AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

238-1570 WIRING GP-REFUELING PUMP S/N GPB1-UP; PKE1-UP PART OF 229-1784 PUMP AR-FUEL TRANSFER Type 1 AN ATTACHMENT 325D


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL
POWER TRAIN AR

EXCAVATOR 325D EXCAVATOR GPB
 325D L & LN Excavator GPB00001-UP (MACHINE) POWERED BY C7 Engine SEBP4375 325D GPB   (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-PLATFORM
251-0430 WIRING GP-PLATFORM
WIRING GP-QUICK COUPLER
267-7643 WIRING GP-QUICK COUPLER
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
 

#SEBP43750340
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N GPB1-UP; PKE1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 1
AN ATTACHMENT
i02180323 SEBP4375
2381570 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 238-1593 [1] WIRE AS  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43750341
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N GPB1-UP; PKE1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 2
AN ATTACHMENT
i03161300 SEBP4375
2381570 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 319-1335 C [1] HARNESS AS-WIRING  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 C [2] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
16. 7K-1181 C [11] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43750342
 

227-6115: DRIVE GP-FINAL

227-6115 DRIVE GP-FINAL -WITH TRAVEL MOTOR
S/N GPB1-801; PKE1-814
PART OF 171-9410 POWER TRAIN AR
i02297547 SEBP4375
2276115 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-6116 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
2. 204-2674 Y [1] MOTOR & MTG GP-TRAVEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP43750343
 

227-6116: DRIVE GP-FINAL

227-6116 DRIVE GP-FINAL -WITHOUT MOTOR
S/N GPB1-801; PKE1-814
PART OF 227-6115 DRIVE GP-FINAL
i02117254 SEBP4375
2276116 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE  
2. 094-0578 B [1] PLATE (8-MM THK)  
3. 094-0579 B [1] PLATE (9-MM THK)  
4. 094-0580 B [1] PLATE (10-MM THK)  
5. 094-1528 [12] WASHER (53X84X1-MM THK)  
6. 168-8452 J [2] BALL BEARING  
7. 169-5585 J [1] HOUSING  
8. 169-5589 [1] GEAR-SUN (24-TEETH)  
9. 169-5590 [1] GEAR-SUN (24-TEETH)  
10. 169-5592 [3] GEAR-PLANETARY (23-TEETH)  
11. 169-5593 [3] GEAR-PLANETARY (23-TEETH)  
12. 169-5601 [3] SHAFT-PLANETARY  
13. 169-5602 [3] SHAFT-PLANETARY  
14. 171-9387 [1] GEAR-RING (64-TEETH)  
15. 191-2569 [3] BEARING AS (CAGED ROLLER)  
16. 191-2570 [6] BEARING AS (CAGED ROLLER)  
17. 191-2571 [1] CARRIER-PLANETARY  
18. 191-2676 [1] GEAR-RING (72-TEETH)  
19. 191-2683 [1] GEAR-SUN (20-TEETH)  
20. 191-2684 [3] GEAR-PLANETARY (21-TEETH)  
21. 191-2685 [3] BEARING AS  
22. 191-2686 [1] CARRIER AS  
23. 191-2689 [3] WASHER (34X70X1-MM THK)  
24. 191-2690 [3] WASHER (42.3X70X1-MM THK)  
25. 199-4503 [1] COVER  
26. 207-1571 J [1] SEAL GP-DUO-CONE  
26A. 214-3570 [2] RING-TORIC  
26B. Z [2] SEAL-RING  
27. 227-6117 J [1] HOUSING-MOTOR  
28. 227-6118 J [1] RETAINER  
29. 227-6119 [1] CARRIER-PLANETARY  
30. 227-6123 J [2] DOWEL  
31. 227-6124 J [2] PLATE-WASHER  
32. 093-1731 [2] RING-RETAINING  
33. 095-0891 [6] PIN-SPRING  
34. 096-0433 [3] RING-RETAINING  
35. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
36. 171-9298 [1] SEAL-O-RING  
37. 179-8733 M [16] BOLT (M20X2.5X170-MM)  
38. 7M-8485 [2] SEAL-O-RING  
39. 7Y-0595 [3] SPACER (58X79.6X6-MM THK)  
40. 8T-0293 JM [4] BOLT (M12X1.75X20-MM)  
41. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
42. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
43. 1U-8846 B SEALANT-GASKET  
   
    AVAILABLE REPAIR KIT(S):
  227-6125 J [1] KIT-HOUSING (FINAL DRIVE)  
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#SEBP43750344
 

267-6796: DRIVE GP-FINAL

267-6796 DRIVE GP-FINAL -WITHOUT MOTOR
S/N GPB802-UP; PKE815-UP
PART OF 267-6877, 333-2982 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@333-2909@@@@@
ALSO AN ATTACHMENT
i03077037 SEBP4375
2676796 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE  
2. 267-6863 BJ [1] SHIM (0.75-MM THK)  
  7Y-0752 BJ [1] SHIM (0.8-MM THK)  
  267-6864 BJ [1] SHIM (0.85-MM THK)  
  267-6865 BJ [1] SHIM (0.9-MM THK)  
  267-6866 BJ [1] SHIM (0.95-MM THK)  
  7Y-0753 BJ [1] SHIM (1-MM THK)  
  267-6867 BJ [1] SHIM (1.2-MM THK)  
  267-6868 BJ [1] SHIM (1.4-MM THK)  
  7Y-0754 BJ [1] SHIM (1.6-MM THK)  
  267-6869 BJ [1] SHIM (1.8-MM THK)  
  267-6870 BJ [1] SHIM (2-MM THK)  
  267-6871 BJ [1] SHIM (2.3-MM THK)  
5. 094-0578 B [1] PLATE (8-MM THK)  
  094-0579 B [1] PLATE (9-MM THK)  
  094-0580 B [1] PLATE (10-MM THK)  
8. 094-1528 [12] WASHER (53X84X1-MM THK)  
9. 114-1540 J [4] PIN-DOWEL  
10. 168-8452 J [2] BALL BEARING  
11. 169-5589 [1] GEAR-SUN (24-TEETH)  
12. 169-5590 [1] GEAR-SUN (24-TEETH)  
13. 169-5592 [3] GEAR-PLANETARY (23-TEETH)  
14. 169-5593 [3] GEAR-PLANETARY (23-TEETH)  
15. 169-5601 [3] SHAFT-PLANETARY  
16. 169-5602 [3] SHAFT-PLANETARY  
17. 171-9387 [1] GEAR-RING (64-TEETH)  
18. 191-2569 [3] BEARING AS (CAGED ROLLER)  
19. 191-2570 [6] BEARING AS (CAGED ROLLER)  
20. 191-2571 [1] CARRIER-PLANETARY  
21. 191-2676 [1] GEAR-RING (72-TEETH)  
22. 191-2683 [1] GEAR-SUN (20-TEETH)  
23. 191-2684 [3] GEAR-PLANETARY (21-TEETH)  
24. 191-2685 [3] BEARING AS  
25. 191-2686 [1] CARRIER AS  
  191-2687 [3] RACE-BEARING  
26. 191-2689 [3] WASHER (34X70X1-MM THK)  
27. 191-2690 [3] WASHER (42.3X70X1-MM THK)  
28. 199-4503 [1] COVER  
29. 207-1571 J [1] SEAL GP-DUO-CONE  
  214-3570 [2] RING-TORIC  
30. 267-6797 J [1] HOUSING-MOTOR  
31. 267-6798 J [1] HOUSING  
32. 267-6799 [1] CARRIER-PLANETARY  
33. 267-6800 J [1] GEAR-COUPLING  
43. 093-1731 [2] RING-RETAINING  
44. 095-0891 [6] PIN-SPRING  
45. 096-0433 [3] RING-RETAINING  
46. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
47. 171-9298 [1] SEAL-O-RING  
48. 179-8733 M [16] BOLT (M20X2.5X170-MM)  
49. 7M-8485 [2] SEAL-O-RING  
50. 7Y-0595 [3] SPACER (58X79.6X6-MM THK)  
51. 7Y-5217 JM [16] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
52. 8T-3282 J [16] WASHER-HARD (22X35X3.5-MM THK)  
53. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
54. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
55. 1U-8846 B SEALANT-GASKET  
   
    AVAILABLE REPAIR KIT(S):
  267-6818 J [1] KIT-FINAL DRIVE BEARING  
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP43750345
 

267-6877: DRIVE GP-FINAL

267-6877 DRIVE GP-FINAL -WITH MOTOR
S/N GPB802-UP; PKE815-UP
PART OF 171-9410 POWER TRAIN AR
i03077012 SEBP4375
2676877 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-2674 Y [1] MOTOR & MTG GP-TRAVEL  
2. 267-6796 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP43750346
 

333-2909: DRIVE GP-FINAL

333-2909 DRIVE GP-FINAL -WITHOUT MOTOR
S/N GPB1-UP; PKE1-UP
FIELD REPLACEMENT FOR @@@@@267-6796@@@@@
i04308621 SEBP4375
3332909 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)  
2. 267-6863 B [1] SHIM (0.75-MM THK)  
  7Y-0752 B [1] SHIM (0.8-MM THK)  
  267-6864 B [1] SHIM (0.85-MM THK)  
  267-6865 B [1] SHIM (0.9-MM THK)  
  267-6866 B [1] SHIM (0.95-MM THK)  
  7Y-0753 B [1] SHIM (1-MM THK)  
  267-6867 B [1] SHIM (1.2-MM THK)  
  267-6868 B [1] SHIM (1.4-MM THK)  
  7Y-0754 B [1] SHIM (1.6-MM THK)  
  267-6869 B [1] SHIM (1.8-MM THK)  
  267-6870 B [1] SHIM (2-MM THK)  
  267-6871 B [1] SHIM (2.3-MM THK)  
3. 191-2690 [3] WASHER (42.3X70X1-MM THK)  
5. 094-0578 B [1] PLATE (8-MM THK)  
6. 094-0579 B [1] PLATE (9-MM THK)  
7. 094-0580 B [1] PLATE (10-MM THK)  
8. 094-1528 [12] WASHER (53X84X1-MM THK)  
9. 114-1540 [4] PIN-DOWEL  
10. 333-2914 [2] BALL BEARING  
11. 169-5589 [1] GEAR-SUN (24-TEETH)  
12. 169-5590 [1] GEAR-SUN (24-TEETH)  
13. 169-5592 [3] GEAR-PLANETARY (23-TEETH)  
14. 169-5593 [3] GEAR-PLANETARY (23-TEETH)  
15. 171-9387 [1] GEAR-RING (64-TEETH)  
16. 169-5601 [3] SHAFT-PLANETARY  
17. 169-5602 [3] SHAFT-PLANETARY  
18. 191-2689 [3] WASHER (34X70X1-MM THK)  
19. 333-2916 [3] BEARING AS  
20. 333-2917 [6] BEARING AS  
21. 191-2571 [1] CARRIER-PLANETARY  
22. 191-2683 [1] GEAR-SUN (20-TEETH)  
23. 191-2684 [3] GEAR-PLANETARY (21-TEETH)  
24. 191-2676 [1] GEAR-RING (72-TEETH)  
25. 296-6248 [3] BEARING AS-ROLLER  
26. 191-2686 [1] CARRIER AS  
27. 199-4503 [1] COVER  
28. 207-1571 [1] SEAL GP-DUO-CONE  
  214-3570 [2] RING-TORIC  
29. 267-6797 [1] HOUSING-MOTOR  
30. 267-6799 [1] CARRIER-PLANETARY  
31. 267-6800 [1] GEAR-COUPLING  
41. 267-6798 [1] HOUSING  
42. 093-1731 [2] RING-RETAINING  
43. 095-0891 [6] PIN-SPRING  
44. 096-0433 [3] RING-RETAINING  
45. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
46. 171-9298 [1] SEAL-O-RING  
47. 179-8733 M [16] BOLT (M20X2.5X170-MM)  
48. 7M-8485 [2] SEAL-O-RING  
49. 7Y-0595 [3] SPACER (58X79.6X6-MM THK)  
50. 7Y-5217 M [16] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
51. 8T-3282 [16] WASHER-HARD (22X35X3.5-MM THK)  
52. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
53. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
54. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP43750347
 

333-2982: DRIVE GP-FINAL

333-2982 DRIVE GP-FINAL -WITH MOTOR, BIODEGRADABLE OIL
S/N GPB1-UP; PKE1-UP
PART OF 353-0672 DRIVE GP-FINAL, 229-1791 HYDRAULIC AR-BIODEGRADABLE OIL
AN ATTACHMENT
i03669660 SEBP4375
3332982 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 215-9956 Y [1] MOTOR & MTG GP-TRAVEL  
2. 267-6796 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP43750348
 

353-0672: DRIVE GP-FINAL

353-0672 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N GPB1-UP; PKE1-UP
PART OF 229-1791 HYDRAULIC AR-BIODEGRADABLE OIL
AN ATTACHMENT
i04188489 SEBP4375
3530672 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 179-2994 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 333-2982 Y [1] DRIVE GP-FINAL (WITH MOTOR, BIODEGRADABLE OIL)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP43750349
 

171-9410: POWER TRAIN AR

171-9410 POWER TRAIN AR
S/N GPB1-UP; PKE1-UP
PART OF 229-1727, 229-1728 GENERAL AR
i03076878 SEBP4375
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  199-4487 Y [1] DRIVE GP-SWING (WITH MOTOR)  
  171-9412 Y [1] FASTENER GP-SWING & FINAL DR  
  227-6115 Y [2] DRIVE GP-FINAL (WITH TRAVEL MOTOR)  
    S/N GPB1-801; PKE1-814
  267-6877 Y [2] DRIVE GP-FINAL (WITH MOTOR)  
    S/N GPB802-UP; PKE815-UP
  179-2994 Y [2] SPROCKET GP (NON-SEGMENTED)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0091 FMI 02 Incorrect Throttle Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Air Inlet Heater Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Electrical Connectors - Inspect
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0190 FMI 08 Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Fuel Filter Differential Pressure Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0091 FMI 08 Throttle Position signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Sensors and Electrical Connectors
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Pressure Sensor Open or Short Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Indicator Lamp Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0324 FMI 06 Warning Lamp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0324 FMI 05 Warning Lamp open/short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1266 FMI 05 Diagnostic Lamp current below normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1266 FMI 06 Diagnostic Lamp current above normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Digital Sensor Supply Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Coolant Level Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Shutdown Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Throttle Position Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Throttle Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Caterpillar Parts SIS Catalog 325D :

WIRING GP-QUICK COUPLER
267-7643 WIRING GP-QUICK COUPLER
WIRING GP-PLATFORM
251-0430 WIRING GP-PLATFORM
WIRING GP-MEDIUM PRESSURE
259-4949 WIRING GP-MEDIUM PRESSURE
WIRING GP-FUEL SYSTEM
259-5053 WIRING GP-FUEL SYSTEM
WIRING GP-FINE SWING
259-4965 WIRING GP-FINE SWING
WIRING GP-FAN
291-7460 WIRING GP-FAN
251-0448 WIRING GP-FAN
WIRING GP-ENGINE
330-6022 WIRING GP-ENGINE
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
DRIVE GP-FINAL
227-6115 DRIVE GP-FINAL
DRIVE GP-FINAL
227-6116 DRIVE GP-FINAL
DRIVE GP-FINAL
267-6796 DRIVE GP-FINAL
DRIVE GP-FINAL
267-6877 DRIVE GP-FINAL
DRIVE GP-FINAL
333-2909 DRIVE GP-FINAL
DRIVE GP-FINAL
333-2982 DRIVE GP-FINAL
DRIVE GP-FINAL
353-0672 DRIVE GP-FINAL

Truck sale:

Caterpillar 325D
 
Caterpillar 325D
- Crawler Excavators
FINNING CANADA
 
57,871 
Caterpillar 325D, Crawler Excavators, Construction
- Crawler Excavators
ZEPPELIN BAUMASCHINEN
Caterpillar M325D, Feller Bunchers, Forestry equipment
213,900 
Caterpillar M325D, Feller Bunchers, Forestry equipment
- Feller Bunchers
FINNING CANADA
Caterpillar M325D, material handlers / demolition, Construction
217,672 
Caterpillar M325D, material handlers / demolition, Construction
- wheel excavator
FINNING CANADA
 
 
Caterpillar 325D, Crawler Excavators, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.