ELECTRICAL AND STARTING SYSTEM
SENSOR GPELECTRICAL AND STARTING SYSTEM
SENSOR GP#SEBP43740250
231-1975: SENSOR GP-ENGINE
Parts for your 345C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-0262 | [1] | ADAPTER | |
| 2. | 197-8391 Y | [1] | SENSOR GP-TEMPERATURE (AIR INLET MANIFOLD) | |
| 3. | 197-8392 Y | [1] | SENSOR GP-TEMPERATURE (WATER, COOLANT) | |
| 4. | 230-7149 Y | [1] | SENSOR GP-SPEED (CRANKSHAFT SPEED, TIMING) | |
| 5. | 234-4355 | [1] | ADAPTER-O-RING | |
| 6. | 239-2395 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 7. | 239-2396 Y | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 8. | 239-2397 Y | [1] | SENSOR GP-SPEED (CAMSHAFT SPEED, TIMING) | |
| 9. | 164-9609 | [1] | ELBOW | |
| 10. | 239-5674 Y | [1] | SENSOR GP-PRESSURE (AIR INLET MANIFOLD) | |
| 11. | 6V-5048 | [2] | SEAL-O-RING | |
| 12. | 6V-5049 | [1] | SEAL-O-RING | |
| 13. | 8T-0642 M | [2] | BOLT (M8X1.25X14-MM) | |
| 14. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43740251
231-1975: SENSOR GP-ENGINE
Parts for your 345C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 230-7149 Y | [1] | SENSOR GP-SPEED (TIMING, CRANKSHAFT) | |
| 3. | 239-2395 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC AIR) | |
| 4. | 239-2396 Y | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 5. | 239-2397 Y | [1] | SENSOR GP-SPEED (TIMING, CAMSHAFT) | |
| 6. | 239-3478 CY | [1] | SENSOR GP-PRESSURE (INTAKE AIR PRESSURE) | |
| 7. | 274-7395 CY | [1] | SENSOR GP-TEMPERATURE (AIR INLET MANIFOLD) | |
| 8. | 274-7396 CY | [1] | SENSOR GP-TEMPERATURE (COOLANT, WATER) | |
| 9. | 389-3713 | [1] | ELBOW AS | |
| 214-7568 | [1] | SEAL-O-RING | ||
| 234-4355 | [1] | ADAPTER-O-RING | ||
| 10. | 443-4151 | [1] | BRACKET | |
| 11. | 164-9609 | [1] | ELBOW | |
| 12. | 214-7566 | [1] | SEAL-O-RING | |
| 13. | 2Y-5829 M | [1] | NUT (M10X1.5-THD) | |
| 14. | 353-5112 | [1] | ADAPTER AS | |
| 9X-0262 | [1] | ADAPTER | ||
| 214-7566 | [2] | SEAL-O-RING | ||
| 15. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 16. | 7W-9094 | [1] | SPACER (10.5X20X9-MM THK) | |
| 17. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43740252
243-1555: SENSOR GP-ENGINE
Parts for your 345C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 230-7149 Y | [1] | SENSOR GP-SPEED (TIMING, CRANKSHAFT) | |
| 3. | 234-4355 | [1] | ADAPTER-O-RING | |
| 4. | 239-2395 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC AIR) | |
| 5. | 239-2396 Y | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 6. | 239-2397 Y | [1] | SENSOR GP-SPEED (TIMING, CAMSHAFT) | |
| 7. | 274-7395 Y | [1] | SENSOR GP-TEMPERATURE (INTAKE AIR) | |
| 8. | 274-7396 Y | [1] | SENSOR GP-TEMPERATURE (COOLANT, WATER) | |
| 9. | 378-1459 | [1] | BRACKET | |
| 10. | 117-0067 | [1] | ELBOW | |
| 11. | 214-7566 | [1] | SEAL-O-RING | |
| 12. | 214-7568 | [1] | SEAL-O-RING | |
| 13. | 239-3478 Y | [1] | SENSOR GP-PRESSURE (INTAKE AIR) | |
| 14. | 2Y-5829 M | [1] | NUT (M10X1.5-THD) | |
| 15. | 353-5112 | [1] | ADAPTER AS | |
| 9X-0262 | [1] | ADAPTER | ||
| 214-7566 | [2] | SEAL-O-RING | ||
| 16. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 17. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43740253
354-0042: SENSOR GP-ENGINE
354-0042 SENSOR GP-ENGINE
S/N MHX10121-UP
PART OF 286-9795 ENGINE AR-COMPLETE
Type 1
FOR USE WITH @@@@@354-0048@@@@@
S/N MHX10121-UP
PART OF 286-9795 ENGINE AR-COMPLETE
Type 1
FOR USE WITH @@@@@354-0048@@@@@
Parts for your 345C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 234-4355 | [1] | ADAPTER-O-RING | |
| 2. | 234-5012 Y | [1] | SENSOR GP-TEMPERATURE (COOLANT) | |
| 3. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (INTAKE AIR MANIFOLD) | |
| 4. | 249-0096 Y | [1] | SENSOR GP-PRESSURE (INLET AIR) | |
| 5. | 276-8548 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 6. | 276-9067 Y | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 7. | 300-9805 Y | [1] | SENSOR GP-SPEED (CRANKSHAFT)(ENGINE SPEED) | |
| 8. | 300-9806 Y | [1] | SENSOR GP-SPEED (SECONDARY, TIMING) | |
| 9. | 117-0067 | [1] | ELBOW | |
| 10. | 214-7566 | [1] | SEAL-O-RING | |
| 11. | 214-7568 | [1] | SEAL-O-RING | |
| 12. | 332-0194 | [1] | STRAP-CABLE | |
| 13. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 14. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43740254
354-0042: SENSOR GP-ENGINE
354-0042 SENSOR GP-ENGINE
S/N MHX10121-UP
PART OF 356-2433 ENGINE AR-CORE
Type 2
FOR USE WITH @@@@@354-0048@@@@@
S/N MHX10121-UP
PART OF 356-2433 ENGINE AR-CORE
Type 2
FOR USE WITH @@@@@354-0048@@@@@
Parts for your 345C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 234-4355 | [1] | ADAPTER-O-RING | |
| 2. | 234-5012 Y | [1] | SENSOR GP-TEMPERATURE (COOLANT) | |
| 3. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (INTAKE AIR MANIFOLD) | |
| 4. | 249-0096 Y | [1] | SENSOR GP-PRESSURE (INLET AIR) | |
| 5. | 276-8548 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 6. | 276-9067 Y | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 7. | 384-1836 CY | [1] | SENSOR GP-SPEED (ENGINE SPEED) | |
| 8. | 300-9806 Y | [1] | SENSOR GP-SPEED (SECONDARY, TIMING) | |
| 9. | 117-0067 | [1] | ELBOW | |
| 10. | 214-7566 | [1] | SEAL-O-RING | |
| 11. | 214-7568 | [1] | SEAL-O-RING | |
| 12. | 3S-2093 C | [2] | STRAP-CABLE | |
| 13. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 14. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 15. | 378-1459 C | [1] | BRACKET | |
| 16. | 2Y-5829 CM | [1] | NUT (M10X1.5-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43740255
354-0042: SENSOR GP-ENGINE
354-0042 SENSOR GP-ENGINE
S/N MHX10121-UP
PART OF 356-2433 ENGINE AR-CORE
Type 3
FOR USE WITH @@@@@354-0048@@@@@
S/N MHX10121-UP
PART OF 356-2433 ENGINE AR-CORE
Type 3
FOR USE WITH @@@@@354-0048@@@@@
Parts for your 345C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 389-3713 C | [1] | ELBOW AS | |
| 234-4355 | [1] | ADAPTER-O-RING | ||
| 234-4355 | [1] | ADAPTER-O-RING | ||
| 2. | 234-5012 Y | [1] | SENSOR GP-TEMPERATURE (COOLANT) | |
| 3. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (INTAKE AIR MANIFOLD) | |
| 4. | 249-0096 Y | [1] | SENSOR GP-PRESSURE (INLET AIR) | |
| 5. | 276-8548 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 6. | 274-6719 C | [1] | SENSOR GP-PRESSURE (OIL)(ENGINE OIL) | |
| 7. | 384-1836 Y | [1] | SENSOR GP-SPEED (ENGINE SPEED) | |
| 8. | 300-9806 Y | [1] | SENSOR GP-SPEED (SECONDARY, TIMING) | |
| 9. | 364-8174 C | [1] | ELBOW AS | |
| 117-0067 | [1] | ELBOW | ||
| 214-7566 | [2] | SEAL-O-RING | ||
| 10. | 7W-9094 C | [1] | SPACER (10.5X20X9-MM THK) | |
| 12. | 443-4151 C | [1] | BRACKET | |
| 13. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 14. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 15. | 3S-2093 | [2] | STRAP-CABLE | |
| 16. | 2Y-5829 M | [1] | NUT (M10X1.5-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43740256
178-2345: SENSOR GP-LIQUID LEVEL
178-2345 SENSOR GP-LIQUID LEVEL -WATER IN FUEL
S/N GCL1-UP; ELS1-UP
PART OF 222-8367 SENSOR GP-LIQUID LEVEL
AN ATTACHMENT
S/N GCL1-UP; ELS1-UP
PART OF 222-8367 SENSOR GP-LIQUID LEVEL
AN ATTACHMENT
Parts for your 345C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-2334 | [1] | PROBE AS-LIQUID LEVEL (WATER IN FUEL) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 2. | 178-2335 | [1] | SENSOR AS-LIQUID LEVEL (WATER IN FUEL) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 186-3736 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
#SEBP43740257
222-8367: SENSOR GP-LIQUID LEVEL
222-8367 SENSOR GP-LIQUID LEVEL
S/N GCL1-UP; ELS1-UP
PART OF 268-5318, 325-3563 CONVERSION AR-MACHINE
AN ATTACHMENT
S/N GCL1-UP; ELS1-UP
PART OF 268-5318, 325-3563 CONVERSION AR-MACHINE
AN ATTACHMENT
Parts for your 345C EXCAVATOR:
CATERPILLAR SIS#SEBP43740258
194-6722: SENSOR GP-PRESSURE
194-6722 SENSOR GP-PRESSURE
S/N MHX1-UP
PART OF 239-2395 SENSOR GP-PRESSURE
OPTIONAL FIELD REPLACEMENT ORDER @@@@@249-5293@@@@@, 274-6717 SENSOR-PRESSURE
S/N MHX1-UP
PART OF 239-2395 SENSOR GP-PRESSURE
OPTIONAL FIELD REPLACEMENT ORDER @@@@@249-5293@@@@@, 274-6717 SENSOR-PRESSURE
Parts for your 345C EXCAVATOR:
CATERPILLAR SIS#SEBP43740259
194-6725: SENSOR GP-PRESSURE
Parts for your 345C EXCAVATOR:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Specifications
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Sensors
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Testing and Adjusting
Angle Sensor - Calibrate - AS300/AS450 System
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Excavator Arm Sensors - Calibrate - PSC System
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Troubleshooting
CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0261 FMI 13 Engine Timing Calibration required
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
Engine Temperature Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
MID 105 - CID 0190 - FMI 05
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 105 - CID 0190 - FMI 10
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
MID 105 - CID 1178 - FMI 03
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 105 - CID 1178 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 105 - CID 0600 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 105 - CID 2265 - FMI 03
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 105 - CID 2265 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 105 - CID 2266 - FMI 03
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 105 - CID 2266 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Inlet Air Temperature Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
Caterpillar Parts SIS Catalog 345C :
Truck sale:
Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
70,587
70,255



