONTROL
VALVE GP-SOLENOID
VALVE & MTG GP-SOLENOID
197-0383 VALVE & MTG GP-SOLENOID
197-0383 VALVE & MTG GP-SOLENOID -HYDROSTATIC TRANSMISSION
S/N LDX1-UP
24 VOLT
PART OF 246-8437 POWER TRAIN AR
VALVE GP-SOLENOID
130-6913 VALVE GP-SOLENOID
130-6913 VALVE GP-SOLENOID
S/N LDX1-UP
24 VOLTS DC
PART OF 225-2384 VALVE GP-SYNCHRONIZING
VALVE GP-SOLENOID
152-8385 VALVE GP-SOLENOID
152-8385 VALVE GP-SOLENOID
S/N LDX1-UP
PART OF 197-0383 VALVE & MTG GP-SOLENOID
VALVE GP-SOLENOID
195-3739 VALVE GP-SOLENOID
195-3739 VALVE GP-SOLENOID
S/N LDX1-UP
PART OF 197-0383 VALVE & MTG GP-SOLENOID
VALVE GP-SYNCHRONIZING
VALVE GP-SYNCHRONIZING
225-2384 VALVE GP-SYNCHRONIZING
225-2384 VALVE GP-SYNCHRONIZING -HYDROSTATIC DRIVE
S/N LDX1-UP
PART OF 246-8437 POWER TRAIN AR
COOLER GP
MOUNTING GP-RAD & XMSN COOLER
261-2162 MOUNTING GP-RAD & XMSN COOLER
261-2162 MOUNTING GP-RAD & XMSN COOLER
S/N LDX1-UP
PART OF 246-8438 INSTALLATION AR-ENGINE
LINES GP-POWER TRAIN COOLER
263-8728 LINES GP-POWER TRAIN COOLER
263-8728 LINES GP-POWER TRAIN COOLER
S/N LDX1-UP
PART OF 246-8437 POWER TRAIN AR
DRIVE GP-FINAL
FINAL DRIVE & BRAKE GP
229-8521 FINAL DRIVE & BRAKE GP
229-8521 FINAL DRIVE & BRAKE GP
S/N LDX1-UP
PART OF 246-8437 POWER TRAIN AR
FINAL DRIVE & BRAKE GP
236-6678 FINAL DRIVE & BRAKE GP
236-6678 FINAL DRIVE & BRAKE GP
S/N LDX1-UP
PART OF 276-8040 MODIFICATION AR
AN ATTACHMENT
FINAL DRIVE & BRAKE GP
239-2085 FINAL DRIVE & BRAKE GP
239-2085 FINAL DRIVE & BRAKE GP -STEEL MILL
S/N LDX1-UP
PART OF 276-8042 POWER TRAIN AR
AN ATTACHMENT
FINAL DRIVE & BRAKE GP
242-0503 FINAL DRIVE & BRAKE GP
242-0503 FINAL DRIVE & BRAKE GP -WASTE HANDLING
S/N LDX1-UP
PART OF 274-9136 POWER TRAIN AR, 265-7870 WASTE HANDLING AR
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Installation Procedure For Welding Hub Assembly On Certain 973C Track-Type Loaders {4050, 4056}
Installation Procedure For Welding Hub Assembly On Certain 973C Track-Type Loaders {4050, 4056}
Technical Information Bulletin
Cracks in the Spindles on Track-Type Loaders{4050, 4056}
Cracks in the Spindles on Track-Type Loaders{4050, 4056}
Specifications
Brake and Final Drive Group
973C Track-Type Loader Power Train
Reuse And Salvage Guidelines
Salvage of Final Drive Carrier Plate forTrack-Type Loaders{0679, 4011, 4050, 4092}
Salvage of Final Drive Carrier Plate forTrack-Type Loaders{0679, 4011, 4050, 4092}
Thermal Spray Procedures for Track Loader - Sprocket Hub {0679, 4050}
Thermal Spray Procedures for Track Loader - Sprocket Hub {0679, 4050}
Troubleshooting
MID 079 - CID 0468 - FMI 03
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0468 - FMI 04
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0468 - FMI 13
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
Reuse And Salvage Guidelines
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Disassembly and Assembly
Flexible Coupling - Remove and Install
973C Track-Type Loader Powertrain
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Specifications
Case Drain Lines
973C Track-Type Loader Power Train
Operation and Maintenance Manual
Hydrostatic Drive Oil (Steel Mill) - Change
973C Track-Type Loader Steel Mill Supplement
Hydrostatic Drive Oil Level - Check
973C Track-Type Loader
Hydrostatic Drive Oil Sample - Obtain
973C Track-Type Loader Steel Mill Supplement
Pump Drive Gearbox Oil - Change
973C Track-Type Loader Steel Mill Supplement
Pump Drive Gearbox Oil Level - Check
973C Track-Type Loader
Pump Drive Gearbox Oil Sample - Obtain
973C Track-Type Loader
Hydrostatic Drive Oil - Change
973C Track-Type Loader
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING LINES AND FITTINGS IN THE DRIVE CIRCUIT BEFORE DELIVERING CERTAIN 973C TRACK LOADERS TO CUSTOMERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING LINES AND FITTINGS IN THE DRIVE CIRCUIT BEFORE DELIVERING CERTAIN 973C TRACK LOADERS TO CUSTOMERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Hydrostatic Pump Drive
973C Track-Type Loader Power Train
Drive Group (Flexible Coupling)
973C Track-Type Loader Power Train
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING LINES AND FITTINGS IN THE DRIVE CIRCUIT BEFORE DELIVERING CERTAIN 973C TRACK LOADERS TO CUSTOMERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING LINES AND FITTINGS IN THE DRIVE CIRCUIT BEFORE DELIVERING CERTAIN 973C TRACK LOADERS TO CUSTOMERS
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Piston Pump Neutral - Test and Adjust
973C Track-Type Loader Power Train
Piston Pump and Motor Maximum Displacement - Test
973C Track-Type Loader Power Train
Piston Pump and Piston Motor Efficiency - Test
973C Track-Type Loader Power Train
Disassembly and Assembly
Pump Drive - Disassemble
973C Track-Type Loader Powertrain
Pump Drive - Assemble
973C Track-Type Loader Powertrain
Pump Drive - Remove
973C Track-Type Loader Powertrain
Pump Drive - Install
973C Track-Type Loader Powertrain
Tool Operating Manual
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Operation and Maintenance Manual
Oil Filter - Inspect
973C Track-Type Loader
Hydrostatic Drive Oil Filter (Steel Mill) - Replace
973C Track-Type Loader Steel Mill Supplement
Hydrostatic Drive Oil Filter - Replace
973C Track-Type Loader
Technical Information Bulletin
Possible Early Failure Of The Hydraulic Oil Filter{3004, 3067, 5068}
Possible Early Failure Of The Hydraulic Oil Filter{3004, 3067, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Optional High Efficiency Filters Are Now Available {3004, 5068}
2007/12/17
Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
Improved Pins for the Front Idler Group Are Now Used {4159}
2006/01/23
Specifications
Case Drain Lines
973C Track-Type Loader Power Train
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING LINES AND FITTINGS IN THE DRIVE CIRCUIT BEFORE DELIVERING CERTAIN 973C TRACK LOADERS TO CUSTOMERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING LINES AND FITTINGS IN THE DRIVE CIRCUIT BEFORE DELIVERING CERTAIN 973C TRACK LOADERS TO CUSTOMERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING LINES AND FITTINGS IN THE DRIVE CIRCUIT BEFORE DELIVERING CERTAIN 973C TRACK LOADERS TO CUSTOMERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING LINES AND FITTINGS IN THE DRIVE CIRCUIT BEFORE DELIVERING CERTAIN 973C TRACK LOADERS TO CUSTOMERS
Service Magazine
Updated Clean Out and Machine Start Up Procedures For C-Series Track-Type Loader After Hystat Component Replacement or Failure {3154}
Updated Clean Out and Machine Start Up Procedures For C-Series Track-Type Loader After Hystat Component Replacement or Failure {3154}
Specifications
Neutral Start Switch
973C Track-Type Loader Power Train
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING LINES AND FITTINGS IN THE DRIVE CIRCUIT BEFORE DELIVERING CERTAIN 973C TRACK-TYPE LOADERS TO CUSTOMERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING LINES AND FITTINGS IN THE DRIVE CIRCUIT BEFORE DELIVERING CERTAIN 973C TRACK-TYPE LOADERS TO CUSTOMERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Improved Synchronizing Hoses Are Now Available On 973C Track-Type Loaders {3016}
2009/11/13
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING HYSTAT DRIVE MOTORS ON CERTAIN 973C TRACK-TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING HYSTAT DRIVE MOTORS ON CERTAIN 973C TRACK-TYPE LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING HYSTAT DRIVE MOTORS ON CERTAIN 973C TRACK-TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING HYSTAT DRIVE MOTORS ON CERTAIN 973C TRACK-TYPE LOADERS
Service Letter-Asia
Systems Operation
Piston Pump and Piston Motor Stroking Range (Drive)
973C Track-Type Loader Power Train
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING HYSTAT DRIVE MOTORS ON CERTAIN 973C TRACK-TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING HYSTAT DRIVE MOTORS ON CERTAIN 973C TRACK-TYPE LOADERS
Testing and Adjusting
Piston Pump and Motor Maximum Displacement - Test
973C Track-Type Loader Power Train
Piston Pump and Piston Motor Efficiency - Test
973C Track-Type Loader Power Train
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Track Drive Motor - Remove
973C Track-Type Loader Powertrain
Track Drive Motor - Install
973C Track-Type Loader Powertrain
Track Drive Motor - Disassemble
973C Track-Type Loader Powertrain
Track Drive Motor - Assemble
973C Track-Type Loader Powertrain
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Service Magazine
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING LINES AND FITTINGS IN THE DRIVE CIRCUIT BEFORE DELIVERING CERTAIN 973C TRACK-TYPE LOADERS TO CUSTOMERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING LINES AND FITTINGS IN THE DRIVE CIRCUIT BEFORE DELIVERING CERTAIN 973C TRACK-TYPE LOADERS TO CUSTOMERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Specifications
Hydrostatic Drive Pump
973C Track-Type Loader Power Train
Lines (Charge Pump)
973C Track-Type Loader Power Train
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING LINES AND FITTINGS IN THE DRIVE CIRCUIT BEFORE DELIVERING CERTAIN 973C TRACK-TYPE LOADERS TO CUSTOMERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING LINES AND FITTINGS IN THE DRIVE CIRCUIT BEFORE DELIVERING CERTAIN 973C TRACK-TYPE LOADERS TO CUSTOMERS
Service Letter-Asia
Systems Operation
Piston Pump and Piston Motor Stroking Range (Drive)
973C Track-Type Loader Power Train
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING LINES AND FITTINGS IN THE DRIVE CIRCUIT BEFORE DELIVERING CERTAIN 973C TRACK-TYPE LOADERS TO CUSTOMERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING LINES AND FITTINGS IN THE DRIVE CIRCUIT BEFORE DELIVERING CERTAIN 973C TRACK-TYPE LOADERS TO CUSTOMERS
Testing and Adjusting
Machine Speed Limit - Adjust - Submode 19
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
Piston Pump Neutral - Test and Adjust
973C Track-Type Loader Power Train
Piston Pump and Motor Maximum Displacement - Test
973C Track-Type Loader Power Train
Piston Pump and Piston Motor Efficiency - Test
973C Track-Type Loader Power Train
Bench Test Procedures
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Disassembly and Assembly
Hydraulic Drive Pump - Disassemble
973C Track-Type Loader Powertrain
Hydraulic Drive Pump - Assemble
973C Track-Type Loader Powertrain
Hydraulic Drive Pump - Remove
973C Track-Type Loader Powertrain
Hydraulic Drive Pump - Install
973C Track-Type Loader Powertrain
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Service Magazine
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2009/01/26
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Disassembly and Assembly
Sprocket Segment - Remove and Install
973C Track-Type Loader Powertrain
Final Drive and Sprocket - Remove
973C Track-Type Loader Powertrain
Final Drive and Sprocket - Install
973C Track-Type Loader Powertrain
Final Drive and Sprocket - Disassemble
973C Track-Type Loader Powertrain
Final Drive and Sprocket - Assemble
973C Track-Type Loader Powertrain
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Disassembly and Assembly
Hydrostatic Drive Oil Tank - Remove and Install
973C Track-Type Loader Powertrain
Truck Engine News
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/01
Special Instruction
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Special Instruction
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Bearing Bores in Hydrostatic Transmission Cases{3030, 3064, 3064, 7551}
Bearing Bores in Hydrostatic Transmission Cases{3030, 3064, 3064, 7551}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Service Magazine
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Testing and Adjusting
Cooler Bypass Valve - Test
973C Track-Type Loader Power Train
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Testing and Adjusting
Charge Relief Valve - Test and Adjust
973C Track-Type Loader Power Train
Specifications
Charge Pressure Relief Valve - Cold Oil
973C Track-Type Loader Power Train
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Disassembly and Assembly
Charge Pressure Relief Valve (Hydrostatic) - Remove and Install
973C Track-Type Loader Powertrain
Shuttle Valve (Hydrostatic) - Remove and Install
973C Track-Type Loader Powertrain
Troubleshooting
MID 079 - CID 0349 - FMI 03
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0349 - FMI 05
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0349 - FMI 06
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0133 - FMI 03
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0133 - FMI 05
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0133 - FMI 06
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0469 - FMI 03
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0469 - FMI 05
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0469 - FMI 06
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0470 - FMI 03
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0470 - FMI 05
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0470 - FMI 06
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0471 - FMI 03
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0471 - FMI 05
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0471 - FMI 06
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0472 - FMI 03
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0472 - FMI 05
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0472 - FMI 06
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0681 - FMI 03
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0681 - FMI 05
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0681 - FMI 06
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0133 - FMI 12
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
Disassembly and Assembly
Solenoid Valve (Hydrostatic) - Remove and Install
973C Track-Type Loader Powertrain
Service Magazine
A New Coil Assembly is Now Used {5479}
2009/02/09
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SYNCHRONIZATION BODY ON CERTAIN 973C TRACK LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SYNCHRONIZATION BODY ON CERTAIN 973C TRACK LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Synchronizing Valve - Remove
973C Track-Type Loader Powertrain
Synchronizing Valve - Install
973C Track-Type Loader Powertrain
Service Magazine
Special Torque is Now Required for the Plug on the Synchronization Valve Group {3214}
2007/03/05
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Service Magazine
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Disassembly and Assembly
Speed Override and Brake Control - Remove and Install
973C Track-Type Loader Machine Systems
Testing and Adjusting
Cooler Bypass Valve - Test
973C Track-Type Loader Power Train
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Operation and Maintenance Manual
Final Drive Oil - Change
973C Track-Type Loader
Final Drive Oil Level - Check
973C Track-Type Loader
Final Drive Oil Sample - Obtain
973C Track-Type Loader
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Installation Procedure For Welding Hub Assembly On Certain 973C Track-Type Loaders {4050, 4056}
Installation Procedure For Welding Hub Assembly On Certain 973C Track-Type Loaders {4050, 4056}
Technical Information Bulletin
Cracks in the Spindles on Track-Type Loaders{4050, 4056}
Cracks in the Spindles on Track-Type Loaders{4050, 4056}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Final Drive and Parking Brake
973C Track-Type Loader Power Train
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Salvage of Final Drive Carrier Plate forTrack-Type Loaders{0679, 4011, 4050, 4092}
Salvage of Final Drive Carrier Plate forTrack-Type Loaders{0679, 4011, 4050, 4092}
Thermal Spray Procedures for Track Loader - Sprocket Hub {0679, 4050}
Thermal Spray Procedures for Track Loader - Sprocket Hub {0679, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Final Drive and Sprocket - Remove
973C Track-Type Loader Powertrain
Final Drive and Sprocket - Install
973C Track-Type Loader Powertrain
Final Drive and Sprocket - Disassemble
973C Track-Type Loader Powertrain
Final Drive and Sprocket - Assemble
973C Track-Type Loader Powertrain
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Truck sale:

Caterpillar 973C
 
Caterpillar 973C
- track loaders
ZIEGLER CAT
Caterpillar 973C, track loaders, Construction
120,000 
Caterpillar 973C, track loaders, Construction
- track loaders
QUINN COMPANY
Caterpillar 973C RIPPER, Rippers, Construction
5,047 
Caterpillar 973C RIPPER, Rippers, Construction
- Scarifiers
ZIEGLER CAT
Caterpillar 973C, Construction
 
Caterpillar 973C, Construction
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI
Italy
Caterpillar 973C, Construction
20,000 
Caterpillar 973C, Construction
- track loaders
ALTORFER INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.