298-5110 GEAR GP-FRONT S/N 44424500-UP; RTX1-UP AN ATTACHMENT C4.4 ENGINE - MACHINE



BASIC ENGINE
GEAR GP
FLYWHEEL GP
AIR COMPRESSOR GP
GUARD GP-BELT
DAMPER GP

ENGINE - MACHINE C4.4 ENGINE - MACHINE 444
 SPF343C Trailer Mounted Pumper 44424500-UP SEBP4372 C4.4 444   (2018)

BASIC ENGINE

GEAR GP
GEAR GP-FRONT
298-5110 GEAR GP-FRONT
GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
GEAR GP-REAR
175-5204 GEAR GP-REAR
HOUSING GP-FRONT
415-7117 HOUSING GP-FRONT
HOUSING GP-FRONT
4P-5426 HOUSING GP-FRONT
 

#SEBP43720100
 

298-5110: GEAR GP-FRONT

298-5110 GEAR GP-FRONT
S/N 44424500-UP; RTX1-UP
AN ATTACHMENT
i02604327 SEBP4372
2985110 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 6I-0217 M [6] BOLT (M8X1.25X20-MM)  
2. 6I-0645 M [4] BOLT (M8X1.25X25-MM)  
3. 6I-0650 M [3] BOLT (M10X1.5X65-MM)  
4. 7C-4616 M [1] BOLT (M12X1.75X45-MM)  
5. 067-6179 [1] DOWEL  
6. 100-3751 M [5] BOLT (M8X1.25X65-MM)  
7. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
8. 101-3895 M [2] BOLT (M8X1.25X35-MM)  
9. 124-3815 M [9] BOLT (M8X1.25X16-MM)  
10. 133-1011 [1] WASHER  
11. 425-7103 [1] GEAR (68-TEETH)  
12. 226-8767 [1] COVER AS-FRONT  
12A. 226-8766 [1] GASKET-COVER  
13. 232-3666 [1] WASHER-THRUST  
14. 251-4336 [1] GEAR AS-IDLER (73-TEETH)  
15. 277-3012 [1] GASKET-COVER (HOUSING)  
16. 324-0444 [1] HUB-IDLER GEAR  
17. 288-0422 [1] SEAL-CRANKSHAFT  
18. 323-3515 [1] HOUSING-FRONT  
19. 346-0408 [1] PLATE  
   
  225-6522 ABF [1] PLUG-CUP  
    (ALSO ORDER IF ONLY ORDERING HOUSING-FRONT)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP43720101
 

8N-7174: GEAR GP-FRONT

8N-7174 GEAR GP-FRONT
S/N R2A1-UP
i02292908 SEBP4372
8N7174 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 2W-2895 [1] GEAR-CRANKSHAFT (92-TEETH)  
2. 5R-7136 [1] WASHER-SEALING  
3. 5R-7137 [2] WASHER-SEALING  
4. 7C-3258 [1] WASHER AS-THRUST  
4A. 7N-2047 [1] DOWEL  
5. 7C-3260 [1] SHAFT  
6. 7E-0275 [1] GEAR-WATER PUMP DRIVE (69-TEETH)  
7. 7N-5239 [1] SHAFT AS-PUMP DRIVE  
7A. 8T-2153 [1] SETSCREW-SOCKET (1/4-28X0.31-IN)  
8. 7N-5245 [1] ADAPTER AS-PUMP (WATER)  
8A. 127-5400 [1] BUSHING  
9. 7N-5246 [2] WASHER-THRUST  
10. 144-8263 C [1] GEAR AS-IDLER (53-TEETH)  
10A. 140-9597 [1] BUSHING  
11. 235-3546 [1] SEAL-O-RING  
12. 259-4598 [2] SEAL-O-RING  
13. 278-4287 [1] ADAPTER AS-PUMP (OIL)  
13A. 127-5400 [1] BUSHING  
14. 0S-1590 [5] BOLT (3/8-16X2-IN)  
15. 0S-1594 [2] BOLT (3/8-16X1-IN)  
16. 0T-0055 [1] BOLT (3/8-16X4.25-IN)  
17. 3S-1307 [12] BOLT-12 POINT HEAD (3/8-16X2-IN)  
18. 4B-3388 [4] BOLT (5/16-18X1.125-IN)  
19. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 6V-3348 [1] SEAL-O-RING  
22. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
23. 9X-8879 [2] BOLT (1/2-13X5.5-IN)  
24. 6K-3771 BC [12] BOLT-12 POINT HEAD (7/16-14X1.5-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP43720102
 

175-5204: GEAR GP-REAR

175-5204 GEAR GP-REAR -CAMSHAFT DRIVE
S/N R2A1-UP
i01143026 SEBP4372
1755204 GEAR GP-REAR Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 3S-1307 [12] BOLT-12 POINT HEAD (3/8-16X2-IN)  
2. 175-5200 [1] GEAR AS-IDLER (92, 35-TEETH)  
2A. 101-1372 [1] BUSHING  
3. 101-1366 [1] SHAFT-GEAR (CLUSTER)  
4. 8M-2530 [4] BOLT-12 POINT HEAD (1/2-13X1.25-IN)  
5. 101-1365 [1] PLATE-THRUST  
6. 0L-1351 [4] BOLT (3/8-16X0.875-IN)  
7. 175-5197 [2] GEAR AS-IDLER (69-TEETH)  
    (EACH INCLUDES)
7A. 125-9751 [1] BUSHING  
8. 101-1367 [2] SHAFT-IDLER  
9. 5P-8248 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
10. 9X-8887 [2] BOLT (3/4-10X3-IN)  
11. 1B-4367 [4] BOLT (5/8-11X3-IN)  
12. 101-1368 [2] WASHER-THRUST (19.5X106X1.9-MM THK)  
13. 175-5201 [2] GEAR-CAMSHAFT (70-TEETH)  
14. 4W-4586 [1] PLATE  
15. 101-1370 [1] GEAR-CRANKSHAFT (92-TEETH)  
16. 8S-2331 [2] BOLT-12 POINT HEAD (5/8-11X2-IN)  
17. 7E-5324 [1] RING  
 

#SEBP43720103
 

4N-9680: GOVERNOR GP-AIR COMPRESSOR

4N-9680 GOVERNOR GP-AIR COMPRESSOR
S/N R2A1-UP
PART OF 1W-8924 AIR COMPRESSOR GP
i02145533 SEBP4372
4N9680 GOVERNOR GP-AIR COMPRESSOR Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 2S-2923 [1] COVER AS (GOVERNOR)  
  2K-8198 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  9M-0402 [1] KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)  
    (INCLUDES GROMMETS, FILTERS, SPRING, VALVES, COVER, RING & GASKET)
 

#SEBP43720104
 

151-9228: GUARD GP-BELT

151-9228 GUARD GP-BELT -ALTERNATOR
S/N R2A1-UP
i01442458 SEBP4372
1519228 GUARD GP-BELT Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 171-1359 [1] GUARD AS-BELT (ALTERNATOR AIR)  
2. 8T-2501 [2] BOLT (3/8-16X2-IN)  
3. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 5P-2566 [1] BOLT (1/2-13X1.5-IN)  
5. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
 

#SEBP43720105
 

307-1569: GUARD GP-BELT

307-1569 GUARD GP-BELT -ALTERNATOR
S/N RTX1-UP
AN ATTACHMENT
i02680449 SEBP4372
3071569 GUARD GP-BELT Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 302-7332 [1] GUARD-ALTERNATOR  
2. 0S-1585 [1] BOLT (1/2-13X1.5-IN)  
3. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
 

#SEBP43720106
 

7W-5780: GUARD GP-BELT

7W-5780 GUARD GP-BELT -ALTERNATOR
S/N R2A1-311
i00091726 SEBP4372
7W5780 GUARD GP-BELT Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 9V-4924 [2] SPACER (13.8X28X11.5-MM THK)  
2. 288-6174 [1] GUARD AS-ALTERNATOR  
3. 119-9443 [2] SEAL-O-RING  
 

#SEBP43720107
 

7W-5780: GUARD GP-BELT

7W-5780 GUARD GP-BELT -ALTERNATOR
S/N R2A312-UP
i05255721 SEBP4372
7W5780 GUARD GP-BELT Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 9V-4924 [2] SPACER (13.8X28X11.5-MM THK)  
2. 501-6696 C [1] GUARD AS-ALTERNATOR  
3. 5P-8245 C [2] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 1F-7958 C [2] NUT-FULL (1/2-13-THD)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP43720108
 

284-2976: GUARD GP-DAMPER

284-2976 GUARD GP-DAMPER
S/N RTX1-UP
PART OF 271-0281, 287-7455, 323-3936, 388-5000, 471-7805 GENERAL AR
i02475237 SEBP4372
2842976 GUARD GP-DAMPER Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 1P-7115 [4] GROMMET AS  
2. 7W-3031 [2] BRACKET  
3. 7W-3032 [2] BRACKET  
4. 335-0782 [1] GUARD AS-DAMPER  
5. 2K-4973 [4] LOCKNUT (3/8-16-THD)  
6. 4L-9337 [4] BOLT (3/8-16X1.5-IN)  
7. 5P-2228 [8] BOLT (1/2-13X1-IN)  
8. 7X-0772 [4] WASHER-HARD (10.2X25.5X2.5-MM THK)  
9. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 4S-8264 [5] RIVET-POP  
12. 335-0804 [1] PIN  
13. 335-0805 [1] PLATE-CHART  
 

#SEBP43720109
 

310-7976: GUARD GP-DAMPER

310-7976 GUARD GP-DAMPER
S/N RTX1-UP
FOR USE WITH TRUNNION MOUNTED ENGINES
AN ATTACHMENT
i02726312 SEBP4372
3107976 GUARD GP-DAMPER Parts scheme
  For full view, you need register

Parts for your C4.4 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 1P-7115 [4] GROMMET AS  
2. 8J-8919 [1] COVER  
3. 310-7977 [1] GUARD AS-DAMPER  
  1V-8638 [6] NUT (3/8-16-THD)  
4. 351-2245 [8] BOLT-SPECIAL (1/2-13X2-IN)  
5. 351-9004 [2] BRACKET AS  
    (EACH INCLUDES)
  7W-3032 [1] BRACKET  
6. 351-9005 [2] BRACKET AS  
7. 030-8535 [6] BOLT-LOCKING (3/8-16X0.875-IN)  
8. 0S-1591 [4] BOLT (3/8-16X1.5-IN)  
9. 3F-1417 [4] WASHER (10.3X30.2X3-MM THK)  
10. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 5P-1075 [6] WASHER-HARD (10.2X22.5X3-MM THK)  
12. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 9L-9132 [4] WASHER (10.2X25.5X2.5-MM THK)  
14. 9S-8752 [4] NUT-FULL (3/8-16-THD)  
 

Information:

Specifications
Gear Group (Front)
C4.4 Industrial Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
C4.4 Industrial Engine
Gear Group - Inspect
C4.4 Industrial Engine
Disassembly and Assembly
Gear Group (Front) - Remove and Install
C4.4 Industrial Engine
Idler Gear - Install
C4.4 Industrial Engine
Idler Gear - Remove
C4.4 Industrial Engine
Idler Gear - Remove
C4.4 Industrial Engine
Idler Gear - Remove
C4.4 Industrial Engine
Idler Gear - Install
C4.4 Industrial Engine
Idler Gear - Install
C4.4 Industrial Engine

Caterpillar Parts SIS Catalog C4.4 :

FLYWHEEL GP
7W-0968 FLYWHEEL GP
FLYWHEEL GP
417-3390 FLYWHEEL GP
FLYWHEEL GP
301-8237 FLYWHEEL GP
FLYWHEEL GP
286-0244 FLYWHEEL GP
FASTENER GP-FRONT HOUSING
214-6006 FASTENER GP-FRONT HOUSING
EXTENSION GP-FAN
420-0291 EXTENSION GP-FAN
561-8695 ELBOW-PIPE
DRIVE GP-PUMP
330-3071 DRIVE GP-PUMP
GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
GEAR GP-REAR
175-5204 GEAR GP-REAR
GOVERNOR GP-AIR COMPRESSOR
4N-9680 GOVERNOR GP-AIR COMPRESSOR
GUARD GP-BELT
151-9228 GUARD GP-BELT
GUARD GP-BELT
307-1569 GUARD GP-BELT
GUARD GP-BELT
7W-5780 GUARD GP-BELT
GUARD GP-BELT
7W-5780 GUARD GP-BELT
GUARD GP-DAMPER
284-2976 GUARD GP-DAMPER