417-4387 KIT-FUEL SYSTEM PARTS MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS. PART OF 422-2059 CONVERSION AR-BLENDED FUEL FOR USE WITH ENGINE WITH JACKET WATER HEATER FIELD INSTALLATION 3512C

417-4387 KIT-FUEL SYSTEM PARTS
MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS.
PART OF 422-2059 CONVERSION AR-BLENDED FUEL
FOR USE WITH ENGINE WITH JACKET WATER HEATER
FIELD INSTALLATION

i05188002 SEBP4364

For full view, you need register

Parts for your 3512C PETROLEUM ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
0S-1585	[2]	BOLT (1/2-13X1.5-IN)
1H-5514	[2]	BOLT (5/16-18X1.625-IN)
118-1656	[1]	BUSHING-REDUCER
184-7211	[2]	CLIP
8C-6875	[4]	CONNECTOR
3B-6555	[1]	ELBOW
4B-9030	[1]	ELBOW
002-5743	[1]	ELBOW
397-9421 I	[1]	HOSE AS
397-9422 I	[1]	HOSE AS
122-3201	[1]	NIPPLE-PIPE
5S-0003	[2]	NUT (5/16-18-THD)
1F-7958	[2]	NUT-FULL (1/2-13-THD)
8T-6762	[1]	PLUG-PIPE (1/2-14-THD)
5K-9090	[4]	SEAL-O-RING
9R-2860	[2]	SPACER (11X16.5X11-MM THK)
1L-4031	[1]	TEE-SERVICE
196-9420	[2]	VALVE-BALL
7D-1649	[4]	WASHER-HARD (13.5X32X5-MM THK)
9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)
I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP43640251

417-4388: KIT-FUEL SYSTEM PARTS

KIT-FUEL SYSTEM PARTS

417-4388 KIT-FUEL SYSTEM PARTS
MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS.
PART OF 422-2059 CONVERSION AR-BLENDED FUEL
FOR USE WITH 7W-9269 LINES GP-AIR STARTING
FIELD INSTALLATION

i05188003 SEBP4364

For full view, you need register

Parts for your 3512C PETROLEUM ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
152-0199	[1]	ADAPTER
8S-9089	[4]	BOLT (1/2-13X4.5-IN)
391-3076	[1]	BRACKET AS
2T-2305	[1]	ELBOW
5B-7666	[3]	ELBOW
5B-7642	[1]	NIPPLE-PIPE
105-0428	[1]	NIPPLE-PIPE
9S-8752	[2]	NUT-FULL (3/8-16-THD)
6V-8397	[2]	SEAL-O-RING
9R-7882	[4]	SPACER (14X25X7-MM THK)
5L-2534	[1]	U-BOLT
4N-3411	[1]	VALVE GP-RELAY
7C-5105	[1]	KIT-VALVE SEAL (AIR STARTING)
7D-1649	[4]	WASHER-HARD (13.5X32X5-MM THK)
9X-6458	[2]	WASHER-HARD (10.2X22.5X3-MM THK)

#SEBP43640252

417-4389: KIT-FUEL SYSTEM PARTS

KIT-FUEL SYSTEM PARTS

417-4389 KIT-FUEL SYSTEM PARTS
MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS.
PART OF 422-2059 CONVERSION AR-BLENDED FUEL
FOR USE WITH 8N-8481 LINES GP-AIR STARTING
FIELD INSTALLATION

i05188004 SEBP4364

For full view, you need register

Parts for your 3512C PETROLEUM ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
5B-7666	[1]	ELBOW
6B-3685	[2]	ELBOW
6K-1972	[1]	ELBOW-FLARED
2L-2811	[1]	FITTING
6F-5985 I	[1]	HOSE AS
3L-1258	[2]	NIPPLE-PIPE
5B-7643	[1]	NIPPLE-PIPE
3J-7355	[1]	UNION-FLARED
I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP43640253

417-5465: KIT-FUEL SYSTEM PARTS

KIT-FUEL SYSTEM PARTS

417-5465 KIT-FUEL SYSTEM PARTS -BLENDED FUEL
MUST FOLLOW FLOW CHART LISTED IN INFORMATION RELEASE MEMO PELJ1457 TO CORRECTLY ORDER KITS.
PART OF 416-4346 CONVERSION AR-BLENDED FUEL, 423-5685 CONVERSION GP-BLENDED FUEL
FIELD INSTALLATION

i05188005 SEBP4364

For full view, you need register

Parts for your 3512C PETROLEUM ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
424-7719 Y	[1]	ACTUATOR GP-ELECTRONIC
0S-1585 H	[2]	BOLT (1/2-13X1.5-IN)
1A-8537 H	[2]	BOLT (5/8-11X2.75-IN)
2B-0947 H	[8]	BOLT (1/2-13X2.25-IN)
4K-0367 H	[8]	NUT-FULL (5/8-11-THD)
5P-8247 H	[16]	WASHER-HARD (17X32X3.5-MM THK)
8S-9092 H	[6]	BOLT (5/8-11X2.25-IN)
165-3929 H	[5]	BOLT (3/8-16X1.5-IN)
165-3931 H	[2]	BOLT (3/8-16X1.75-IN)
211-5237 H	[1]	CONNECTOR
444-7164 H	[1]	BRACKET
444-7165 H	[1]	BRACKET
444-9247 H	[1]	TUBE AS
0S-1587 HJ	[2]	BOLT (1/2-13X1.75-IN)
0S-1591 J	[5]	BOLT (3/8-16X1.5-IN)
0S-1594 HJ	[4]	BOLT (3/8-16X1-IN)
1A-2029 HJ	[2]	BOLT (3/8-16X1.125-IN)
1F-7958 J	[2]	NUT-FULL (1/2-13-THD)
2A-4639 HJ	[2]	BOLT (3/8-16X1.625-IN)
3B-1915 HJ	[1]	BOLT (3/8-16X1.375-IN)
5M-2894 HJ	[12]	WASHER-HARD (10.2X18.5X2.5-MM THK)
5P-3860 HJ	[6]	CLAMP-HOSE
5P-4869 HJ	[2]	CLAMP-HOSE
5S-0003 HJ	[4]	NUT (5/16-18-THD)
6V-1581 HJ	[2]	CLIP (SLOT)
6V-1582 HJ	[2]	CLIP (TAB)
6V-1612 HJ	[1]	BOLT (1/2-13X9.75-IN)
7D-1649 HJ	[5]	WASHER-HARD (13.5X32X5-MM THK)
7K-1401 HJ	[2]	CLIP
7K-1402 HJ	[2]	BRACKET
7M-1599 HJ	[4]	STUD-TAPERLOCK
9M-1974 HJ	[4]	WASHER-HARD (8.8X16X2-MM THK)
9S-8752 HJ	[11]	NUT-FULL (3/8-16-THD)
9X-6458 HJ	[15]	WASHER-HARD (10.2X22.5X3-MM THK)
105-8180 HJ	[1]	GASKET
145-5181 HJ	[1]	SPACER (13.5X25X12-MM THK)
255-6464 HJ	[2]	JOINT AS
		(EACH INCLUDES)
255-6466	[2]	SEAL
261-7951 HJ	[1]	JOINT AS-TUBE
261-7952	[2]	SEAL
388-1299 HJ	[2]	TUBE AS
388-1302 HJ	[1]	BRACKET
388-5372 HJ	[1]	TUBE AS
388-5374 J	[1]	BRACKET
388-5375 J	[1]	BRACKET
388-6418 HJ	[1]	BRACKET
388-6419 HJ	[1]	BRACKET
388-8893 HJ	[1]	BRACKET AS
388-8895 HJ	[1]	BRACKET AS
396-6986 HJ	[2]	HOSE
396-6987 HJ	[2]	HOSE-REDUCER
398-7716 J	[1]	TUBE AS
399-3106 HJ	[2]	TUBE AS
0S-1585 LV	[8]	BOLT (1/2-13X1.5-IN)
0S-1591 L	[8]	BOLT (3/8-16X1.5-IN)
2A-4639 LV	[8]	BOLT (3/8-16X1.625-IN)
2L-6055 LV	[1]	CAP-PIPE
2M-4108 L	[2]	GASKET
3B-1915 L	[6]	BOLT (3/8-16X1.375-IN)
3B-7286 L	[1]	NIPPLE-PIPE
3B-7296 L	[3]	FITTING (NIPPLE)
4P-8134 LV	[1]	CLIP (LADDER)
5B-5620 LV	[3]	BOLT (5/16-18X2.125-IN)
5M-2894 LV	[20]	WASHER-HARD (10.2X18.5X2.5-MM THK)
5P-8245 L	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
5S-0003 LV	[3]	NUT (5/16-18-THD)
6L-7322 L	[1]	TEE-PIPE
6N-4543 L	[1]	FITTING
6V-8398 LV	[2]	SEAL-O-RING
7D-1649 LV	[2]	WASHER-HARD (13.5X32X5-MM THK)
7X-7951 L	[3]	ELBOW-UNION
8S-9191 LV	[4]	BOLT (3/8-16X4-IN)
9M-1974 LV	[6]	WASHER-HARD (8.8X16X2-MM THK)
9S-8752 LV	[10]	NUT-FULL (3/8-16-THD)
9X-6138 L	[1]	PLUG-PIPE
9X-6458 LV	[16]	WASHER-HARD (10.2X22.5X3-MM THK)
105-8180 LV	[1]	GASKET
122-0089 LY	[1]	VALVE GP-SOLENOID
489-1434 VY	[1]	VALVE GP-SOLENOID (24-VOLT)
122-8905 L	[2]	ELBOW (90-DEG)
435-0888 V	[1]	REGULATOR GP-GAS PRESSURE
265-5255 L	[2]	PLATE
293-8396 L	[1]	CORE AS-FUEL COOLER
397-8628 L	[1]	TUBE AS
397-8629 L	[2]	BRACKET
397-8631 L	[1]	TUBE AS
397-8632 LV	[1]	BRACKET
417-5543 L	[1]	BRACKET AS
0L-1352 N	[1]	BOLT (3/8-16X3.25-IN)
165-3931 N	[13]	BOLT (3/8-16X1.75-IN)
0S-1585 N	[1]	BOLT (1/2-13X1.5-IN)
0S-1588 N	[2]	BOLT (3/8-16X1.25-IN)
0S-1594 N	[5]	BOLT (3/8-16X1-IN)
1A-2029 N	[19]	BOLT (3/8-16X1.125-IN)
1A-9579 N	[26]	BOLT (5/16-18X1.5-IN)
3A-3692 N	[2]	CLIP
3B-1915 N	[2]	BOLT (3/8-16X1.375-IN)
4P-7068 N	[1]	BRACKET
4P-7429 N	[3]	CLIP (LADDER)
4P-7581 N	[23]	CLIP (LADDER)
4P-8134 N	[47]	CLIP (LADDER)
4S-5719 N	[4]	SPACER (10.31X25X12.7-MM THK)
5M-2894 N	[57]	WASHER-HARD (10.2X18.5X2.5-MM THK)
5N-2126 N	[12]	CONNECTOR (THERMOCOUPLE)
6L-4428 N	[4]	STUD-TAPERLOCK (3/8-16X4.01-IN)
6V-1581 N	[1]	CLIP (SLOT)
6V-1582 N	[1]	CLIP (TAB)
6V-9028 N	[2]	SEAL-O-RING
6V-9330 N	[2]	ELBOW
6W-6672 N	[1]	SPACER (10.5X20X38-MM THK)
7K-1181 N	[82]	STRAP-CABLE
8M-9024 N	[1]	WASHER-HARD (10.2X22.5X5-MM THK)
9C-5344 N	[13]	SPACER (10.5X20X18-MM THK)
9M-1974 N	[28]	WASHER-HARD (8.8X16X2-MM THK)
9S-8752 N	[12]	NUT-FULL (3/8-16-THD)
9X-0262 N	[1]	ADAPTER
132-5789 N	[6]	CLIP (LADDER)
195-2431 N	[6]	SENSOR GP-DETONATION
		(EACH INCLUDES)
8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8T-8731	[1]	PLUG-CONNECTOR (3-PIN)
9X-1813 E		SLEEVE (16-CM)
214-7566 N	[8]	SEAL-O-RING
214-7568 N	[2]	SEAL-O-RING
228-7100 N	[9]	SEAL-O-RING
228-7101 N	[1]	SEAL-O-RING
238-5080 N	[4]	SEAL-O-RING
256-6453 N	[4]	SENSOR-TEMPERATURE (2-PIN)
261-6847 N	[2]	ADAPTER
415-2432 N	[2]	SENSOR GP-TEMPERATURE (EXHAUST)
305-6873 N	[1]	SENSOR GP-PRESSURE
294-3313 N	[1]	CLIP (LADDER)
318-1181 NY	[1]	SENSOR GP-SPEED (MAGNETIC)
320-3060 N	[4]	SENSOR GP-PRESSURE
320-3061 N	[1]	SENSOR GP-PRESSURE
320-3063 N	[4]	SENSOR GP-PRESSURE
330-9739 N	[1]	ADAPTER
335-3999 N	[2]	CONNECTOR
353-5439 N	[1]	CONNECTOR
353-5440 N	[2]	ADAPTER
353-5441 N	[5]	ADAPTER-ELBOW
461-1622 NY	[1]	HARNESS GP-WIRING
383-2990 N	[12]	SENSOR GP-TEMPERATURE (THERMOCOUPLE)
437-7386 N	[1]	FILM-IDENTIFICATION (CIRCUIT BREAKER)
0T-0065 P	[4]	BOLT (3/8-16X3.5-IN)
1B-9575 P	[4]	BOLT (5/16-18X1.56-IN)
1D-4540 P	[4]	BOLT (5/16-18X2.75-IN)
2V-4387 P	[4]	SPACER (10.312X25.4X23.11-MM THK)
6I-1418 P	[8]	SPACER (8.2X12.7X28.7-MM THK)
8T-9655 P	[8]	MOUNT-ISOLATION
9M-1974 P	[2]	WASHER-HARD (8.8X16X2-MM THK)
9N-0869 P	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
9X-6458 P	[4]	WASHER-HARD (10.2X22.5X3-MM THK)
155-0576 P	[8]	MOUNT-ISOLATION
190-4885 P	[4]	SPACER (11X22X50-MM THK)
231-7070 P	[1]	BRACKET
353-8089 PY	[1]	CONTROL GP-UNPROGRAMMED
488-4875 P	[1]	CONTROL GP-UNPROGRAMMED
1A-2029 S	[36]	BOLT (3/8-16X1.125-IN)
1C-2251 S	[6]	BOLT (3/8-16X1.87-IN)
2W-0752 S	[1]	GASKET
5L-5840 S	[6]	WASHER (9.25X16.92X1.83-MM THK)
5M-2894 S	[46]	WASHER-HARD (10.2X18.5X2.5-MM THK)
277-5833 S	[6]	SEAL
349-6052 S	[5]	COVER-CAMSHAFT
374-1513 S	[1]	COVER-CAMSHAFT
5P-8211 T	[2]	SEAL-O-RING
8B-4967 T	[2]	SEAL-O-RING
0S-1588 U	[3]	BOLT (3/8-16X1.25-IN)
2T-2305 U	[1]	ELBOW
3B-7738 U	[1]	FITTING
3B-7764 U	[1]	BUSHING (REDUCING)
4J-5477 U	[1]	SEAL-O-RING
5M-2894 U	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
6V-8397 U	[1]	SEAL-O-RING
6V-0267 U	[1]	CLIP (TAB)
6V-0268 U	[1]	CLIP (SLOT)
8C-6866 U	[1]	CONNECTOR
8T-6758 U	[1]	PLUG-PIPE (1/4-18-THD)
9L-1480 U	[1]	GASKET
9S-8752 U	[1]	NUT-FULL (3/8-16-THD)
9X-6458 U	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
004-5933 U	[1]	TEE-PIPE
174-5907 U	[1]	CLIP (LOOP)
301-7944 UI	[1]	HOSE AS
0S-1585 V	[8]	BOLT (1/2-13X1.5-IN)
3B-1915 V	[2]	BOLT (3/8-16X1.375-IN)
5P-8245 V	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
122-8905 V	[1]	ELBOW (90-DEG)
165-3929 V	[10]	BOLT (3/8-16X1.5-IN)
293-4056 V	[2]	GASKET
420-8789 V	[2]	GASKET
425-3549 V	[2]	GASKET
440-4786 V	[1]	BRACKET AS
440-4788 V	[1]	TUBE AS
440-4791 V	[1]	TUBE AS
440-4792 V	[2]	BRACKET
440-4794 V	[1]	TUBE AS
450-2989 V	[1]	TUBE AS
450-3143 V	[1]	BRACKET AS
E		ORDER BY THE CENTIMETER
H		PARTS MARKED H FOR USE WITH FUEL LINES GROUP 444-9249
I		REFER TO HYDRAULIC INFORMATION SYSTEM
J		PARTS MARKED J FOR USE WITH FUEL LINES GROUP 388-5370
L		PARTS MARKED L FOR USE WITH VALVE MOUNTING GROUP 397-8633
N		PARTS MARKED N FOR USE WITH WIRING GROUP 380-5440
P		PARTS MARKED P FOR USE WITH CONTROL GROUP 373-1527 & 393-0055
R		REMANUFACTURED PART MAY BE AVAILABLE
S		PARTS MARKED S FOR USE WITH COVER GROUP 390-4500
T		PARTS MARKED T FOR YOU WITH FUEL MIXER GROUP 399-3777
U		PARTS MARKED U FOR USE WITH PARTICLE DECTECTOR GROUP 392-5541
V		PARTS MARKED V FOR USE WITH VALVE MOUNTING GROUP 440-4790
Y		SEPARATE ILLUSTRATION

#SEBP43640254

5N-2438: LINES GP-FLEXIBLE FUEL

LINES GP-FLEXIBLE FUEL

5N-2438 LINES GP-FLEXIBLE FUEL
AN ATTACHMENT

i00384663 SEBP4364

5N2438 LINES GP-FLEXIBLE FUEL Parts scheme

For full view, you need register

Parts for your 3512C PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3N-6504 I	[1]	HOSE AS
2.	8N-1186 I	[1]	HOSE AS
3.	5F-5990 B	[2]	CLIP
	B		USE AS REQUIRED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP43640255

262-6760: LINES GP-FUEL INJECTION

LINES GP-FUEL INJECTION

262-6760 LINES GP-FUEL INJECTION
Type 1

i02247918 SEBP4364

2626760 LINES GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 3512C PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-0692	[16]	CLAMP AS
			(EACH INCLUDES)
	108-1434	[1]	GROMMET
2.	4P-0693	[4]	CLAMP AS
			(EACH INCLUDES)
	108-1434	[2]	GROMMET
3.	6B-6205	[2]	SPACER (0.438X0.875X1.281-IN THK)
4.	6V-4363	[1]	ELBOW (SPL)
5.	7C-7677	[12]	TUBE AS
6.	7C-7678	[12]	TUBE AS
7.	7C-7682	[1]	ADAPTER-FUEL MANIFOLD (RH)
8.	7C-7683	[1]	ADAPTER-FUEL MANIFOLD (LH)
9.	7E-3921	[1]	VALVE-CHECK
10.	7W-2122	[24]	CONNECTOR-PORT
11.	8N-6210	[1]	BRACKET-LINE SUPPORT
12.	8N-6211	[1]	PLATE-LINE SUPPORT
13.	8N-6326	[1]	TUBE AS
14.	8N-6327	[1]	TUBE AS
15.	9N-4053	[1]	SPRING
16.	030-7977	[1]	ELBOW
17.	111-3388	[1]	TUBE AS
18.	111-3389	[1]	TUBE AS
19.	114-5477	[1]	PLUNGER-VALVE
20.	156-9753 Y	[1]	MANIFOLD GP-FUEL (RH)
21.	156-9754 Y	[1]	MANIFOLD GP-FUEL (LH)
22.	237-2713	[1]	TUBE AS
23.	030-7949	[3]	ELBOW
24.	030-7972	[1]	ELBOW
25.	0L-2070	[5]	BOLT (3/8-16X2.25-IN)
26.	0S-1590	[3]	BOLT (3/8-16X2-IN)
27.	0S-1594	[1]	BOLT (3/8-16X1-IN)
28.	0T-0065	[4]	BOLT (3/8-16X3.5-IN)
29.	1D-4539	[1]	BOLT (5/16-18X2.5-IN)
30.	1D-4541	[1]	BOLT (5/16-18X3-IN)
31.	2P-1296	[1]	TEE
32.	2P-7636	[1]	CONNECTOR (3/4-16 STR-THD)
33.	5M-2894	[13]	WASHER-HARD (10.2X18.5X2.5-MM THK)
34.	5P-4900	[1]	ELBOW-FLARED
35.	5S-0003	[1]	NUT (5/16-18-THD)
36.	6V-4589	[9]	SEAL-O-RING
37.	6V-5048	[1]	SEAL-O-RING
38.	6V-5049	[25]	SEAL-O-RING
39.	7K-3377	[2]	PIPE
40.	7N-6806	[4]	SEAL-RECTANGULAR
41.	8L-2786	[1]	SEAL-O-RING
42.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
43.	9M-4584	[2]	CONNECTOR
44.	9S-4182	[1]	PLUG (7/16-20-THD)
45.	9S-4191	[1]	PLUG (9/16-18-THD)
	Y		SEPARATE ILLUSTRATION

#SEBP43640256

262-6760: LINES GP-FUEL INJECTION

LINES GP-FUEL INJECTION

262-6760 LINES GP-FUEL INJECTION
Type 2

i02633962 SEBP4364

For full view, you need register

Parts for your 3512C PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-0692	[16]	CLAMP AS
			(EACH INCLUDES)
	108-1434	[1]	GROMMET
2.	4P-0693	[4]	CLAMP AS
			(EACH INCLUDES)
	108-1434	[2]	GROMMET
3.	6B-6205	[2]	SPACER (0.438X0.875X1.281-IN THK)
4.	6V-4363	[1]	ELBOW (SPL)
5.	7C-7677	[12]	TUBE AS
6.	7C-7678	[12]	TUBE AS
7.	7C-7682	[1]	ADAPTER-FUEL MANIFOLD (RH)
8.	7C-7683	[1]	ADAPTER-FUEL MANIFOLD (LH)
9.	7E-3921	[1]	VALVE-CHECK
10.	7W-2122	[24]	CONNECTOR-PORT
11.	8N-6210	[1]	BRACKET-LINE SUPPORT
12.	8N-6211	[1]	PLATE-LINE SUPPORT
13.	8N-6326	[1]	TUBE AS
14.	8N-6327	[1]	TUBE AS
15.	9N-4053	[1]	SPRING
16.	030-7977	[1]	ELBOW
17.	111-3388	[1]	TUBE AS
18.	111-3389	[1]	TUBE AS
19.	114-5477	[1]	PLUNGER-VALVE
20.	156-9753 Y	[1]	MANIFOLD GP-FUEL (RH)
21.	156-9754 Y	[1]	MANIFOLD GP-FUEL (LH)
22.	237-2713	[1]	TUBE AS
23.	386-6229	[3]	ELBOW AS
			(EACH INCLUDES)
	250-1497	[1]	ELBOW
	238-5081	[1]	SEAL-O-RING
24.	030-7972	[1]	ELBOW
25.	0L-2070	[5]	BOLT (3/8-16X2.25-IN)
26.	0S-1590	[3]	BOLT (3/8-16X2-IN)
27.	0S-1594	[1]	BOLT (3/8-16X1-IN)
28.	0T-0065	[4]	BOLT (3/8-16X3.5-IN)
29.	1D-4539	[1]	BOLT (5/16-18X2.5-IN)
30.	1D-4541	[1]	BOLT (5/16-18X3-IN)
31.	250-1499	[1]	TEE
32.	2P-7636	[1]	CONNECTOR (3/4-16 STR-THD)
33.	5M-2894	[13]	WASHER-HARD (10.2X18.5X2.5-MM THK)
34.	250-1496 C	[1]	ELBOW
35.	5S-0003	[1]	NUT (5/16-18-THD)
36.	238-5081	[6]	SEAL-O-RING
37.	214-7566	[1]	SEAL-O-RING
38.	214-7568	[25]	SEAL-O-RING
39.	7K-3377	[2]	PIPE
40.	7N-6806	[4]	SEAL-RECTANGULAR
41.	238-5080	[1]	SEAL-O-RING
42.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
43.	9M-4584	[2]	CONNECTOR
44.	9S-4182	[1]	PLUG (7/16-20-THD)
45.	9S-4191	[1]	PLUG (9/16-18-THD)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP43640257

156-9753: MANIFOLD GP-FUEL

MANIFOLD GP-FUEL

156-9753 MANIFOLD GP-FUEL -RH
PART OF 262-6760 LINES GP-FUEL INJECTION

i01107913 SEBP4364

For full view, you need register

Parts for your 3512C PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-0047	[6]	CLAMP
2.	147-3745	[6]	WASHER-RETAINING
3.	156-9748	[6]	CLAMP
4.	100-3237	[12]	GROMMET
5.	1D-4539	[6]	BOLT (5/16-18X2.5-IN)
6.	9N-0869	[6]	WASHER-HARD (8.8X25.5X2-MM THK)

#SEBP43640258

156-9754: MANIFOLD GP-FUEL

MANIFOLD GP-FUEL

156-9754 MANIFOLD GP-FUEL -LH
PART OF 262-6760 LINES GP-FUEL INJECTION

i01107923 SEBP4364

For full view, you need register

Parts for your 3512C PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-0047	[6]	CLAMP
2.	147-3745	[6]	WASHER-RETAINING
3.	156-9748	[6]	CLAMP
4.	100-3237	[12]	GROMMET
5.	1D-4539	[6]	BOLT (5/16-18X2.5-IN)
6.	9N-0869	[6]	WASHER-HARD (8.8X25.5X2-MM THK)

#SEBP43640259

254-1417: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

254-1417 PUMP GP-FUEL INJECTION
S/N LLA1-3077

i02270226 SEBP4364

2541417 PUMP GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 3512C PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-2580	[1]	CLAMP-INJECTOR
2.	7N-5487	[1]	WASHER (12X22X9.5-MM THK)
3.	234-4182	[1]	PLUG
4.	246-1854	[1]	INJECTOR GP-FUEL
4A.	245-4907	[1]	SEAL-O-RING
4B.	245-4908	[1]	SEAL-O-RING
5.	7F-8698	[1]	BOLT (7/16-14X3.5-IN)
	R		REMANUFACTURED PART MAY BE AVAILABLE

Information:

FUEL SYSTEM

FUEL SYSTEM GP

Engine News

Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3512C Engines {1000, 1250}
2013/07/11

Special Instruction

Retrofitting for the Dynamic Gas Blending Capability on Certain 3512B and 3512C Engines {1000, 1250}
Retrofitting for the Dynamic Gas Blending Capability on Certain 3512B and 3512C Engines {1000, 1250}

Dynamic Gas Blending Land Drilling Gas Supply Pressure Monitor Installation {1270, 1718}
Dynamic Gas Blending Land Drilling Gas Supply Pressure Monitor Installation {1270, 1718}

Technical Information Bulletin

Certain Cat<SUP>®</SUP> Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713}
Certain Cat^® Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713}

Tool Operating Manual

NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}

370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}

Caterpillar Parts SIS Catalog 3512C :

417-4386 KIT-FUEL SYSTEM PARTS

416-4349 KIT-FUEL SYSTEM PARTS

416-4348 KIT-FUEL SYSTEM PARTS

398-2069 KIT-FUEL SYSTEM PARTS

397-2960 KIT-FUEL SYSTEM PARTS

392-0219 INJECTOR GP-FUEL

386-1771 INJECTOR GP-FUEL

188-9765 FILTER GP-WATER SEP & FUEL

417-4388 KIT-FUEL SYSTEM PARTS

417-4389 KIT-FUEL SYSTEM PARTS

417-5465 KIT-FUEL SYSTEM PARTS

5N-2438 LINES GP-FLEXIBLE FUEL

262-6760 LINES GP-FUEL INJECTION

156-9753 MANIFOLD GP-FUEL

156-9754 MANIFOLD GP-FUEL