172-6507 CYLINDER HEAD GP S/N 5JJ3695-UP D10N TRACK-TYPE TRACTOR

BASIC ENGINE

CYLINDER HEAD GP

0. 172-6507 CYLINDER H

DAMPER GP

1. 6N-2229 DAMPER GP

DRIVE GP-ACCESSORY

2. 180-0523 DRIVE GP-A
3. 193-8414 DRIVE GP-A

DRIVE GP-FAN

4. 168-5063 DRIVE GP-F

FLYWHEEL GP

5. 107-3752 FLYWHEEL G

GEAR GP

6. 127-3516 GEAR GP-FR

FLYWHEEL GP

7. 193-2185 GEAR GP-RE

HOUSING GP-FLYWHEEL

8. 193-2186 HOUSING GP

HOUSING GP-FRONT

9. 166-5427 HOUSING GP
0. INFORMATION

TRACK-TYPE TRACTOR D10N TRACK-TYPE TRACTOR 2YD
3412E Engine Emissions Retrofit Repower Tier II For D10N 2YD00001-UP (MACHINE) SEBP4387 D10N 2YD (1987)

BASIC ENGINE

CYLINDER HEAD GP

143-0046 CYLINDER HEAD AS

143-0047 CYLINDER HEAD AS

192-1322 CYLINDER HEAD AS

108-1887 CYLINDER HEAD GP

172-6507 CYLINDER HEAD GP

124-4456 PLUG GP-CYLINDER HEAD

#SEBP43870020

172-6507: CYLINDER HEAD GP

CYLINDER HEAD GP

172-6507 CYLINDER HEAD GP
S/N 5JJ3695-UP

i01776513 SEBP4387

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	108-1887 Y	[2]	CYLINDER HEAD GP
2.	141-6607	[2]	MANIFOLD (HEUI FLUID)
3.	106-1792	[24]	STUD-TAPERLOCK (3/8-16X4-IN)
4.	1D-4541	[12]	BOLT (5/16-18X3-IN)
5.	5P-7684	[4]	PLUG
6.	108-5806	[4]	SEAL-O-RING
7.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
8.	5M-2894	[10]	WASHER-HARD (10.2X18.5X2.5-MM THK)
9.	9S-8752	[26]	NUT-FULL (3/8-16-THD)
10.	108-5803	[2]	SEAL-O-RING
11.	9S-8006	[2]	PLUG (7/8-14-THD)
12.	1N-5999	[1]	PLUG-O-RING
13.	167-1709 Y	[1]	SENSOR GP-PRESSURE (INJECTION ACTUATION)
14.	124-6625	[1]	PLATE
15.	7W-3447	[7]	SPACER (10.2X19.05X10.2-MM THK)
16.	194-6724 Y	[1]	SENSOR GP-PRESSURE (BOOST AIR)
17.	9X-0263	[1]	ADAPTER
18.	6V-5048	[1]	SEAL-O-RING
19.	9S-8004	[4]	PLUG (9/16-18-THD)
20.	6V-5049	[4]	SEAL-O-RING
21.	2K-2813	[40]	BOLT (3/4-16X10-IN)
	5H-1504	[40]	WASHER-HARD (20X33.5X5-MM THK)
22.	061-8561	[12]	SEAL-O-RING
23.	6V-5266	[12]	SEAL-O-RING
24.	107-9570	[24]	SEAL-O-RING
25.	108-0219	[12]	SLEEVE
26.	225-3099	[2]	GASKET-CYLINDER HEAD
27.	2N-7174	[12]	GASKET
28.	359-1439	[48]	SEAL AS-WATER
29.	1U-8846 B		SEALANT-GASKET
30.	033-6027	[2]	SEAL-O-RING
31.	124-6626	[1]	PLATE
32.	172-6508	[2]	BRACE
33.	9X-6458	[9]	WASHER-HARD (10.2X22.5X3-MM THK)
34.	3K-3256	[14]	STUD-TAPERLOCK (3/8-16X1.7-IN)
	B		USE AS REQUIRED
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP43870021

6N-2229: DAMPER GP

DAMPER GP

6N-2229 DAMPER GP
S/N 5JJ3695-UP

i00089692 SEBP4387

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-6037	[1]	ADAPTER-DAMPER
2.	2D-6374	[8]	BOLT (5/8-18X6.75-IN)
3.	0S-1585	[12]	BOLT (1/2-13X1.5-IN)
4.	6N-7654	[1]	SPACER (6.312X8.18X0.312-IN THK)
5.	167-8130	[1]	DAMPER AS
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP43870022

180-0523: DRIVE GP-ACCESSORY

DRIVE GP-ACCESSORY

180-0523 DRIVE GP-ACCESSORY
S/N 5JJ3695-UP

i01212112 SEBP4387

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-8038	[1]	GEAR-CAMSHAFT (44-TEETH)
2.		[1]	PULLEY (8-GROOVE)
3.	179-2868	[1]	BRACKET AS
	1F-0750	[2]	NUT-WELD (3/8-16-THD)
4.	192-3438	[1]	TUBE AS
5.	193-8414 Y	[1]	DRIVE GP-ACCESSORY
6.	0S-1595	[2]	BOLT (1/2-13X1.25-IN)
7.	1A-9579	[4]	BOLT (5/16-18X1.5-IN)
8.	2B-2404	[1]	CLIP
9.	2K-0337	[1]	LOCKNUT (3/4-16-THD)
10.	3P-1823	[1]	ADAPTER-PIPE
11.	4J-5477	[2]	SEAL-O-RING
12.	7X-0492	[1]	ELBOW
13.	7X-5331	[1]	ELBOW
14.	9S-8752	[2]	NUT-FULL (3/8-16-THD)
15.	9X-7371	[1]	SEAL-O-RING
16.	0S-1591	[2]	BOLT (3/8-16X1.5-IN)
17.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	Y		SEPARATE ILLUSTRATION

#SEBP43870023

193-8414: DRIVE GP-ACCESSORY

DRIVE GP-ACCESSORY

193-8414 DRIVE GP-ACCESSORY
S/N 5JJ3695-UP
PART OF 180-0523 DRIVE GP-ACCESSORY

i01440199 SEBP4387

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8J-0422	[2]	CUP-BEARING
2.	8J-0423	[1]	CONE-BEARING
3.	000-6281	[1]	CONE-BEARING
4.	177-3036	[1]	ADAPTER
5.	179-1255	[1]	SHAFT-GEAR
6.	179-4230	[1]	SEAL-LIP TYPE
7.	190-5069	[1]	NUT
8.	194-5041	[1]	WASHER-HARD

#SEBP43870024

168-5063: DRIVE GP-FAN

DRIVE GP-FAN

168-5063 DRIVE GP-FAN
S/N 2YD1-UP; 3SK1-UP
PART OF 281-0731 INSTALLATION GP-ENGINE

i01442377 SEBP4387

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8485	[1]	ELBOW
2.	5K-3772	[1]	HOSE AS
3.	5M-8009	[1]	PIN-SPRING
4.	5P-4625	[1]	BOLT (5/8-11X11-IN)
5.	6I-0976	[1]	SLEEVE
6.	6I-0977	[1]	SPACER (63.9X90X106.8-MM THK)
7.	6I-1684	[1]	PLATE
8.	6Y-7651	[2]	CONE-BEARING
9.	6Y-7652	[2]	CUP-BEARING (TAPERED ROLLER)
10.	1K-4649	[1]	SPACER (0.516X1X1-IN THK)
11.	150-1960	[1]	PULLEY (1-GROOVE, 4-GROOVE)
12.	164-5025	[1]	ADAPTER
13.	180-4526	[1]	V-BELT SET (INCLUDES 4-BELTS)(FAN DRIVE)
14.	180-9639	[1]	HUB
15.	191-8242	[1]	BRACKET AS
	1S-9209	[1]	SHAFT-TIGHTENER
	4N-0955	[1]	DOWEL
	6I-0975	[1]	SHAFT
16.	4S-7523	[2]	STUD-TAPERLOCK (1/2-13X4.5-IN)
17.	5F-3999	[1]	SEAL-O-RING
18.	6V-8188	[2]	NUT (1/2-13-THD)
19.	7X-0328	[1]	BOLT (1/2-13X3.5-IN)
20.	7X-0332	[1]	BOLT (1/2-13X4.5-IN)
21.	8C-5222	[1]	SEAL-LIP TYPE
22.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	8T-8917	[6]	BOLT (1/2-13X1.25-IN)
24.	9B-7237	[6]	BOLT (3/8-16X1.25-IN)

#SEBP43870025

107-3752: FLYWHEEL GP

FLYWHEEL GP

107-3752 FLYWHEEL GP
S/N 5JJ3695-UP

i00470379 SEBP4387

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-2922	[1]	FLYWHEEL AS
2.	4N-2514	[1]	GEAR (113-TEETH)
3.	5L-2683	[12]	BOLT (5/8-18X5.25-IN)
	4D-3704	[12]	WASHER-HARD (17X30X5-MM THK)

#SEBP43870026

127-3516: GEAR GP-FRONT

GEAR GP-FRONT

127-3516 GEAR GP-FRONT -TIMING
S/N 5JJ3695-UP

i00090428 SEBP4387

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2B-2695	[4]	BOLT (5/16-18X0.875-IN)
2.	112-9217	[1]	PLATE-THRUST
3.	2W-4087	[1]	GEAR AS-IDLER (35-TEETH)
	6N-0977	[1]	BUSHING
4.	2W-3875	[1]	GEAR-OIL PUMP DRIVE (56-TEETH)
5.	1P-7346	[1]	WASHER-HARD (10.2X35X6-MM THK)
6.	0S-1571	[1]	BOLT (3/8-16X1.75-IN)
7.	124-7609	[1]	GEAR-PUMP IDLER (86-TEETH)
8.	7S-5005	[2]	DOWEL
9.	6N-1025	[1]	SHAFT-PUMP IDLER
	4H-1641	[1]	PIN-SPRING
10.	3B-1915	[2]	BOLT (3/8-16X1.375-IN)
11.	6N-1027	[1]	PLATE-THRUST
12.	0T-0573	[1]	BOLT (3/8-16X2.75-IN)
13.	271-5656	[1]	GEAR AS-IDLER (99/43-TEETH)
	1B-8705	[1]	KEY-WOODRUFF
	131-7123	[1]	BUSHING
14.	117-9712	[1]	SHAFT-DRIVE IDLER
15.	3G-2292	[5]	BOLT-LOCKING (3/8-16X0.87-IN)
16.	7N-2443	[1]	WASHER-THRUST (2.508X3.5X0.188-IN THK)
17.	5M-2894	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
18.	101-6713	[1]	PLATE-RETAINING
19.	5P-5855	[4]	BOLT-12 POINT HEAD (1/2-13X1.75-IN)

#SEBP43870027

193-2185: GEAR GP-REAR

GEAR GP-REAR

193-2185 GEAR GP-REAR
S/N 5JJ3695-UP

i01440085 SEBP4387

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5M-2894	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
2.	9Y-9929	[2]	ADAPTER AS
			(EACH INCLUDES)
2A.	1T-0550	[2]	PIN-SPRING
3.	2W-7615	[2]	GEAR-IDLER (64-TEETH)
4.	2W-7614	[1]	GEAR-CRANKSHAFT (64-TEETH)
5.	030-8194	[1]	CONNECTOR
6.	136-7227	[1]	SEAL-O-RING
7.	8N-7806 I	[1]	HOSE AS
8.	032-1267	[1]	CONNECTOR (STRAIGHT)
9.	4N-0684	[1]	DOWEL
10.	2W-7610	[2]	GEAR (64-TEETH)
11.	5P-8429	[2]	SEAL-O-RING
12.	4N-7183	[2]	RING-RETAINING
13.	1T-0720	[12]	BOLT-12 POINT HEAD (3/8-16X1.25-IN)
14.	5P-1370	[2]	BEARING AS-ROLLER
15.	6V-7423	[2]	BEARING AS-ROLLER
16.	1D-4566	[8]	BOLT (1/2-13X3.5-IN)
17.	4N-1235	[2]	SHAFT-IDLER GEAR
18.	5K-9065	[2]	RING-RETAINING
19.	4N-0848	[1]	SLEEVE-WEAR
20.	502-4034	[1]	SEAL-O-RING
21.	1A-2029	[18]	BOLT (3/8-16X1.125-IN)
22.	4N-1232	[2]	WASHER-RETAINING
23.	5P-8247	[4]	WASHER-HARD (17X32X3.5-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP43870028

193-2186: HOUSING GP-FLYWHEEL

HOUSING GP-FLYWHEEL

193-2186 HOUSING GP-FLYWHEEL
S/N 5JJ3695-UP

i01440088 SEBP4387

1932186 HOUSING GP-FLYWHEEL Parts scheme

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-3189	[6]	SPACER (10X18X20-MM THK)
2.	2H-6488	[8]	BOLT (1/2-13X5-IN)(MARKED X)
3.	2P-2772	[2]	COVER
4.	234-8937	[2]	SEAL-INTEGRAL
5.	8M-9124	[1]	WASHER (10X22.5X8-MM THK)
6.	161-7293	[1]	GASKET-CYLINDER
7.	0L-1352	[1]	BOLT (3/8-16X3.25-IN)
8.	0S-1590	[6]	BOLT (3/8-16X2-IN)(MARKED Y)
9.	0S-1619	[4]	BOLT (3/8-16X3-IN)
10.	198-3038	[1]	HOUSING AS-FLYWHEEL
	1W-3136	[1]	BAFFLE
11.	1A-2029	[2]	BOLT (3/8-16X1.125-IN)
12.	1A-5964	[2]	BOLT (3/8-16X4.5-IN)
13.	3D-2871	[2]	STUD-TAPERLOCK (3/8-16X1.5-IN)
14.	3S-0036	[2]	PLUG-CORE
15.	5M-2894	[10]	WASHER-HARD (10.2X18.5X2.5-MM THK)
16.	5P-8245	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
17.	8T-6761	[1]	PLUG-PIPE (1-11-1/2 NPT THD)
18.	8T-6765	[3]	PLUG-PIPE (1/4-18-THD)
19.	9M-4225	[2]	BOLT (3/8 NCX4 3/8)
20.	230-6262 B		SEALANT
	B		USE AS REQUIRED

#SEBP43870029

166-5427: HOUSING GP-FRONT

HOUSING GP-FRONT

166-5427 HOUSING GP-FRONT
S/N 5JJ3695-4381

i02209338 SEBP4387

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	172-9313	[1]	HOUSING-TIMING GEAR
2.	242-0778 C	[1]	SUPPORT AS
3.	0L-1143 C	[1]	BOLT (3/8-16X2.5-IN)
4.	0T-0573	[3]	BOLT (3/8-16X2.75-IN)
5.	129-6628 Y	[2]	SENSOR GP-SPEED (ENGINE TIMING)
6.	166-9145	[1]	GASKET-CYLINDER BLOCK
7.	2K-4973	[1]	LOCKNUT (3/8-16-THD)
8.	3K-3256	[1]	STUD-TAPERLOCK (3/8-16X1.7-IN)
9.	4B-8641	[1]	STUD (3/8-16X2.24-IN)
10.	5B-9603 C	[2]	BOLT (3/8-16X5-IN)
11.	5M-2894 C	[7]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

Information:

BASIC ENGINE

CYLINDER HEAD GP

Engine News

A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13

Special Instruction

Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}

Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}

Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}

Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}

Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}

Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}

Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Service Letter-NACD

Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E, 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834B Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E, 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834B Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Service Letter-Australia

Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Service Letter-CFEL

Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Service Letter-CSARL

Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Service Letter-Americas

Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Diagnosing Fuel Dilution of Engine Oil for C27 and C32 Engines{1101, 1124, 1251, 1280, 1290}
Diagnosing Fuel Dilution of Engine Oil for C27 and C32 Engines{1101, 1124, 1251, 1280, 1290}

Specifications

Valves, Valve Springs And Valve Seat Inserts
3412 ENGINE FOR CATERPILLAR BUILT MACHINES

Cylinder Heads
3412 ENGINE FOR CATERPILLAR BUILT MACHINES

Cylinder Head Valves
3408E and 3412E Engines for Caterpillar Built Machines

Cylinder Head
3408E and 3412E Engines for Caterpillar Built Machines

Tool Operating Manual

Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}

Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}

185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}

188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}

CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}

Service Letter-China

Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Service Letter-Asia

Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Reuse And Salvage Guidelines

Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}

Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}

Applied Failure Analysis

Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}

Information Release Memo

CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS

Service Letter-APD

Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Testing and Adjusting

Engine Valve Lash - Inspect/Adjust
3408E and 3412E Engines for Caterpillar Built Machines

Cylinder Head - Inspect
3408E and 3412E Engines for Caterpillar Built Machines

Disassembly and Assembly

Valve Covers
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Valve Cover Bases (Earlier)
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Valve Cover Bases (Later)
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Push Rods, Valve Lifters And Valve Bridges
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Fuel Injection Nozzles And Adapters (Later)
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Cylinder Heads
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Valves
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Valve Seat Inserts
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Valve Guides
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Bridge Dowels
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS

Unit Injector Sleeve - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Unit Injector Sleeve - Install
3408E and 3412E Engines for Caterpillar Built Machines

Inlet and Exhaust Valves - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Seat Inserts - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Guides - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Install
3408E and 3412E Engines for Caterpillar Built Machines

HEUI Fluid Manifold - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines

Cylinder Head - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Cylinder Head - Install
3408E and 3412E Engines for Caterpillar Built Machines

Camshaft Bearings - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines

Camshaft Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Camshaft Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines

Camshaft Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines

Camshaft Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines

Electronic Unit Injector Sleeve - Install
C27 and C32 Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Guides - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Springs - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Inlet and Exhaust Valves - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Head - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Cylinder Head - Install
3408E and 3412E Engines for Caterpillar Built Machines

Electronic Unit Injector Sleeve - Remove
C27 and C32 Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Seat Inserts - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Remove
C27 and C32 Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Install
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Head - Remove - C32
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Head - Install - C32
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Head - Remove - C27
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Head - Install - C27
C27 and C32 Engines for Caterpillar Built Machines

Service Magazine

Reconditioning of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1100}
1982/03/08

Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06

Improved Inlet And Exhaust Valves{1105}
1982/09/06

Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20

Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28

New Liner Seat Insert Available{1217}
1983/08/15

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17

New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27

Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23

Surface Grinding Of Compacted Graphite Iron Cylinder Heads{1101}
1984/07/02

New Inlet Valve Used{1105}
1984/09/03

New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15

Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14

Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07

Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08

Improved Exhaust Valve Now Available{1105}
1977/02/28

Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16

Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22

Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30

Silicone Rubber Water Seals Available{1100}
1987/07/06

Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30

Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06

Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24

A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26

Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30

New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08

Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07

New Intake And Exhaust Valves Used{1105,1100}
1994/06/20

New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance{1123,1100}
1994/06/20

New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04

Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/05

New Water Seals Used In Cylinder Head Assemblies{1124}
1994/09/05

New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/20

New And Reconditioned Valve Projection Specifications{1105}
1995/08/28

Be Sure To Use The Correct Inlet And Exhaust Valves In Engines Equipped With Valve Bridges That Do Not Ride On Dowels {1105,1121}
1998/02/16

Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03

Use the Correct Remanufactured Cylinder Heads and Valves {1101, 1105}
2006/03/13

Clearly Mark all of the Cracks on the Cylinder Head {1101, 7754}
2006/04/10

A New Outer Valve Spring Is Now Used {1100, 1108}
2008/11/17

Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Machine Engines {1100}
2012/05/08

A New Water Seal Assembly Is Now Used on All 3408 and 3412 Engines {1100, 7555}
2013/08/06

Cat<SUP>®</SUP> Reman Now Offers Upgrade to New Cylinder Heads for Certain Machine Engines {1100}
2014/10/03

Caterpillar Parts SIS Catalog D10N :

108-1887 CYLINDER HEAD GP

192-1322 CYLINDER HEAD AS

143-0047 CYLINDER HEAD AS

143-0046 CYLINDER HEAD AS

126-1373 CYLINDER BLOCK GP

109-9010 CYLINDER BLOCK GP

126-1375 CYLINDER BLOCK AS

126-1372 CYLINDER BLOCK AS

6N-2229 DAMPER GP

180-0523 DRIVE GP-ACCESSORY

193-8414 DRIVE GP-ACCESSORY

168-5063 DRIVE GP-FAN

107-3752 FLYWHEEL GP

127-3516 GEAR GP-FRONT

193-2185 GEAR GP-REAR

193-2186 HOUSING GP-FLYWHEEL

Truck sale:

Caterpillar D10N
- Crawler dozers
TRACTOR & EQUIPMENT CO.

150.000

Caterpillar D10N, Bulldozer, Bau-Und Bergbauausrüstung
- Crawler dozers
TRACTOR & EQUIPMENT CO.

Caterpillar D10N, Construction
- Crawler dozers

75,000

Caterpillar D10N, Construction
- Dozers
CATERPILLAR FINANCIAL SERVICES CORPORATION

Caterpillar D10N, Construction
- Dozers
WHEELER MACHINERY CO.