263-5500 CONVERSION AR-ENGINE -REPOWER S/N 2YD1-UP; 3SK1-UP ADDITIONAL MACHINE MODIFICATIONS WILL BE REQUIRED TO INSTALL THIS CONVERSION ARRANGEMENT FOR USE WITH @@@@@256-7535@@@@@, TIER II REPOWER, D10N FIELD INSTALLATION D10N

263-5500 CONVERSION AR-ENGINE -REPOWER
S/N 2YD1-UP; 3SK1-UP
ADDITIONAL MACHINE MODIFICATIONS WILL BE REQUIRED TO INSTALL THIS CONVERSION ARRANGEMENT
FOR USE WITH @@@@@256-7535@@@@@, TIER II REPOWER, D10N
FIELD INSTALLATION

i02404807 SEBP4387

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
455-1901 Y	[1]	KIT-ENGINE CONVERSION (REPOWER)
		(PROVIDES A BREAKDOWN OF THE SERVICEABLE PARTS REQUIRED FOR THE REPOWER, EXCLUDING THE ENGINE & OPTIONAL GROUPS.)

281-0068 Y	[1]	CONVERSION GP-AIR CONDITIONER (REPOWER)
281-0720 Y	[1]	CONVERSION GP-AIR INLET & EXH
281-0724 Y	[1]	CONVERSION GP-ELECTRICAL
281-0723 Y	[1]	CONVERSION GP-ENCLOSURE
281-0722 Y	[1]	CONVERSION GP-HYDRAULIC SYSTEM
281-0728 Y	[1]	CONVERSION GP-POWER TRAIN
281-0718 Y	[1]	CONVERSION GP-COOLING SYSTEM
256-7535 Y	[1]	ENGINE AR
281-0731 Y	[1]	INSTALLATION GP-ENGINE
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP43870002

256-7535: ENGINE AR

ENGINE AR

256-7535 ENGINE AR -REPOWER
S/N 5JJ3695-UP
PART OF 263-5500 CONVERSION AR-ENGINE
FOR USE WITH REPOWERING A D10N TRACK TYPE TRACTOR UNREGULATED ENGINE WITH A TIER II EMISSIONS ENGINE

i07394859 SEBP4387

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
185-7909 Y	[1]	CAMSHAFT GP
193-1221 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
4W-5390 Y	[1]	COVER GP-CYLINDER BLOCK
4N-6876 Y	[1]	COVER GP-FLYWHEEL HOUSING
195-2906 Y	[1]	COVER GP-FRONT HOUSING
178-4202 Y	[1]	COVER GP-VALVE MECHANISM
4N-0922 Y	[1]	CRANKSHAFT GP
109-9010 Y	[1]	CYLINDER BLOCK GP
172-6507 Y	[1]	CYLINDER HEAD GP
6N-2229 Y	[1]	DAMPER GP
180-0523 Y	[1]	DRIVE GP-ACCESSORY
125-3431 Y	[1]	DRIVE GP-UNIT INJ HYD PUMP
4N-2481 Y	[1]	FASTENER GP-OIL PUMP MOUNTING (ENGINE)
175-7864 Y	[1]	FILLER GP-ENGINE OIL
172-6511 Y	[1]	FILTER GP-ENGINE OIL
107-3752 Y	[1]	FLYWHEEL GP
175-7865 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
127-3516 Y	[1]	GEAR GP-FRONT
193-2185 Y	[1]	GEAR GP-REAR
193-2186 Y	[1]	HOUSING GP-FLYWHEEL
166-5427 Y	[1]	HOUSING GP-FRONT
126-2267 Y	[1]	LIFTING GP-ENGINE
166-5425 Y	[1]	LINES GP-AIR
212-1447 Y	[1]	LINES GP-ENGINE OIL
176-6672 Y	[1]	LINES GP-FUEL FILTER
121-4034 Y	[1]	LINES GP-INJECTOR HYD PUMP
166-5431 Y	[1]	LINES GP-TURBOCHARGER OIL
166-5433 Y	[1]	LINES GP-WATER (TURBOCHARGER)
166-5435 Y	[1]	LINES GP-WATER
166-5436 Y	[1]	LINES GP-WATER
212-4246 Y	[1]	MANIFOLD GP-EXHAUST
214-0624 Y	[1]	MOUNTING GP-ALTERNATOR
119-8582 Y	[1]	PAN GP-OIL
192-8809 Y	[12]	PISTON & ROD GP
Y	[1]	PLATE & FILM GP
209-6749 Y	[1]	PLUG GP-CYLINDER BLOCK
124-4456 Y	[1]	PLUG GP-CYLINDER HEAD
153-9078 Y	[1]	PUMP & MTG GP-UNIT INJ HYD
7C-1772 Y	[1]	PUMP GP-ENGINE OIL
		-OR-
523-5202 Y	[1]	PUMP GP-ENGINE OIL
209-2785 Y	[12]	PUMP GP-FUEL INJECTION
4N-5837 Y	[1]	PUMP GP-WATER
191-6506 Y	[1]	SENSOR GP-SPEED
6N-1378 Y	[1]	SUPPORT GP-ENGINE
100-4417 Y	[1]	SWITCH GP-FLOW
179-7086 Y	[1]	TRUNNION GP-ENGINE
166-5441 Y	[1]	TURBOCHARGER GP
108-1874 Y	[1]	VALVE MECHANISM GP
166-5442 Y	[1]	WIRING GP-ENGINE
109-0401 Y	[6]	WIRING GP-UNIT INJECTOR
230-9776	[1]	ELECTRONICS GP

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP43870003

281-0731: INSTALLATION GP-ENGINE

INSTALLATION GP-ENGINE

281-0731 INSTALLATION GP-ENGINE -REPOWER
S/N 2YD1-UP; 3SK1-UP
PART OF 263-5500 CONVERSION AR-ENGINE

i02406166 SEBP4387

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
198-6578 Y	[1]	BELT TENSIONER GP
168-5063 Y	[1]	DRIVE GP-FAN
177-8016 Y	[1]	LUBRICATION GP-PIVOT SHAFT
179-1253 Y	[1]	PULLEY GP-CRANKSHAFT
4P-5544 Y	[1]	SUPPORT GP-ENGINE
Y		SEPARATE ILLUSTRATION

#SEBP43870004

198-6578: BELT TENSIONER GP

BELT TENSIONER GP

198-6578 BELT TENSIONER GP
S/N 2YD1-UP; 3SK1-UP
PART OF 281-0731 INSTALLATION GP-ENGINE

i01442303 SEBP4387

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2M-2742	[1]	PLATE-RETAINER
2.	2S-6150	[1]	COVER-PULLEY
3.	3B-8485	[1]	ELBOW
4.	6N-1186	[1]	PULLEY (4-GROOVE)
5.	8B-2327	[1]	RING-RETAINING
6.	8R-7699	[1]	HOSE AS
7.	191-4959	[1]	ARM AS
7A.	2S-9006	[1]	SHAFT-PULLEY
7B.	4S-5367	[1]	BUSHING AS (MOUNT)
7C.	3H-0703	[1]	DOWEL
8.	198-3137	[1]	PIN-CLEVIS
9.	198-3138	[1]	PIN-CLEVIS
10.	244-8990	[2]	SPRING AS
11.	0S-0509	[1]	BOLT (3/8-16X0.75-IN)
12.	1S-8687	[1]	SPACER (25.5X33.4X31.75-MM THK)
13.	2S-6151	[1]	GASKET
14.	2S-6160	[1]	WASHER-HARD (10.2X32X5-MM THK)
15.	2S-7593	[2]	WASHER-HARD (17X35X5-MM THK)
16.	2T-3019	[1]	CLIP
17.	3B-4617	[2]	PIN-COTTER
18.	4L-6454	[1]	BOLT (3/8-16X1-IN)
19.	4M-6425	[4]	BOLT (5/16-18X1-IN)
20.	5M-9735	[1]	SEAL-LIP TYPE
21.	5P-9297	[2]	CLIP (LOOP)
22.	6B-1124	[2]	BALL BEARING
23.	7D-1649	[2]	WASHER-HARD (13.5X32X5-MM THK)
24.	8L-5008	[1]	ELBOW-PIPE
25.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)

#SEBP43870005

185-7909: CAMSHAFT GP

CAMSHAFT GP

185-7909 CAMSHAFT GP
S/N 5JJ3695-UP

i01220887 SEBP4387

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4N-0342	[1]	PLATE
2.	0S-0509	[2]	BOLT (3/8-16X0.75-IN)
3.	185-7912	[1]	CAMSHAFT AS
4.	101-3374	[1]	GEAR (86-TEETH)
5.	1B-8705	[1]	KEY-WOODRUFF
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP43870006

4W-5390: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

4W-5390 COVER GP-CYLINDER BLOCK
S/N 5JJ3695-UP

i00379637 SEBP4387

4W5390 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1594 C	[3]	BOLT (3/8-16X1-IN)
	5M-2894 C	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
2.	4N-1683	[1]	COVER
	4N-1684	[1]	GASKET
3.	4N-1682 B	[1]	COVER
	4N-0864 B	[1]	GASKET
4.	0S-1594 B	[6]	BOLT (3/8-16X1-IN)
	5M-2894 B	[6]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#SEBP43870007

4N-6876: COVER GP-FLYWHEEL HOUSING

COVER GP-FLYWHEEL HOUSING

4N-6876 COVER GP-FLYWHEEL HOUSING
S/N 5JJ3695-UP

i00089673 SEBP4387

4N6876 COVER GP-FLYWHEEL HOUSING Parts scheme

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4N-1114	[1]	COVER
	9Y-6089	[1]	GASKET
2.	0S-1566	[3]	BOLT (5/8-11X1.5-IN)
	5P-8247	[3]	WASHER-HARD (17X32X3.5-MM THK)

#SEBP43870008

195-2906: COVER GP-FRONT HOUSING

COVER GP-FRONT HOUSING

195-2906 COVER GP-FRONT HOUSING
S/N 5JJ3695-UP

i01440059 SEBP4387

1952906 COVER GP-FRONT HOUSING Parts scheme

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4N-0205	[2]	SPACER (0.42X0.75X0.6-IN THK)
2.	6N-2508	[1]	GASKET
3.	6N-2509	[1]	COVER
4.	127-8953	[1]	PLATE-FAN SUPPORT
5.	133-3868	[1]	BRACKET AS
6.	135-9880	[1]	COVER
7.	0S-1588	[4]	BOLT (3/8-16X1.25-IN)
8.	0S-1590	[2]	BOLT (3/8-16X2-IN)
9.	0S-1591	[4]	BOLT (3/8-16X1.5-IN)
10.	0S-1594	[3]	BOLT (3/8-16X1-IN)
11.	0T-0055	[3]	BOLT (3/8-16X4.25-IN)
12.	133-3867	[1]	BRACKET AS
13.	2M-2488	[1]	STUD-TAPERLOCK (3/8-16X3.59-IN)
14.	4F-0411	[3]	BOLT (3/8-16X6.5-IN)
15.	5B-9603	[1]	BOLT (3/8-16X5-IN)
16.	5M-2894	[6]	WASHER-HARD (10.2X18.5X2.5-MM THK)
17.	6B-1557	[1]	BOLT (3/8-16X7.5-IN)
18.	6B-7254	[1]	STUD-TAPERLOCK
19.	6V-4589	[1]	SEAL-O-RING
20.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
21.	9S-8752	[4]	NUT-FULL (3/8-16-THD)
22.	9X-6458	[10]	WASHER-HARD (10.2X22.5X3-MM THK)
23.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED

#SEBP43870009

178-4202: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

178-4202 COVER GP-VALVE MECHANISM
S/N 5JJ3695-UP

i01211910 SEBP4387

1784202 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2N-8109	[2]	CLAMP
2.	4N-4668	[2]	BREATHER AS (CRANKCASE)
3.	3E-4352	[4]	WASHER-HARD (8.8X20.5X2.5-MM THK)
4.	106-9488	[6]	BASE-VALVE MECHANISM COVER
5.	230-0940	[12]	SEAL-VALVE COVER
6.	114-8684	[1]	COVER-VALVE MECHANISM
7.	119-9015	[3]	COVER AS-VALVE
			(EACH INCLUDES)
7A.	272-2583	[1]	SEAL-O-RING
7B.	7C-6514	[1]	ADAPTER
8.	191-7782	[2]	COVER-VALVE MECHANISM
9.	1B-2790	[52]	BOLT (5/16-18X1.375-IN)
10.	1A-9579	[14]	BOLT (5/16-18X1.5-IN)(MARKED X)
11.	6V-3831	[2]	SEAL-O-RING
12.	9M-1974	[62]	WASHER-HARD (8.8X16X2-MM THK)

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}

Tier II Level Emssions Engine Repower for a D10N Track-Type Tractor {1000}
Tier II Level Emssions Engine Repower for a D10N Track-Type Tractor {1000}

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Tier I Level Emissions Engine Repower for the D10N Track-Type Tractor {1000, 7000}
Tier I Level Emissions Engine Repower for the D10N Track-Type Tractor {1000, 7000}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Caterpillar Track Type Tractor (D9 - D11) Technician Checklist Engine & Torque Converter (TC) Removal and Installation{0372, 0374, 1000, 1000, 1003, 1003, 3101, 3101}
Caterpillar Track Type Tractor (D9 - D11) Technician Checklist
Engine & Torque Converter (TC) Removal and Installation{0372, 0374, 1000, 1000, 1003, 1003, 3101, 3101}

Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SYSTEMS ON CERTAIN TRACK-TYPE TRACTORS AND TRACK-TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SYSTEMS ON CERTAIN TRACK-TYPE TRACTORS AND TRACK-TYPE LOADERS

Service Letter-Australia

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Service Letter-CFEL

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Service Letter-CSARL

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Service Letter-Americas

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Service Letter-Brazil

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Introduction
3412 ENGINE FOR CATERPILLAR BUILT MACHINES

Engine Design
3412 ENGINE FOR CATERPILLAR BUILT MACHINES

Fuel System Identification
3412 ENGINE FOR CATERPILLAR BUILT MACHINES

Engine Design
3408E and 3412E Engines for Caterpillar Built Machines

Tool Operating Manual

Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Service Letter-China

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Service Letter-Asia

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Systems Operation

Systems Operation
3412 ENGINE FOR CATERPILLAR BUILT MACHINES

General Information
3408E and 3412E Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

REMAN ENGINE PRODUCT LINE ADDITION: REMANUFACTURED 3408 & 3412 ENGINES FOR OFF-HIGHWAY TRUCKS
REMAN ENGINE PRODUCT LINE ADDITION: REMANUFACTURED 3408 & 3412 ENGINES FOR OFF-HIGHWAY TRUCKS

Cat Reman Announces Additional 3400 Engine Options for Cat® Machine Applications
Cat Reman Announces Additional 3400 Engine Options for Cat® Machine Applications

CAT REMAN ANNOUNCES ADDITIONAL 3412 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL 3412 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS

Service Letter-APD

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Testing and Adjusting

Testing And Adjusting
3412 ENGINE FOR CATERPILLAR BUILT MACHINES

Technical Analysis

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Oval Track) {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Oval Track) {0372, 1000, 7000, 753S, 7565}

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors {0372, 1000, 7000, 753S, 7565}

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Hydrostatic) {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Hydrostatic) {0372, 1000, 7000, 753S, 7565}

Disassembly and Assembly

Important Information
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

Analyzing A Major Engine Failure{1000}
1982/07/19

Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07

Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26

Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Responsibilities for Emission Certified Engines {1000}
2005/10/03

Replacement Engines are Available for Legacy Machines {1000}
2010/06/23

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2009/11/18

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/28

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

New Special Instruction to Interpret Scheduled Oil Sampling (SOS) is Now Available for All C27 and C32 Machine Engines {1000, 7571}
New Special Instruction to Interpret Scheduled Oil Sampling (SOS) is Now Available for All C27 and C32 Machine Engines {1000, 7571}

Caterpillar Parts SIS Catalog D10N :

256-7535 ENGINE AR

281-0731 INSTALLATION GP-ENGINE

198-6578 BELT TENSIONER GP

185-7909 CAMSHAFT GP

4W-5390 COVER GP-CYLINDER BLOCK

4N-6876 COVER GP-FLYWHEEL HOUSING

195-2906 COVER GP-FRONT HOUSING

178-4202 COVER GP-VALVE MECHANISM

Truck sale:

Caterpillar D10N
- Crawler dozers
TRACTOR & EQUIPMENT CO.

150.000

Caterpillar D10N, Bulldozer, Bau-Und Bergbauausrüstung
- Crawler dozers
TRACTOR & EQUIPMENT CO.

Caterpillar D10N, Construction
- Crawler dozers

75,000

Caterpillar D10N, Construction
- Dozers
CATERPILLAR FINANCIAL SERVICES CORPORATION

Caterpillar D10N, Construction
- Dozers
WHEELER MACHINERY CO.