AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

973C TRACK-TYPE LOADER LDX00001-UP (MACHINE) POWERED BY C9 Engine UNDERCARRIAGE Caterpillar SIS



TRACK LOADER 973C TRACK LOADER LDX
 973C TRACK-TYPE LOADER LDX00001-UP (MACHINE) POWERED BY C9 Engine SEBP4351 973C LDX   (2005)

Parts group 973C:

  For full view, you need register
UNDERCARRIAGE
ADJUSTMENT GP-HYDRAULIC TRACK
ADJUSTMENT GP-HYDRAULIC TRACK
238-9095 ADJUSTMENT GP-HYDRAULIC TRACK
238-9095 ADJUSTMENT GP-HYDRAULIC TRACK
S/N LDX1-UP
PART OF 3W-8561 IDLER GP-FRONT
ADJUSTMENT GP-HYDRAULIC TRACK
239-8170 ADJUSTMENT GP-HYDRAULIC TRACK
239-8170 ADJUSTMENT GP-HYDRAULIC TRACK
S/N LDX1-UP
PART OF 348-3816, 348-3839 CONVERSION GP-MACHINE, 5Q-5625 IDLER GP-FRONT
AN ATTACHMENT
BAR GP-EQUALIZER
BAR GP-EQUALIZER
3W-8423 BAR GP-EQUALIZER
3W-8423 BAR GP-EQUALIZER
S/N LDX1-UP
PART OF 246-8440 UNDERCARRIAGE AR
BAR GP-EQUALIZER
5Q-5628 BAR GP-EQUALIZER
5Q-5628 BAR GP-EQUALIZER -STEEL MILL
S/N LDX1-UP
PART OF 276-8051 UNDERCARRIAGE AR
AN ATTACHMENT
BAR GP-EQUALIZER
5Q-9220 BAR GP-EQUALIZER
5Q-9220 BAR GP-EQUALIZER -WIDE GAUGE
S/N LDX1-UP
PART OF 276-8058 UNDERCARRIAGE AR
AN ATTACHMENT
IDLER GP
ADJUSTMENT GP-HYDRAULIC TRACK
238-9095 ADJUSTMENT GP-HYDRAULIC TRACK
238-9095 ADJUSTMENT GP-HYDRAULIC TRACK
S/N LDX1-UP
PART OF 3W-8561 IDLER GP-FRONT
ADJUSTMENT GP-HYDRAULIC TRACK
239-8170 ADJUSTMENT GP-HYDRAULIC TRACK
239-8170 ADJUSTMENT GP-HYDRAULIC TRACK
S/N LDX1-UP
PART OF 348-3816, 348-3839 CONVERSION GP-MACHINE, 5Q-5625 IDLER GP-FRONT
AN ATTACHMENT
274-9139 GUARD AR-SEAL
274-9139 GUARD AR-SEAL -FINAL DRIVE
S/N LDX1-UP
CANNOT BE USED WITH TRANSFER STATION AR, OR WASTE HANDLER AR
AN ATTACHMENT
240-9422 IDLER GP-FRONT
240-9422 IDLER GP-FRONT -ROTATING BUSHING TRACK
S/N LDX1-UP
PART OF 194-6556 MODIFICATION AR-UNDERCARRIAGE
AN ATTACHMENT
IDLER GP-FRONT
242-0526 IDLER GP-FRONT
242-0526 IDLER GP-FRONT -WASTE HANDLER
S/N LDX1-UP
PART OF 274-9139 GUARD AR-SEAL, 265-7872 UNDERCARRIAGE AR
AN ATTACHMENT
IDLER GP-FRONT
283-9645 IDLER GP-FRONT
283-9645 IDLER GP-FRONT -LH
S/N LDX269-UP
PART OF 3W-8561 IDLER GP-FRONT
IDLER GP-FRONT
283-9646 IDLER GP-FRONT
283-9646 IDLER GP-FRONT -RH
S/N LDX269-UP
PART OF 3W-8561 IDLER GP-FRONT
IDLER GP-FRONT
3W-8561 IDLER GP-FRONT
3W-8561 IDLER GP-FRONT
S/N LDX1-268
PART OF 246-8440 UNDERCARRIAGE AR
IDLER GP-FRONT
3W-8561 IDLER GP-FRONT
3W-8561 IDLER GP-FRONT
S/N LDX269-UP
PART OF 246-8440 UNDERCARRIAGE AR
IDLER GP-FRONT
5Q-5625 IDLER GP-FRONT
5Q-5625 IDLER GP-FRONT -STEEL MILL
S/N LDX1-UP
PART OF 276-8051 UNDERCARRIAGE AR
AN ATTACHMENT
SHAFT GP-TRACK IDLER
185-1359 SHAFT GP-TRACK IDLER
185-1359 SHAFT GP-TRACK IDLER
S/N LDX1-UP
PART OF 5Q-5625 IDLER GP-FRONT
AN ATTACHMENT
PIVOT BAR GP
PIVOT BAR GP
5Q-5552 PIVOT BAR GP
5Q-5552 PIVOT BAR GP
S/N LDX1-UP
PART OF 246-8440 UNDERCARRIAGE AR
PIVOT BAR GP
5Q-9342 PIVOT BAR GP
5Q-9342 PIVOT BAR GP -WIDE GAUGE
S/N LDX1-UP
PART OF 276-8058 UNDERCARRIAGE AR
AN ATTACHMENT
ROLLER GP
ROLLER GP-TRACK CARRIER
1P-8717 ROLLER GP-TRACK CARRIER
1P-8717 ROLLER GP-TRACK CARRIER
S/N LDX1-UP
PART OF 246-8440 UNDERCARRIAGE AR
ROLLER GP-TRACK CARRIER
2P-3514 ROLLER GP-TRACK CARRIER
2P-3514 ROLLER GP-TRACK CARRIER -STEEL MILL
S/N LDX1-UP
PART OF 276-8051 UNDERCARRIAGE AR
AN ATTACHMENT
134-6453 ROLLER GP-TRACK-DOUBLE FLANGE
134-6453 ROLLER GP-TRACK-DOUBLE FLANGE
S/N LDX1-UP
PART OF 246-8440 UNDERCARRIAGE AR
FIELD REPLACEMENT ORDER @@@@@134-6637@@@@@, @@@@@238-7860@@@@@
ROLLER GP-TRACK-DOUBLE FLANGE
134-6637 ROLLER GP-TRACK-DOUBLE FLANGE
134-6637 ROLLER GP-TRACK-DOUBLE FLANGE
S/N LDX1-UP
ROLLER GP-TRACK-DOUBLE FLANGE
238-7860 ROLLER GP-TRACK-DOUBLE FLANGE
238-7860 ROLLER GP-TRACK-DOUBLE FLANGE
S/N LDX1-UP
PART OF 134-6453 ROLLER GP-TRACK-DOUBLE FLANGE
FIELD REPLACEMENT FOR @@@@@134-6453@@@@@
ROLLER GP-TRACK-DOUBLE FLANGE
5Q-7593 ROLLER GP-TRACK-DOUBLE FLANGE
5Q-7593 ROLLER GP-TRACK-DOUBLE FLANGE -STEEL MILL
S/N LDX1-UP
PART OF 276-8051 UNDERCARRIAGE AR
AN ATTACHMENT
134-6452 ROLLER GP-TRACK-SINGLE FLANGE
134-6452 ROLLER GP-TRACK-SINGLE FLANGE
S/N LDX1-UP
PART OF 246-8440 UNDERCARRIAGE AR
FIELD REPLACEMENT ORDER @@@@@134-6636@@@@@, @@@@@238-7861@@@@@, @@@@@323-5925@@@@@
ROLLER GP-TRACK-SINGLE FLANGE
134-6636 ROLLER GP-TRACK-SINGLE FLANGE
134-6636 ROLLER GP-TRACK-SINGLE FLANGE
S/N LDX1-UP
ROLLER GP-TRACK-SINGLE FLANGE
238-7861 ROLLER GP-TRACK-SINGLE FLANGE
238-7861 ROLLER GP-TRACK-SINGLE FLANGE
S/N LDX1-UP
PART OF 134-6452 ROLLER GP-TRACK-SINGLE FLANGE
FIELD REPLACEMENT FOR @@@@@134-6452@@@@@
ROLLER GP-TRACK-SINGLE FLANGE
323-5925 ROLLER GP-TRACK-SINGLE FLANGE
323-5925 ROLLER GP-TRACK-SINGLE FLANGE
S/N LDX1-UP
PART OF 134-6452 ROLLER GP-TRACK-SINGLE FLANGE
FIELD REPLACEMENT FOR @@@@@134-6452@@@@@
ROLLER GP-TRACK-SINGLE FLANGE
5Q-7592 ROLLER GP-TRACK-SINGLE FLANGE
5Q-7592 ROLLER GP-TRACK-SINGLE FLANGE -STEEL MILL
S/N LDX1-UP
PART OF 276-8051 UNDERCARRIAGE AR
AN ATTACHMENT
TRACK ADJUSTER & RECOIL GP
ADJUSTMENT GP-HYDRAULIC TRACK
238-9095 ADJUSTMENT GP-HYDRAULIC TRACK
238-9095 ADJUSTMENT GP-HYDRAULIC TRACK
S/N LDX1-UP
PART OF 3W-8561 IDLER GP-FRONT
ADJUSTMENT GP-HYDRAULIC TRACK
239-8170 ADJUSTMENT GP-HYDRAULIC TRACK
239-8170 ADJUSTMENT GP-HYDRAULIC TRACK
S/N LDX1-UP
PART OF 348-3816, 348-3839 CONVERSION GP-MACHINE, 5Q-5625 IDLER GP-FRONT
AN ATTACHMENT
TRACK GP
LINK AS-TRACK
152-8054 LINK AS-TRACK
152-8054 LINK AS-TRACK -ROTATING BUSHING TRACK
S/N LDX1-UP
SEALED, LUBRICATED
PART OF 170-3822, 170-3824, 237-7323 TRACK GP
AN ATTACHMENT
LINK AS-TRACK
236-8177 LINK AS-TRACK
236-8177 LINK AS-TRACK
S/N LDX1-UP
SEALED & LUBRICATED
PART OF 247-1465, 247-1466, 247-1467, 247-1468, 247-1469, 247-1471 TRACK GP
AN ATTACHMENT
LINK AS-TRACK
291-1612 LINK AS-TRACK
291-1612 LINK AS-TRACK
S/N LDX1-UP
SEALED, LUBRICATED
PART OF 236-8178, 237-9143, 247-1465, 247-1466, 247-1467, 247-1468, 247-1469, 247-1471, 247-1474 TRACK GP
ALSO AN ATTACHMENT
LINK AS-TRACK
291-1614 LINK AS-TRACK
291-1614 LINK AS-TRACK
S/N LDX1-UP
SEALED
PART OF 247-1472, 247-1473, 252-9613, 269-1134 TRACK GP
AN ATTACHMENT
170-3822 TRACK GP
170-3822 TRACK GP -2 REQUIRED
S/N LDX1-UP
500-MM (20-IN) DOUBLE GROUSER SHOE. SEALED, LUBRICATED, ROTATING BUSHING TRACK
FOR USE WITH MODIFICATION AR-UNDERCARRIAGE
AN ATTACHMENT
170-3824 TRACK GP
170-3824 TRACK GP -2 REQUIRED
S/N LDX1-UP
675-MM (27-IN) DOUBLE GROUSER SHOE. SEALED, LUBRICATED, ROTATING BUSHING TRACK
AN ATTACHMENT
236-8178 TRACK GP
236-8178 TRACK GP -2 REQUIRED
S/N LDX1-UP
500-MM (19.7-IN) DOUBLE GROUSER SHOE. SEALED, LUBRICATED
PART OF 246-8440 UNDERCARRIAGE AR
237-7323 TRACK GP
237-7323 TRACK GP -2-REQUIRED
S/N LDX1-UP
830-MM (32.7-IN) DOUBLE GROUSER SHOE. SEALED, LUBRICATED, EXTREME SERVICE, ROTATING BUSHING TRACK
FOR USE WITH WIDE GAUGE UNDERCARRIAGE
AN ATTACHMENT
237-9143 TRACK GP
237-9143 TRACK GP -2 REQUIRED
S/N LDX1-UP
675-MM (26.6-IN) DOUBLE GROUSER SHOE. SEALED, LUBRICATED
AN ATTACHMENT
247-1465 TRACK GP
247-1465 TRACK GP -2 REQUIRED
S/N LDX1-UP
610-MM (24-IN) DOUBLE GROUSER SHOE. SEALED, LUBRICATED
CANNOT BE USED WITH STEEL MILL ARRANGEMENT
AN ATTACHMENT
247-1466 TRACK GP
247-1466 TRACK GP -2-REQUIRED
S/N LDX1-UP
500-MM (19.7-IN) DOUBLE GROUSER SHOE. TRAPEZOIDAL, SEALED, LUBRICATED
CANNOT BE USED WITH STEEL MILL ARRANGEMENT
AN ATTACHMENT
247-1467 TRACK GP
247-1467 TRACK GP -2 REQUIRED
S/N LDX1-UP
675-MM (26.6-IN) DOUBLE GROUSER SHOE. SEALED, LUBRICATED, TRAPEZOIDAL
CANNOT BE USED WITH STEEL MILL ARRANGEMENT
AN ATTACHMENT
247-1468 TRACK GP
247-1468 TRACK GP -2-REQUIRED
S/N LDX1-UP
560-MM (22-IN) SINGLE GROUSER SHOE. EXTREME SERVICE, SEALED, LUBRICATED
CANNOT BE USED WITH STEEL MILL ARRANGEMENT
AN ATTACHMENT
247-1469 TRACK GP
247-1469 TRACK GP -2-REQUIRED
S/N LDX1-UP
510-MM (20.1-IN) SINGLE GROUSER SHOE. TRAPEZOIDAL, SEALED, LUBRICATED, EXTREME SERVICE
Type 1
CANNOT BE USED WITH STEEL MILL ARRANGEMENT
AN ATTACHMENT
TRACK GP
247-1469 TRACK GP
247-1469 TRACK GP -2-REQUIRED
S/N LDX1-UP
510-MM (20.1-IN) SINGLE GROUSER SHOE. TRAPEZOIDAL, SEALED, LUBRICATED, EXTREME SERVICE
Type 2
CANNOT BE USED WITH STEEL MILL ARRANGEMENT
AN ATTACHMENT
247-1471 TRACK GP
247-1471 TRACK GP -2 REQUIRED
S/N LDX1-UP
675-MM (26.6-IN) SINGLE GROUSER SHOE. EXTREME SERVICE, TRAPEZOIDAL, SEALED, LUBRICATED
CANNOT BE USED WITH STEEL MILL ARRANGEMENT
AN ATTACHMENT
247-1472 TRACK GP
247-1472 TRACK GP -2-REQUIRED
S/N LDX1-UP
500-MM (19.7-IN) DOUBLE GROUSER SHOE. NON-LUBRICATED
FOR USE WITH STEEL MILL
AN ATTACHMENT
247-1473 TRACK GP
247-1473 TRACK GP -2-REQUIRED
S/N LDX1-UP
500-MM (19.7-IN) FLAT GROUSER SHOE. SEALED, NON-LUBRICATED
FOR USE WITH STEEL MILL
AN ATTACHMENT
247-1474 TRACK GP
247-1474 TRACK GP -2-REQUIRED, WASTE HANDLING
S/N LDX1-UP
500-MM (19.7-IN) CHOPPING SHOE. SEALED, LUBRICATED
AN ATTACHMENT
252-9613 TRACK GP
252-9613 TRACK GP -2-REQUIRED
S/N LDX1-UP
500-MM (19.7-IN) TRIPLE GROUSER SHOE. SEALED, NON-LUBRICATED
FOR USE WITH STEEL MILL AR
AN ATTACHMENT
269-1134 TRACK GP
269-1134 TRACK GP -2-REQUIRED
S/N LDX1-UP
500-MM (19.7-IN) DOUBLE GROUSER SHOE & FLAT SHOE. SEALED
FOR USE WITH STEEL MILL AR
CANNOT BE USED WITH @@@@@194-6556@@@@@
AN ATTACHMENT
UNDERCARRIAGE GP
194-6556 MODIFICATION AR-UNDERCARRIAGE
194-6556 MODIFICATION AR-UNDERCARRIAGE
S/N LDX1-UP
FOR USE WITH ROTATING BUSHING TRACK
AN ATTACHMENT
246-8440 UNDERCARRIAGE AR
246-8440 UNDERCARRIAGE AR
S/N LDX1-UP
PART OF 246-8434 GENERAL AR
265-7872 UNDERCARRIAGE AR
265-7872 UNDERCARRIAGE AR -WASTE HANDLER
S/N LDX1-UP
PART OF 274-9140 TRANSFER STATION AR, 265-7870, 274-9132 WASTE HANDLING AR
AN ATTACHMENT
276-8051 UNDERCARRIAGE AR
276-8051 UNDERCARRIAGE AR -STEEL MILL
S/N LDX1-UP
PART OF 274-9135 STEEL MILL AR
AN ATTACHMENT
276-8058 UNDERCARRIAGE AR
276-8058 UNDERCARRIAGE AR -WIDE GAUGE
S/N LDX1-UP
PART OF 276-8040 MODIFICATION AR
AN ATTACHMENT
FRAME GP-TRACK ROLLER
FRAME GP-TRACK ROLLER
264-8800 FRAME GP-TRACK ROLLER
264-8800 FRAME GP-TRACK ROLLER
S/N LDX1-UP
PART OF 246-8440 UNDERCARRIAGE AR
FRAME GP-TRACK ROLLER
276-8046 FRAME GP-TRACK ROLLER
276-8046 FRAME GP-TRACK ROLLER -STEEL MILL
S/N LDX1-UP
PART OF 276-8051 UNDERCARRIAGE AR
AN ATTACHMENT
FRAME GP-TRACK ROLLER
276-8057 FRAME GP-TRACK ROLLER
276-8057 FRAME GP-TRACK ROLLER -WIDE GAUGE
S/N LDX1-UP
PART OF 276-8058 UNDERCARRIAGE AR
AN ATTACHMENT
GUARD GP
274-9139 GUARD AR-SEAL
274-9139 GUARD AR-SEAL -FINAL DRIVE
S/N LDX1-UP
CANNOT BE USED WITH TRANSFER STATION AR, OR WASTE HANDLER AR
AN ATTACHMENT
GUARD GP-TRACK GUIDE
188-9736 GUARD GP-TRACK GUIDE
188-9736 GUARD GP-TRACK GUIDE -ROTATING BUSHING TRACK
S/N LDX1-UP
PART OF 194-6556 MODIFICATION AR-UNDERCARRIAGE
AN ATTACHMENT
GUARD GP-TRACK GUIDE
3W-8336 GUARD GP-TRACK GUIDE
3W-8336 GUARD GP-TRACK GUIDE
S/N LDX1-UP
PART OF 246-8440 UNDERCARRIAGE AR
GUARD GP-TRACK ROLLER
192-4072 GUARD GP-TRACK ROLLER
192-4072 GUARD GP-TRACK ROLLER -ROTATING BUSHING TRACK
S/N LDX1-UP
AN ATTACHMENT
GUARD GP-TRACK ROLLER
3W-8545 GUARD GP-TRACK ROLLER
3W-8545 GUARD GP-TRACK ROLLER
S/N LDX1-UP
CANNOT BE USED WITH MODIFICATION AR-UNDERCARRIAGE
AN ATTACHMENT

Information:

(For parts list, see above)

Operation and Maintenance Manual
Oil Filter - Inspect
973C Track-Type Loader
Recoil Piston - Lubricate
973C Track-Type Loader
Disassembly and Assembly
Track Adjuster - Disassemble
973C Track-Type Loader Powertrain
Track Adjuster - Assemble
973C Track-Type Loader Powertrain
Track Adjuster - Remove
973C Track-Type Loader Powertrain
Track Adjuster - Install
973C Track-Type Loader Powertrain
Service Magazine
Cleanliness Around the Fill Valve Is Important Before Adjusting Track Tension for Certain Track-Type Loaders {4157}
2013/12/23
Operation and Maintenance Manual
Equalizer Bar Pins - Inspect
973C Track-Type Loader
Equalizer Bar Pins - Lubricate
973C Track-Type Loader
Specifications
Equalizer Bar
973C Track-Type Loader Machine Systems
Disassembly and Assembly
Equalizer Bar - Remove
973C Track-Type Loader Powertrain
Equalizer Bar - Install
973C Track-Type Loader Powertrain
Equalizer Bar - Disassemble
973C Track-Type Loader Powertrain
Equalizer Bar - Assemble
973C Track-Type Loader Powertrain
Operation and Maintenance Manual
Idler Swing Link - Lubricate
973C Track-Type Loader
Specifications
Front Idler and Recoil Spring
973C Track-Type Loader Machine Systems
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Idler Oil Fill Volume {4159, 4159}
Idler Oil Fill Volume {4159, 4159}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Duo-Cone Seal Assembly and Installation Procedure for the 963 and 973 Track-Type Loaders {4150, 4159, 7555, 7561}
Duo-Cone Seal Assembly and Installation Procedure for the 963 and 973 Track-Type Loaders {4150, 4159, 7555, 7561}
Disassembly and Assembly Procedures for Idlers of Track-Type Loaders {4159}
Disassembly and Assembly Procedures for Idlers of Track-Type Loaders {4159}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Disassembly and Assembly
Front Idler and Yoke - Remove
973C Track-Type Loader Powertrain
Front Idler and Yoke - Install
973C Track-Type Loader Powertrain
Service Magazine
Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10
Cleanliness Around the Fill Valve Is Important Before Adjusting Track Tension for Certain Track-Type Loaders {4157}
2013/12/23
Undercarriage Reconditioning Bulletin
Oil Volumes for Track Link Assemblies {4169}
Oil Volumes for Track Link Assemblies {4169}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Reuse And Salvage Guidelines
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Service Magazine
Improvements To The Hybrid Track Link Increases The Durability {4169, 4171}
2007/12/31
Low Volume Track Master Links Are Replaced On Certain Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Low Volume Track Master Links Are Replaced On Certain Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Nut Installation Orientation on Certain 973 Track-Type Loaders and D7G Track Type-Tractors {4169, 4170, 4171}
Track Nut Installation Orientation on Certain 973 Track-Type Loaders and D7G Track Type-Tractors {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Operation and Maintenance Manual
Pivot Shaft Oil Level - Check
973C Track-Type Loader
Technical Information Bulletin
Pivot Shaft Seal Leaks On D6K, D6N, And Track-Type Loaders{4153}
Pivot Shaft Seal Leaks On D6K, D6N, And Track-Type Loaders{4153}
Specifications
Pivot Bar
973C Track-Type Loader Machine Systems
Reuse And Salvage Guidelines
Thermal Spray Procedures for Track Loader Pivot Shaft{0599, 0679, 4153}
Thermal Spray Procedures for Track Loader Pivot Shaft{0599, 0679, 4153}
Specifications
Track Rollers
973C Track-Type Loader Machine Systems
Roller Placement
973C Track-Type Loader Machine Systems
Track Carrier Rollers
973C Track-Type Loader Machine Systems
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Carrier Roller Oil Fill Volume {4154}
Carrier Roller Oil Fill Volume {4154}
Reconditioning Dimensions for Track Rollers {4154, 4180}
Reconditioning Dimensions for Track Rollers {4154, 4180}
Carrier Roller Disassembly and Assembly Procedures {4154}
Carrier Roller Disassembly and Assembly Procedures {4154}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Snap Ring Roller Disassembly and Assembly Procedures {0729, 4150, 4180, 4181}
Snap Ring Roller Disassembly and Assembly Procedures {0729, 4150, 4180, 4181}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Disassembly and Assembly
Track Roller - Remove
973C Track-Type Loader Powertrain
Track Roller - Install
973C Track-Type Loader Powertrain
Track Carrier Roller - Remove
973C Track-Type Loader Powertrain
Track Carrier Roller - Install
973C Track-Type Loader Powertrain
Service Magazine
Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10
Improved Track Carrier Roller Is Now Used on Certain Cat Machines {4154}
2012/12/11
Track-Type Tractor Track Roller Cap Bolt Torque Procedure And Re-Use Guidelines {4180}
2015/05/11
Undercarriage Reconditioning Bulletin
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Disassembly and Assembly
Recoil Spring - Remove
973C Track-Type Loader Powertrain
Recoil Spring - Install
973C Track-Type Loader Powertrain
Operation and Maintenance Manual
Track - Check/Adjust
973C Track-Type Loader
Specifications
Front Idler and Recoil Spring
973C Track-Type Loader Machine Systems
Service Magazine
Cleanliness Around the Fill Valve Is Important Before Adjusting Track Tension for Certain Track-Type Loaders {4157}
2013/12/23
Operation and Maintenance Manual
Track Pins - Inspect
973C Track-Type Loader
Tracks
973C Track-Type Loader
Track - Check/Adjust
973C Track-Type Loader
Technical Information Bulletin
Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Specifications
Front Idler and Recoil Spring
973C Track-Type Loader Machine Systems
Track
973C Track-Type Loader Machine Systems
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Undercarriage Reconditioning Bulletin
Oil Volumes for Track Link Assemblies {4169}
Oil Volumes for Track Link Assemblies {4169}
Shop Repair Procedure for Non-PPR Sealed and Lubricated Track {4170}
Shop Repair Procedure for Non-PPR Sealed and Lubricated Track {4170}
Track Data Charts {0372, 0374, 4170}
Track Data Charts {0372, 0374, 4170}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Snap Ring Roller Disassembly and Assembly Procedures {0729, 4150, 4180, 4181}
Snap Ring Roller Disassembly and Assembly Procedures {0729, 4150, 4180, 4181}
Duo-Cone Seal Assembly and Installation Procedure for the 963 and 973 Track-Type Loaders {4150, 4159, 7555, 7561}
Duo-Cone Seal Assembly and Installation Procedure for the 963 and 973 Track-Type Loaders {4150, 4159, 7555, 7561}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Reuse And Salvage Guidelines
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Disassembly and Assembly
Track - Adjust
973C Track-Type Loader Powertrain
Track - Separate
973C Track-Type Loader Powertrain
Track - Connect
973C Track-Type Loader Powertrain
Service Magazine
Low Volume Track Master Links Are Replaced On Certain Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Low Volume Track Master Links Are Replaced On Certain Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Chopper Track Shoes are Canceled on Certain Track-Type Tractors and Track-Type Loaders {4170}
Chopper Track Shoes are Canceled on Certain Track-Type Tractors and Track-Type Loaders {4170}
Track Nut Installation Orientation on Certain 973 Track-Type Loaders and D7G Track Type-Tractors {4169, 4170, 4171}
Track Nut Installation Orientation on Certain 973 Track-Type Loaders and D7G Track Type-Tractors {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
General Duty Track Replaces Hybrid Track on Certain 973 Track-Type Loaders and D7 Track-Type Tractors {4169, 4170, 4171}
General Duty Track Replaces Hybrid Track on Certain 973 Track-Type Loaders and D7 Track-Type Tractors {4169, 4170, 4171}
Systems Operation
Undercarriage
973C Track-Type Loader Power Train
Undercarriage Reconditioning Bulletin
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Foreword {0374, 4150, 7000, 7590, 7950}
Foreword {0374, 4150, 7000, 7590, 7950}
Introduction {0374, 4150, 7000, 7590, 7950}
Introduction {0374, 4150, 7000, 7590, 7950}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Training Materials {0314, 0374, 4150}
Training Materials {0314, 0374, 4150}
Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}
Snap Ring Roller Disassembly and Assembly Procedures {0729, 4150, 4180, 4181}
Snap Ring Roller Disassembly and Assembly Procedures {0729, 4150, 4180, 4181}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reuse And Salvage Guidelines
Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}
Undercarriage Reconditioning Bulletin
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Truck Engine News
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/01
Tool Operating Manual
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Undercarriage Reconditioning Bulletin
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Welding Wire and Flux {0679, 4150, 7950}
Welding Wire and Flux {0679, 4150, 7950}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
Snap Ring Roller Disassembly and Assembly Procedures {0729, 4150, 4180, 4181}
Snap Ring Roller Disassembly and Assembly Procedures {0729, 4150, 4180, 4181}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Specifications
Track Roller Frame
973C Track-Type Loader Machine Systems
Undercarriage Reconditioning Bulletin
Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}
Disassembly and Assembly
Track Roller Frame - Install
973C Track-Type Loader Powertrain
Track Roller Frame - Remove
973C Track-Type Loader Powertrain
Special Instruction
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Magazine
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Truck sale:

Caterpillar 973C
 
Caterpillar 973C
- track loaders
ZIEGLER CAT
Caterpillar 973C, track loaders, Construction
120,000 
Caterpillar 973C, track loaders, Construction
- track loaders
QUINN COMPANY
Caterpillar 973C RIPPER, Rippers, Construction
5,047 
Caterpillar 973C RIPPER, Rippers, Construction
- Scarifiers
ZIEGLER CAT
Caterpillar 973C, Construction
 
Caterpillar 973C, Construction
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI
Italy
Caterpillar 973C, Construction
20,000 
Caterpillar 973C, Construction
- track loaders
ALTORFER INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.