ELECTRICAL AND STARTING SYSTEM
SWITCH GPELECTRICAL AND STARTING SYSTEM
SWITCH GP#SEBP43750290
125-1302: SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC -START RELAY
S/N GPB1-UP; PKE1-UP
24-VOLT
PART OF 231-1756 PANEL GP-CIRCUIT BREAKER
S/N GPB1-UP; PKE1-UP
24-VOLT
PART OF 231-1756 PANEL GP-CIRCUIT BREAKER
Parts for your 325D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 3. | 1H-3338 | [2] | LOCKWASHER (EXTERNAL TOOTH) | |
| 4. | 3B-4504 | [2] | LOCKWASHER | |
| 5. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 6. | 9X-1813 E | SLEEVE (16-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP43750291
223-7577: SWITCH GP-MAGNETIC
223-7577 SWITCH GP-MAGNETIC
S/N C7C1-UP
24 VOLT
PART OF 231-3949, 249-9223 STARTING AID GP
ALSO AN ATTACHMENT
S/N C7C1-UP
24 VOLT
PART OF 231-3949, 249-9223 STARTING AID GP
ALSO AN ATTACHMENT
Parts for your 325D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 398-0940 | [1] | SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER RELAY) | |
| 1A. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 1B. | 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 1C. | 3F-9556 | [2] | LOCKWASHER | |
| 1D. | 6V-8186 | [2] | NUT-FULL (5/16-24-THD) | |
| 1E. | 6V-8378 | [2] | NUT (10-32-THD) | |
| 1F. | 8F-1434 | [2] | LOCKWASHER | |
#SEBP43750292
398-0940: SWITCH GP-MAGNETIC
398-0940 SWITCH GP-MAGNETIC
S/N C7C155-UP
PART OF 249-9223 STARTING AID GP
ALSO AN ATTACHMENT
S/N C7C155-UP
PART OF 249-9223 STARTING AID GP
ALSO AN ATTACHMENT
Parts for your 325D EXCAVATOR:
CATERPILLAR SIS#SEBP43750293
258-0883: SWITCH GP-PRESSURE
258-0883 SWITCH GP-PRESSURE
S/N GPB1-UP; PKE1-UP
PART OF 223-3046, 259-3885 LINES GP-FUEL
ALSO AN ATTACHMENT
S/N GPB1-UP; PKE1-UP
PART OF 223-3046, 259-3885 LINES GP-FUEL
ALSO AN ATTACHMENT
Parts for your 325D EXCAVATOR:
CATERPILLAR SIS#SEBP43750294
238-1594: SWITCH GP-PUSH BUTTON
238-1594 SWITCH GP-PUSH BUTTON -REFUELING PUMP, START
S/N GPB1-UP; PKE1-UP
PART OF 238-1570 WIRING GP-REFUELING PUMP
AN ATTACHMENT
S/N GPB1-UP; PKE1-UP
PART OF 238-1570 WIRING GP-REFUELING PUMP
AN ATTACHMENT
Parts for your 325D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-9442 | [1] | SWITCH GP-PUSH BUTTON (REFUELING PUMP, START) | |
| 1S-0812 | [2] | SCREW-TAPPING | ||
| 3K-0835 | [1] | NUT (5/8-24-THD) | ||
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8748 | [1] | ADAPTER-MOUNT | ||
| 9W-0625 | [1] | SWITCH AS-PUSH BUTTON (REFUELING PUMP, START) | ||
| 2. | 238-1595 | [1] | HARNESS AS-SWITCH (REFUELING PUMP, START) | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 3. | 125-7875 BCE | TUBE-HEAT SHRINK (7.44-MM DIA) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP43750295
238-1596: SWITCH GP-PUSH BUTTON
238-1596 SWITCH GP-PUSH BUTTON -REFUELING PUMP, STOP
S/N GPB1-UP; PKE1-UP
PART OF 238-1570 WIRING GP-REFUELING PUMP
AN ATTACHMENT
S/N GPB1-UP; PKE1-UP
PART OF 238-1570 WIRING GP-REFUELING PUMP
AN ATTACHMENT
Parts for your 325D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-4184 | [1] | SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP) | |
| 1S-0812 | [2] | SCREW-TAPPING | ||
| 3E-7389 | [1] | SWITCH-PUSH BUTTON (REFUELING PUMP, STOP) | ||
| 3K-0835 | [1] | NUT (5/8-24-THD) | ||
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8748 | [1] | ADAPTER-MOUNT | ||
| 2. | 238-1597 | [1] | HARNESS AS-SWITCH (REFUELING PUMP, STOP) | |
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 3. | 125-7875 BE | TUBE-HEAT SHRINK (7.44-MM DIA)(6-CM) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP43750296
5C-6108: SWITCH GP-REFUELING
5C-6108 SWITCH GP-REFUELING -FUEL TANK SHUTOFF
S/N GPB1-UP; PKE1-UP
PART OF 229-1785 PUMP GP-REFUELING
AN ATTACHMENT
S/N GPB1-UP; PKE1-UP
PART OF 229-1785 PUMP GP-REFUELING
AN ATTACHMENT
Parts for your 325D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8J-9236 | [1] | SWITCH (LIQUID LEVEL)(FUEL) | |
| 2. | 5C-6074 | [1] | FITTING | |
| 3. | 2S-4078 | [1] | SEAL-O-RING | |
| 4. | 3D-2824 | [1] | SEAL-O-RING | |
| 5. | 8S-1815 | [1] | PLUG | |
| 6. | 8S-1814 | [2] | INSULATOR | |
| 7. | 4B-2049 | [2] | NUT (10-32-THD) | |
| 8. | 8S-1812 | [1] | TERMINAL | |
| 9. | 9B-4499 | [1] | SCREW-MACHINE (8-36X0.375-IN) | |
| 10. | 7N-9194 | [1] | RING-TERMINAL (18-GA TO 22-GA) | |
| 11. | 7X-3159 E | TUBE-HEAT SHRINK (3-CM) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 547-7976 Y | [1] | SWITCH & WIRE GP-FUEL LEVEL | ||
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43750297
106-0107: SWITCH GP-ROTARY
106-0107 SWITCH GP-ROTARY
S/N GPB1-UP; PKE1-UP
PART OF 251-0542, 251-0544 PANEL GP-SWITCH
AN ATTACHMENT
S/N GPB1-UP; PKE1-UP
PART OF 251-0542, 251-0544 PANEL GP-SWITCH
AN ATTACHMENT
Parts for your 325D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| INCLUDES RECEPTACLE AS & WEDGE | ||||
| 2. | 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | |
| 3. | 8T-8737 | [1] | PLUG-SEAL | |
| 4. | 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| -OR- | ||||
| 126-1767 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 5. | 7Y-5458 M | [1] | NUT (M12X1-THD) | |
| 6. | 7Y-5464 | [1] | WASHER (12.2X15.4X0.5-MM THK) | |
| 7. | 106-0210 | [1] | SEAL | |
| M | METRIC PART | |||
#SEBP43750298
319-4420: SWITCH GP-ROTARY
319-4420 SWITCH GP-ROTARY -THROTTLE POSITION
S/N GPB1-UP; PKE1-UP
PART OF 251-0542, 251-0544 PANEL GP-SWITCH
AN ATTACHMENT
S/N GPB1-UP; PKE1-UP
PART OF 251-0542, 251-0544 PANEL GP-SWITCH
AN ATTACHMENT
Parts for your 325D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 243-4508 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | |
| 2. | 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| -OR- | ||||
| 126-1767 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 3. | 8T-8737 | [1] | PLUG-SEAL | |
| 4. | 7Y-5458 M | [1] | NUT (M12X1-THD) | |
| 5. | 7Y-5464 | [1] | WASHER (12.2X15.4X0.5-MM THK) | |
| 6. | 106-0210 | [1] | SEAL | |
| M | METRIC PART | |||
#SEBP43750299
255-2751: SWITCH GP-START
255-2751 SWITCH GP-START -ENGINE, KEY
S/N GPB1-UP; PKE1-UP
PART OF 251-0542, 251-0544 PANEL GP-SWITCH
AN ATTACHMENT
S/N GPB1-UP; PKE1-UP
PART OF 251-0542, 251-0544 PANEL GP-SWITCH
AN ATTACHMENT
Parts for your 325D EXCAVATOR:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
Troubleshooting
CID 0091 FMI 02 Incorrect Throttle Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Fuel Filter Differential Pressure Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Shutdown Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 2766 FMI 02 Intermediate Engine Speed Switch erratic, intermittent, or incorrect
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Caterpillar Parts SIS Catalog 325D :
Truck sale:
57,871
217,672

