AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3408E Engine Emissions Retrofit Repower Tier II For 988F Series II And 988F Wheel Loader 2ZR00001-UP (MACHINE) POWER TRAIN Caterpillar SIS



WHEEL LOADER 988F II WHEEL LOADER 2ZR
 3408E Engine Emissions Retrofit Repower Tier II For 988F Series II And 988F Wheel Loader 2ZR00001-UP (MACHINE) SEBP4379 988F II 2ZR   (1995)

Parts group 988F II:

  For full view, you need register
POWER TRAIN
COOLER GP
CORE GP-XMSN OIL COOLER
105-8651 CORE GP-XMSN OIL COOLER
105-8651 CORE GP-XMSN OIL COOLER
S/N 5XD4137-UP
PART OF 133-8712, 275-6087 LINES GP-WATER

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Service Magazine
Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Dimensions for Oscillating Rear Axle Components and Supports{3278, 3282}
Dimensions for Oscillating Rear Axle Components and Supports{3278, 3282}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Service Letter-NACD
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPINDLE IN THE FRONT AXLE FINAL DRIVES OF CERTAIN 988F II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPINDLE IN THE FRONT AXLE FINAL DRIVES OF CERTAIN 988F II WHEEL LOADERS
Service Letter-Australia
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPINDLE IN THE FRONT AXLE FINAL DRIVES OF CERTAIN 988F II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPINDLE IN THE FRONT AXLE FINAL DRIVES OF CERTAIN 988F II WHEEL LOADERS
Service Letter-CFEL
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPINDLE IN THE FRONT AXLE FINAL DRIVES OF CERTAIN 988F II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPINDLE IN THE FRONT AXLE FINAL DRIVES OF CERTAIN 988F II WHEEL LOADERS
Service Letter-CSARL
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPINDLE IN THE FRONT AXLE FINAL DRIVES OF CERTAIN 988F II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPINDLE IN THE FRONT AXLE FINAL DRIVES OF CERTAIN 988F II WHEEL LOADERS
Service Letter-Americas
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPINDLE IN THE FRONT AXLE FINAL DRIVES OF CERTAIN 988F II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPINDLE IN THE FRONT AXLE FINAL DRIVES OF CERTAIN 988F II WHEEL LOADERS
Technical Information Bulletin
The Final Drive Wheel Bearing Retainer Plate 108-0059 On The Machines Listed Above May Need To Be Replaced.
The Final Drive Wheel Bearing Retainer Plate 108-0059 On The Machines Listed Above May Need To Be Replaced.
Specifications
Axle Groups
988F WHEEL LOADER POWER TRAIN
Wheel Bearing Adjustment 8YG1-Up
988F WHEEL LOADER POWER TRAIN
Wheel Bearing Adjustment 2ZR1-Up
988F WHEEL LOADER POWER TRAIN
Final Drives, Brakes And Wheels
988F WHEEL LOADER POWER TRAIN
Final Drives And Wheels
988F WHEEL LOADER POWER TRAIN
Service (Wheel) Brakes
988F WHEEL LOADER BRAKE SYSTEM
Service Letter-China
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPINDLE IN THE FRONT AXLE FINAL DRIVES OF CERTAIN 988F II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPINDLE IN THE FRONT AXLE FINAL DRIVES OF CERTAIN 988F II WHEEL LOADERS
Service Letter-Asia
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPINDLE IN THE FRONT AXLE FINAL DRIVES OF CERTAIN 988F II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPINDLE IN THE FRONT AXLE FINAL DRIVES OF CERTAIN 988F II WHEEL LOADERS
Reuse And Salvage Guidelines
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion {0679, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion {0679, 3268}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Wheel Loader (988-994) Front and Rear Axle Oil{0680, 0768, 3020, 3260, 3278, 3282, 4050, 4070}
Procedure for Filtering Wheel Loader (988-994) Front and Rear Axle Oil{0680, 0768, 3020, 3260, 3278, 3282, 4050, 4070}
Service Letter-APD
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPINDLE IN THE FRONT AXLE FINAL DRIVES OF CERTAIN 988F II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPINDLE IN THE FRONT AXLE FINAL DRIVES OF CERTAIN 988F II WHEEL LOADERS
Disassembly and Assembly
Duo-Cone Conventional Seals - Install
988F and 988F Series II Wheel Loaders Power Train
Axle Shaft - Remove and Install
988F and 988F Series II Wheel Loaders Power Train
Final Drive Spindle and Service Brake - Disassemble
988F and 988F Series II Wheel Loaders Power Train
Final Drive Spindle and Service Brake - Assemble
988F and 988F Series II Wheel Loaders Power Train
Final Drive, Brake and Wheel - Remove
988F and 988F Series II Wheel Loaders Power Train
Final Drive, Brake and Wheel - Install
988F and 988F Series II Wheel Loaders Power Train
Final Drive and Wheel - Disassemble
988F and 988F Series II Wheel Loaders Power Train
Final Drive and Wheel - Assemble
988F and 988F Series II Wheel Loaders Power Train
Differential and Bevel Gear (Front) - Install
988F and 988F Series II Wheel Loaders Power Train
Trunnion Support (Oscillating Axle, Front) - Remove and Install
988F and 988F Series II Wheel Loaders Power Train
Trunnion Support (Oscillating Axle, Rear) - Remove and Install
988F and 988F Series II Wheel Loaders Power Train
Fixed Axle (Front) - Remove
988F and 988F Series II Wheel Loaders Power Train
Fixed Axle (Front) - Install
988F and 988F Series II Wheel Loaders Power Train
Oscillating Axle (Rear) - Remove
988F and 988F Series II Wheel Loaders Power Train
Oscillating Axle (Rear) - Remove
988F and 988F Series II Wheel Loaders Power Train
Fixed Axle (Front) - Install
988F and 988F Series II Wheel Loaders Power Train
Oscillating Axle (Rear) - Install
988F and 988F Series II Wheel Loaders Power Train
Oscillating Axle (Rear) - Install
988F and 988F Series II Wheel Loaders Power Train
Service Magazine
New Seals And Retainers Improve Service Life Of The Front Axle Input Yoke And Rear Axle Input Yoke {3250}
1997/03/03
Understanding And Troubleshooting Axle Oil Temperature Monitoring Feature {7489}
1997/03/31
Corrections To Wheel Bearing Adjustment Procedures {4008,4001,4050,4051,4055}
1997/06/23
New Brake Piston D-ring Seals Improve Service Life Of The Service Brake Group {4251}
1999/03/22
Correction To Power Train Disassembly And Assembly Module, SENR5729-02 {4008}
1999/08/02
A Special Instruction Is Available for the Dimensions of Oscillating Rear Axle Components and Supports on Wheel Loaders and Integrated Toolcarriers {3278}
2000/07/24
A New Spindle Is Available for Wheel Loaders, Wheel Tractors, and Landfill Compactors {4205}
2001/04/16
New Recommendations for Selecting the Oil Viscosity for the Differentials and Final Drives {3258, 4011, 4051, 7581}
2001/01/22
New Tools are Available for Removing and Installing the Bolts of the Retainer Plate for the Bearing of the Final Drive {0727, 4050}
2002/07/15
A New Retainer Plate For The Final Drive Bearing And Thrust Washer Improves The Service Life {4050}
2004/02/16
A New Retainer Plate For The Final Drive Bearing And Thrust Washer Improves The Service Life {4050}
2004/03/22
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Correction to Specifications , "Service Brakes" {4251}
2004/10/25
New Bronze Alloy Planetary Sleeve Bearings Improve Service Life {4050}
2004/12/20
New Extended Life Brake Discs for Severe Applications Are Now Available {4251, 4255}
2005/12/12
New Components in the Final Drive Improve Service Life {4050, 4084}
2006/04/17
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Reuse And Salvage Guidelines
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Reuse And Salvage Guidelines
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Technical Information Bulletin
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Service Letter-NACD
Product Support Program For Removing The Screen In The Autoshift Transmission Control Of Certain 988F, 990, And 992D Loaders
Product Support Program For Removing The Screen In The Autoshift Transmission Control Of Certain 988F, 990, And 992D Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Specifications
Transmission Hydraulic Controls
988F WHEEL LOADER POWER TRAIN
Service Letter-China
Product Support Program For Removing The Screen In The Autoshift Transmission Control Of Certain 988F, 990, And 992D Loaders
Product Support Program For Removing The Screen In The Autoshift Transmission Control Of Certain 988F, 990, And 992D Loaders
Service Letter-Asia
Service Letter-APD
Bench Test Procedures
Bench Test Procedure for a 988F and 988F Series 2 Wheel Loader Transmission{3030, 3073}
Bench Test Procedure for a 988F and 988F Series 2 Wheel Loader Transmission{3030, 3073}
Disassembly and Assembly
Transmission Hydraulic Control Valve - Assemble
988F and 988F Series II Wheel Loaders Power Train
Transmission Hydraulic Control Valve - Remove
988F and 988F Series II Wheel Loaders Power Train
Transmission Hydraulic Control Valve - Install
988F and 988F Series II Wheel Loaders Power Train
Transmission Hydraulic Control Valve - Disassemble
988F and 988F Series II Wheel Loaders Power Train
Service Magazine
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Service Letter-NACD
Product Support Program For Reworking The Differential Thrust Washers And Case Bearings On Certain 988F Wheel Loaders And 834B Compactors
Product Support Program For Reworking The Differential Thrust Washers And Case Bearings On Certain 988F Wheel Loaders And 834B Compactors
Product Support Program For Replacing The Bronze Spherical Differential Washers That May Fail On Certain 988F II Wheel Loaders, 834B Wheel Dozers, 836 Compactors, And Certain Elphinstone Machines
Product Support Program For Replacing The Bronze Spherical Differential Washers That May Fail On Certain 988F II Wheel Loaders, 834B Wheel Dozers, 836 Compactors, And Certain Elphinstone Machines
Service Letter-Australia
Product Support Program For Reworking The Differential Thrust Washers And Case Bearings On Certain 988F Wheel Loaders And 834B Compactors
Product Support Program For Reworking The Differential Thrust Washers And Case Bearings On Certain 988F Wheel Loaders And 834B Compactors
Product Support Program For Replacing The Bronze Spherical Differential Washers That May Fail On Certain 988F II Wheel Loaders, 834B Wheel Dozers, 836 Compactors, And Certain Elphinstone Machines
Product Support Program For Replacing The Bronze Spherical Differential Washers That May Fail On Certain 988F II Wheel Loaders, 834B Wheel Dozers, 836 Compactors, And Certain Elphinstone Machines
Service Letter-CFEL
Product Support Program For Reworking The Differential Thrust Washers And Case Bearings On Certain 988F Wheel Loaders And 834B Compactors
Product Support Program For Reworking The Differential Thrust Washers And Case Bearings On Certain 988F Wheel Loaders And 834B Compactors
Product Support Program For Replacing The Bronze Spherical Differential Washers That May Fail On Certain 988F II Wheel Loaders, 834B Wheel Dozers, 836 Compactors, And Certain Elphinstone Machines
Product Support Program For Replacing The Bronze Spherical Differential Washers That May Fail On Certain 988F II Wheel Loaders, 834B Wheel Dozers, 836 Compactors, And Certain Elphinstone Machines
Service Letter-CSARL
Product Support Program For Reworking The Differential Thrust Washers And Case Bearings On Certain 988F Wheel Loaders And 834B Compactors
Product Support Program For Reworking The Differential Thrust Washers And Case Bearings On Certain 988F Wheel Loaders And 834B Compactors
Product Support Program For Replacing The Bronze Spherical Differential Washers That May Fail On Certain 988F II Wheel Loaders, 834B Wheel Dozers, 836 Compactors, And Certain Elphinstone Machines
Product Support Program For Replacing The Bronze Spherical Differential Washers That May Fail On Certain 988F II Wheel Loaders, 834B Wheel Dozers, 836 Compactors, And Certain Elphinstone Machines
Service Letter-Americas
Product Support Program For Reworking The Differential Thrust Washers And Case Bearings On Certain 988F Wheel Loaders And 834B Compactors
Product Support Program For Reworking The Differential Thrust Washers And Case Bearings On Certain 988F Wheel Loaders And 834B Compactors
Product Support Program For Replacing The Bronze Spherical Differential Washers That May Fail On Certain 988F II Wheel Loaders, 834B Wheel Dozers, 836 Compactors, And Certain Elphinstone Machines
Product Support Program For Replacing The Bronze Spherical Differential Washers That May Fail On Certain 988F II Wheel Loaders, 834B Wheel Dozers, 836 Compactors, And Certain Elphinstone Machines
Specifications
Differential And Bevel Gear (Front And Rear)
988F WHEEL LOADER POWER TRAIN
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Service Letter-China
Product Support Program For Reworking The Differential Thrust Washers And Case Bearings On Certain 988F Wheel Loaders And 834B Compactors
Product Support Program For Reworking The Differential Thrust Washers And Case Bearings On Certain 988F Wheel Loaders And 834B Compactors
Product Support Program For Replacing The Bronze Spherical Differential Washers That May Fail On Certain 988F II Wheel Loaders, 834B Wheel Dozers, 836 Compactors, And Certain Elphinstone Machines
Product Support Program For Replacing The Bronze Spherical Differential Washers That May Fail On Certain 988F II Wheel Loaders, 834B Wheel Dozers, 836 Compactors, And Certain Elphinstone Machines
Service Letter-Asia
Product Support Program For Reworking The Differential Thrust Washers And Case Bearings On Certain 988F Wheel Loaders And 834B Compactors
Product Support Program For Reworking The Differential Thrust Washers And Case Bearings On Certain 988F Wheel Loaders And 834B Compactors
Product Support Program For Replacing The Bronze Spherical Differential Washers That May Fail On Certain 988F II Wheel Loaders, 834B Wheel Dozers, 836 Compactors, And Certain Elphinstone Machines
Product Support Program For Replacing The Bronze Spherical Differential Washers That May Fail On Certain 988F II Wheel Loaders, 834B Wheel Dozers, 836 Compactors, And Certain Elphinstone Machines
Reuse And Salvage Guidelines
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Salvage of Differential Carriers {3258, 3284}
Salvage of Differential Carriers {3258, 3284}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Letter-APD
Product Support Program For Reworking The Differential Thrust Washers And Case Bearings On Certain 988F Wheel Loaders And 834B Compactors
Product Support Program For Reworking The Differential Thrust Washers And Case Bearings On Certain 988F Wheel Loaders And 834B Compactors
Product Support Program For Replacing The Bronze Spherical Differential Washers That May Fail On Certain 988F II Wheel Loaders, 834B Wheel Dozers, 836 Compactors, And Certain Elphinstone Machines
Product Support Program For Replacing The Bronze Spherical Differential Washers That May Fail On Certain 988F II Wheel Loaders, 834B Wheel Dozers, 836 Compactors, And Certain Elphinstone Machines
Disassembly and Assembly
Differential and Bevel Gear (Front) - Remove
988F and 988F Series II Wheel Loaders Power Train
Differential and Bevel Gear (Front) - Install
988F and 988F Series II Wheel Loaders Power Train
Differential and Bevel Gear - Disassemble
988F and 988F Series II Wheel Loaders Power Train
Differential and Bevel Gear (Rear) - Install
988F and 988F Series II Wheel Loaders Power Train
Differential and Bevel Gear - Assemble
988F and 988F Series II Wheel Loaders Power Train
NoSPIN Differential - Disassemble
988F and 988F Series II Wheel Loaders Power Train
NoSPIN Differential - Assemble
988F and 988F Series II Wheel Loaders Power Train
Differential and Bevel Gear (Rear) - Remove
988F and 988F Series II Wheel Loaders Power Train
Service Magazine
Use 125-5723 Socket Wrench Assembly For Removal And Installation Of Stake-Type Differential Pinion Shaft Nut{3254}
1998/01/19
Use 125-5723 Socket Wrench Assembly For Removal And Installation Of Stake-Type Differential Pinion Shaft Nut {3254}
1998/03/30
Corrections to the Parts Manual, SEBP2413-04, "988F Series II Wheel Loader" {3258, 7567}
1999/12/13
New Recommendations for Selecting the Oil Viscosity for the Differentials and Final Drives {3258, 4011, 4051, 7581}
2001/01/22
New Bearings in the Differential Gear Group and Improvements to the Carrier Assembly are Now Used {3258}
2003/05/05
Use <NOBR> 1U-9891</NOBR> Hydraulic Oil Additive to Eliminate Brake Chatter and Reduce Noise in the Limited Slip Differential {3263, 5095}
Use 1U-9891 Hydraulic Oil Additive to Eliminate Brake Chatter and Reduce Noise in the Limited Slip Differential {3263, 5095}
New High Strength Bolts are Now Used for the Spiral Bevel Gears In Order To Improve Service Life in High Load Applications {3256, 3258}
2015/05/04
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Salvage of Differential Carriers {3258, 3284}
Salvage of Differential Carriers {3258, 3284}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face {3283}
Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face {3283}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Special Instruction
Dismounting Tires on Caterpillar Machines with Five Piece Rims{4202}
Dismounting Tires on Caterpillar Machines with Five Piece Rims{4202}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Disassembly and Assembly
Transmission to Transfer Gears - Connect
988F and 988F Series II Wheel Loaders Power Train
Service Magazine
Improved Drive Gears Increase Torque Converter Service Life {3101,3108}
1997/11/10
New Tightening Procedure For 129-0987 Drain Assembly{3001,3002,3030,3101,3159,5056}
1998/03/16
Longer Bolts And Spacers Used On Output Transfer Case &amp; Gear Group {3159}
1999/04/12
Tool Operating Manual
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Specifications
Transmission Oil Filter
988F WHEEL LOADER POWER TRAIN
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Addition of Serial Numbers to An Improved Bypass Switch Is Now Used {1435}
2000/05/01
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02
New Advanced Efficiency Filters Are Now Available {1408, 1435, 3004, 3067, 5068}
2010/01/29
New Advanced Efficiency Filters Are Now Available for the Transmission Assembly and the Torque Converter Assembly Used on Certain Wheel Loaders {1408, 1435, 3004, 3006, 3067, 5068}
2011/07/07
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Specifications
Transfer Gears
988F WHEEL LOADER POWER TRAIN
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Salvage of Transmission Transfer Gear Case and Cover for Articulated Trucks, Compactors, Load Haul Dump, Wheel Loaders, Wheel Tractors, and Motor Graders {3075, 3159}
Salvage of Transmission Transfer Gear Case and Cover for Articulated Trucks, Compactors, Load Haul Dump, Wheel Loaders, Wheel Tractors, and Motor Graders {3075, 3159}
Disassembly and Assembly
Parking Brake - Assemble
988F and 988F Series II Wheel Loaders Power Train
Parking Brake - Disassemble
988F and 988F Series II Wheel Loaders Power Train
Parking Brake - Remove
988F and 988F Series II Wheel Loaders Power Train
Parking Brake - Install
988F and 988F Series II Wheel Loaders Power Train
Transmission and Transfer Gears - Remove
988F and 988F Series II Wheel Loaders Power Train
Transmission and Transfer Gears - Install
988F and 988F Series II Wheel Loaders Power Train
Transmission from Transfer Gears - Separate
988F and 988F Series II Wheel Loaders Power Train
Input Transfer Gears - Disassemble
988F and 988F Series II Wheel Loaders Power Train
Input Transfer Gears - Assemble
988F and 988F Series II Wheel Loaders Power Train
Output Transfer Gears - Disassemble
988F and 988F Series II Wheel Loaders Power Train
Output Transfer Gears - Assemble
988F and 988F Series II Wheel Loaders Power Train
Service Magazine
New Tightening Procedure For 129-0987 Drain Assembly{3001,3002,3030,3101,3159,5056}
1998/03/16
Longer Bolts And Spacers Used On Output Transfer Case &amp; Gear Group {3159}
1999/04/12
New Input Transfer Gears and a New Yoke Are Used in the Transmission {3159, 3159}
2001/04/16
New Yokes and a New Bearing Are Used in the Output Transfer Gears {3159, 3159}
2001/04/02
A New Roller Bearing Cone is Available for Input Transfer Gears {3159}
2004/05/24
Replacement Covers for the Transfer Gear Cases are Available {3159}
2002/11/18
Improvement to the Seal Reduces Leaks in the Transfer Case {3159}
2004/01/26
A New Retainer Improves the Durability of the Transmission {3063, 3075, 3159}
2005/08/08
Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}
2005/12/26
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
Incorrect Installation of 6V-3965 Quick Disconnect Nipple Assembly, 8C-3446 Sampling Valve, And 5P-9617 Straight Thread Adapter
Incorrect Installation of 6V-3965 Quick Disconnect Nipple Assembly, 8C-3446 Sampling Valve, And 5P-9617 Straight Thread Adapter
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Service Magazine
Corrections To Wheel Bearing Adjustment Procedures {4008,4001,4050,4051,4055}
1997/06/23
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Hydraulic Piston Motors{5058}
Hydraulic Piston Motors{5058}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Axle Oil Cooler Pump and Motor (Frame Location) - Remove and Install
988F and 988F Series II Wheel Loaders Power Train
Service Magazine
High Strength Screws Retain Pump And Motor Retraction Plate For Rotating Pump Groups {5431,5058,5070}
1997/03/24
Preload Adjustment Changed For Shaft Bearings And Barrel Face In Piston Motors {5058}
1998/06/01
Specifications
Transmission Neutralizer Pressure Switch<BR> 4E-4456
988F WHEEL LOADER BRAKE SYSTEM
Neutralizer Limit Switch<BR> 9X-4232
988F WHEEL LOADER BRAKE SYSTEM
Service Magazine
New Transmission Neutralizer Switch Has Increased Service Life {3191}
1997/03/31
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Service Magazine
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-NACD
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Service Letter-Australia
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Service Letter-CFEL
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Service Letter-CSARL
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Service Letter-Americas
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Technical Information Bulletin
Incorrect Installation of 6V-3965 Quick Disconnect Nipple Assembly, 8C-3446 Sampling Valve, And 5P-9617 Straight Thread Adapter
Incorrect Installation of 6V-3965 Quick Disconnect Nipple Assembly, 8C-3446 Sampling Valve, And 5P-9617 Straight Thread Adapter
Specifications
Transmission Oil Pump
988F WHEEL LOADER POWER TRAIN
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Service Letter-China
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Service Letter-Asia
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Service Letter-APD
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Disassembly and Assembly
Transmission Oil Pump - Remove
988F and 988F Series II Wheel Loaders Power Train
Transmission Oil Pump - Install
988F and 988F Series II Wheel Loaders Power Train
Transmission Oil Pump - Disassemble
988F and 988F Series II Wheel Loaders Power Train
Transmission Oil Pump - Assemble
988F and 988F Series II Wheel Loaders Power Train
Axle Oil Cooler Pump and Motor (Frame Location) - Remove and Install
988F and 988F Series II Wheel Loaders Power Train
Service Magazine
High Strength Screws Retain Pump And Motor Retraction Plate For Rotating Pump Groups {5431,5058,5070}
1997/03/24
Wear that is Acceptable in Specific Gear Pumps {4007, 5073, 5073, 7516}
2008/02/04
New Hydraulic Pump Pressure Plates are Now Available for Certain Large Wheel Loaders, Wheel Dozers, and Compactors {5073}
New Hydraulic Pump Pressure Plates are Now Available for Certain Large Wheel Loaders, Wheel Dozers, and Compactors {5073}
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Service Magazine
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2009/01/26
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Service Letter-NACD
Product Support Program For Replacing The Yoke Assemblies That May Leak At The Center Plug Or The Center Plug May Fall Out On Certain 834B Wheel Dozers, 988F Wheel Loaders And CEPL R2900 Loaders
Product Support Program For Replacing The Yoke Assemblies That May Leak At The Center Plug Or The Center Plug May Fall Out On Certain 834B Wheel Dozers, 988F Wheel Loaders And CEPL R2900 Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Drive Shafts
988F WHEEL LOADER POWER TRAIN
Input Shaft, Converter to Transmission
988F WHEEL LOADER POWER TRAIN
Service Letter-China
Product Support Program For Replacing The Yoke Assemblies That May Leak At The Center Plug Or The Center Plug May Fall Out On Certain 834B Wheel Dozers, 988F Wheel Loaders And CEPL R2900 Loaders
Product Support Program For Replacing The Yoke Assemblies That May Leak At The Center Plug Or The Center Plug May Fall Out On Certain 834B Wheel Dozers, 988F Wheel Loaders And CEPL R2900 Loaders
Service Letter-Asia
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Service Letter-APD
Product Support Program For Replacing The Yoke Assemblies That May Leak At The Center Plug Or The Center Plug May Fall Out On Certain 834B Wheel Dozers, 988F Wheel Loaders And CEPL R2900 Loaders
Product Support Program For Replacing The Yoke Assemblies That May Leak At The Center Plug Or The Center Plug May Fall Out On Certain 834B Wheel Dozers, 988F Wheel Loaders And CEPL R2900 Loaders
Disassembly and Assembly
Drive Shaft (Center) - Remove and Install
988F and 988F Series II Wheel Loaders Power Train
Drive Shaft (Front) and Drive Shaft Carrier Bearing - Install
988F and 988F Series II Wheel Loaders Power Train
Drive Shaft (Front) and Drive Shaft Carrier Bearing - Remove
988F and 988F Series II Wheel Loaders Power Train
Drive Shaft (Rear) - Remove and Install
988F and 988F Series II Wheel Loaders Power Train
Input Drive Shaft - Remove and Install
988F and 988F Series II Wheel Loaders Power Train
Service Magazine
New Drive Line Bolt Tightening Procedure Used{3253}
1999/04/05
Correction to the Torque Procedure for the Drive Shaft Bolts {3253}
2001/04/02
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Special Instruction
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
128-4775 Lifting Bracket Assembly{0599, 0632, 0727, 1122, 4050}
128-4775 Lifting Bracket Assembly{0599, 0632, 0727, 1122, 4050}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
Procedure for Filtering Wheel Loader (988-994) Front and Rear Axle Oil{0680, 0768, 3020, 3260, 3278, 3282, 4050, 4070}
Procedure for Filtering Wheel Loader (988-994) Front and Rear Axle Oil{0680, 0768, 3020, 3260, 3278, 3282, 4050, 4070}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
New Tools are Available for Removing and Installing the Bolts of the Retainer Plate for the Bearing of the Final Drive {0727, 4050}
2002/07/15
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Service Letter-NACD
Product Support Program For Installing New Centrifugal Valve To Improve Performance On Certain 988fII Wheel Loaders Used In Some Applications
Product Support Program For Installing New Centrifugal Valve To Improve Performance On Certain 988fII Wheel Loaders Used In Some Applications
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Possible Perception of &quot;Lack Of Power&quot; Or &quot;Lack Of Performance&quot; Due To A Change Of The Centrifugal-Valve Setting On The VCTC Converter
Possible Perception of "Lack Of Power" Or "Lack Of Performance" Due To A Change Of The Centrifugal-Valve Setting On The VCTC Converter
Possible Perception Of &quot;Lack Of Power&quot; Or &quot;Lack Of Performance&quot; Due To A Change Of The Centrifugal-Valve Setting On The VCTC Converter
Possible Perception Of "Lack Of Power" Or "Lack Of Performance" Due To A Change Of The Centrifugal-Valve Setting On The VCTC Converter
Torque Converter Stator Clutch May be Removed
Torque Converter Stator Clutch May be Removed
The Carrier-Stator May Need to Be Reworked on Large Wheel Loaders
The Carrier-Stator May Need to Be Reworked on Large Wheel Loaders
Bolts for the Clutch Disc Inside the Torque Converter May Loosen on Large Wheel Loaders, Landfill Compactors, and Wheel Dozers{3101, 3102}
Bolts for the Clutch Disc Inside the Torque Converter May Loosen on Large Wheel Loaders, Landfill Compactors, and Wheel Dozers{3101, 3102}
Specifications
Torque Converter
988F WHEEL LOADER POWER TRAIN
Converter Outlet Relief Valve
988F WHEEL LOADER POWER TRAIN
Centrifugal Valve
988F WHEEL LOADER POWER TRAIN
Service Letter-China
Product Support Program For Installing New Centrifugal Valve To Improve Performance On Certain 988fII Wheel Loaders Used In Some Applications
Product Support Program For Installing New Centrifugal Valve To Improve Performance On Certain 988fII Wheel Loaders Used In Some Applications
Service Letter-Asia
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Cast Aluminum Stator Wheels for Torque Converters {3101, 3129}
Cast Aluminum Stator Wheels for Torque Converters {3101, 3129}
Repair of Pump Drive Gears for Torque Converters {3100, 3101}
Repair of Pump Drive Gears for Torque Converters {3100, 3101}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0760, 0761, 3101, 3129, 3160, 7555}
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0760, 0761, 3101, 3129, 3160, 7555}
Procedure to Repair Worn Torque Converter Clutch Housing Seal Area on 992D, 992C, 988F, and Later 988B Wheel Loaders{3101, 3102}
Procedure to Repair Worn Torque Converter Clutch Housing Seal Area on 992D, 992C, 988F, and Later 988B Wheel Loaders{3101, 3102}
Variable Capacity Torque Converter Impeller Salvage {3101, 3134}
Variable Capacity Torque Converter Impeller Salvage {3101, 3134}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Letter-APD
Product Support Program For Installing New Centrifugal Valve To Improve Performance On Certain 988fII Wheel Loaders Used In Some Applications
Product Support Program For Installing New Centrifugal Valve To Improve Performance On Certain 988fII Wheel Loaders Used In Some Applications
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Torque Converter - Remove
988F and 988F Series II Wheel Loaders Power Train
Torque Converter - Install
988F and 988F Series II Wheel Loaders Power Train
Torque Converter - Disassemble
988F and 988F Series II Wheel Loaders Power Train
Torque Converter - Assemble
988F and 988F Series II Wheel Loaders Power Train
Engine and Torque Converter - Remove
988F Series II Wheel Loader Engine Supplement
Engine and Torque Converter - Install
988F Series II Wheel Loader Engine Supplement
Engine from Torque Converter - Separate
988F Series II Wheel Loader Engine Supplement
Engine to Torque Converter - Connect
988F Series II Wheel Loader Engine Supplement
Service Magazine
Improved Drive Gears Increase Torque Converter Service Life {3101,3108}
1997/11/10
New Tightening Procedure For 129-0987 Drain Assembly{3001,3002,3030,3101,3159,5056}
1998/03/16
Using the Correct Operating Procedures for the Lockup Clutch Improves Service Life {3101, 3140}
2002/01/07
Assembly Tips for Torque Converter Bearings {3101}
2003/06/30
A New Bearing For The Torque Converter Output Shaft Is Available {3101}
2003/08/11
Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}
2005/12/26
New Bolts Are Available for the Clutch Disc Inside the Torque Converter on Large Wheel Loaders, Landfill Compactors, and Wheel Dozers {3101}
2010/07/02
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Special Instruction
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Installation Procedure for the <NOBR>5P-6261</NOBR> Retaining Rings on ELRT Control Valves {3083, 3157}
Installation Procedure for the 5P-6261 Retaining Rings on ELRT Control Valves {3083, 3157}
Technical Information Bulletin
Incorrect Installation of 6V-3965 Quick Disconnect Nipple Assembly, 8C-3446 Sampling Valve, And 5P-9617 Straight Thread Adapter
Incorrect Installation of 6V-3965 Quick Disconnect Nipple Assembly, 8C-3446 Sampling Valve, And 5P-9617 Straight Thread Adapter
Discs May Fail in 980 and 988 Transmissions
Discs May Fail in 980 and 988 Transmissions
The Steering and Transmission Integrated Controls (STIC) May Not Be Operating Correctly{3033}
The Steering and Transmission Integrated Controls (STIC) May Not Be Operating Correctly{3033}
Specifications
Transmission Oil Pump
988F WHEEL LOADER POWER TRAIN
Transmission Oil Filter
988F WHEEL LOADER POWER TRAIN
Transmission Hydraulic Controls
988F WHEEL LOADER POWER TRAIN
Transmission Selector And Pressure Control Valve
988F WHEEL LOADER POWER TRAIN
Clutch Solenoid
988F WHEEL LOADER POWER TRAIN
Transmission
988F WHEEL LOADER POWER TRAIN
Input Shaft, Converter to Transmission
988F WHEEL LOADER POWER TRAIN
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Rayflex Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Rayflex Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0760, 0761, 3101, 3129, 3160, 7555}
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0760, 0761, 3101, 3129, 3160, 7555}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
Testing and Adjusting
Testing And Adjusting
988F WHEEL LOADER POWER SHIFT TRANSMISSION
Bench Test Procedures
Bench Test Procedure for a 988F and 988F Series 2 Wheel Loader Transmission{3030, 3073}
Bench Test Procedure for a 988F and 988F Series 2 Wheel Loader Transmission{3030, 3073}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission and Transfer Gears - Remove
988F and 988F Series II Wheel Loaders Power Train
Transmission and Transfer Gears - Install
988F and 988F Series II Wheel Loaders Power Train
Transmission from Transfer Gears - Separate
988F and 988F Series II Wheel Loaders Power Train
Output Transfer Gears - Disassemble
988F and 988F Series II Wheel Loaders Power Train
Output Transfer Gears - Assemble
988F and 988F Series II Wheel Loaders Power Train
Transmission Planetary - Disassemble
988F and 988F Series II Wheel Loaders Power Train
Transmission Planetary - Assemble
988F and 988F Series II Wheel Loaders Power Train
Service Magazine
New Electronic Transmission Control {3030}
1996/06/10
Transmission Control Group Should Display The Correct Panel Film{1901,3168,7405}
1996/07/29
New Transmission Neutralizer Switch Has Increased Service Life {3191}
1997/03/31
New Transmission Control Group And New Cap Assembly Used{3168}
1997/05/19
New Tightening Procedure For 129-0987 Drain Assembly{3001,3002,3030,3101,3159,5056}
1998/03/16
Transmission Control Group Switches Are Now Serviceable {3065,1400}
1998/08/31
Correction To Service Manual, SENR5704-04, Electronic Transmission Control System {0374,3168}
1998/11/09
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
New Plate Assembly Reduces Friction Disc Wear In Transmission Planetary Group {3160}
1999/03/22
Longer Bolts And Spacers Used On Output Transfer Case &amp; Gear Group {3159}
1999/04/12
New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/08/02
New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/10/25
Clutch Plates Should be Inspected and the Clutch Plates Should be Circumferentially Ground {3190}
2002/05/27
Additional Clutch Discs may be Installed for Improving the Life of Transmission Clutches {3155}
2002/10/28
Correction to Disassembly and Assembly , "Transmission Planetary - Disassemble" {3030, 3160}
2003/03/31
Correction to Disassembly and Assembly , "Transmission Planetary - Assemble" {3030, 3160}
2003/03/31
New Carriers and New Thrust Washers Improve the Durability of the Transmission {3030}
2005/12/05
A New Retainer Improves the Durability of the Transmission {3063, 3075, 3159}
2005/08/08
Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}
2005/12/26
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
A New Spring Is Now Used in Clutch 5 of the Transmission on Certain Landfill Compactors, Soil Compactors, Load Haul Dumps, Underground Articulated Trucks, Wheel Dozers, and Wheel Loaders {3030, 3160}
2012/10/25
Cat&reg; Reman Announces the Addition of Transmission Clutch Plates for Certain Machine Transmissions {3160}
Cat® Reman Announces the Addition of Transmission Clutch Plates for Certain Machine Transmissions {3160}
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
Special Instruction
Installation Procedure for the <NOBR>5P-6261</NOBR> Retaining Rings on ELRT Control Valves {3083, 3157}
Installation Procedure for the 5P-6261 Retaining Rings on ELRT Control Valves {3083, 3157}
Service Magazine
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
Service Letter-NACD
Product Support Program For Installing New Centrifugal Valve To Improve Performance On Certain 988fII Wheel Loaders Used In Some Applications
Product Support Program For Installing New Centrifugal Valve To Improve Performance On Certain 988fII Wheel Loaders Used In Some Applications
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Possible Perception of &quot;Lack Of Power&quot; Or &quot;Lack Of Performance&quot; Due To A Change Of The Centrifugal-Valve Setting On The VCTC Converter
Possible Perception of "Lack Of Power" Or "Lack Of Performance" Due To A Change Of The Centrifugal-Valve Setting On The VCTC Converter
Possible Perception Of &quot;Lack Of Power&quot; Or &quot;Lack Of Performance&quot; Due To A Change Of The Centrifugal-Valve Setting On The VCTC Converter
Possible Perception Of "Lack Of Power" Or "Lack Of Performance" Due To A Change Of The Centrifugal-Valve Setting On The VCTC Converter
Specifications
Centrifugal Valve
988F WHEEL LOADER POWER TRAIN
Service Letter-China
Product Support Program For Installing New Centrifugal Valve To Improve Performance On Certain 988fII Wheel Loaders Used In Some Applications
Product Support Program For Installing New Centrifugal Valve To Improve Performance On Certain 988fII Wheel Loaders Used In Some Applications
Service Letter-Asia
Service Letter-APD
Specifications
Transmission Selector And Pressure Control Valve
988F WHEEL LOADER POWER TRAIN
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
New Transmission Neutralizer Switch Has Increased Service Life {3191}
1997/03/31
Specifications
Converter Outlet Relief Valve
988F WHEEL LOADER POWER TRAIN
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Disassembly and Assembly
Relief Valve (Torque Converter Outlet) - Assemble
988F and 988F Series II Wheel Loaders Power Train
Relief Valve (Torque Converter Outlet) - Remove
988F and 988F Series II Wheel Loaders Power Train
Relief Valve (Torque Converter Outlet) - Install
988F and 988F Series II Wheel Loaders Power Train
Relief Valve (Torque Converter Outlet) - Disassemble
988F and 988F Series II Wheel Loaders Power Train
Specifications
Transmission Selector And Pressure Control Valve
988F WHEEL LOADER POWER TRAIN
Service Magazine
An Improved Retaining Ring Is Now Available for Machines Equipped with ELRT Transmission Control Valves {3083, 3157}
2013/09/16
Specifications
Transmission Selector And Pressure Control Valve
988F WHEEL LOADER POWER TRAIN
Service Magazine
An Improved Retaining Ring Is Now Available for Machines Equipped with ELRT Transmission Control Valves {3083, 3157}
2013/09/16
Specifications
Sequence And Pressure Control Valve
988F WHEEL LOADER POWER TRAIN
Disassembly and Assembly
Sequence and Pressure Control Valve - Remove
988F and 988F Series II Wheel Loaders Power Train
Sequence and Pressure Control Valve - Install
988F and 988F Series II Wheel Loaders Power Train
Sequence and Pressure Control Valve - Disassemble
988F and 988F Series II Wheel Loaders Power Train
Sequence and Pressure Control Valve - Assemble
988F and 988F Series II Wheel Loaders Power Train
Technical Information Bulletin
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Solenoid Valves May Not Operate Correctly{3174}
Solenoid Valves May Not Operate Correctly{3174}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
Service Letter-Asia
Service Letter-APD
Service Magazine
A New Coil Assembly is Now Used {5479}
2011/05/04
Disassembly and Assembly
Sequence and Pressure Control Valve - Assemble
988F and 988F Series II Wheel Loaders Power Train
Service Letter-NACD
Product Support Program For Removing The Screen In The Autoshift Transmission Control Of Certain 988F, 990, And 992D Loaders
Product Support Program For Removing The Screen In The Autoshift Transmission Control Of Certain 988F, 990, And 992D Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Solenoid Valves May Not Operate Correctly{3174}
Solenoid Valves May Not Operate Correctly{3174}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Specifications
Transmission Hydraulic Controls
988F WHEEL LOADER POWER TRAIN
Transmission Selector And Pressure Control Valve
988F WHEEL LOADER POWER TRAIN
Service Letter-China
Product Support Program For Removing The Screen In The Autoshift Transmission Control Of Certain 988F, 990, And 992D Loaders
Product Support Program For Removing The Screen In The Autoshift Transmission Control Of Certain 988F, 990, And 992D Loaders
Service Letter-Asia
Service Letter-APD
Bench Test Procedures
Bench Test Procedure for a 988F and 988F Series 2 Wheel Loader Transmission{3030, 3073}
Bench Test Procedure for a 988F and 988F Series 2 Wheel Loader Transmission{3030, 3073}
Disassembly and Assembly
Transmission Hydraulic Control Valve - Assemble
988F and 988F Series II Wheel Loaders Power Train
Transmission Hydraulic Control Valve - Remove
988F and 988F Series II Wheel Loaders Power Train
Transmission Hydraulic Control Valve - Install
988F and 988F Series II Wheel Loaders Power Train
Transmission Hydraulic Control Valve - Disassemble
988F and 988F Series II Wheel Loaders Power Train
Service Magazine
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Dismounting Tires on Caterpillar Machines with Five Piece Rims{4202}
Dismounting Tires on Caterpillar Machines with Five Piece Rims{4202}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Service Letter-NACD
Product Support Program For Replacing The Yoke Assemblies That May Leak At The Center Plug Or The Center Plug May Fall Out On Certain 834B Wheel Dozers, 988F Wheel Loaders And CEPL R2900 Loaders
Product Support Program For Replacing The Yoke Assemblies That May Leak At The Center Plug Or The Center Plug May Fall Out On Certain 834B Wheel Dozers, 988F Wheel Loaders And CEPL R2900 Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Rim Group
988F WHEEL LOADER POWER TRAIN
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Service Letter-China
Product Support Program For Replacing The Yoke Assemblies That May Leak At The Center Plug Or The Center Plug May Fall Out On Certain 834B Wheel Dozers, 988F Wheel Loaders And CEPL R2900 Loaders
Product Support Program For Replacing The Yoke Assemblies That May Leak At The Center Plug Or The Center Plug May Fall Out On Certain 834B Wheel Dozers, 988F Wheel Loaders And CEPL R2900 Loaders
Service Letter-Asia
Reuse And Salvage Guidelines
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Service Letter-APD
Product Support Program For Replacing The Yoke Assemblies That May Leak At The Center Plug Or The Center Plug May Fall Out On Certain 834B Wheel Dozers, 988F Wheel Loaders And CEPL R2900 Loaders
Product Support Program For Replacing The Yoke Assemblies That May Leak At The Center Plug Or The Center Plug May Fall Out On Certain 834B Wheel Dozers, 988F Wheel Loaders And CEPL R2900 Loaders
Disassembly and Assembly
Tire and Rim - Remove and Install
988F and 988F Series II Wheel Loaders Power Train
Service Magazine
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Technical Information Bulletin
Axle Oil Cooling And Filtration - 145-2300 - For the 988F II High Performance Model
Axle Oil Cooling And Filtration - 145-2300 - For the 988F II High Performance Model
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 105-3025 AND 105-3030 SOLENOID VALVES FROM DEALER PARTS STOCK
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Disassembly and Assembly
Axle Oil Cooler Pump and Motor (Frame Location) - Remove and Install
988F and 988F Series II Wheel Loaders Power Train
Axle Oil Cooler - Remove and Install
988F and 988F Series II Wheel Loaders Power Train
Transmission Oil Cooler - Remove - Removal in Machine
988F Series II Wheel Loader Engine Supplement
Transmission Oil Cooler - Install - Installation in Machine
988F Series II Wheel Loader Engine Supplement
Service Magazine
Brake Oil Cooler Packages Now Available{1365}
1998/06/15
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
128-4775 Lifting Bracket Assembly{0599, 0632, 0727, 1122, 4050}
128-4775 Lifting Bracket Assembly{0599, 0632, 0727, 1122, 4050}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
New Tightening Procedure For 129-0987 Drain Assembly{3001,3002,3030,3101,3159,5056}
1998/03/16

Truck sale:

 
 
CATERPILLAR 988F II 2000
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
QUINN COMPANY
California United States
1999 CAT 988F II
USD $65,000 
1999 CAT 988F II

Mideast Equipment Supply
South Windsor, Connecticut
CAT 988F II
 
CAT 988F II

MIDWEST INDUSTRIAL SALES INC
Gardner, Illinois
2000 CAT 988F II
Call 
2000 CAT 988F II

GESTRUCK, S.L.
CAT 988F II
 
CAT 988F II

MIDWEST INDUSTRIAL SALES INC
Gardner, Illinois
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.