AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

242-0526 IDLER GP-FRONT -WASTE HANDLER S/N LDX1-UP PART OF 274-9139 GUARD AR-SEAL, 265-7872 UNDERCARRIAGE AR AN ATTACHMENT 973C


UNDERCARRIAGE
IDLER GP
TRACK GP

TRACK LOADER 973C TRACK LOADER LDX
 973C TRACK-TYPE LOADER LDX00001-UP (MACHINE) POWERED BY C9 Engine SEBP4351 973C LDX   (2005)

UNDERCARRIAGE

IDLER GP
274-9139 GUARD AR-SEAL
240-9422 IDLER GP-FRONT
IDLER GP-FRONT
242-0526 IDLER GP-FRONT
IDLER GP-FRONT
283-9645 IDLER GP-FRONT
IDLER GP-FRONT
283-9646 IDLER GP-FRONT
IDLER GP-FRONT
3W-8561 IDLER GP-FRONT
 

#SEBP43510400
 

242-0526: IDLER GP-FRONT

242-0526 IDLER GP-FRONT -WASTE HANDLER
S/N LDX1-UP
PART OF 274-9139 GUARD AR-SEAL, 265-7872 UNDERCARRIAGE AR
AN ATTACHMENT
i02013239 SEBP4351
2420526 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5Q-5803 [2] LINK AS  
    (EACH INCLUDES)
  3W-8239 [1] SLEEVE-WEAR  
2. 5Q-5804 [2] LINK AS  
    (EACH INCLUDES)
  3W-8239 [1] SLEEVE-WEAR  
3. 277-4491 [2] IDLER AS  
 

#SEBP43510401
 

283-9645: IDLER GP-FRONT

283-9645 IDLER GP-FRONT -LH
S/N LDX269-UP
PART OF 3W-8561 IDLER GP-FRONT
i02736772 SEBP4351
2839645 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 3P-8432 [2] BUSHING AS-IDLER  
    (EACH INCLUDES)
  9B-2289 [2] PIN  
3. 3W-8238 [2] CAP  
4. 3W-8679 [1] YOKE AS  
  8G-0010 [2] BUSHING  
5. 5M-5000 [2] LOCK-PIN  
6. 6Y-0473 [1] PLUG-CLEAR  
7. 7G-4332 [1] STOPPER  
8. 7P-4777 [2] PIN  
9. 8E-9562 [1] SHAFT-TRACK IDLER  
10. 8Y-5859 [1] LINK AS  
  3W-8239 [1] SLEEVE-WEAR  
11. 8Y-5861 [1] LINK AS  
  3W-8239 [1] SLEEVE-WEAR  
12. 9W-1060 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  8H-2229 [1] SEAL-RING  
  9W-1058 [1] RING  
13. 377-2989 [1] IDLER AS  
14. 249-5500 [1] GUARD AS  
  3W-8240 [2] BEARING  
15. 249-5501 [1] GUARD AS  
  3W-8240 [2] BEARING  
16. 3W-8241 [4] SPRING  
17. 4H-9105 [2] SEAL-O-RING  
18. 7K-9201 [4] SEAL-LIP TYPE  
19. 7K-9211 [4] SEAL-LIP TYPE  
20. 7X-0310 [2] BOLT (7/16-14X2-IN)  
21. 7X-0563 [2] WASHER-HARD (12X35X8-MM THK)  
22. 8T-4133 M [2] NUT (M10X1.5-THD)  
23. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
24. 8T-4198 M [2] BOLT (M10X1.5X100-MM)  
25. 8T-4896 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
26. 9B-7237 [12] BOLT (3/8-16X1.25-IN)  
  M   METRIC PART
 

#SEBP43510402
 

283-9646: IDLER GP-FRONT

283-9646 IDLER GP-FRONT -RH
S/N LDX269-UP
PART OF 3W-8561 IDLER GP-FRONT
i02736774 SEBP4351
2839646 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 3P-8432 [2] BUSHING AS-IDLER  
    (EACH INCLUDES)
  9B-2289 [2] PIN  
3. 3W-8238 [2] CAP  
4. 3W-8679 [1] YOKE AS  
  8G-0010 [2] BUSHING  
5. 5M-5000 [2] LOCK-PIN  
6. 6Y-0473 [1] PLUG-CLEAR  
7. 7G-4332 [1] STOPPER  
8. 7P-4777 [2] PIN  
9. 8E-9562 [1] SHAFT-TRACK IDLER  
10. 8Y-5859 [1] LINK AS  
  3W-8239 [1] SLEEVE-WEAR  
11. 8Y-5861 [1] LINK AS  
  3W-8239 [1] SLEEVE-WEAR  
12. 9W-1060 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  8H-2262 [1] RING-TORIC  
  9W-1058 [1] RING  
13. 377-2989 [1] IDLER AS  
14. 249-5500 [1] GUARD AS  
  3W-8240 [2] BEARING  
15. 249-5501 [1] GUARD AS  
  3W-8240 [2] BEARING  
16. 3W-8241 [4] SPRING  
17. 4H-9105 [2] SEAL-O-RING  
18. 7K-9201 [4] SEAL-LIP TYPE  
19. 7K-9211 [4] SEAL-LIP TYPE  
20. 7X-0310 [2] BOLT (7/16-14X2-IN)  
21. 7X-0563 [2] WASHER-HARD (12X35X8-MM THK)  
22. 8T-4133 M [2] NUT (M10X1.5-THD)  
23. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
24. 8T-4198 M [2] BOLT (M10X1.5X100-MM)  
25. 8T-4896 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
26. 9B-7237 [12] BOLT (3/8-16X1.25-IN)  
  M   METRIC PART
 

#SEBP43510403
 

3W-8561: IDLER GP-FRONT

3W-8561 IDLER GP-FRONT
S/N LDX1-268
PART OF 246-8440 UNDERCARRIAGE AR
i02009213 SEBP4351
3W8561 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)(PISTON BEARINGS)  
2. 3P-8432 [4] BUSHING AS-IDLER  
    (EACH INCLUDES)
2A. 8P-6651 [1] BEARING AS  
  9B-2289 [2] PIN  
3. 3W-8177 [2] RETAINER  
4. 3W-8238 [4] CAP  
5. 3W-8679 [2] YOKE AS  
    (EACH INCLUDES)
5A. 8G-0010 [2] BUSHING  
6. 3W-8681 [2] SUPPORT AS  
    (EACH INCLUDES)
6A. 221-3199 [2] BUSHING  
7. 5M-5000 [4] LOCK-PIN  
8. 6Y-0473 [2] PLUG-CLEAR  
9. 7G-4332 [2] STOPPER  
10. 7P-4777 [4] PIN  
11. 278-4654 [4] PIN  
12. 7T-4509 [2] IDLER AS  
13. 7X-0462 [4] BOLT (1-14X3.25-IN)  
14. 8E-9562 [2] SHAFT-TRACK IDLER  
15. 8Y-0039 [2] PLATE-PRESSURE  
16. 8Y-1521 [2] SPRING  
17. 8Y-5859 [2] LINK AS  
18. 8Y-5861 [2] LINK AS  
    (EACH LINK AS INCLUDES)
  3W-8239 [1] SLEEVE-WEAR  
19. 9W-1060 [4] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
19A. 8H-2262 [1] RING-TORIC  
19B. 9W-1058 [1] RING  
19C. Z [1] SEAL-RING  
19D. Z [1] SEAL-RING  
20. 238-9095 CY [2] ADJUSTMENT GP-HYDRAULIC TRACK  
21. 1F-0636 [4] SEAL-LIP TYPE  
22. 249-5500 [2] GUARD AS (RH OUTER/LH INNER)  
22A. 3W-8240 [2] BEARING  
23. 249-5501 [2] GUARD AS (RH INNER/LH OUTER)  
23A. 3W-8240 [2] BEARING  
24. 3W-8241 [8] SPRING  
25. 4H-9105 [4] SEAL-O-RING  
26. 7K-9201 [8] SEAL-LIP TYPE  
27. 7K-9211 [8] SEAL-LIP TYPE  
28. 7X-0310 [4] BOLT (7/16-14X2-IN)  
29. 7X-0563 [4] WASHER-HARD (12X35X8-MM THK)  
30. 7X-2489 M [4] BOLT (M24X3X100-MM)  
31. 8C-3290 M [8] BOLT (M24X3X150-MM)  
32. 8C-5177 [2] SEAL-O-RING  
33. 8T-4133 M [6] NUT (M10X1.5-THD)  
34. 8T-4167 [12] WASHER-HARD (26X44X4-MM THK)  
35. 8T-4194 M [16] BOLT (M12X1.75X50-MM)  
36. 8T-4198 M [4] BOLT (M10X1.5X100-MM)  
37. 8T-4896 [24] WASHER-HARD (10.2X18.5X2.5-MM THK)  
38. 8T-5361 [4] WASHER-HARD (28X49X5-MM THK)  
39. 8T-6685 M [2] BOLT (M10X1.5X110-MM)  
40. 8Y-1739 [2] PIN  
41. 9B-7237 [24] BOLT (3/8-16X1.25-IN)  
   
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP43510404
 

3W-8561: IDLER GP-FRONT

3W-8561 IDLER GP-FRONT
S/N LDX269-UP
PART OF 246-8440 UNDERCARRIAGE AR
i02730570 SEBP4351
3W8561 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 C [4] FITTING-GREASE (1/8-27 PTF)(PISTON BEARINGS)  
3. 3W-8681 [2] SUPPORT AS  
    (EACH INCLUDES)
3A. 221-3199 [2] BUSHING  
  1F-0636 [2] SEAL-LIP TYPE  
  3W-8177 [1] RETAINER  
4. 7X-0462 [4] BOLT (1-14X3.25-IN)  
5. 8Y-0039 [2] PLATE-PRESSURE  
6. 8Y-1521 [2] SPRING  
7. 238-9095 Y [2] ADJUSTMENT GP-HYDRAULIC TRACK  
8. 278-4654 [4] PIN  
9. 283-9645 CY [1] IDLER GP-FRONT (LH)  
10. 283-9646 CY [1] IDLER GP-FRONT (RH)  
12. 7X-2489 M [4] BOLT (M24X3X100-MM)  
13. 8C-3290 M [8] BOLT (M24X3X150-MM)  
14. 8C-5177 [2] SEAL-O-RING  
15. 8T-4133 CM [2] NUT (M10X1.5-THD)  
16. 8T-4167 [12] WASHER-HARD (26X44X4-MM THK)  
17. 8T-5361 [4] WASHER-HARD (28X49X5-MM THK)  
18. 8T-6685 M [2] BOLT (M10X1.5X110-MM)  
19. 8Y-1739 [2] PIN  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43510405
 

5Q-5625: IDLER GP-FRONT

5Q-5625 IDLER GP-FRONT -STEEL MILL
S/N LDX1-UP
PART OF 276-8051 UNDERCARRIAGE AR
AN ATTACHMENT
i01306957 SEBP4351
5Q5625 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 277-4491 [2] IDLER AS  
2. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
3. 3P-8432 [4] BUSHING AS-IDLER  
    (EACH INCLUDES)
  8P-6651 [1] BEARING AS  
  9B-2289 [2] PIN  
5. 3W-8238 [4] CAP  
6. 3W-8679 [2] YOKE AS  
    (EACH INCLUDES)
6A. 8G-0010 [2] BUSHING  
7. 315-3367 [2] SUPPORT AS  
    (EACH INCLUDES)
7A. 221-3199 [2] BUSHING  
  9X-7714 [2] SEAL-LIP TYPE  
  3W-8177 [1] RETAINER  
8. 5M-5000 [4] LOCK-PIN  
9. 5Q-5803 [2] LINK AS  
10. 5Q-5804 [2] LINK AS  
    (EACH LINK AS INCLUDES)
  3W-8239 [1] SLEEVE-WEAR  
11. 7P-4777 [4] PIN  
12. 278-4654 [4] PIN  
13. 7X-0462 [4] BOLT (1-14X3.25-IN)  
14. 8Y-0039 [2] PLATE-PRESSURE  
15. 8Y-1521 [2] SPRING  
16. 9W-1059 [4] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
16A. 9M-9730 [1] RING-SEALING  
16B. 9W-1057 [1] RING  
17. 185-1359 Y [2] SHAFT GP-TRACK IDLER  
18. 239-8170 Y [2] ADJUSTMENT GP-HYDRAULIC TRACK  
19. 249-5500 [2] GUARD AS  
20. 249-5501 [2] GUARD AS  
    (EACH GUARD AS INCLUDES)
  3W-8240 [2] BEARING  
21. 3W-8241 [8] SPRING  
22. 6V-3824 [8] SEAL-LIP TYPE  
23. 7X-0310 [4] BOLT (7/16-14X2-IN)  
24. 7X-0563 [4] WASHER-HARD (12X35X8-MM THK)  
25. 7X-2489 M [4] BOLT (M24X3X100-MM)  
26. 8C-3290 M [8] BOLT (M24X3X150-MM)  
27. 8C-5177 [2] SEAL-O-RING  
28. 8T-4133 M [6] NUT (M10X1.5-THD)  
29. 8T-4167 [12] WASHER-HARD (26X44X4-MM THK)  
30. 8T-4194 M [16] BOLT (M12X1.75X50-MM)  
31. 8T-4198 M [4] BOLT (M10X1.5X100-MM)  
32. 8T-4896 [24] WASHER-HARD (10.2X18.5X2.5-MM THK)  
33. 8T-5361 [4] WASHER-HARD (28X49X5-MM THK)  
34. 8T-6685 M [2] BOLT (M10X1.5X110-MM)  
35. 8T-7569 [8] SEAL-LIP TYPE  
36. 8Y-1739 [2] PIN  
37. 9B-7237 [24] BOLT (3/8-16X1.25-IN)  
38. 9M-9729 [4] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43510406
 

152-8054: LINK AS-TRACK

152-8054 LINK AS-TRACK -ROTATING BUSHING TRACK
S/N LDX1-UP
SEALED, LUBRICATED
PART OF 170-3822, 170-3824, 237-7323 TRACK GP
AN ATTACHMENT
i01182212 SEBP4351
1528054 LINK AS-TRACK Parts scheme
  For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-9241 [1] LINK-TRACK MASTER (PIN END, RH)  
2. 6I-9242 [1] LINK-TRACK MASTER (PIN END, LH)  
3. 152-8073 [160] RING-THRUST  
4. 6Y-0473 [40] PLUG-CLEAR  
  7G-4332 [40] STOPPER  
5. 152-8080 [40] PIN-TRACK  
6. 165-1758 [39] JOINT AS-TRACK LINK (ROTATING BUSHING TRACK, RH)  
    (EACH INCLUDES)
  6I-9239 [1] LINK-TRACK (RH)  
7. 165-1759 [39] JOINT AS-TRACK LINK (ROTATING BUSHING TRACK, LH)  
    (EACH INCLUDES)
  6I-9240 [1] LINK-TRACK (LH)  
8. 165-1760 [1] JOINT AS (BUSHING END, RH)  
  6I-9243 [1] LINK-TRACK MASTER (BUSHING END, RH)  
9. 165-1761 [1] JOINT AS (BUSHING END, LH)  
  6I-9244 [1] LINK-TRACK MASTER (BUSHING END, LH)  
10. 165-1770 [40] BUSHING-TRACK  
11. 239-7943 [160] SEAL AS  
 

#SEBP43510407
 

236-8177: LINK AS-TRACK

236-8177 LINK AS-TRACK
S/N LDX1-UP
SEALED & LUBRICATED
PART OF 247-1465, 247-1466, 247-1467, 247-1468, 247-1469, 247-1471 TRACK GP
AN ATTACHMENT
i02009353 SEBP4351
2368177 LINK AS-TRACK Parts scheme
  For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 237-3790 [40] BUSHING-TRACK  
2. 255-4793 [1] LINK-TRACK MASTER (BUSHING END, RH)(BUSHING END, RH)  
3. 255-4789 [39] LINK-TRACK (RH)  
4. 251-1659 [80] SEAL AS  
5. 152-8073 [80] RING-THRUST  
6. 255-4794 [1] LINK-TRACK MASTER (BUSHING END, LH)(BUSHING END, LH)  
7. 6Y-0473 [1] PLUG-CLEAR  
8. 7G-4332 [1] STOPPER  
9. 199-2794 [40] PIN-TRACK  
10. 255-4792 [1] LINK-TRACK MASTER (PIN END, LH)(PIN END, LH)  
11. 255-4790 [39] LINK-TRACK (LH)  
12. 255-4791 [1] LINK-TRACK MASTER (PIN END, RH)(PIN END, RH)  
 

#SEBP43510408
 

291-1612: LINK AS-TRACK

291-1612 LINK AS-TRACK
S/N LDX1-UP
SEALED, LUBRICATED
PART OF 236-8178, 237-9143, 247-1465, 247-1466, 247-1467, 247-1468, 247-1469, 247-1471, 247-1474 TRACK GP
ALSO AN ATTACHMENT
i02740532 SEBP4351
2911612 LINK AS-TRACK Parts scheme
  For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 237-3790 [40] BUSHING-TRACK  
2. 289-3083 [39] LINK-TRACK (RH)  
3. 289-3084 [39] LINK-TRACK (LH)  
4. 255-4791 [1] LINK-TRACK MASTER (PIN END, RH)  
5. 255-4792 [1] LINK-TRACK MASTER (PIN END, LH)  
6. 255-4793 [1] LINK-TRACK MASTER (BUSHING END, RH)  
7. 255-4794 [1] LINK-TRACK MASTER (BUSHING END, LH)  
8. 199-2794 [40] PIN-TRACK  
9. 251-1659 [80] SEAL AS  
10. 152-8073 [80] RING-THRUST  
11. 6Y-0454 [40] STOPPER AS  
    (EACH INCLUDES)
11A. 7G-4332 [1] STOPPER  
11B. 6Y-0473 [1] PLUG-CLEAR  
 

#SEBP43510409
 

291-1614: LINK AS-TRACK

291-1614 LINK AS-TRACK
S/N LDX1-UP
SEALED
PART OF 247-1472, 247-1473, 252-9613, 269-1134 TRACK GP
AN ATTACHMENT
i02578302 SEBP4351
2911614 LINK AS-TRACK Parts scheme
  For full view, you need register

Parts for your 973C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 247-1476 [1] BUSHING-MASTER  
2. 247-1475 [39] BUSHING-TRACK  
3. 289-3083 [40] LINK-TRACK (RH)  
4. 289-3084 [40] LINK-TRACK (LH)  
5. 8E-4272 [39] PIN-TRACK  
6. 8E-4273 [1] PIN-TRACK MASTER  
7. 8M-6238 [2] SPACER (49.4X71.7X9.2-MM THK)  
8. 8M-6239 [160] WASHER-BELLEVILLE  
 

Information:

Operation and Maintenance Manual
Idler Swing Link - Lubricate
973C Track-Type Loader
Specifications
Front Idler and Recoil Spring
973C Track-Type Loader Machine Systems
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Idler Oil Fill Volume {4159, 4159}
Idler Oil Fill Volume {4159, 4159}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Duo-Cone Seal Assembly and Installation Procedure for the 963 and 973 Track-Type Loaders {4150, 4159, 7555, 7561}
Duo-Cone Seal Assembly and Installation Procedure for the 963 and 973 Track-Type Loaders {4150, 4159, 7555, 7561}
Disassembly and Assembly Procedures for Idlers of Track-Type Loaders {4159}
Disassembly and Assembly Procedures for Idlers of Track-Type Loaders {4159}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Disassembly and Assembly
Front Idler and Yoke - Remove
973C Track-Type Loader Powertrain
Front Idler and Yoke - Install
973C Track-Type Loader Powertrain
Service Magazine
Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10
Cleanliness Around the Fill Valve Is Important Before Adjusting Track Tension for Certain Track-Type Loaders {4157}
2013/12/23

Caterpillar Parts SIS Catalog 973C :

240-9422 IDLER GP-FRONT
GUARD GP-TRACK ROLLER
3W-8545 GUARD GP-TRACK ROLLER
GUARD GP-TRACK ROLLER
192-4072 GUARD GP-TRACK ROLLER
GUARD GP-TRACK GUIDE
3W-8336 GUARD GP-TRACK GUIDE
GUARD GP-TRACK GUIDE
188-9736 GUARD GP-TRACK GUIDE
274-9139 GUARD AR-SEAL
FRAME GP-TRACK ROLLER
276-8057 FRAME GP-TRACK ROLLER
FRAME GP-TRACK ROLLER
276-8046 FRAME GP-TRACK ROLLER
IDLER GP-FRONT
283-9645 IDLER GP-FRONT
IDLER GP-FRONT
283-9646 IDLER GP-FRONT
IDLER GP-FRONT
3W-8561 IDLER GP-FRONT
IDLER GP-FRONT
3W-8561 IDLER GP-FRONT
IDLER GP-FRONT
5Q-5625 IDLER GP-FRONT
LINK AS-TRACK
152-8054 LINK AS-TRACK
LINK AS-TRACK
236-8177 LINK AS-TRACK
LINK AS-TRACK
291-1612 LINK AS-TRACK

Truck sale:

Caterpillar 973C
 
Caterpillar 973C
- track loaders
ZIEGLER CAT
Caterpillar 973C, track loaders, Construction
120,000 
Caterpillar 973C, track loaders, Construction
- track loaders
QUINN COMPANY
Caterpillar 973C RIPPER, Rippers, Construction
5,047 
Caterpillar 973C RIPPER, Rippers, Construction
- Scarifiers
ZIEGLER CAT
Caterpillar 973C, Construction
 
Caterpillar 973C, Construction
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI
Italy
Caterpillar 973C, Construction
20,000 
Caterpillar 973C, Construction
- track loaders
ALTORFER INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.