FUEL SYSTEM
FILTER GP-FUELLINES GP-FUEL INJECTION
FUEL SYSTEM GP
FUEL SYSTEM
FILTER GP-FUEL
#SEBP43640240
7W-9742: FILTER GP-FUEL
7W-9742 FILTER GP-FUEL -LH
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3512C PETROLEUM ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1N-2895 | [1] | SPRING | |
| 2. | 1R-0756 | [5] | FILTER ELEMENT-FUEL (ADVANCED EFFICIENCY) | |
| 3. | 1W-7548 | [1] | TUBE AS | |
| 4. | 2S-5100 | [1] | VALVE-MANUAL | |
| 5. | 2W-9300 | [1] | COVER-FILTER HOUSING | |
| 6. | 4P-0692 | [4] | CLAMP AS | |
| (EACH INCLUDES) | ||||
| 108-1434 | [1] | GROMMET | ||
| 7. | 6I-3754 | [1] | RETAINER-FILTER | |
| 8. | 6N-4414 | [1] | COVER-FILTER BASE | |
| 9. | 7F-0192 C | [2] | BOLT (3/8-16X2-IN) | |
| 10. | 8T-6766 | [1] | PLUG-PIPE | |
| 11. | 9Y-8389 | [1] | GASKET (FUEL FILTER) | |
| 12. | 237-2719 | [1] | TUBE AS | |
| 13. | 267-9689 | [1] | COVER-FILTER HOUSING | |
| 14. | 278-1776 | [1] | HOUSING AS-FUEL FILTER | |
| 15. | 250-1498 | [3] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 250-1497 | [1] | ELBOW | ||
| 16. | 031-4136 | [1] | TEE-FLARED | |
| 17. | 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | |
| 18. | 0S-1608 | [2] | BOLT (3/8-16X3.75-IN) | |
| 19. | 1B-7182 C | [1] | BOLT (5/16-18X1.25-IN) | |
| 20. | 2M-9780 | [2] | SEAL-O-RING | |
| 21. | 3B-1915 C | [8] | BOLT (3/8-16X1.375-IN) | |
| 22. | 3K-0360 | [1] | SEAL-O-RING | |
| 23. | 5D-5957 | [2] | SEAL-O-RING | |
| 24. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 25. | 5P-0537 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 27. | 6V-5048 | [5] | SEAL-O-RING | |
| 28. | 6V-5049 | [1] | SEAL-O-RING | |
| 29. | 7B-2742 | [1] | BOLT (1/4-20X1.25-IN) | |
| 30. | 8M-9024 | [8] | WASHER-HARD (10.2X22.5X5-MM THK) | |
| 31. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 32. | 9S-4182 | [5] | PLUG (7/16-20-THD) | |
| 33. | 9S-4185 | [1] | PLUG (3/4-16-THD) | |
| 34. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 35. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP43640241
8N-6435: FILTER GP-PRIMARY FUEL
8N-6435 FILTER GP-PRIMARY FUEL
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3512C PETROLEUM ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1W-0531 | [1] | BASE-PRIMARY FUEL FILTER | |
| 2. | 7N-1628 | [1] | NUT (3/8-24-THD) | |
| 3. | 2J-0157 | [1] | SEAL-O-RING | |
| 4. | 1L-3769 | [1] | RING-RETAINING | |
| 5. | 7H-9678 | [1] | RETAINER-ELEMENT | |
| 6. | 2H-3429 | [1] | RING-RETAINING | |
| 7. | 7S-9323 | [1] | SPRING | |
| 8. | 8H-7202 | [1] | CASE AS-FUEL FILTER | |
| 9. | 9M-2342 | [1] | FILTER ELEMENT-FUEL | |
| 10. | 8H-2778 | [1] | SEAL-RING (FUEL FILTER) |
#SEBP43640242
188-9765: FILTER GP-WATER SEP & FUEL
188-9765 FILTER GP-WATER SEP & FUEL
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3512C PETROLEUM ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| AVAILABLE REPAIR KIT(S): | ||||
| 134-6307 | [3] | FILTER ELEMENT-FUEL (WATER SEPARATOR) | ||
| (INCLUDES FILTER ELEMENT & SEALS) | ||||
#SEBP43640243
386-1771: INJECTOR GP-FUEL
For full view, you need register
Parts for your 3512C PETROLEUM ENGINE:
CATERPILLAR SIS#SEBP43640244
392-0219: INJECTOR GP-FUEL
For full view, you need register
Parts for your 3512C PETROLEUM ENGINE:
CATERPILLAR SIS#SEBP43640245
397-2960: KIT-FUEL SYSTEM PARTS
397-2960 KIT-FUEL SYSTEM PARTS -BLENDED FUEL
MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS.
PART OF 416-4346 CONVERSION AR-BLENDED FUEL, 423-5685 CONVERSION GP-BLENDED FUEL
FIELD INSTALLATION
MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS.
PART OF 416-4346 CONVERSION AR-BLENDED FUEL, 423-5685 CONVERSION GP-BLENDED FUEL
FIELD INSTALLATION
For full view, you need register
Parts for your 3512C PETROLEUM ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 165-3931 N | [1] | BOLT (3/8-16X1.75-IN) | ||
| 0S-1588 N | [4] | BOLT (3/8-16X1.25-IN) | ||
| 0S-1594 N | [3] | BOLT (3/8-16X1-IN) | ||
| 4L-6454 N | [4] | BOLT (3/8-16X1-IN) | ||
| 8S-9191 N | [2] | BOLT (3/8-16X4-IN) | ||
| 2H-3745 P | [6] | BOLT (1-14X2.75-IN) | ||
| 0S-1625 P | [12] | BOLT (5/8-11X2.5-IN) | ||
| 0L-1351 S | [2] | BOLT (3/8-16X0.875-IN) | ||
| 1A-2029 S | [6] | BOLT (3/8-16X1.125-IN) | ||
| 384-7876 N | [1] | BRACKET | ||
| 416-6524 N | [2] | BRACKET | ||
| 6B-1628 N | [1] | BUSHING-REDUCER | ||
| 5P-9297 N | [7] | CLIP (LOOP) | ||
| 6V-0267 N | [3] | CLIP (TAB) | ||
| 6V-0268 N | [3] | CLIP (SLOT) | ||
| 6V-3265 N | [1] | CLIP | ||
| 8C-6866 N | [3] | CONNECTOR | ||
| 8C-6867 N | [1] | CONNECTOR | ||
| 267-9689 H | [1] | COVER-FILTER HOUSING | ||
| 3B-6555 N | [1] | ELBOW | ||
| 318-2485 N | [1] | GASKET | ||
| 419-1797 NI | [1] | HOSE AS | ||
| 419-1798 NI | [1] | HOSE AS | ||
| 005-8615 N | [1] | NIPPLE-PIPE | ||
| 9S-8752 N | [6] | NUT-FULL (3/8-16-THD) | ||
| 318-2484 N | [1] | ORIFICE | ||
| 265-5254 N | [2] | PLATE | ||
| 8T-6761 N | [1] | PLUG-PIPE (1-11-1/2 NPT THD) | ||
| 204-6707 N | [2] | REGULATOR-WATER TEMPERATURE (129-DEG F) | ||
| 3S-9643 N | [2] | SEAL-LIP TYPE | ||
| 6V-1454 N | [2] | SEAL-O-RING | ||
| 4F-7391 N | [2] | SEAL-O-RING | ||
| 4J-5477 N | [4] | SEAL-O-RING | ||
| 5N-7919 P | [12] | SPACER (18.85X26.67X33-MM THK) | ||
| 8G-2077 P | [6] | SPACER (26X45X17.5-MM THK) | ||
| 277-2265 S | [1] | SUPPORT AS | ||
| 4B-7770 N | [1] | TEE | ||
| 196-9420 N | [1] | VALVE-BALL | ||
| 5P-8250 P | [6] | WASHER (28X49X5-MM THK) | ||
| 5M-2894 N | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 8T-4896 N | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 9X-6458 N | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 5P-8247 P | [12] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 5M-2894 S | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| H | PART MARKED H FUW FUEL FILTER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| N | PARTS MARKED N FUW WATER LINES GROUP 397-9400 | |||
| P | PARTS MARKED P FUW PRECLEANER GROUP 416-7819 | |||
| S | PARTS MARKED S FUW AIR CLEANER GROUP 416-7820 | |||
#SEBP43640246
398-2069: KIT-FUEL SYSTEM PARTS
398-2069 KIT-FUEL SYSTEM PARTS
PART OF 416-4347 CONVERSION GP-BLENDED FUEL
FOR USE WITH ALL ENGINES FOR BLENDED FUEL CAPABILITY, MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS
PART OF 416-4347 CONVERSION GP-BLENDED FUEL
FOR USE WITH ALL ENGINES FOR BLENDED FUEL CAPABILITY, MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS
For full view, you need register
Parts for your 3512C PETROLEUM ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 0S-1585 | [1] | BOLT (1/2-13X1.5-IN) | ||
| 165-3929 | [2] | BOLT (3/8-16X1.5-IN) | ||
| 1F-7958 | [2] | NUT-FULL (1/2-13-THD) | ||
| 4W-0530 | [2] | RING-RETAINING | ||
| 7D-1649 | [5] | WASHER-HARD (13.5X32X5-MM THK) | ||
| 8T-1919 | [2] | SEAL-O-RING | ||
| 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | ||
| 9X-6458 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 2B-0947 | [2] | BOLT (1/2-13X2.25-IN) | ||
| 125-2780 | [1] | TUBE | ||
| 379-5142 | [1] | BRACKET | ||
| 379-5144 | [1] | TUBE | ||
| 386-3398 | [1] | BRACKET | ||
| 390-4498 | [1] | TUBE | ||
| (ABOVE PARTS ARE PART OF THE 379-5145 TEMPERATURE REGULATOR GROUP) | ||||
| 165-3931 | [2] | BOLT (3/8-16X1.75-IN) | ||
| 0S-1588 | [14] | BOLT (3/8-16X1.25-IN) | ||
| 165-3929 | [4] | BOLT (3/8-16X1.5-IN) | ||
| 0S-1595 | [11] | BOLT (1/2-13X1.25-IN) | ||
| 0T-0055 | [4] | BOLT (3/8-16X4.25-IN) | ||
| 2A-4639 | [4] | BOLT (3/8-16X1.625-IN) | ||
| 5M-2894 | [12] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-1075 | [8] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 5S-0003 | [4] | NUT (5/16-18-THD) | ||
| 7D-1649 | [11] | WASHER-HARD (13.5X32X5-MM THK) | ||
| 7M-1599 | [4] | STUD-TAPERLOCK | ||
| 7N-6986 | [2] | SUPPORT | ||
| 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9S-8752 | [10] | NUT-FULL (3/8-16-THD) | ||
| 9X-6458 | [22] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 381-1062 | [1] | TUBE AS | ||
| 381-1063 | [1] | TUBE AS | ||
| 386-3396 | [2] | BRACKET | ||
| 388-2132 | [1] | BRACKET | ||
| 388-2133 | [1] | BRACKET | ||
| (ABOVE PARTS ARE PART OF THE 381-5733 AIR CLEANER MOUNTING GROUP) | ||||
| 1A-2029 | [40] | BOLT (3/8-16X1.125-IN) | ||
| 1C-2251 | [8] | BOLT (3/8-16X1.87-IN) | ||
| 5L-5840 | [8] | WASHER (9.25X16.92X1.83-MM THK) | ||
| 5M-2894 | [48] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 277-5833 | [8] | SEAL | ||
| 349-6052 | [4] | COVER-CAMSHAFT | ||
| 374-1513 | [4] | COVER-CAMSHAFT | ||
| (ABOVE PARTS ARE PART OF THE 390-2914 CYLINDER BLOCK COVER GROUP) | ||||
| 1A-8537 J | [2] | BOLT (5/8-11X2.75-IN) | ||
| 2B-0947 J | [8] | BOLT (1/2-13X2.25-IN) | ||
| 3B-1915 J | [2] | BOLT (3/8-16X1.375-IN) | ||
| 0S-1585 HJ | [10] | BOLT (1/2-13X1.5-IN) | ||
| 0S-1591 H | [8] | BOLT (3/8-16X1.5-IN) | ||
| 3B-1915 H | [6] | BOLT (3/8-16X1.375-IN) | ||
| 2A-4639 HJ | [8] | BOLT (3/8-16X1.625-IN) | ||
| 8S-9191 HJ | [4] | BOLT (3/8-16X4-IN) | ||
| 5B-5620 HJ | [3] | BOLT (5/16-18X2.125-IN) | ||
| 165-3929 J | [10] | BOLT (3/8-16X1.5-IN) | ||
| 165-3931 J | [2] | BOLT (3/8-16X1.75-IN) | ||
| 417-5543 H | [1] | BRACKET AS | ||
| 440-4786 J | [1] | BRACKET AS | ||
| 450-3143 J | [1] | BRACKET AS | ||
| 397-8632 HJ | [1] | BRACKET | ||
| 397-8629 H | [2] | BRACKET | ||
| 440-4792 J | [1] | BRACKET | ||
| 2L-6055 H | [1] | CAP-PIPE | ||
| 4P-8134 HJ | [1] | CLIP (LADDER) | ||
| 211-5237 J | [1] | CONNECTOR | ||
| 293-8396 HJ | [1] | CORE AS-FUEL COOLER | ||
| 122-8905 H | [2] | ELBOW (90-DEG) | ||
| 7X-7951 H | [3] | ELBOW-UNION | ||
| 3B-7296 H | [3] | FITTING (NIPPLE) | ||
| 6N-4543 H | [1] | FITTING | ||
| 2M-4108 H | [2] | GASKET | ||
| 105-8180 HJ | [1] | GASKET | ||
| 293-4056 J | [2] | GASKET | ||
| 420-8789 J | [2] | GASKET | ||
| 425-3549 J | [2] | GASKET | ||
| 3B-7286 H | [1] | NIPPLE-PIPE | ||
| 5S-0003 HJ | [3] | NUT (5/16-18-THD) | ||
| 1F-7958 J | [8] | NUT-FULL (1/2-13-THD) | ||
| 4K-0367 J | [8] | NUT-FULL (5/8-11-THD) | ||
| 9S-8752 HJ | [10] | NUT-FULL (3/8-16-THD) | ||
| 265-5255 H | [2] | PLATE | ||
| 9X-6138 H | [1] | PLUG-PIPE | ||
| 210-2007 HY | [1] | REGULATOR GP-GAS PRESSURE | ||
| 435-0888 J | [1] | REGULATOR GP-GAS PRESSURE | ||
| 6V-8398 HJ | [2] | SEAL-O-RING | ||
| 6L-7322 H | [1] | TEE-PIPE | ||
| 397-8628 H | [1] | TUBE AS | ||
| 397-8631 H | [1] | TUBE AS | ||
| 440-4788 J | [1] | TUBE AS | ||
| 440-4791 J | [1] | TUBE AS | ||
| 440-4794 J | [1] | TUBE AS | ||
| 450-2989 J | [1] | TUBE AS | ||
| 538-8794 HJY | [1] | VALVE GP-SOLENOID (24-VOLT) | ||
| 419-0893 JY | [1] | VALVE GP-SOLENOID (24-VOLT) | ||
| 5M-2894 HJ | [20] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-8245 HJ | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 5P-8247 J | [16] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 9M-1974 HJ | [6] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 7D-1649 H | [2] | WASHER-HARD (13.5X32X5-MM THK) | ||
| 7D-1649 J | [18] | WASHER-HARD (13.5X32X5-MM THK) | ||
| 9X-6458 HJ | [16] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| (ABOVE PARTS MARKED H ARE PART OF 397-8633 GAS PRESSURE REGULATOR GROUP) | ||||
| (ABOVE PARTS MARKED J ARE PART OF 440-4790 GAS PRESSURE REGULATOR GROUP) | ||||
| 165-3929 NP | [6] | BOLT (3/8-16X1.5-IN) | ||
| 2A-4639 NP | [2] | BOLT (3/8-16X1.625-IN) | ||
| 3B-1915 NP | [2] | BOLT (3/8-16X1.375-IN) | ||
| 5M-2894 NP | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6V-1581 NP | [2] | CLIP (SLOT) | ||
| 6V-1582 NP | [2] | CLIP (TAB) | ||
| 7K-1401 NP | [2] | CLIP | ||
| 7K-1402 NP | [2] | BRACKET | ||
| 9S-8752 NP | [14] | NUT-FULL (3/8-16-THD) | ||
| 9X-6458 NP | [16] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 105-8180 NP | [1] | GASKET | ||
| 165-3931 NP | [2] | BOLT (3/8-16X1.75-IN) | ||
| 216-2285 NP | [1] | JOINT AS-TUBE | ||
| 127-4230 | [2] | SEAL | ||
| 255-6464 NP | [2] | JOINT AS | ||
| (EACH INCLUDES) | ||||
| 255-6466 | [2] | SEAL | ||
| 391-2202 NP | [1] | BRACKET | ||
| 442-5387 N | [1] | TUBE AS | ||
| 442-5388 N | [1] | TUBE AS | ||
| 442-5391 NP | [1] | TUBE AS | ||
| 442-6223 NP | [1] | BRACKET | ||
| 442-6224 NP | [1] | BRACKET | ||
| 442-6225 NP | [1] | BRACKET | ||
| (ABOVE PARTS MARKED N ARE PART OF 442-6982 FUEL LINES GROUP) | ||||
| (ABOVE PARTS MARKED P ARE PART OF 442-9594 FUEL LINES GROUP) | ||||
| 5N-2126 | [16] | CONNECTOR (THERMOCOUPLE) | ||
| 6V-9028 | [2] | SEAL-O-RING | ||
| 7K-1181 | [100] | STRAP-CABLE | ||
| 9X-0262 | [1] | ADAPTER | ||
| 195-2431 | [8] | SENSOR GP-DETONATION | ||
| 214-7566 | [7] | SEAL-O-RING | ||
| 214-7568 | [2] | SEAL-O-RING | ||
| 228-7100 | [8] | SEAL-O-RING | ||
| 228-7101 | [2] | SEAL-O-RING | ||
| 238-5080 | [8] | SEAL-O-RING | ||
| 256-6453 | [2] | SENSOR-TEMPERATURE (2-PIN) | ||
| 256-6454 | [2] | SENSOR-TEMPERATURE (2-PIN) | ||
| 261-6847 | [2] | ADAPTER | ||
| 305-6873 | [1] | SENSOR GP-PRESSURE | ||
| 320-3060 | [4] | SENSOR GP-PRESSURE | ||
| 320-3061 | [1] | SENSOR GP-PRESSURE | ||
| 320-3063 | [4] | SENSOR GP-PRESSURE | ||
| 330-9739 | [1] | ADAPTER | ||
| 335-3999 | [2] | CONNECTOR | ||
| 353-5439 | [2] | CONNECTOR | ||
| 353-5440 | [3] | ADAPTER | ||
| 353-5441 | [4] | ADAPTER-ELBOW | ||
| 356-6453 | [4] | BRACKET AS | ||
| 461-6632 Y | [1] | WIRING GP-ENGINE | ||
| 383-2990 | [16] | SENSOR GP-TEMPERATURE (THERMOCOUPLE) | ||
| 415-2432 | [2] | SENSOR GP-TEMPERATURE (EXHAUST) | ||
| (ABOVE PARTS ARE PART OF THE 376-4892 ENGINE WIRING GROUP) | ||||
| 0T-0065 | [4] | BOLT (3/8-16X3.5-IN) | ||
| 1B-9575 | [4] | BOLT (5/16-18X1.56-IN) | ||
| 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 8T-9655 | [8] | MOUNT-ISOLATION | ||
| 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 9X-6458 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 155-0576 | [8] | MOUNT-ISOLATION | ||
| 190-4885 | [4] | SPACER (11X22X50-MM THK) | ||
| 231-7070 | [1] | BRACKET | ||
| 353-8089 Y | [1] | CONTROL GP-UNPROGRAMMED | ||
| 488-4875 | [1] | CONTROL GP-UNPROGRAMMED | ||
| (ABOVE PARTS ARE PART OF THE 373-1527 ELECTRONIC CONTROL & MOUNTING GROUP) | ||||
| 381-3558 | [2] | TUBE AS | ||
| (ABOVE PARTS ARE PART OF THE 399-3107 FUEL MIXER GROUP) | ||||
| 165-3931 | [1] | BOLT (3/8-16X1.75-IN) | ||
| 0S-1588 | [1] | BOLT (3/8-16X1.25-IN) | ||
| 0S-1594 | [1] | BOLT (3/8-16X1-IN) | ||
| 1L-4031 | [1] | TEE-SERVICE | ||
| 3B-7749 | [1] | NIPPLE-PIPE | ||
| 4B-9030 | [1] | ELBOW | ||
| 4F-7391 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 4L-6454 | [1] | BOLT (3/8-16X1-IN) | ||
| 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-4869 | [8] | CLAMP-HOSE | ||
| 5P-9297 | [1] | CLIP (LOOP) | ||
| 6B-1628 | [1] | BUSHING-REDUCER | ||
| 6V-0267 | [1] | CLIP (TAB) | ||
| 6V-0268 | [1] | CLIP (SLOT) | ||
| 6V-3265 | [1] | CLIP | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 8C-6866 | [1] | CONNECTOR | ||
| 8C-6867 | [1] | CONNECTOR | ||
| 8C-6870 | [1] | CONNECTOR | ||
| 8N-8741 | [4] | HOSE | ||
| 8S-9191 | [1] | BOLT (3/8-16X4-IN) | ||
| 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 8T-6761 | [1] | PLUG-PIPE (1-11-1/2 NPT THD) | ||
| 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | ||
| 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 006-5707 | [1] | ELBOW-PIPE | ||
| 204-6707 | [1] | REGULATOR-WATER TEMPERATURE (129-DEG F) | ||
| 196-9420 | [1] | VALVE-BALL | ||
| 265-5254 | [1] | PLATE | ||
| 318-2484 | [1] | ORIFICE | ||
| 318-2485 | [1] | GASKET | ||
| 384-7876 | [1] | BRACKET | ||
| 397-9377 | [1] | BRACKET | ||
| 397-9378 I | [1] | HOSE AS | ||
| 397-9379 I | [1] | HOSE AS | ||
| 3S-9643 | [2] | SEAL-LIP TYPE | ||
| 6V-1454 | [2] | SEAL-O-RING | ||
| (ABOVE PARTS ARE PART OF THE 397-9380 WATER LINES GROUP) | ||||
| 3B-1915 | [8] | BOLT (3/8-16X1.375-IN) | ||
| 4L-7547 | [24] | STUD-TAPERLOCK (5/16-18X2-IN) | ||
| 5P-0600 | [2] | CLAMP-HOSE | ||
| 5S-0003 | [24] | NUT (5/16-18-THD) | ||
| 7E-8224 | [2] | HOSE-REDUCER | ||
| 9M-1974 | [24] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 113-1323 | [2] | GASKET | ||
| 388-2134 | [4] | BRACKET | ||
| (ABOVE PARTS ARE PART OF THE 389-0847 AIR SHUTOFF GROUP) | ||||
| 5P-4869 | [8] | CLAMP-HOSE | ||
| 8N-8741 | [4] | HOSE | ||
| 113-1323 | [2] | GASKET | ||
| (ABOVE PARTS ARE PART OF THE 391-3078 AIR LINES GROUP) | ||||
| 165-3929 | [8] | BOLT (3/8-16X1.5-IN) | ||
| 0S-1592 | [12] | BOLT (5/8-11X1.25-IN) | ||
| 1A-1460 | [2] | BOLT (1/2-13X2-IN) | ||
| 1F-7958 | [2] | NUT-FULL (1/2-13-THD) | ||
| 2H-3743 | [4] | BOLT (1-14X2-IN) | ||
| 2S-7593 | [12] | WASHER-HARD (17X35X5-MM THK) | ||
| 4M-6425 | [64] | BOLT (5/16-18X1-IN) | ||
| 5P-8250 | [4] | WASHER (28X49X5-MM THK) | ||
| 7D-1649 | [4] | WASHER-HARD (13.5X32X5-MM THK) | ||
| 8T-4224 | [128] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9X-6458 | [8] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 031-4155 | [64] | LOCKNUT (5/16-18-THD) | ||
| 111-5145 | [4] | CLAMP-HOSE | ||
| 116-8001 | [2] | GASKET | ||
| 382-5499 | [1] | BRACKET AS-SUPPORT (LH) | ||
| 382-5500 | [1] | BRACKET AS-SUPPORT (RH) | ||
| 383-2762 | [2] | ADAPTER AS | ||
| 386-3397 | [2] | BRACKET | ||
| 3S-9643 | [2] | SEAL-LIP TYPE | ||
| 6V-1454 | [2] | SEAL-O-RING | ||
| (ABOVE PARTS ARE PART OF THE 391-3080 PRECLEANER GROUP) | ||||
| 424-7719 Y | [1] | ACTUATOR GP-ELECTRONIC | ||
| H | PARTS MARKED H FOR USE WITH PIPE THREADS | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | PARTS MARKED J FOR USE WITHOUT PIPE THREADS | |||
| N | PARTS MARKED N FOR USE WITH PIPE THREADS | |||
| P | PARKS MARKED P FOR USE WITHOUT PIPE THREADS | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43640247
416-4348: KIT-FUEL SYSTEM PARTS
416-4348 KIT-FUEL SYSTEM PARTS -BLENDED FUEL
PART OF 416-4347 CONVERSION GP-BLENDED FUEL
FOR USE WITH ENGINE WITHOUT AIR SHUTOFF, MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS
PART OF 416-4347 CONVERSION GP-BLENDED FUEL
FOR USE WITH ENGINE WITHOUT AIR SHUTOFF, MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS
For full view, you need register
Parts for your 3512C PETROLEUM ENGINE:
CATERPILLAR SIS#SEBP43640248
416-4349: KIT-FUEL SYSTEM PARTS
416-4349 KIT-FUEL SYSTEM PARTS -BLENDED FUEL
PART OF 416-4347 CONVERSION GP-BLENDED FUEL
FOR USE WITH ENGINES WITH AIR SHUTOFF AND NO PRE-CLEANER, MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS
PART OF 416-4347 CONVERSION GP-BLENDED FUEL
FOR USE WITH ENGINES WITH AIR SHUTOFF AND NO PRE-CLEANER, MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS
For full view, you need register
Parts for your 3512C PETROLEUM ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 3B-1915 N | [8] | BOLT (3/8-16X1.375-IN) | ||
| 388-2134 N | [4] | BRACKET | ||
| 5P-0600 N | [2] | CLAMP-HOSE | ||
| 113-1323 N | [2] | GASKET | ||
| 7E-8224 N | [2] | HOSE-REDUCER | ||
| 5S-0003 N | [24] | NUT (5/16-18-THD) | ||
| 4L-7547 N | [24] | STUD-TAPERLOCK (5/16-18X2-IN) | ||
| 9M-1974 N | [24] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 5M-2894 N | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| N | PARTS MARKED N FOR USE WITH AIR SHUT OFF GROUP | |||
#SEBP43640249
417-4386: KIT-FUEL SYSTEM PARTS
417-4386 KIT-FUEL SYSTEM PARTS -BLENDED FUEL
PART OF 416-4347 CONVERSION GP-BLENDED FUEL
FOR USE WITH ENGINES WITH A FUEL HEATER, MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS
PART OF 416-4347 CONVERSION GP-BLENDED FUEL
FOR USE WITH ENGINES WITH A FUEL HEATER, MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS
For full view, you need register
Parts for your 3512C PETROLEUM ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 397-9378 I | [4] | HOSE AS | ||
| 397-9379 I | [1] | HOSE AS | ||
| 307-8764 I | [1] | HOSE AS | ||
| 307-9372 I | [1] | HOSE AS | ||
| 0S-1588 | [3] | BOLT (3/8-16X1.25-IN) | ||
| 1A-1460 | [3] | BOLT (1/2-13X2-IN) | ||
| 1B-2790 | [2] | BOLT (5/16-18X1.375-IN) | ||
| 1F-7958 | [2] | NUT-FULL (1/2-13-THD) | ||
| 5K-9090 | [4] | SEAL-O-RING | ||
| 5P-8245 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 5S-0003 | [2] | NUT (5/16-18-THD) | ||
| 7D-1649 | [4] | WASHER-HARD (13.5X32X5-MM THK) | ||
| 7D-4092 | [1] | CLIP | ||
| 7E-5639 | [1] | SPACER (13.88X21.34X25-MM THK) | ||
| 7G-1239 | [2] | SPACER (10.5X19X4.5-MM THK) | ||
| 8C-6875 | [4] | CONNECTOR | ||
| 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | ||
| 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 118-1656 | [1] | BUSHING-REDUCER | ||
| 122-3201 | [1] | NIPPLE-PIPE | ||
| 184-7211 | [2] | CLIP | ||
| 0S-1594 | [2] | BOLT (3/8-16X1-IN) | ||
| 4L-6454 | [3] | BOLT (3/8-16X1-IN) | ||
| 8S-9191 | [4] | BOLT (3/8-16X4-IN) | ||
| 384-7876 | [1] | BRACKET | ||
| 397-9377 | [2] | BRACKET | ||
| 5P-9297 | [3] | CLIP (LOOP) | ||
| 6V-0267 | [2] | CLIP (TAB) | ||
| 6V-0268 | [3] | CLIP (SLOT) | ||
| 6V-3265 | [3] | CLIP | ||
| 8C-6866 | [2] | CONNECTOR | ||
| 8C-6867 | [1] | CONNECTOR | ||
| 8C-6870 | [1] | CONNECTOR | ||
| 4B-9030 | [1] | ELBOW | ||
| 006-5707 | [1] | ELBOW-PIPE | ||
| 318-2485 | [1] | GASKET | ||
| 9S-8752 | [6] | NUT-FULL (3/8-16-THD) | ||
| 318-2484 | [1] | ORIFICE | ||
| 265-5254 | [2] | PLATE | ||
| 8T-6761 | [1] | PLUG-PIPE (1-11-1/2 NPT THD) | ||
| 4F-7391 | [1] | SEAL-O-RING | ||
| 4J-5477 | [2] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 1L-4031 | [1] | TEE-SERVICE | ||
| 196-9420 | [1] | VALVE-BALL | ||
| 5M-2894 | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 9X-6458 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
Information:
FUEL SYSTEM
FILTER GP-FUEL
Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Primary Filter - Clean/Inspect/Replace
3500 Petroleum Engines and Petroleum Generator Sets
3500 Petroleum Engines and Petroleum Generator Sets
Fuel System Fuel Filter Differential Pressure - Check
3500 Petroleum Engines and Petroleum Generator Sets
3500 Petroleum Engines and Petroleum Generator Sets
Fuel System Primary Filter (Water Separator) Element - Replace
3500 Generator Sets with Dynamic Gas Blending
3500 Generator Sets with Dynamic Gas Blending
Specifications
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Troubleshooting
Fuel Filter Is Restricted
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending
Disassembly and Assembly
