AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

224-9869 VALVE MECHANISM GP S/N 2GR1986-5307 777D TRUCK


BASIC ENGINE
VALVE MECHANISM GP
LUBRICATION SYSTEM
BREATHER GP
FILLER GP-ENGINE OIL
FILTER GP-ENGINE OIL
FUMES DISPOSAL GP

TRUCK 777D TRUCK 2YW
 3508B Engine Emissions Repower Tier I For 777B And 777D Off-Highway Truck 2YW00001-UP (MACHINE) SEBP4383 777D 2YW   (1998)

BASIC ENGINE

VALVE MECHANISM GP
VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP
VALVE MECHANISM GP
195-1928 VALVE MECHANISM GP
VALVE MECHANISM GP
224-9869 VALVE MECHANISM GP
VALVE MECHANISM GP
224-9869 VALVE MECHANISM GP
VALVE MECHANISM GP
370-9889 VALVE MECHANISM GP
 

#SEBP43830130
 

224-9869: VALVE MECHANISM GP

224-9869 VALVE MECHANISM GP
S/N 2GR1986-5307
i01969008 SEBP4383
2249869 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 777D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-9315 [1] SEAL  
2. 197-7004 [1] LIFTER AS-INJECTOR  
3. 230-2619 [1] SCREW-ADJUSTMENT (5/8-18X2.375-IN)  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
6. 100-3880 [2] PUSHROD-VALVE  
7. 200-2003 [2] SCREW-ADJUSTMENT (1/2-20X2-IN)  
8. 3J-9196 [2] NUT-JAM (1/2-20-THD)  
9. 7N-4782 [2] SPRING-LIFTER GUIDE  
10. 9S-1354 [1] NUT (5/8-18-THD)  
11. 100-3879 [1] PUSHROD-INJECTOR  
12. 230-2621 C [2] ROCKER ARM AS  
    (EACH INCLUDES)
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
13. 230-2622 C [1] ROCKER ARM AS  
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
14. 230-2633 C [1] SHAFT AS (ROCKER ARM)  
  155-4094 [1] PIN-SPRING  
15. 230-3152 [1] BRIDGE (EXHAUST)  
16. 9F-7707 [3] RING-RETAINING  
17. 100-3877 [1] RETAINER-SPRING  
18. 5P-7530 [1] SEAL-O-RING  
19. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 230-3153 [1] BRIDGE (INLET)  
21. 230-7875 [2] LIFTER AS-VALVE  
22. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
23. 9X-0352 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
24. 6J-2245 [1] SEAL-O-RING  
25. 132-6469 [1] HARNESS AS-WIRING (VALVE MECHANISM)(VALVE MECHANISM)  
  124-0284 E TUBE-HEAT SHRINK (3.2-MM DIA)(6-CM)  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG ASSEMBLY & WEDGE)
26. 120-7413 Y [1] BASE GP-VALVE COVER  
27. 100-3878 [1] SPRING-INJECTOR  
28. 8D-7942 [2] BOLT-12 POINT HEAD (5/8-11X6.5-IN)  
29. 7E-6508 [1] CAP AS  
30. 0S-1590 [2] BOLT (3/8-16X2-IN)  
31. 154-6389 [3] BUTTON  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP43830131
 

224-9869: VALVE MECHANISM GP

224-9869 VALVE MECHANISM GP
S/N 2GR5308-8284
i02198277 SEBP4383
2249869 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 777D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-9196 [2] NUT-JAM (1/2-20-THD)  
2. 7E-6508 [1] CAP AS  
3. 7N-4782 [2] SPRING-LIFTER GUIDE  
4. 9F-7707 [3] RING-RETAINING  
5. 317-1121 [1] NUT-JAM (5/8-18-THD)  
6. 9X-0352 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
7. 100-3877 [1] RETAINER-SPRING  
8. 100-3878 [1] SPRING-INJECTOR  
9. 100-3879 [1] PUSHROD-INJECTOR  
10. 100-3880 [2] PUSHROD-VALVE  
11. 132-6469 [1] HARNESS AS-WIRING (VALVE MECHANISM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  7E-6513 [1] CONNECTOR AS  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  124-0284 E TUBE-HEAT SHRINK (3.2-MM DIA)(6-CM)  
12. 154-6389 [3] BUTTON  
13. 358-0768 [2] SCREW-ADJUSTING (1/2-20X2.42-IN)  
14. 380-4843 [1] SCREW-ADJUSTING (5/8-18X2.375-IN)  
15. 230-2621 [2] ROCKER ARM AS  
    (EACH INCLUDES)
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
16. 230-2633 [1] SHAFT AS (ROCKER ARM)  
  155-4094 [1] PIN-SPRING  
17. 240-7032 C [1] SEAL  
18. 247-8341 CY [1] BASE GP-VALVE COVER  
19. 416-8319 [2] LIFTER AS-VALVE  
20. 265-7537 [1] BRIDGE (INLET)  
21. 265-7538 [1] BRIDGE (EXHAUST)  
22. 281-6159 [1] ROCKER ARM AS  
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
23. 282-7944 [1] LIFTER AS-INJECTOR  
24. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
25. 334-1626 [2] BOLT (3/8-16X2-IN)  
26. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
27. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 5P-7530 [1] SEAL-O-RING  
30. 6J-2245 [1] SEAL-O-RING  
31. 8D-7942 [2] BOLT-12 POINT HEAD (5/8-11X6.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP43830132
 

370-9889: VALVE MECHANISM GP

370-9889 VALVE MECHANISM GP
S/N 2GR8285-UP
i04548089 SEBP4383
3709889 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 777D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-9196 [2] NUT-JAM (1/2-20-THD)  
2. 7E-6508 [1] CAP AS  
3. 7N-4782 [2] SPRING-LIFTER GUIDE  
4. 9F-7707 [3] RING-RETAINING  
5. 317-1121 [1] NUT-JAM (5/8-18-THD)  
6. 9X-0352 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
7. 100-3877 [1] RETAINER-SPRING  
8. 100-3878 [1] SPRING-INJECTOR  
9. 100-3879 [1] PUSHROD-INJECTOR  
10. 100-3880 [2] PUSHROD-VALVE  
11. 132-6469 Y [1] HARNESS AS-WIRING (VALVE MECHANISM)  
12. 154-6389 [3] BUTTON  
13. 358-0768 [2] SCREW-ADJUSTING (1/2-20X2.42-IN)  
14. 380-4843 [1] SCREW-ADJUSTING (5/8-18X2.375-IN)  
15. 230-2621 [2] ROCKER ARM AS (VALVE)  
    (EACH INCLUDES)
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
16. 230-2633 [1] SHAFT AS (ROCKER ARM)  
  155-4094 [1] PIN-SPRING  
17. 240-7032 [1] SEAL  
18. 247-8341 Y [1] BASE GP-VALVE COVER  
19. 416-8319 [2] LIFTER AS-VALVE  
20. 265-7537 [1] BRIDGE (INLET)  
21. 265-7538 [1] BRIDGE (EXHAUST)  
22. 281-6159 [1] ROCKER ARM AS (INJECTOR)  
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
23. 282-7944 [1] LIFTER AS-INJECTOR  
25. 334-1626 [2] BOLT (3/8-16X2-IN)  
26. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
27. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 5P-7530 [1] SEAL-O-RING  
30. 6J-2245 [1] SEAL-O-RING  
31. 8D-7942 [2] BOLT-12 POINT HEAD (5/8-11X6.5-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP43830133
 

101-0838: BREATHER GP

101-0838 BREATHER GP -CRANKCASE
S/N 2GR1986-8284
i00093306 SEBP4383
1010838 BREATHER GP Parts scheme
  For full view, you need register

Parts for your 777D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-3027 [2] BREATHER AS (CRANKCASE)  
2. 4W-3034 [2] CLAMP-HOSE  
3. 5P-0597 [2] CLAMP-HOSE  
4. 5P-4868 [1] CLAMP-HOSE  
6. 101-4199 [2] COVER AS  
7. 272-0760 [2] SEAL-VALVE COVER (BREATHER)  
8. 217-6692 [1] HOSE-TEE  
9. 033-6031 [2] SEAL-O-RING  
10. 1A-9579 [8] BOLT (5/16-18X1.5-IN)  
11. 9M-1974 [8] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP43830134
 

394-8137: BREATHER GP

394-8137 BREATHER GP -CRANKCASE
S/N 2GR8285-UP
i05096260 SEBP4383
3948137 BREATHER GP Parts scheme
  For full view, you need register

Parts for your 777D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-3027 [2] BREATHER AS (CRANKCASE)  
2. 4W-3034 [2] CLAMP-HOSE  
3. 217-6692 [1] HOSE-TEE  
4. 033-6031 [2] SEAL-O-RING  
5. 5P-0597 [2] CLAMP-HOSE  
 

#SEBP43830135
 

1N-4764: FILLER GP-ENGINE OIL

1N-4764 FILLER GP-ENGINE OIL
S/N 2GR1986-UP
i00092596 SEBP4383
1N4764 FILLER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 777D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4902 [1] ELBOW  
2. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
3. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1588 [3] BOLT (3/8-16X1.25-IN)  
5. 2W-0752 [1] GASKET  
6. 117-0057 [1] BRACKET  
7. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
 

#SEBP43830136
 

2W-0177: FILTER GP-ENGINE OIL

2W-0177 FILTER GP-ENGINE OIL
S/N 2GR1986-2632
i00094430 SEBP4383
2W0177 FILTER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 777D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5936 [1] TUBE  
2. 7G-6713 [2] SPRING-MAIN  
3. 1P-1367 [2] PLUNGER (RELIEF VALVE)  
4. 1A-2029 [14] BOLT (3/8-16X1.125-IN)  
5. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
  9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 1S-7106 [2] COVER  
  9Y-8387 C [2] GASKET  
7. 100-8075 [4] CLAMP AS  
8. 1A-1460 [4] BOLT (1/2-13X2-IN)  
9. 100-3560 [1] SUPPORT AS  
  9G-9923 [1] PIN  
10. 0S-1591 [11] BOLT (3/8-16X1.5-IN)  
  9S-8752 [11] NUT-FULL (3/8-16-THD)  
11. 8N-2001 [2] BASE AS-OIL FILTER  
    (EACH INCLUDES)
  2P-4304 [1] STUD-HOLLOW  
12. 9Y-8388 C [3] GASKET  
13. 9S-8002 C [2] PLUG (7/16-20-THD)  
14. 4W-5937 [1] ELBOW  
15. 111-3820 [2] RING-RETAINING  
16. 111-6119 [2] SHIELD  
17. 2P-4005 [2] FILTER AS-ENGINE OIL  
18. 7F-9090 [4] SCREW-DRIVE (NO 8X3/8-IN)  
19. 9S-9272 [1] CAP AS  
20. 9S-9271 [1] COUPLER-MALE  
21. 121-5732 [1] ADAPTER  
22. 109-2332 [2] SEAL-O-RING  
23. 0S-1594 [4] BOLT (3/8-16X1-IN)  
  9S-8752 [4] NUT-FULL (3/8-16-THD)  
24. 8C-3446 C [1] VALVE-SAMPLING (ENGINE OIL)  
  8C-3445 C [1] CAP-DUST  
25. 6V-5048 C [3] SEAL-O-RING  
26. 0S-1571 [4] BOLT (3/8-16X1.75-IN)  
27. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP43830137
 

2W-0177: FILTER GP-ENGINE OIL

2W-0177 FILTER GP-ENGINE OIL
S/N 2GR2633-8284
i01390443 SEBP4383
2W0177 FILTER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 777D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5936 [1] TUBE  
2. 109-2332 [2] SEAL-O-RING  
3. 7G-6713 [2] SPRING-MAIN  
4. 1P-1367 [2] PLUNGER (RELIEF VALVE)  
5. 1S-7106 [2] COVER  
6. 9Y-8387 [2] GASKET  
7. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
8. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
9. 1A-2029 [14] BOLT (3/8-16X1.125-IN)  
10. 100-3560 [1] SUPPORT AS  
  2H-9445 [1] PIN-SPRING  
11. 165-3929 C [4] BOLT (3/8-16X1.5-IN)  
12. 9S-8752 C [4] NUT-FULL (3/8-16-THD)  
13. 151-9270 C [1] BASE AS-OIL FILTER  
  485-2866 [2] STUD  
14. 9Y-8388 C [2] GASKET  
15. 9S-8002 BC [2] PLUG (7/16-20-THD)  
16. 4W-5937 [1] ELBOW  
17. 121-5732 [1] ADAPTER  
20. 1A-1460 [4] BOLT (1/2-13X2-IN)  
21. 7F-9090 [4] SCREW-DRIVE (NO 8X3/8-IN)  
22. 275-2604 [2] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
23. 0S-1594 [4] BOLT (3/8-16X1-IN)  
24. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
25. 111-6119 [2] SHIELD  
28. 8C-3446 [1] VALVE-SAMPLING (ENGINE OIL)  
29. 8C-3445 [1] CAP-DUST  
30. 6V-5048 C [1] SEAL-O-RING  
31. 100-8075 [2] CLAMP AS  
32. 165-3931 [4] BOLT (3/8-16X1.75-IN)  
33. 111-3820 [2] RING-RETAINING  
34. 6V-5048 BC [2] SEAL-O-RING  
35. 264-0450 [2] CLAMP AS  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP43830138
 

381-6246: FILTER GP-ENGINE OIL

381-6246 FILTER GP-ENGINE OIL
S/N 2GR8285-UP
i05800915 SEBP4383
3816246 FILTER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 777D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-1367 [2] PLUNGER (RELIEF VALVE)  
2. 4W-5936 [1] TUBE  
3. 4W-5937 [1] ELBOW  
4. 7G-6713 [2] SPRING-MAIN  
5. 9Y-8388 [2] GASKET  
6. 100-3560 [1] SUPPORT AS  
  2H-9445 [1] PIN-SPRING  
7. 100-8075 [2] CLAMP AS  
8. 111-3820 [2] RING-RETAINING  
9. 111-6119 [2] SHIELD  
10. 121-5732 [1] ADAPTER  
11. 151-9270 [1] BASE AS-OIL FILTER  
  2P-4304 [2] STUD-HOLLOW  
12. 264-0450 [2] CLAMP AS  
13. 275-2604 [2] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
14. 165-3931 [4] BOLT (3/8-16X1.75-IN)  
15. 165-3929 [4] BOLT (3/8-16X1.5-IN)  
16. 0S-1594 [4] BOLT (3/8-16X1-IN)  
17. 109-2332 [2] SEAL-O-RING  
18. 1A-1460 [4] BOLT (1/2-13X2-IN)  
19. 1A-2029 [14] BOLT (3/8-16X1.125-IN)  
20. 1S-7106 [2] COVER  
21. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
22. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 6V-5048 [1] SEAL-O-RING  
24. 7F-9090 [4] SCREW-DRIVE (NO 8X3/8-IN)  
25. 8C-3445 [1] CAP-DUST  
26. 8C-3446 [1] VALVE-SAMPLING (ENGINE OIL)  
27. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-8752 [4] NUT-FULL (3/8-16-THD)  
29. 9Y-8387 [2] GASKET  
 

#SEBP43830139
 

100-6014: FUMES DISPOSAL GP

100-6014 FUMES DISPOSAL GP
S/N 2GR1986-8284
i00092979 SEBP4383
1006014 FUMES DISPOSAL GP Parts scheme
  For full view, you need register

Parts for your 777D TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-4329 [1] TUBE  
2. 0S-1594 B [1] BOLT (3/8-16X1-IN)  
3. 9X-6458 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
4. 6V-0267 [1] CLIP (TAB)  
5. 6V-0268 [1] CLIP (SLOT)  
8. 3H-5788 B [1] SPACER (12.52X17.14X50.8-MM THK)  
9. 0S-1619 B [1] BOLT (3/8-16X3-IN)  
  B   USE AS REQUIRED
 

Information:

Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Importance of Proper Valve Lash Setting {1102, 1121, 1123}
2012/10/04
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Special Instruction
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Specifications
Fuel Injector Mechanism
3500B Engines for Excavators
Valve Mechanism
3500B Engines for Excavators
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
Systems Operation
Fuel Injector Mechanism
3508B Engine for Caterpillar Built Machines
Valve Mechanism
3500B Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Testing and Adjusting
Finding the Top Center Position for the No. 1 Piston
3508B Engine for Caterpillar Built Machines
Valve Lash and Valve Bridge Adjustment
3500B Engines for Caterpillar Built Machines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3508B Engine for Caterpillar Built Machines
Valve Lash Check
3508B Engine for Caterpillar Built Machines
Disassembly and Assembly
Rocker Shaft and Push Rods - Remove
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Rocker Shaft - Assemble
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Rocker Shaft - Disassemble
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Rocker Shaft and Pushrod - Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Valve Mechanism Cover Base - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Service Magazine
The Spring Seat Washer Is Now A Serviceable Component Of The Rocker Arm Cover Base Assembly {1102}
2000/10/30
Addition to Specifications "Valve Mechanism" {1123}
2005/02/28
New Cover Seals are Available {1107, 1201, 1316, 1317, 1336}
2003/03/24
Maintenance Intervals for Valve Bridge and Valve Lash Adjustment of 3500 and C175 Machine Engines {1102}
2013/05/13
A Pin for the Rocker Shaft Is Now Available for Parts Service {1102}
2003/07/28
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2003/12/22
Improved Lifters are Now Used {1102, 1121, 1123}
2005/01/31
New Sleeve Bearing in the Rocker Arm {1123}
2005/02/21
A New Bolt Is Used on the Valve Mechanism Gp of All 3500 Machine Engines {1102, 1107, 1120, 1121, 1123, 1209}
2009/08/31
A New Valve Lifter Assembly Is Used in 3500B Engines {1209}
2012/12/03
Importance of Proper Valve Lash Setting {1102, 1121, 1123, 1209}
2012/10/03
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08

Caterpillar Parts SIS Catalog 777D :

VALVE MECHANISM GP
195-1928 VALVE MECHANISM GP
VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP
8N-6710 V-BELT SET
TRUNNION GP-ENGINE
7N-1863 TRUNNION GP-ENGINE
TRUNNION GP-ENGINE
382-6483 TRUNNION GP-ENGINE
SPACER GP-BLOCK
445-8603 SPACER GP-BLOCK
SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
332-7911 SEAL GP-CRANKSHAFT
VALVE MECHANISM GP
224-9869 VALVE MECHANISM GP
VALVE MECHANISM GP
370-9889 VALVE MECHANISM GP
BREATHER GP
101-0838 BREATHER GP
BREATHER GP
394-8137 BREATHER GP
FILLER GP-ENGINE OIL
1N-4764 FILLER GP-ENGINE OIL
FILTER GP-ENGINE OIL
2W-0177 FILTER GP-ENGINE OIL
FILTER GP-ENGINE OIL
2W-0177 FILTER GP-ENGINE OIL
FILTER GP-ENGINE OIL
381-6246 FILTER GP-ENGINE OIL

Truck sale:

Caterpillar 777D
 
Caterpillar 777D
- Off Highway Trucks
PETERSON TRACTOR CO
Caterpillar 777D, Off Highway Trucks, Construction
545,000 
Caterpillar 777D, Off Highway Trucks, Construction
- Off Highway Trucks
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar 777D, Off Highway Trucks, Construction
525,000 
Caterpillar 777D, Off Highway Trucks, Construction
- Off Highway Trucks
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar 777D, Off Highway Trucks, Construction
417,150 
Caterpillar 777D, Off Highway Trucks, Construction
- Off Highway Trucks
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar 777 D
 
Caterpillar 777 D
- Off Highway Trucks
MADISA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.