AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

274-1960 ACTUATOR GP-CLAMSHELL -CB2-FAMILY S/N GPB923-UP; PKE961-UP AN ATTACHMENT 325D EXCAVATOR


IMPLEMENTS
ACTUATOR GP
WORK TOOLS
BUCKET GP

EXCAVATOR 325D EXCAVATOR GPB
 325D L & LN Excavator GPB00001-UP (MACHINE) POWERED BY C7 Engine SEBP4375 325D GPB   (2005)

IMPLEMENTS

ACTUATOR GP
ACTUATOR GP-CLAMSHELL
274-1960 ACTUATOR GP-CLAMSHELL
ACTUATOR GP-CLAMSHELL
274-1960 ACTUATOR GP-CLAMSHELL
ACTUATOR GP-CLAMSHELL
274-1960 ACTUATOR GP-CLAMSHELL
ACTUATOR GP-CLAMSHELL
275-4873 ACTUATOR GP-CLAMSHELL
ACTUATOR GP-CLAMSHELL
275-4873 ACTUATOR GP-CLAMSHELL
ACTUATOR GP-CLAMSHELL
275-4873 ACTUATOR GP-CLAMSHELL
 

#SEBP43750960
 

274-1960: ACTUATOR GP-CLAMSHELL

274-1960 ACTUATOR GP-CLAMSHELL -CB2-FAMILY
S/N GPB923-UP; PKE961-UP
AN ATTACHMENT
i03120442 SEBP4375
2741960 ACTUATOR GP-CLAMSHELL Parts scheme
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 166-5495 C [1] CHANNEL  
2. 8U-8011 [2] CAP-PROTECTION  
3. 8X-7933 C [2] SPACER (33X57X14-MM THK)  
4. 144-3053 I [2] HOSE AS  
5. 290-9750 J [1] VALVE GP-SELECTOR (BUCKET, CLAMSHELL)  
  188-0185 [1] VALVE-CHECK  
  188-0186 [1] HANDLE  
6. 290-9755 J [1] VALVE GP-SELECTOR (BUCKET, CLAMSHELL)  
  188-0184 [1] VALVE-RELIEF  
  188-0185 [1] VALVE-CHECK  
  188-0186 [1] HANDLE  
7. 190-6263 [1] BRACKET  
8. 196-4750 [1] TUBE AS  
9. 200-4105 [2] CONNECTOR-SPECIAL  
    (EACH INCLUDES)
  4K-1388 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
10. 231-9164 L [2] FITTING GP-HYDRAULIC (QUICK DISCONNECT, MALE)  
11. 274-4261 [3] SUPPORT AS  
12. 281-6335 [1] BRACKET  
13. 281-7035 [1] BRACKET  
14. 1P-3702 [3] SEAL-RECTANGULAR  
15. 1P-3703 [1] SEAL-RECTANGULAR  
16. 1P-5765 [4] FLANGE-HALF  
17. 2P-1293 [2] LOCKNUT (1-3/16-12-THD)  
18. 7X-2544 M [4] BOLT (M10X1.5X140-MM)  
20. 7Y-4868 [2] CLIP  
21. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4182 M [6] BOLT (M10X1.5X45-MM)  
24. 8T-6868 M [4] BOLT (M12X1.75X80-MM)  
25. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
26. 8T-4196 M [12] BOLT (M10X1.5X35-MM)  
27. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
28. 7X-7900 CM [2] BOLT (M30X3.5X50-MM)  
29. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
30. 193-6606 [1] PLATE  
31. 149-4652 [2] SPACER  
32. 317-6600 C [2] PIN AS  
   
    AVAILABLE REPAIR KIT(S):
  290-9758 J [2] KIT-SEAL (MANUAL VALVE)  
  239-3483 L [1] KIT-REPAIR (QUICK DISCONNECT)  
    (KIT INCLUDES, VALVE SEALS, ELASTIC RINGS, O-RINGS & BACKUP RING)
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J AVAILABLE FOR PART(S) MARKED J
  L   KIT MARKED L AVAILABLE FOR PART(S) MARKED L
  M   METRIC PART
 

#SEBP43750961
 

275-4873: ACTUATOR GP-CLAMSHELL

275-4873 ACTUATOR GP-CLAMSHELL -D-FAMILY
S/N GPB1-UP; PKE1-UP
Type 1
AN ATTACHMENT
i02437385 SEBP4375
2754873 ACTUATOR GP-CLAMSHELL Parts scheme
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-8011 [2] CAP-PROTECTION  
2. 8X-7933 [1] SPACER (33X57X14-MM THK)  
3. 119-2378 [2] SUPPORT AS  
4. 145-4488 [1] TUBE AS  
5. 145-5836 [1] BRACKET  
6. 145-7053 I [2] HOSE AS  
7. 200-5670 [2] CONNECTOR AS  
    (EACH INCLUDES)
  4K-1388 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  [1] CONNECTOR  
8. 207-0352 [1] VALVE GP-SELECTOR (BUCKET/CLAMSHELL)  
9. 207-0353 [1] VALVE GP-SELECTOR (BUCKET/CLAMSHELL)  
10. 231-9164 J [2] FITTING GP-HYDRAULIC (QUICK DISCONNECT, MALE)  
11. 276-3404 [1] CHANNEL  
12. 289-8717 [1] BRACKET  
13. 289-9027 [1] BRACKET  
14. 1P-3703 [3] SEAL-RECTANGULAR  
15. 6V-0400 [4] FLANGE-HALF  
16. 6V-9172 [2] NUT (1-7/16-12-THD)  
17. 7X-2572 M [1] BOLT (M24X3X35-MM)  
18. 7Y-3732 [2] CLIP  
19. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
21. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
22. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
23. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
24. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
25. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
27. 8T-7930 M [4] BOLT (M12X1.75X160-MM)  
28. 9X-2199 M [1] BOLT (M30X3.5X50-MM)  
29. 3V-9744 [2] SPACER  
30. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
   
    AVAILABLE REPAIR KIT(S):
  239-3483 J [1] KIT-REPAIR (QUICK DISCONNECT)  
    (INCLUDES O-RINGS, VALVE SEALS, ELASTIC RINGS & BACKUP RING)
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP43750962
 

275-4873: ACTUATOR GP-CLAMSHELL

275-4873 ACTUATOR GP-CLAMSHELL -D-FAMILY
S/N GPB1-UP; PKE1-UP
Type 2
AN ATTACHMENT
i02710980 SEBP4375
2754873 ACTUATOR GP-CLAMSHELL Parts scheme
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-8011 [2] CAP-PROTECTION  
2. 8X-7933 [1] SPACER (33X57X14-MM THK)  
3. 119-2378 [2] SUPPORT AS  
4. 145-4488 [1] TUBE AS  
5. 145-5836 [1] BRACKET  
6. 145-7053 I [2] HOSE AS  
7. 200-5670 [2] CONNECTOR AS  
    (EACH INCLUDES)
  4K-1388 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  [1] CONNECTOR  
8. 290-9756 CH [1] VALVE GP-SELECTOR (BUCKET/CLAMSHELL)  
  188-0185 [1] VALVE-CHECK  
  188-0186 [1] HANDLE  
9. 290-9757 CH [1] VALVE GP-SELECTOR (BUCKET/CLAMSHELL)  
  188-0184 [1] VALVE-RELIEF  
  188-0185 [1] VALVE-CHECK  
  188-0186 [1] HANDLE  
10. 231-9164 J [2] FITTING GP-HYDRAULIC (QUICK DISCONNECT, MALE)  
11. 276-3404 [1] CHANNEL  
12. 289-8717 [1] BRACKET  
13. 289-9027 [1] BRACKET  
14. 1P-3703 [3] SEAL-RECTANGULAR  
15. 6V-0400 [4] FLANGE-HALF  
16. 6V-9172 [2] NUT (1-7/16-12-THD)  
17. 7X-2572 M [1] BOLT (M24X3X35-MM)  
18. 7Y-3732 [2] CLIP  
19. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
21. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
22. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
23. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
24. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
25. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
27. 8T-7930 M [4] BOLT (M12X1.75X160-MM)  
28. 9X-2199 M [1] BOLT (M30X3.5X50-MM)  
29. 3V-9744 [2] SPACER  
30. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
   
    AVAILABLE REPAIR KIT(S):
  239-3483 J [1] KIT-REPAIR (QUICK DISCONNECT)  
    (INCLUDES O-RINGS, VALVE SEALS, ELASTIC RINGS & BACKUP RING)
  290-9759 H [1] KIT-SEAL (SELECTOR VALVE)  
  C   CHANGE FROM PREVIOUS TYPE
  H   KIT MARKED H SERVICES PART(S) MARKED H
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP43750963
 

275-4873: ACTUATOR GP-CLAMSHELL

275-4873 ACTUATOR GP-CLAMSHELL -D-FAMILY
S/N GPB1-UP; PKE1-UP
Type 3
AN ATTACHMENT
i03151475 SEBP4375
2754873 ACTUATOR GP-CLAMSHELL Parts scheme
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-8011 [2] CAP-PROTECTION  
2. 8X-7933 C [2] SPACER (33X57X14-MM THK)  
3. 119-2378 [2] SUPPORT AS  
4. 145-4488 [1] TUBE AS  
5. 145-5836 [1] BRACKET  
6. 145-7053 I [2] HOSE AS  
7. 200-5670 [2] CONNECTOR AS  
    (EACH INCLUDES)
  4K-1388 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  [1] CONNECTOR  
8. 290-9756 H [1] VALVE GP-SELECTOR (BUCKET/CLAMSHELL)  
  188-0185 [1] VALVE-CHECK  
  188-0186 [1] HANDLE  
9. 290-9757 H [1] VALVE GP-SELECTOR (BUCKET/CLAMSHELL)  
  188-0184 [1] VALVE-RELIEF  
  188-0185 [1] VALVE-CHECK  
  188-0186 [1] HANDLE  
10. 231-9164 J [2] FITTING GP-HYDRAULIC (QUICK DISCONNECT, MALE)  
11. 166-5495 C [1] CHANNEL  
12. 289-8717 [1] BRACKET  
13. 289-9027 [1] BRACKET  
14. 1P-3703 [3] SEAL-RECTANGULAR  
15. 6V-0400 [4] FLANGE-HALF  
16. 6V-9172 [2] NUT (1-7/16-12-THD)  
17. 326-7298 C [1] PIN AS  
18. 7Y-3732 [2] CLIP  
19. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
20. 326-7295 C [1] PIN AS  
21. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
22. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
23. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
24. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
25. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
27. 8T-7930 M [4] BOLT (M12X1.75X160-MM)  
28. 7X-7900 CM [1] BOLT (M30X3.5X50-MM)  
29. 3V-9744 [2] SPACER  
30. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
   
    AVAILABLE REPAIR KIT(S):
  239-3483 J [1] KIT-REPAIR (QUICK DISCONNECT)  
    (INCLUDES O-RINGS, VALVE SEALS, ELASTIC RINGS & BACKUP RING)
  290-9759 H [1] KIT-SEAL (SELECTOR VALVE)  
  C   CHANGE FROM PREVIOUS TYPE
  H   KIT MARKED H SERVICES PART(S) MARKED H
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP43750964
 

250-6418: ADJUSTER GP-BUCKET

250-6418 ADJUSTER GP-BUCKET -CB-FAMILY
S/N GPB1-UP; PKE1-UP
PART OF 257-5463, 257-5464, 257-5465, 257-5466, 257-5467, 257-5468, 257-5469, 257-5470, 257-5471, 257-5472, 257-5473, 257-5474, 257-5475, 270-8857, 282-8751, 340-5710, 340-5711, 346-0831 BUCKET & ADJUSTER GP
AN ATTACHMENT
i02413667 SEBP4375
2506418 ADJUSTER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 087-5974 [1] PIN  
2. 087-5975 B [4] SHIM (0.5-MM THK)  
3. 087-5976 B [6] SHIM (1-MM THK)  
4. 134-8950 [1] PLATE  
5. 250-6417 [1] FLANGE  
6. 8T-4193 M [6] BOLT (M16X2X50-MM)  
7. 9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP43750965
 

250-6430: ADJUSTER GP-BUCKET

250-6430 ADJUSTER GP-BUCKET -DB-FAMILY
S/N GPB1-UP; PKE1-UP
PART OF 270-1282, 270-1283, 270-1284, 270-1285, 270-1286, 270-1292, 270-1295, 270-1303, 270-1304, 270-1307, 270-1309, 270-1310, 270-1312, 270-1313 BUCKET & ADJUSTER GP
AN ATTACHMENT
i02421903 SEBP4375
2506430 ADJUSTER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-6605 B [6] SHIM (1-MM THK)  
2. 4I-6604 B [4] SHIM (0.5-MM THK)  
3. 4I-6626 [1] PIN  
4. 134-8951 [1] PLATE  
5. 7X-2563 M [5] BOLT (M20X2.5X60-MM)  
6. 8T-4123 [5] WASHER (3.62X5.75X0.375-MM THK)  
7. 250-6457 [1] FLANGE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP43750966
 

257-5463: BUCKET & ADJUSTER GP

257-5463 BUCKET & ADJUSTER GP -EXCAVATION, CB-FAMILY
S/N GPB1-UP; PKE1-UP
750-MM (30-IN) WIDE X 0.67-CU M (0.9-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 3
AN ATTACHMENT
i02410856 SEBP4375
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  250-6418 Y [1] ADJUSTER GP-BUCKET (CB-FAMILY)  
  257-5476 Y [1] BUCKET AS-EXCAVATION (CB-FAMILY)  
   
  2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP43750967
 

257-5464: BUCKET & ADJUSTER GP

257-5464 BUCKET & ADJUSTER GP -EXCAVATION, CB-FAMILY
S/N GPB1-UP; PKE1-UP
1250-MM (49-IN) WIDE X 1.3-CU M (1.7-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 4
AN ATTACHMENT
i02411304 SEBP4375
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  250-6418 Y [1] ADJUSTER GP-BUCKET (CB-FAMILY)  
  257-5477 Y [1] BUCKET AS-EXCAVATION (CB-FAMILY)  
   
  2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP43750968
 

257-5465: BUCKET & ADJUSTER GP

257-5465 BUCKET & ADJUSTER GP -EXCAVATION, CB-FAMILY
S/N GPB1-UP; PKE1-UP
1300-MM (51.2-IN) WIDE X 1.35-CU M (1.8-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 5
AN ATTACHMENT
i02413746 SEBP4375
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  250-6418 Y [1] ADJUSTER GP-BUCKET (CB-FAMILY)  
  257-5478 Y [1] BUCKET AS-EXCAVATION (CB-FAMILY)  
   
  2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP43750969
 

257-5466: BUCKET & ADJUSTER GP

257-5466 BUCKET & ADJUSTER GP -EXCAVATION, CB-FAMILY
S/N GPB1-UP; PKE1-UP
1350-MM (53-IN) WIDE X 1.42-CU M (1.9-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 5
AN ATTACHMENT
i02413911 SEBP4375
  For full view, you need register

Parts for your 325D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  250-6418 Y [1] ADJUSTER GP-BUCKET (CB-FAMILY)  
  257-5479 Y [1] BUCKET AS-EXCAVATION (CB-FAMILY)  
   
  2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 325D :

ACTUATOR GP-CLAMSHELL
274-1960 ACTUATOR GP-CLAMSHELL
ACTUATOR GP-CLAMSHELL
274-1960 ACTUATOR GP-CLAMSHELL
STICK GP-HOE
294-1498 STICK GP-HOE
STICK GP-HOE
290-9296 STICK GP-HOE
STICK GP-HOE
290-9290 STICK GP-HOE
STICK GP-HOE
290-9278 STICK GP-HOE
STICK GP-HOE
290-9269 STICK GP-HOE
STICK GP-HOE
235-7619 STICK GP-HOE
ACTUATOR GP-CLAMSHELL
275-4873 ACTUATOR GP-CLAMSHELL
ACTUATOR GP-CLAMSHELL
275-4873 ACTUATOR GP-CLAMSHELL
ACTUATOR GP-CLAMSHELL
275-4873 ACTUATOR GP-CLAMSHELL
ADJUSTER GP-BUCKET
250-6418 ADJUSTER GP-BUCKET
ADJUSTER GP-BUCKET
250-6430 ADJUSTER GP-BUCKET
257-5463 BUCKET & ADJUSTER GP
257-5464 BUCKET & ADJUSTER GP
257-5465 BUCKET & ADJUSTER GP

Truck sale:

Caterpillar 325D
 
Caterpillar 325D
- Crawler Excavators
FINNING CANADA
 
57,871 
Caterpillar 325D, Crawler Excavators, Construction
- Crawler Excavators
ZEPPELIN BAUMASCHINEN
Caterpillar M325D, Feller Bunchers, Forestry equipment
213,900 
Caterpillar M325D, Feller Bunchers, Forestry equipment
- Feller Bunchers
FINNING CANADA
Caterpillar M325D, material handlers / demolition, Construction
217,672 
Caterpillar M325D, material handlers / demolition, Construction
- wheel excavator
FINNING CANADA
 
 
Caterpillar 325D, Crawler Excavators, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.