315-5567 ENGINE AR-CORE S/N THY4026-UP 188 BRAKE KW (252 BHP) AT 1300 RPM PART OF 317-0789 ENGINE AR, 315-5566 ENGINE AR-PRIMARY 973C

Part No	Qty	Parts name
242-0674 Y	[1]	CAMSHAFT GP
188-3826 Y	[1]	COOLER GP-ENGINE OIL
211-9120 Y	[1]	COVER GP-FRONT HOUSING
164-6148 Y	[1]	CRANKSHAFT GP
161-3406 Y	[1]	CYLINDER BLOCK GP
242-0672 Y	[1]	CYLINDER HEAD GP
213-4363 Y	[1]	FASTENER GP-CYLINDER HEAD
205-1321 Y	[1]	GEAR GP-FRONT
245-3260 Y	[1]	HOUSING GP-FRONT
265-1400 Y	[6]	PISTON & ROD GP
195-8098 Y	[1]	PUMP GP-ENGINE OIL
267-3362 Y	[1]	PUMP GP-FUEL INJECTION
258-8745 Y	[1]	PUMP GP-UNIT INJECTOR HYD
257-9376 Y	[1]	TURBOCHARGER GP
242-0447 Y	[1]	VALVE MECHANISM GP
314-9734	[1]	ELECTRONICS GP-ENGINE RATINGS
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP43510021

398-0722: ENGINE AR-CORE

ENGINE AR-CORE

398-0722 ENGINE AR-CORE
S/N TXD1431-UP; THY1-UP
PART OF 398-0725, 398-0727 ENGINE AR
AN ATTACHMENT

i04890577 SEBP4351

For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
242-0674 Y	[1]	CAMSHAFT GP
164-6148 Y	[1]	CRANKSHAFT GP
161-3406 Y	[1]	CYLINDER BLOCK GP
384-5590 Y	[1]	CYLINDER HEAD GP
213-4363 Y	[1]	FASTENER GP-CYLINDER HEAD
205-1321 Y	[1]	GEAR GP-FRONT
265-1400 Y	[6]	PISTON & ROD GP
195-8098 Y	[1]	PUMP GP-ENGINE OIL
267-3361 Y	[6]	PUMP GP-FUEL INJECTION
359-2221 Y	[1]	PUMP GP-UNIT INJECTOR HYD
211-1812 Y	[1]	PUMP GP-WATER
231-1978 Y	[1]	SENSOR GP-ENGINE
242-0447 Y	[1]	VALVE MECHANISM GP
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP43510022

242-9561: ENGINE AR-PRIMARY

ENGINE AR-PRIMARY

242-9561 ENGINE AR-PRIMARY
S/N THY1-UP
PART OF 253-8097 ENGINE AR
ALSO AN ATTACHMENT

i03811709 SEBP4351

For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
242-9565 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
246-3557 Y	[1]	COVER GP-CYLINDER BLOCK
118-1727 Y	[1]	COVER GP-FRONT HOUSING (ACCESSORY DRIVE)
222-1783 Y	[1]	COVER GP-VALVE MECHANISM
211-8041 Y	[1]	DAMPER GP
		S/N THY1-161
243-1046 Y	[1]	DAMPER & PULLEY GP
		S/N THY162-UP
239-6932 Y	[1]	DRAIN GP-ENGINE OIL
		S/N THY1-161
278-2492 Y	[1]	DRAIN GP-ENGINE OIL
		S/N THY162-UP
210-8550 Y	[1]	DRIVE GP-WATER PUMP
		S/N THY1-161
246-0599 Y	[1]	DRIVE GP-WATER PUMP
		S/N THY162-UP
246-0596 Y	[1]	ELBOW GP-AIR INLET
242-9562 Y	[1]	ENGINE AR-CORE
222-2409 Y	[1]	FASTENER GP-DAMPER & PULLEY
		S/N THY1-161
116-4556 Y	[1]	FASTENER GP-FRONT HOUSING
219-8681 Y	[1]	FASTENER GP-FRONT COVER
236-7315 Y	[1]	FASTENER GP-VALVE COVER
		S/N THY162-UP
233-0423 Y	[1]	FASTENER GP-VALVE COVER BASE
230-4118 Y	[1]	FILLER GP-ENGINE OIL
263-6292 Y	[1]	FILTER GP-ENGINE OIL
		S/N THY1-161
207-6897 Y	[1]	FILTER GP-ENGINE OIL
		S/N THY162-UP
197-7401 Y	[1]	FLYWHEEL GP
187-3077 Y	[1]	FUMES DISPOSAL GP
		-OR-
290-1437 Y	[1]	FUMES DISPOSAL GP
241-3719 Y	[1]	FUMES DISPOSAL GP
196-5499 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
243-1037 Y	[1]	HOUSING GP-FLYWHEEL
		S/N THY1-161
257-5860 Y	[1]	HOUSING GP-FLYWHEEL
		S/N THY162-UP
259-5715 Y	[1]	LIFTING GP-ENGINE
198-1319 Y	[1]	LINES GP-ENGINE OIL
243-1036 Y	[1]	LINES GP-FUEL FILTER
243-1048 Y	[1]	LINES GP-TURBOCHARGER OIL
165-4461 Y	[1]	HOUSING & REGULATOR GP (WATER TEMPERATURE REGULATOR)
		S/N THY1-161
257-5866 Y	[1]	LINES GP-WATER
		S/N THY162-UP
165-4445 Y	[1]	MANIFOLD GP-EXHAUST
211-2029 Y	[1]	MOUNTING GP-ALTERNATOR
		S/N THY1-161
246-0600 Y	[1]	MOUNTING GP-ALTERNATOR
		S/N THY162-UP
187-3966 Y	[1]	MOUNTING GP-FAN DRIVE
		S/N THY1-161
246-0598 Y	[1]	MOUNTING GP-FAN DRIVE
		S/N THY162-UP
238-1118 Y	[1]	PAN GP-OIL
		S/N THY1-161
165-4459 Y	[1]	PAN GP-OIL
		S/N THY162-UP
252-1567 Y	[1]	PLUG GP-ENGINE
205-4013 Y	[1]	PLUG GP-WATER LINES
215-3673 Y	[1]	PULLEY GP-CRANKSHAFT
		S/N THY1-161
246-0602 Y	[1]	PULLEY GP-CRANKSHAFT
		S/N THY162-UP
211-1812 Y	[1]	PUMP GP-WATER
178-3899 Y	[1]	SEAL GP-CRANKSHAFT
231-1978 Y	[1]	SENSOR GP-ENGINE
196-5493 Y	[1]	SUPPORT GP-ENGINE
198-0921 Y	[1]	VALVE GP-FLUID SAMPLING
242-9566 Y	[1]	WIRING GP-ELECTRONIC CONTROL

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
Y		SEPARATE ILLUSTRATION

#SEBP43510023

315-5566: ENGINE AR-PRIMARY

ENGINE AR-PRIMARY

315-5566 ENGINE AR-PRIMARY
S/N THY4026-UP
188 BRAKE KW (252 BHP) AT 2000 RPM
PART OF 301-2770 ENGINE AR
FIELD REPLACEMENT ORDER @@@@@317-0789@@@@@

i02988881 SEBP4351

For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
242-9565 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
246-3557 Y	[1]	COVER GP-CYLINDER BLOCK
118-1727 Y	[1]	COVER GP-FRONT HOUSING (ACCESSORY DRIVE)
222-1783 Y	[1]	COVER GP-VALVE MECHANISM
316-2486 Y	[1]	DAMPER & PULLEY GP
278-2492 Y	[1]	DRAIN GP-ENGINE OIL
246-0599 Y	[1]	DRIVE GP-WATER PUMP
246-0596 Y	[1]	ELBOW GP-AIR INLET
315-5567 Y	[1]	ENGINE AR-CORE
219-8681 Y	[1]	FASTENER GP-FRONT COVER
116-4556 Y	[1]	FASTENER GP-FRONT HOUSING
236-7315 Y	[1]	FASTENER GP-VALVE COVER
233-0423 Y	[1]	FASTENER GP-VALVE COVER BASE
230-4118 Y	[1]	FILLER GP-ENGINE OIL
207-6897 Y	[1]	FILTER GP-ENGINE OIL
197-7401 Y	[1]	FLYWHEEL GP
241-3719 Y	[1]	FUMES DISPOSAL GP
290-1437 Y	[1]	FUMES DISPOSAL GP
196-5499 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
257-5860 Y	[1]	HOUSING GP-FLYWHEEL
259-5715 Y	[1]	LIFTING GP-ENGINE
198-1319 Y	[1]	LINES GP-ENGINE OIL
243-1036 Y	[1]	LINES GP-FUEL FILTER
243-1048 Y	[1]	LINES GP-TURBOCHARGER OIL
257-5866 Y	[1]	LINES GP-WATER
165-4445 Y	[1]	MANIFOLD GP-EXHAUST
246-0600 Y	[1]	MOUNTING GP-ALTERNATOR
246-0598 Y	[1]	MOUNTING GP-FAN DRIVE
165-4459 Y	[1]	PAN GP-OIL
252-1567 Y	[1]	PLUG GP-ENGINE
205-4013 Y	[1]	PLUG GP-WATER LINES
246-0602 Y	[1]	PULLEY GP-CRANKSHAFT
211-1812 Y	[1]	PUMP GP-WATER
178-3899 Y	[1]	SEAL GP-CRANKSHAFT
231-1978 Y	[1]	SENSOR GP-ENGINE
196-5493 Y	[1]	SUPPORT GP-ENGINE
198-0921 Y	[1]	VALVE GP-FLUID SAMPLING
242-9566 Y	[1]	WIRING GP-ELECTRONIC CONTROL

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
Y		SEPARATE ILLUSTRATION

#SEBP43510024

246-8438: INSTALLATION AR-ENGINE

INSTALLATION AR-ENGINE

246-8438 INSTALLATION AR-ENGINE
S/N LDX1-UP
PART OF 246-8434 GENERAL AR

i02288375 SEBP4351

For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
280-1874 Y	[1]	AIR CLEANER GP
219-6339 Y	[1]	DRAIN GP-ENGINE OIL
278-8761 Y	[1]	DRIVE GP-FAN
259-2300 Y	[1]	FAN GP-BLOWER
277-9095 Y	[1]	FILTER GP-ENGINE OIL
280-1875 Y	[1]	LINES GP-AIR
259-2303 Y	[1]	LINES GP-TURBOCHARGER AIR
259-2299 Y	[1]	LINES GP-WATER
193-7826 Y	[1]	MOUNTING GP-ENGINE & XMSN
261-2162 Y	[1]	MOUNTING GP-RAD & XMSN COOLER
259-2304 Y	[1]	MUFFLER GP
278-0840 Y	[1]	PULLEY GP-FAN
258-2159 Y	[1]	RADIATOR GP
277-6881 Y	[1]	STARTING AID GP-ETHER
266-0400 Y	[1]	STARTING MOTOR GP-ELECTRIC
218-0593 Y	[1]	PUMP GP-FUEL PRM & WATER SEP
Y		SEPARATE ILLUSTRATION

#SEBP43510025

242-0674: CAMSHAFT GP

CAMSHAFT GP

242-0674 CAMSHAFT GP
S/N TXD1431-UP; THY1-UP
PART OF 242-9562, 315-5567, 398-0722 ENGINE AR-CORE
ALSO AN ATTACHMENT

i02288687 SEBP4351

For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	107-7694	[1]	PLATE-THRUST
2.	242-0673	[1]	CAMSHAFT AS
2A.	1B-8705	[1]	KEY-WOODRUFF
2B.	224-3247	[1]	GEAR (100-TEETH)
3.	6V-3940 M	[2]	BOLT (M8X1.25X25-MM)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP43510026

445-4273: CASE GP-FAN CLUTCH

CASE GP-FAN CLUTCH

445-4273 CASE GP-FAN CLUTCH
S/N LDX375-UP
PART OF 251-3600 CLUTCH GP-FAN

i05857186 SEBP4351

For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9U-8886	[2]	RING-SEAL
2.	251-3601	[1]	CASE
3.	251-3614	[1]	TUBE AS
4.	251-3619	[1]	SHAFT AS
	9W-0718	[1]	PLUG
	163-9091	[2]	PLUG
5.	251-3623	[1]	SEAL
6.	6V-5203	[1]	RING-RETAINING
7.	2D-5658	[1]	BALL BEARING
8.	360-5603	[1]	SEAL-LIP TYPE
9.	334-5131	[1]	PLUG AS
	9S-4191	[1]	PLUG (9/16-18-THD)
	3J-1907	[1]	SEAL-O-RING
10.	420-4721	[1]	PLUG AS
	9S-4182	[1]	PLUG (7/16-20-THD)
	3J-7354	[1]	SEAL-O-RING
11.	274-4556	[1]	PLUG AS
	9S-4185	[1]	PLUG (3/4-16-THD)
	8L-2786	[1]	SEAL-O-RING
12.	1K-6984	[1]	RING-RETAINING

#SEBP43510027

251-3600: CLUTCH GP-FAN

CLUTCH GP-FAN

251-3600 CLUTCH GP-FAN
S/N LDX375-UP
PART OF 273-5613 DRIVE GP-FAN
FIELD REPLACEMENT ORDER @@@@@500-5015@@@@@

i02979316 SEBP4351

For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	351-6987 Y	[1]	SENSOR GP-SPEED (FAN CLUTCH)
2.	445-4273 Y	[1]	CASE GP-FAN CLUTCH
3.	445-4274 Y	[1]	CLUTCH GP-FAN

	9S-3263 BF		COMPOUND-THREAD LOCK
	B		USE AS REQUIRED
	F		NOT SHOWN
	Y		SEPARATE ILLUSTRATION

#SEBP43510028

445-4274: CLUTCH GP-FAN

CLUTCH GP-FAN

445-4274 CLUTCH GP-FAN
S/N LDX375-UP
PART OF 251-3600 CLUTCH GP-FAN

i05857193 SEBP4351

For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9W-9436	[1]	RING-SEAL
2.	8T-1742	[1]	RING-RETAINING (INTERNAL)
3.	251-3602	[1]	COVER
4.	251-3611	[1]	PISTON
5.	251-3612	[1]	PISTON
6.	251-3613	[1]	RETAINER
7.	251-3617	[1]	RETAINER
8.	251-3618	[6]	DISC-FRICTION
9.	251-3620	[1]	SLEEVE AS (MAGNET)
10.	251-3623	[1]	SEAL
11.	251-3624	[1]	SEAL
12.	251-3625	[1]	SPRING-WAVE
13.	360-5603	[1]	SEAL-LIP TYPE
14.	300-8547	[1]	FLANGE AS-DRIVE
15.	032-9882	[1]	SEAL-O-RING
16.	095-7949	[1]	RING-RETAINING
17.	099-0822 M	[2]	BOLT-SOCKET HEAD (M5X0.8X10-MM)
18.	2K-2939	[1]	SEAL-O-RING
19.	6V-5217 M	[8]	BOLT (M8X1.25X20-MM)
20.	6Y-0040	[1]	RING
21.	6Y-8043	[6]	PLATE
22.	7F-2742	[1]	BALL BEARING
23.	8T-0707	[1]	RING-RETAINING (INTERNAL)
	M		METRIC PART

#SEBP43510029

246-3557: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

246-3557 COVER GP-CYLINDER BLOCK -CRANKCASE BREATHER
S/N TXD1431-UP; THY1-UP
PART OF 317-0789 ENGINE AR, 242-9561, 315-5566 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT

i02287618 SEBP4351

2463557 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	205-5285	[1]	GASKET (CRANKCASE BREATHER COVER)
2.	215-4441	[1]	COVER
3.	240-0041	[1]	BREATHER AS (CRANKCASE)
4.	3E-8005 M	[1]	BOLT (M8X1.25X160-MM)
5.	6V-3918 M	[2]	BOLT (M8X1.25X50-MM)
6.	6V-3940 M	[8]	BOLT (M8X1.25X25-MM)
7.	9F-4446	[1]	SEAL-O-RING (CRANKCASE BREATHER)
8.	9M-1974	[11]	WASHER-HARD (8.8X16X2-MM THK)
9.	5N-4185	[1]	WASHER-SPECIAL
10.	104-6385 M	[1]	STUD (M8X1.25-THD)
	M		METRIC PART

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Retirement of the Paper Version of Truck Engine News {1000}
2007/02/01

Retirement of the Paper Version for Truck Engine News {0374, 7006}
2007/08/01

Unauthorized Engine Modification {1000}
2007/09/01

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/28

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS CERTAIN 140M, AND 160M MOTOR GRADERS, 330D, 336D, 336D2, 340D, AND 340D2 EXCAVATORS, 511, 521, 521B 522, 522B, 532, 541, 541B, 552, AND 552B TRACK FELLER BUNCHERS, 627G, AND 637G WHEEL TRACTOR SCRAPERS, 814F WHEEL DOZERS, 815F SOIL COMPACTORS, 816F LANDFILL COMPACTORS, 973C, AND 973D TRACK-TYPE LOADERS, D6R, D6T, AND D7R TRACK-TYPE TRACTORS, MH3049 AND MH3059 MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS CERTAIN 140M, AND 160M MOTOR GRADERS, 330D, 336D, 336D2, 340D, AND 340D2 EXCAVATORS, 511, 521, 521B 522, 522B, 532, 541, 541B, 552, AND 552B TRACK FELLER BUNCHERS, 627G, AND 637G WHEEL TRACTOR SCRAPERS, 814F WHEEL DOZERS, 815F SOIL COMPACTORS, 816F LANDFILL COMPACTORS, 973C, AND 973D TRACK-TYPE LOADERS, D6R, D6T, AND D7R TRACK-TYPE TRACTORS, MH3049 AND MH3059 MATERIAL HANDLERS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SYSTEMS ON CERTAIN TRACK-TYPE TRACTORS AND TRACK-TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SYSTEMS ON CERTAIN TRACK-TYPE TRACTORS AND TRACK-TYPE LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Engine Design
C9 Engines for Caterpillar Built Machines

Tool Operating Manual

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Service Letter-China

Service Letter-Asia

Systems Operation

General Information
C9 Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

CAT REMAN ANNOUNCES SHORT BLOCK OPTIONS FOR CAT� C9, C11, AND C13 MACHINE APPLICATIONS
CAT REMAN ANNOUNCES SHORT BLOCK OPTIONS FOR CAT� C9, C11, AND C13 MACHINE APPLICATIONS

CAT REMAN ANNOUNCES ADDITIONAL C9 ENGINE OPTIONS FOR CAT� MACHINE APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL C9 ENGINE OPTIONS FOR CAT� MACHINE APPLICATIONS

ENGINE OVERHAUL KITS FOR C-9 MACHINE ENGINES
ENGINE OVERHAUL KITS FOR C-9 MACHINE ENGINES

CAT REMAN ANNOUNCES C9 HIGH EFFICIENCY PUMP ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS
CAT REMAN ANNOUNCES C9 HIGH EFFICIENCY PUMP ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS

Service Letter-APD

Technical Analysis

Technical Analysis (TA1) Visual Inspection for Track-Type Loaders {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Loaders {0372, 1000, 7000, 753S, 7565}

Troubleshooting

Low Engine Oil Pressure
C7 and C9 Engines for Caterpillar Built Machines

Engine Stalls at Low RPM
C7 and C9 Engines for Caterpillar Built Machines

Excessive Black Smoke
C7 and C9 Engines for Caterpillar Built Machines

Engine Misfires, Runs Rough or Is Unstable
C7 and C9 Engines for Caterpillar Built Machines

Engine Vibration
C7 and C9 Engines for Caterpillar Built Machines

Excessive Fuel Consumption
C7 and C9 Engines for Caterpillar Built Machines

Engine Cranks but Will Not Start
C7 and C9 Engines for Caterpillar Built Machines

Excessive White Smoke
C7 and C9 Engines for Caterpillar Built Machines

E362 Engine Overspeed
C7 and C9 Engines for Caterpillar Built Machines

Engine Will Not Crank
C7 and C9 Engines for Caterpillar Built Machines

Low Power/Poor or No Response to Throttle
C7 and C9 Engines for Caterpillar Built Machines

Poor Acceleration or Response
C7 and C9 Engines for Caterpillar Built Machines

Service Magazine

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Updated Engine Diagnostic Publications for Certain C7 and C9 ACERT Powered Machines Is Available {1000, 1250, 1450}
2011/09/20

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Cat® Reman Announces the Availability of Remanufactured Engine Arrangements for Certain Machine Applications {1000}
2015/05/29

Cat® Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/21

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/24

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 973C :

242-9562 ENGINE AR-CORE

274-9132 WASTE HANDLING AR

265-7870 WASTE HANDLING AR

398-0722 ENGINE AR-CORE

242-9561 ENGINE AR-PRIMARY

315-5566 ENGINE AR-PRIMARY

246-8438 INSTALLATION AR-ENGINE

242-0674 CAMSHAFT GP

445-4273 CASE GP-FAN CLUTCH

251-3600 CLUTCH GP-FAN

445-4274 CLUTCH GP-FAN

Truck sale:

Caterpillar 973C
- track loaders
ZIEGLER CAT

120,000

Caterpillar 973C, track loaders, Construction
- track loaders
QUINN COMPANY

5,047

Caterpillar 973C RIPPER, Rippers, Construction
- Scarifiers
ZIEGLER CAT

Caterpillar 973C, Construction
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI
Italy

20,000

Caterpillar 973C, Construction
- track loaders
ALTORFER INC.