AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

169-1822 DAMPER & PULLEY GP S/N 1JD1-UP PART OF 278-4974 INSTALLATION GP-ENGINE D9N TRACK-TYPE TRACTOR


BASIC ENGINE
DAMPER GP
DRIVE GP-FAN
FLYWHEEL GP
GEAR GP
FLYWHEEL GP
HOUSING GP-FLYWHEEL
HOUSING GP-FRONT

TRACK-TYPE TRACTOR D9N TRACK-TYPE TRACTOR 1JD
 3408E Engine Emissions Repower Tier II For D9N Tractor 1JD00001-UP (MACHINE) SEBP4386 D9N 1JD   (1987)

BASIC ENGINE

DAMPER GP
DAMPER & PULLEY GP
169-1822 DAMPER & PULLEY GP
DAMPER GP
4W-5973 DAMPER GP
 

#SEBP43860020
 

169-1822: DAMPER & PULLEY GP

169-1822 DAMPER & PULLEY GP
S/N 1JD1-UP
PART OF 278-4974 INSTALLATION GP-ENGINE
i01305595 SEBP4386
1691822 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-2109 [1] ADAPTER-DAMPER  
2. 338-9808 [1] DAMPER AS  
3. 7W-2338 [1] SPACER (PLATE)  
4. 113-9122 [6] BOLT (5/8-18X7-IN)  
5. 169-1821 [1] PULLEY-CRANKSHAFT (2-GROOVE, 4-GROOVE)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP43860021
 

4W-5973: DAMPER GP

4W-5973 DAMPER GP
S/N 5XD1-UP
RUBBER
i00379806 SEBP4386
4W5973 DAMPER GP Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-2109 [1] ADAPTER-DAMPER  
2. 6F-7024 C [6] BOLT (5/8-18X5-IN)  
  2S-7593 [6] WASHER-HARD (17X35X5-MM THK)  
3. 338-9808 [1] DAMPER AS  
4. 7W-2338 C [1] SPACER (PLATE)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP43860022
 

165-9055: DRIVE GP-FAN

165-9055 DRIVE GP-FAN
S/N 1JD1-UP
PART OF 278-4974 INSTALLATION GP-ENGINE
i02024229 SEBP4386
1659055 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-9122 C [6] BOLT (5/8-18X7-IN)  
2. 133-3316 [1] BRACKET AS-FAN  
2A. 1S-9209 [1] SHAFT-TIGHTENER  
2B. 8H-9189 [1] DOWEL  
3. 133-9016 [1] PULLEY (5-GROOVE)  
4. 163-1965 C [1] PULLEY-CRANKSHAFT (6-GROOVE)  
5. 169-0147 [1] V-BELT SET (FAN DRIVE)  
    (INCLUDES 4 BELTS)
6. 227-7512 CY [1] CLUTCH GP-FAN  
7. 4P-7428 [2] CLIP (LADDER)  
8. 5P-2228 [1] BOLT (1/2-13X1-IN)  
9. 7X-0326 [2] BOLT (1/2-13X3-IN)  
10. 7X-0328 [1] BOLT (1/2-13X3.5-IN)  
11. 7X-0331 [1] BOLT (1/2-13X4.25-IN)  
12. 8T-4223 [9] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 8T-8919 [4] BOLT (1/2-13X1.75-IN)  
14. 9B-7237 [6] BOLT (3/8-16X1.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP43860023
 

107-3752: FLYWHEEL GP

107-3752 FLYWHEEL GP
S/N 5XD1-473
i00470379 SEBP4386
1073752 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-2922 [1] FLYWHEEL AS  
2. 4N-2514 [1] GEAR (113-TEETH)  
3. 5L-2683 [12] BOLT (5/8-18X5.25-IN)  
  4D-3704 [12] WASHER-HARD (17X30X5-MM THK)  
 

#SEBP43860024
 

2W-8025: FLYWHEEL GP

2W-8025 FLYWHEEL GP
S/N 5XD474-UP
i00360637 SEBP4386
2W8025 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-9192 [1] FLYWHEEL AS  
2. 4N-2514 [1] GEAR (113-TEETH)  
3. 5L-2683 [12] BOLT (5/8-18X5.25-IN)  
  4D-3704 [12] WASHER-HARD (17X30X5-MM THK)  
 

#SEBP43860025
 

168-4592: GEAR GP-FRONT

168-4592 GEAR GP-FRONT
S/N 5XD1-UP
TIMING
i01074409 SEBP4386
1684592 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-7609 [1] GEAR-PUMP IDLER (86-TEETH)  
2. 101-6713 [1] PLATE-RETAINING  
3. 5P-5855 [4] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
4. 112-9217 [1] PLATE-THRUST  
5. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
6. 271-5661 [1] GEAR AS-IDLER (43-TEETH)  
  1B-8705 [1] KEY-WOODRUFF  
  131-7123 [1] BUSHING  
7. 7N-2443 [1] WASHER-THRUST (2.508X3.5X0.188-IN THK)  
8. 117-9712 [1] SHAFT-DRIVE IDLER  
9. 3G-2292 [5] BOLT-LOCKING (3/8-16X0.87-IN)  
10. 0T-0573 [1] BOLT (3/8-16X2.75-IN)  
11. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 6N-1027 [1] PLATE-THRUST  
13. 1B-8705 [1] KEY-WOODRUFF  
14. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
15. 1P-7346 [1] WASHER-HARD (10.2X35X6-MM THK)  
16. [1] GEAR-OIL PUMP DRIVE (44 TEETH)  
17. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
18. 100-8181 [1] SHAFT AS-IDLER  
  4H-1641 [1] PIN-SPRING  
  7S-5005 [2] DOWEL  
19. 192-3834 [1] GEAR AS-IDLER (27 TEETH)  
  100-8180 [1] BUSHING  
 

#SEBP43860026
 

112-3440: GEAR GP-REAR

112-3440 GEAR GP-REAR
S/N 5XD1-UP
i00489416 SEBP4386
1123440 GEAR GP-REAR Parts scheme 1123440 GEAR GP-REAR Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-4589 [1] SEAL-O-RING  
2. 030-8194 [1] CONNECTOR  
3. 8N-7806 I [1] HOSE AS  
4. 032-1267 [1] CONNECTOR (STRAIGHT)  
5. 5F-7404 [1] LOCKNUT-BEARING  
6. 3G-2292 [4] BOLT-LOCKING (3/8-16X0.87-IN)  
7. 0S-1595 [2] BOLT (1/2-13X1.25-IN)  
8. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 8N-0605 [1] COVER-FLYWHEEL HOUSING  
10. 1A-2029 [6] BOLT (3/8-16X1.125-IN)  
11. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 9X-7371 [1] SEAL-O-RING  
13. 2W-7615 [1] GEAR-IDLER (64-TEETH)  
14. 2W-7614 [1] GEAR-CRANKSHAFT (64-TEETH)  
15. 4N-1235 [2] SHAFT-IDLER GEAR  
16. 112-3445 [1] GEAR-HYDRAULIC PUMP DRIVE (64-TEETH)  
17. 4N-7183 [1] RING-RETAINING  
18. 4N-0684 [1] DOWEL  
19. 5P-1370 [1] BEARING AS-ROLLER  
20. 1D-4566 [8] BOLT (1/2-13X3.5-IN)  
21. 1T-0720 [6] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
22. 6V-7423 [2] BEARING AS-ROLLER  
23. 4N-0848 [1] SLEEVE-WEAR  
24. 5P-8429 [1] SEAL-O-RING  
25. 502-4034 [1] SEAL-O-RING  
26. 5K-9065 [2] RING-RETAINING  
27. 5F-7403 [1] LOCKWASHER  
28. 4N-1720 [1] COVER-BALANCE WEIGHT  
29. 112-3444 [1] ADAPTER AS  
  1T-0550 [2] PIN-SPRING  
30. 2W-7611 [1] GEAR-BALANCER (64-TEETH)  
31. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
32. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP43860027
 

153-3050: HOUSING GP-FLYWHEEL

153-3050 HOUSING GP-FLYWHEEL
S/N 5XD1-UP
i00744078 SEBP4386
1533050 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-3605 [1] HOUSING AS  
  1W-3136 [1] BAFFLE  
2. 0S-1619 [4] BOLT (3/8-16X3-IN)  
3. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
4. 161-7293 [1] GASKET-CYLINDER  
5. 9M-4225 [2] BOLT (3/8 NCX4 3/8)  
6. 1A-5964 [2] BOLT (3/8-16X4.5-IN)  
7. 2P-2772 [2] COVER  
8. 4N-0933 [2] GASKET  
9. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
10. 5M-2894 [13] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 8T-6765 [4] PLUG-PIPE (1/4-18-THD)  
12. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 0S-1590 [3] BOLT (3/8-16X2-IN)  
14. 3S-0036 [2] PLUG-CORE  
15. 3D-2871 [2] STUD-TAPERLOCK (3/8-16X1.5-IN)  
16. 8T-6761 [1] PLUG-PIPE (1-11-1/2 NPT THD)  
17. 0L-1352 [1] BOLT (3/8-16X3.25-IN)  
18. 8M-9124 [1] WASHER (10X22.5X8-MM THK)  
19. 2H-6488 [8] BOLT (1/2-13X5-IN)  
20. 5F-0304 [1] PLUG (FLYWHEEL HOUSING)  
21. 2A-1162 [1] GASKET  
22. 1W-3189 [3] SPACER (10X18X20-MM THK)  
23. 0S-1588 [3] BOLT (3/8-16X1.25-IN)  
24. 230-6262 B SEALANT  
  B   USE AS REQUIRED
 

#SEBP43860028
 

127-3514: HOUSING GP-FRONT

127-3514 HOUSING GP-FRONT
S/N 5XD1-4821
i00516838 SEBP4386
1273514 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 166-9145 [1] GASKET-CYLINDER BLOCK  
2. 172-9313 [1] HOUSING-TIMING GEAR  
3. 3K-3256 [1] STUD-TAPERLOCK (3/8-16X1.7-IN)  
4. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
5. 0L-1352 [2] BOLT (3/8-16X3.25-IN)  
6. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 0T-0573 [3] BOLT (3/8-16X2.75-IN)  
8. 4B-8641 [1] STUD (3/8-16X2.24-IN)  
9. 129-6628 YC [2] SENSOR GP-SPEED (ENGINE TIMING)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP43860029
 

127-3514: HOUSING GP-FRONT

127-3514 HOUSING GP-FRONT
S/N 5XD4822-UP
i02564698 SEBP4386
1273514 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your D9N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 166-9145 [1] GASKET-CYLINDER BLOCK  
2. 172-9313 [1] HOUSING-TIMING GEAR  
3. 3K-3256 [1] STUD-TAPERLOCK (3/8-16X1.7-IN)  
4. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
5. 0L-1352 [2] BOLT (3/8-16X3.25-IN)  
6. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 0T-0573 [3] BOLT (3/8-16X2.75-IN)  
8. 4B-8641 [1] STUD (3/8-16X2.24-IN)  
9. 265-9033 YC [2] SENSOR GP-SPEED (ENGINE TIMING)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Vibration Damper
3408E and 3412E Engines for Caterpillar Built Machines
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
Testing and Adjusting
Vibration Damper - Check
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Vibration Damper And Crankshaft Pulley
3408 VEHICULAR ENGINE
Vibration Damper and Pulley - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts{1205}
1977/10/31
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/21
Procedure for Installing the Front Gears and Dampers on Certain Caterpillar Engines {1151, 1162, 1205, 1206}
2008/10/13

Caterpillar Parts SIS Catalog D9N :

CYLINDER HEAD GP
164-2208 CYLINDER HEAD GP
CYLINDER HEAD GP
107-7320 CYLINDER HEAD GP
CYLINDER HEAD AS
143-3614 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0041 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0040 CYLINDER HEAD AS
CYLINDER BLOCK GP
109-9009 CYLINDER BLOCK GP
CYLINDER BLOCK AS
122-2245 CYLINDER BLOCK AS
CYLINDER BLOCK AS
110-3779 CYLINDER BLOCK AS
DAMPER GP
4W-5973 DAMPER GP
DRIVE GP-FAN
165-9055 DRIVE GP-FAN
FLYWHEEL GP
107-3752 FLYWHEEL GP
FLYWHEEL GP
2W-8025 FLYWHEEL GP
GEAR GP-FRONT
168-4592 GEAR GP-FRONT
GEAR GP-REAR
112-3440 GEAR GP-REAR
HOUSING GP-FLYWHEEL
153-3050 HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
127-3514 HOUSING GP-FRONT

Truck sale:

Caterpillar D9N, Construction
149,444 USD 
Caterpillar D9N, Construction
- Dozers
FINNING CANADA
Canada
Caterpillar D9N, Construction
59,900 
Caterpillar D9N, Construction
- Dozers
N C MACHINERY CO.
CATERPILLAR D9N 1990
 
CATERPILLAR D9N 1990
- TRACK TYPE TRACTORS
LOUISIANA CAT
Louisiana United States
CATERPILLAR D9N 1992
 
CATERPILLAR D9N 1992
- TRACK TYPE TRACTORS
TRACTORS INDIA PVT LIMITED [TIPL]
CATERPILLAR D9N 1989
 
CATERPILLAR D9N 1989
- TRACK TYPE TRACTORS
WAGNER EQUIPMENT CO
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.