ELECTRICAL AND STARTING SYSTEM
HARNESS GPHEATER GP
ELECTRICAL AND STARTING SYSTEM
HARNESS GP#SEBP43711000
421-5674: HARNESS AS-WIRING
421-5674 HARNESS AS-WIRING -JUMPER
S/N SBK1-UP
600-VOLT
PART OF 422-6105 WIRING GP-GENERATOR
AN ATTACHMENT
S/N SBK1-UP
600-VOLT
PART OF 422-6105 WIRING GP-GENERATOR
AN ATTACHMENT
Parts for your 3516C GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2265 | [2] | KIT-CONNECTING PLUG (8-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3402 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [8] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP43711001
441-6502: HARNESS AS-WIRING
441-6502 HARNESS AS-WIRING
S/N SBK1-UP
PART OF 441-6500 WIRING GP-GENERATOR
FOR USE WITH MEDIUM VOLTAGE
AN ATTACHMENT
S/N SBK1-UP
PART OF 441-6500 WIRING GP-GENERATOR
FOR USE WITH MEDIUM VOLTAGE
AN ATTACHMENT
Parts for your 3516C GENERATOR SET:
CATERPILLAR SIS#SEBP43711002
446-7610: HARNESS AS-WIRING
446-7610 HARNESS AS-WIRING -VOLTAGE SENSING
S/N SBK1-UP
PART OF 441-6506 CONTROL GP-VOLTAGE
FOR USE WITH MEDIUM VOLTAGE GENERATOR
AN ATTACHMENT
S/N SBK1-UP
PART OF 441-6506 CONTROL GP-VOLTAGE
FOR USE WITH MEDIUM VOLTAGE GENERATOR
AN ATTACHMENT
Parts for your 3516C GENERATOR SET:
CATERPILLAR SIS#SEBP43711003
461-7504: HARNESS AS-WIRING
461-7504 HARNESS AS-WIRING -MEDIUM VOLTAGE
S/N G8A1-UP; G8B1-UP; G8C1-UP; G8D1-UP; G9E1-UP
3000-FRAME
PART OF 461-4354, 461-6534 WIRING GP-GENERATOR
AN ATTACHMENT
S/N G8A1-UP; G8B1-UP; G8C1-UP; G8D1-UP; G9E1-UP
3000-FRAME
PART OF 461-4354, 461-6534 WIRING GP-GENERATOR
AN ATTACHMENT
Parts for your 3516C GENERATOR SET:
CATERPILLAR SIS#SEBP43711004
506-5685: HARNESS AS-WIRING
506-5685 HARNESS AS-WIRING
S/N G4B1-UP; KHD1-UP
PART OF 506-5684 WIRING GP-GENERATOR
AN ATTACHMENT
S/N G4B1-UP; KHD1-UP
PART OF 506-5684 WIRING GP-GENERATOR
AN ATTACHMENT
Parts for your 3516C GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 351-9187 | [1] | CONNECTOR | ||
| 110-8714 | [17] | END-WIRE (18-GA) | ||
| 113-8961 | [1] | END-WIRE (10-GA) | ||
| 109-3038 | [21] | END-WIRE (16-GA) | ||
| 112-7497 | [2] | END-WIRE (14-GA) | ||
| 366-9370 | [1] | PLUG AS (3-WAY) | ||
| 416-1367 | [1] | CONNECTOR AS | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 416-1334 | [1] | SEAL-WIRE | ||
| 9X-3402 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [8] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3S-2093 B | [5] | STRAP-CABLE | ||
| 131-1497 | [1] | TERMINAL AS-RING (10-GA TO 12-GA) | ||
| 2L-8068 | [1] | TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM) | |||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP43711005
269-3349: HEATER GP-JACKET WATER
269-3349 HEATER GP-JACKET WATER
S/N SBK1-UP
240-VOLT AC, 9-KILOWATT
FIELD REPLACEMENT ORDER @@@@@307-3264@@@@@
AN ATTACHMENT
S/N SBK1-UP
240-VOLT AC, 9-KILOWATT
FIELD REPLACEMENT ORDER @@@@@307-3264@@@@@
AN ATTACHMENT
Parts for your 3516C GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 149-2285 | [1] | PUMP (CIRCULATION) | |
| 2. | 237-4358 | [1] | THERMOSTAT (120 DEG F)(JACKET WATER HEATER) | |
| 3. | 237-0928 | [1] | ELEMENT-HEATING (240-VOLT, 9000-WATT)(JACKET WATER HEATER) | |
| 4. | 8T-8916 | [4] | BOLT (7/16-14X1.5-IN) | |
| 5. | 6V-5729 | [4] | LOCKNUT (7/16-14-THD) | |
| 6. | 196-2343 | [1] | KIT-CLAMP | |
| (KIT INCLUDES TWO CLAMPS) | ||||
| 7. | 300-3506 | [1] | KIT-FLANGE | |
| 8. | 300-3507 | [1] | BRACKET-MOUNTING | |
| 9. | 300-3508 Y | [1] | BOX GP-CONTROL (JACKET WATER HEATER) | |
| 10. | 8T-4205 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 11. | 6V-8185 | [4] | NUT (1/4-20-THD) | |
| 12. | 4M-5281 | [4] | BOLT (1/4-20X0.75-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43711006
291-5105: HEATER GP-JACKET WATER
291-5105 HEATER GP-JACKET WATER
S/N SBK1-UP
240-VOLT, 9-KILOWATT
AN ATTACHMENT
S/N SBK1-UP
240-VOLT, 9-KILOWATT
AN ATTACHMENT
Parts for your 3516C GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 291-5103 | [1] | PUMP (CIRCULATION) | |
| 2. | 191-5079 | [2] | SEAL | |
| 3. | 237-4358 | [1] | THERMOSTAT (120 DEG F)(JACKET WATER HEATER) | |
| 4. | 237-0929 | [1] | ELEMENT-HEATING (240-VOLT, 9000-WATT) | |
| 5. | 4L-9337 | [4] | BOLT (3/8-16X1.5-IN) | |
| 6. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 7. | 300-3506 | [2] | KIT-FLANGE | |
| 8. | 196-2343 | [1] | KIT-CLAMP | |
| (INCLUDES CLAMPS) | ||||
| 9. | 300-3507 | [1] | BRACKET-MOUNTING | |
| 10. | 300-3508 Y | [1] | BOX GP-CONTROL (JACKET WATER HEATER) | |
| 11. | 300-3510 | [1] | CONTACTOR | |
| 12. | 175-7409 | [1] | BLOCK-TERMINAL | |
| 13. | 300-3505 | [2] | SEAL-O-RING | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43711007
307-3264: HEATER GP-JACKET WATER
307-3264 HEATER GP-JACKET WATER
S/N SBK1-UP
240-VOLT AC, 9-KILOWATT
FIELD REPLACEMENT FOR @@@@@269-3349@@@@@
AN ATTACHMENT
S/N SBK1-UP
240-VOLT AC, 9-KILOWATT
FIELD REPLACEMENT FOR @@@@@269-3349@@@@@
AN ATTACHMENT
Parts for your 3516C GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 149-2285 | [1] | PUMP (CIRCULATION) | |
| 2. | 300-3506 | [1] | KIT-FLANGE | |
| 3. | 300-3507 | [1] | BRACKET-MOUNTING | |
| 4. | 300-3508 Y | [1] | BOX GP-CONTROL (JACKET WATER HEATER) | |
| 5. | 300-4967 | [1] | THERMOSTAT (90 DEG F TO 130 DEG F) | |
| 6. | 307-3276 Y | [1] | ELEMENT GP-JACKET WATER HEATER (240-VOLT, 9000-WATT)(240-VOLT, 9000-WATT) | |
| 7. | 8T-8916 | [4] | BOLT (7/16-14X1.5-IN) | |
| 8. | 4M-5281 | [4] | BOLT (1/4-20X0.75-IN) | |
| 9. | 6V-8185 | [4] | NUT (1/4-20-THD) | |
| 10. | 6V-5729 | [4] | LOCKNUT (7/16-14-THD) | |
| 11. | 8T-4205 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 12. | 196-2343 | [1] | KIT-CLAMP | |
| 13. | 300-3510 | [1] | CONTACTOR | |
| 14. | 7X-0546 | [8] | WASHER-HARD (12X25.5X2-MM THK) | |
| 15. | 3B-7749 | [1] | NIPPLE-PIPE | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43711008
307-3265: HEATER GP-JACKET WATER
307-3265 HEATER GP-JACKET WATER
S/N SBK1-UP
220-VOLT AC, 9-KILOWATT
AN ATTACHMENT
S/N SBK1-UP
220-VOLT AC, 9-KILOWATT
AN ATTACHMENT
Parts for your 3516C GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 291-5103 | [1] | PUMP (CIRCULATION) | |
| 2. | 300-3506 | [1] | KIT-FLANGE (JACKET WATER HEATER) | |
| 3. | 300-3507 | [1] | BRACKET-MOUNTING | |
| 4. | 300-3508 Y | [1] | BOX GP-CONTROL (JACKET WATER HEATER) | |
| 5. | 300-4967 | [1] | THERMOSTAT (90 DEG F TO 130 DEG F) | |
| 6. | 307-3275 Y | [1] | ELEMENT GP-JACKET WATER HEATER (220-VOLT, 9000-WATT) | |
| 7. | 8T-8916 | [4] | BOLT (7/16-14X1.5-IN) | |
| 8. | 4M-5281 | [4] | BOLT (1/4-20X0.75-IN) | |
| 9. | 6V-8185 | [4] | NUT (1/4-20-THD) | |
| 10. | 6V-5729 | [4] | LOCKNUT (7/16-14-THD) | |
| 11. | 8T-4205 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 12. | 196-2343 | [1] | KIT-CLAMP | |
| (INCLUDES CLAMPS) | ||||
| 13. | 300-3510 | [1] | CONTACTOR | |
| 14. | 7X-0546 | [8] | WASHER-HARD (12X25.5X2-MM THK) | |
| 15. | 3B-7749 | [1] | NIPPLE-PIPE | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43711009
325-6248: HEATER GP-JACKET WATER
325-6248 HEATER GP-JACKET WATER
S/N SBK1-UP
208-VOLT AC, 9-KILOWATT
AN ATTACHMENT
S/N SBK1-UP
208-VOLT AC, 9-KILOWATT
AN ATTACHMENT
Parts for your 3516C GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 149-2285 | [1] | PUMP (CIRCULATION) | |
| 2. | 300-3506 | [1] | KIT-FLANGE | |
| 3. | 300-3507 | [1] | BRACKET-MOUNTING | |
| 4. | 300-3508 Y | [1] | BOX GP-CONTROL (JACKET WATER HEATER) | |
| 5. | 300-4967 | [1] | THERMOSTAT (90 DEG F TO 130 DEG F) | |
| 6. | 325-6246 Y | [1] | ELEMENT GP-JACKET WATER HEATER | |
| 7. | 8T-8916 | [4] | BOLT (7/16-14X1.5-IN) | |
| 8. | 4M-5281 | [4] | BOLT (1/4-20X0.75-IN) | |
| 9. | 6V-8185 | [4] | NUT (1/4-20-THD) | |
| 10. | 6V-5729 | [4] | LOCKNUT (7/16-14-THD) | |
| 11. | 8T-4205 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 12. | 196-2343 | [1] | KIT-CLAMP | |
| 13. | 326-9502 | [1] | KIT-RESERVOIR | |
| (INCLUDES PLUG, SCREWS, & SEAL) | ||||
| 14. | 325-6247 | [1] | CONTACTOR | |
| 15. | 7X-0546 | [8] | WASHER-HARD (12X25.5X2-MM THK) | |
| 16. | 3B-7749 | [1] | NIPPLE-PIPE | |
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
HARNESS GP
Special Instruction
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}