AIR INLET AND EXHAUST SYSTEM
VALVE GP-CONTROLAIR INLET AND EXHAUST SYSTEM
VALVE GP-CONTROL
#SEBP43564240
221-3353: CONTROL GP-CLEAN GAS INDUCTION
221-3353 CONTROL GP-CLEAN GAS INDUCTION
S/N LEE1-168
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
FOR USE WITH ENGINES REQUIRING HIGH MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
S/N LEE1-168
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
FOR USE WITH ENGINES REQUIRING HIGH MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 249-9450 | [1] | HOSE | |
| 2. | 249-9451 | [1] | SHIELD-HEAT | |
| 3. | 271-5730 Y | [1] | VALVE GP-CLEAN GAS INDUCTION | |
| 4. | 174-5414 | [2] | CLAMP (T'BOLT) | |
| 5. | 6V-9607 M | [3] | BOLT (M8X1.25X120-MM) | |
| 6. | 8T-0639 M | [4] | BOLT (M6X1X12-MM) | |
| 7. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 9X-8267 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43564241
221-3353: CONTROL GP-CLEAN GAS INDUCTION
221-3353 CONTROL GP-CLEAN GAS INDUCTION
S/N LEE169-599
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
FOR USE WITH ENGINES REQUIRING HIGH MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
S/N LEE169-599
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
FOR USE WITH ENGINES REQUIRING HIGH MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 249-9450 | [1] | HOSE | |
| 2. | 249-9451 | [1] | SHIELD-HEAT | |
| 3. | 278-1657 CY | [1] | VALVE GP-CLEAN GAS INDUCTION | |
| 4. | 174-5414 | [2] | CLAMP (T'BOLT) | |
| 5. | 6V-9607 M | [3] | BOLT (M8X1.25X120-MM) | |
| 6. | 2W-9513 CM | [4] | BOLT (M6X1X10-MM) | |
| 7. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 9X-8267 | [4] | WASHER (6.6X12X2-MM THK) | |
| 9. | 234-5013 CY | [1] | SENSOR GP-TEMPERATURE (CGI AIR) | |
| 10. | 6V-5050 C | [1] | SEAL-O-RING | |
| 11. | 3E-4041 C | [1] | ELBOW (90-DEG) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43564242
221-3353: CONTROL GP-CLEAN GAS INDUCTION
221-3353 CONTROL GP-CLEAN GAS INDUCTION
S/N LEE600-840
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
FOR USE WITH ENGINES REQUIRING HIGH MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
S/N LEE600-840
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
FOR USE WITH ENGINES REQUIRING HIGH MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-4041 | [1] | ELBOW (90-DEG) | |
| 2. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (CGI AIR) | |
| 3. | 285-2096 C | [1] | HOSE | |
| 4. | 174-5414 | [2] | CLAMP (T'BOLT) | |
| 5. | 285-8390 CY | [1] | VALVE GP-CLEAN GAS INDUCTION | |
| 6. | 288-1697 C | [1] | SHIELD-HEAT | |
| 7. | 2R-6806 C | [2] | ADAPTER | |
| 8. | 2W-9513 CM | [3] | BOLT (M6X1X10-MM) | |
| 9. | 6V-5049 C | [2] | SEAL-O-RING | |
| 10. | 6V-5050 | [1] | SEAL-O-RING | |
| 11. | 6V-5221 CM | [3] | BOLT (M8X1.25X80-MM) | |
| 12. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 9X-8267 C | [3] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43564243
221-3353: CONTROL GP-CLEAN GAS INDUCTION
221-3353 CONTROL GP-CLEAN GAS INDUCTION
S/N LEE841-1006
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
FOR USE WITH ENGINES REQUIRING HIGH MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
S/N LEE841-1006
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
FOR USE WITH ENGINES REQUIRING HIGH MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 183-6806 C | [1] | ELBOW | |
| 2. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (CLEAN GAS INDUCTION) | |
| 3. | 285-2096 | [1] | HOSE | |
| 4. | 174-5414 | [2] | CLAMP | |
| 5. | 298-6252 CY | [1] | VALVE GP-CLEAN GAS INDUCTION | |
| 6. | 288-1697 | [1] | SHIELD-HEAT | |
| 7. | 2R-6806 | [2] | ADAPTER | |
| 8. | 2W-9513 M | [3] | BOLT (M6X1X10-MM) | |
| 9. | 6V-5049 | [2] | SEAL-O-RING | |
| 10. | 6V-5050 | [1] | SEAL-O-RING | |
| 11. | 6V-5221 M | [3] | BOLT (M8X1.25X80-MM) | |
| 12. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 9X-8267 | [3] | WASHER (6.6X12X2-MM THK) | |
| 14. | 299-1711 C | [1] | TUBE AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43564244
221-3353: CONTROL GP-CLEAN GAS INDUCTION
221-3353 CONTROL GP-CLEAN GAS INDUCTION
S/N LEE1007-UP
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
Type 1
FOR USE WITH ENGINES REQUIRING HIGH MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
S/N LEE1007-UP
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
Type 1
FOR USE WITH ENGINES REQUIRING HIGH MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS#SEBP43564245
221-3353: CONTROL GP-CLEAN GAS INDUCTION
221-3353 CONTROL GP-CLEAN GAS INDUCTION
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
Type 2
FOR USE WITH ENGINES REQUIRING HIGH MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
Type 2
FOR USE WITH ENGINES REQUIRING HIGH MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS#SEBP43564246
222-3169: CONTROL GP-CLEAN GAS INDUCTION
222-3169 CONTROL GP-CLEAN GAS INDUCTION
S/N LEE1-174
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
FOR USE WITH ENGINES REQUIRING MID MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
AN ATTACHMENT
S/N LEE1-174
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
FOR USE WITH ENGINES REQUIRING MID MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 249-9452 | [1] | HOSE | |
| 2. | 249-9453 | [1] | SHIELD-HEAT | |
| 3. | 271-5730 Y | [1] | VALVE GP-CLEAN GAS INDUCTION | |
| 4. | 174-5414 | [2] | CLAMP (T'BOLT) | |
| 5. | 6V-9607 M | [3] | BOLT (M8X1.25X120-MM) | |
| 6. | 8T-0639 M | [4] | BOLT (M6X1X12-MM) | |
| 7. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 9X-8267 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43564247
222-3169: CONTROL GP-CLEAN GAS INDUCTION
222-3169 CONTROL GP-CLEAN GAS INDUCTION
S/N LEE510-713
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
FOR USE WITH ENGINES REQUIRING MID MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
S/N LEE510-713
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
FOR USE WITH ENGINES REQUIRING MID MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-4041 C | [1] | ELBOW | |
| 2. | 234-5013 CY | [1] | SENSOR GP-TEMPERATURE (CGI AIR) | |
| 3. | 249-9452 | [1] | HOSE | |
| 4. | 174-5414 | [2] | CLAMP (T'BOLT) | |
| 5. | 249-9453 | [1] | SHIELD-HEAT | |
| 6. | 283-9968 CY | [1] | VALVE GP-CLEAN GAS INDUCTION | |
| 7. | 2W-9513 CM | [4] | BOLT (M6X1X10-MM) | |
| 8. | 6V-5050 C | [1] | SEAL-O-RING | |
| 9. | 6V-9607 M | [3] | BOLT (M8X1.25X120-MM) | |
| 10. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 11. | 9X-8267 | [4] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43564248
222-3169: CONTROL GP-CLEAN GAS INDUCTION
222-3169 CONTROL GP-CLEAN GAS INDUCTION
S/N LEE714-840
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
FOR USE WITH ENGINES REQUIRING MID MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
S/N LEE714-840
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
FOR USE WITH ENGINES REQUIRING MID MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-4041 | [1] | ELBOW | |
| 2. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (CGI AIR) | |
| 3. | 249-9452 | [1] | HOSE | |
| 4. | 174-5414 | [2] | CLAMP (T'BOLT) | |
| 5. | 285-8390 CY | [1] | VALVE GP-CLEAN GAS INDUCTION | |
| 6. | 287-1629 C | [1] | SHIELD-HEAT | |
| 7. | 2R-6806 | [2] | ADAPTER | |
| 8. | 2W-9513 CM | [3] | BOLT (M6X1X10-MM) | |
| 9. | 6V-5049 | [2] | SEAL-O-RING | |
| 10. | 6V-5050 | [1] | SEAL-O-RING | |
| 11. | 6V-5221 M | [3] | BOLT (M8X1.25X80-MM) | |
| 12. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 9X-8267 C | [3] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43564249
222-3169: CONTROL GP-CLEAN GAS INDUCTION
222-3169 CONTROL GP-CLEAN GAS INDUCTION
S/N LEE841-1006
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
FOR USE WITH ENGINES REQUIRING MID MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
S/N LEE841-1006
PROVIDES CGI VALVE GP AND LOW PRESSURE TURBO INLET DUCT
FOR USE WITH ENGINES REQUIRING MID MOUNT TURBO CONFIGURATION AND LINES GP-AIR COMPRESSOR (AIR SUPPLY)
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 183-6806 | [1] | ELBOW | |
| 2. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (CGI AIR) | |
| 3. | 249-9452 | [1] | HOSE | |
| 4. | 174-5414 | [2] | CLAMP (T'BOLT) | |
| 5. | 298-6252 CY | [1] | VALVE GP-CLEAN GAS INDUCTION | |
| 6. | 287-1629 | [1] | SHIELD-HEAT | |
| 7. | 2R-6806 | [2] | ADAPTER | |
| 8. | 2W-9513 M | [3] | BOLT (M6X1X10-MM) | |
| 9. | 6V-5049 | [2] | SEAL-O-RING | |
| 10. | 6V-5050 | [1] | SEAL-O-RING | |
| 11. | 6V-5221 M | [3] | BOLT (M8X1.25X80-MM) | |
| 12. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 9X-8267 | [3] | WASHER (6.6X12X2-MM THK) | |
| 14. | 299-1711 C | [1] | TUBE AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
AIR INLET AND EXHAUST SYSTEM
VALVE GP-CONTROL
Truck Engine News
Special Instruction
Inspecting and Repairing the Air Inlet and Exhaust System After Improper Fueling{1000, 1052, 1053, 1061, 1087}
Inspecting and Repairing the Air Inlet and Exhaust System After Improper Fueling{1000, 1052, 1053, 1061, 1087}
Inspecting and Repairing the Air Inlet and Exhaust System After Improper Fueling{1000, 1052, 1053, 1061, 1087}
Procedure for Cleaning Soot from the Engine after a Failure of the Diesel Particulate Filter (DPF) {1052, 1053, 1061, 1063, 1087, 108C, 108N}
Procedure for Cleaning Soot from the Engine after a Failure of the Diesel Particulate Filter (DPF) {1052, 1053, 1061, 1063, 1087, 108C, 108N}
Procedure for Cleaning Soot from the Engine after a Failure of the Diesel Particulate Filter (DPF) {1052, 1053, 1061, 1063, 1087, 108C, 108N}
A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130}
A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130}
A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130}
Technical Information Bulletin
Information on the Clean Gas Induction (CGI) Flex Pipe Connection Found Broken in Some 2007 Emissions Compliant Engines{1071, 108N, 5510}
Information on the Clean Gas Induction (CGI) Flex Pipe Connection Found Broken in Some 2007 Emissions Compliant Engines{1071, 108N, 5510}
Information on the Clean Gas Induction (CGI) Flex Pipe Connection Found Broken in Some 2007 Emissions Compliant Engines{1071, 108N, 5510}
Specifications
Troubleshooting
Disassembly and Assembly
Caterpillar Parts SIS Catalog C13 :
Truck sale:
CATERPILLAR C13 2014
- STATIONARY GENERATOR SETS
PANTROPIC POWER
8205 N.W. 58th Street - Miami - Florid
- STATIONARY GENERATOR SETS
PANTROPIC POWER
8205 N.W. 58th Street - Miami - Florid