AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

370-9889 VALVE MECHANISM GP S/N 2GR8285-UP D11N TRACK-TYPE TRACTOR


BASIC ENGINE
VALVE MECHANISM GP
LUBRICATION SYSTEM
BREATHER GP
LINES GP-ENGINE OIL
FILLER GP-ENGINE OIL
FILTER GP-ENGINE OIL
BREATHER GP
GAUGE GP-OIL LEVEL (DIPSTICK)

TRACK-TYPE TRACTOR D11N TRACK-TYPE TRACTOR 74Z
 3508B Engine Emissions Retrofit Repower Tier I For D11N Tractor 74Z00001-UP (MACHINE) SEBP4390 D11N 74Z   (1986)

BASIC ENGINE

VALVE MECHANISM GP
VALVE MECHANISM GP
224-9869 VALVE MECHANISM GP
VALVE MECHANISM GP
224-9869 VALVE MECHANISM GP
VALVE MECHANISM GP
370-9889 VALVE MECHANISM GP
 

#SEBP43900110
 

370-9889: VALVE MECHANISM GP

370-9889 VALVE MECHANISM GP
S/N 2GR8285-UP
i04548089 SEBP4390
3709889 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your D11N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-9196 [2] NUT-JAM (1/2-20-THD)  
2. 7E-6508 [1] CAP AS  
3. 7N-4782 [2] SPRING-LIFTER GUIDE  
4. 9F-7707 [3] RING-RETAINING  
5. 317-1121 [1] NUT-JAM (5/8-18-THD)  
6. 9X-0352 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
7. 100-3877 [1] RETAINER-SPRING  
8. 100-3878 [1] SPRING-INJECTOR  
9. 100-3879 [1] PUSHROD-INJECTOR  
10. 100-3880 [2] PUSHROD-VALVE  
11. 132-6469 Y [1] HARNESS AS-WIRING (VALVE MECHANISM)  
12. 154-6389 [3] BUTTON  
13. 358-0768 [2] SCREW-ADJUSTING (1/2-20X2.42-IN)  
14. 380-4843 [1] SCREW-ADJUSTING (5/8-18X2.375-IN)  
15. 230-2621 [2] ROCKER ARM AS (VALVE)  
    (EACH INCLUDES)
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
16. 230-2633 [1] SHAFT AS (ROCKER ARM)  
  155-4094 [1] PIN-SPRING  
17. 240-7032 [1] SEAL  
18. 247-8341 Y [1] BASE GP-VALVE COVER  
19. 416-8319 [2] LIFTER AS-VALVE  
20. 265-7537 [1] BRIDGE (INLET)  
21. 265-7538 [1] BRIDGE (EXHAUST)  
22. 281-6159 [1] ROCKER ARM AS (INJECTOR)  
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
23. 282-7944 [1] LIFTER AS-INJECTOR  
25. 334-1626 [2] BOLT (3/8-16X2-IN)  
26. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
27. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 5P-7530 [1] SEAL-O-RING  
30. 6J-2245 [1] SEAL-O-RING  
31. 8D-7942 [2] BOLT-12 POINT HEAD (5/8-11X6.5-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP43900111
 

448-0420: BREATHER GP

448-0420 BREATHER GP -CRANKCASE
S/N 2GR8285-UP
i05781533 SEBP4390
4480420 BREATHER GP Parts scheme
  For full view, you need register

Parts for your D11N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-3027 [2] BREATHER AS (CRANKCASE)  
2. 4W-3034 [2] CLAMP-HOSE  
3. 033-6031 [2] SEAL-O-RING  
 

#SEBP43900112
 

7E-9081: BREATHER GP

7E-9081 BREATHER GP
S/N 2GR1-8284
i00390496 SEBP4390
7E9081 BREATHER GP Parts scheme
  For full view, you need register

Parts for your D11N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-4199 [1] COVER AS  
2. 4W-3027 [1] BREATHER AS (CRANKCASE)  
3. 5P-0597 [1] CLAMP-HOSE  
4. 4W-3034 [1] CLAMP-HOSE  
5. 272-0760 [1] SEAL-VALVE COVER (BREATHER)  
6. 033-6031 [1] SEAL-O-RING  
7. 1A-9579 [4] BOLT (5/16-18X1.5-IN)  
8. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP43900113
 

445-8598: FASTENER GP-ENGINE OIL LINES

445-8598 FASTENER GP-ENGINE OIL LINES
S/N 2GR8285-UP
i05781519 SEBP4390
4458598 FASTENER GP-ENGINE OIL LINES Parts scheme
  For full view, you need register

Parts for your D11N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
2. 1A-5964 [1] BOLT (3/8-16X4.5-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP43900114
 

1W-0419: FILLER GP-ENGINE OIL

1W-0419 FILLER GP-ENGINE OIL
S/N 2GR1-UP
i00355256 SEBP4390
1W0419 FILLER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your D11N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0T-0055 [1] BOLT (3/8-16X4.25-IN)  
2. 2W-0752 C [1] GASKET  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 5P-8502 [1] PADLOCK GP (ENGINE OIL FILL TUBE)  
  5P-8500 [1] KEY  
  8Y-6364 [1] SLEEVE  
5. 6N-2206 C [1] CAP AS-FILLER  
6. 7C-4060 C [1] TUBE AS  
7. 7C-5694 C [1] HASP  
8. 039-6937 C [1] BOLT-SPECIAL  
9. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
10. 2D-6235 C [1] LOCKNUT (1/4-20-THD)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP43900115
 

1W-0714: FILTER GP-ENGINE OIL

1W-0714 FILTER GP-ENGINE OIL
S/N 2GR1-2632
i00355323 SEBP4390
1W0714 FILTER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your D11N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 B [3] BOLT (3/8-16X1.75-IN)  
2. 9S-8752 B [3] NUT-FULL (3/8-16-THD)  
3. 1P-1367 [2] PLUNGER (RELIEF VALVE)  
4. 1S-7106 [2] COVER  
5. 1W-2750 [1] ADAPTER-BASE  
6. 2P-4005 [2] FILTER AS-ENGINE OIL  
7. 7F-9090 [4] SCREW-DRIVE (NO 8X3/8-IN)  
8. 7G-6713 [2] SPRING-MAIN  
9. 8C-3445 [1] CAP-DUST  
10. 8C-3446 [1] VALVE-SAMPLING (ENGINE OIL)  
11. 8N-2001 [2] BASE AS-OIL FILTER  
    (EACH INCLUDES)
  2P-4304 [1] STUD-HOLLOW  
12. 9S-9271 [1] COUPLER-MALE  
13. 9S-9272 [1] CAP AS (ENGINE OIL)  
14. 9Y-8387 [2] GASKET  
15. 9Y-8388 [3] GASKET  
16. 111-6119 [2] SHIELD  
17. 141-7110 [1] PLATE-DRAIN  
18. 0S-1571 [3] BOLT (3/8-16X1.75-IN)  
19. 0S-1591 [13] BOLT (3/8-16X1.5-IN)  
20. 0S-1594 [6] BOLT (3/8-16X1-IN)  
21. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
22. 1A-5964 [1] BOLT (3/8-16X4.5-IN)  
23. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
24. 2M-9780 [1] SEAL-O-RING  
25. 3J-7354 [1] SEAL-O-RING  
26. 6V-5048 [1] SEAL-O-RING  
27. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-4182 [1] PLUG (7/16-20-THD)  
29. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
30. 9S-8752 [18] NUT-FULL (3/8-16-THD)  
  B   USE AS REQUIRED
 

#SEBP43900116
 

1W-0714: FILTER GP-ENGINE OIL

1W-0714 FILTER GP-ENGINE OIL
S/N 2GR2633-8284
i01389699 SEBP4390
1W0714 FILTER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your D11N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 B [3] BOLT (3/8-16X1.75-IN)  
2. 9S-8752 B [3] NUT-FULL (3/8-16-THD)  
3. 1P-1367 [2] PLUNGER (RELIEF VALVE)  
4. 1S-7106 [2] COVER  
5. 1W-2750 [1] ADAPTER-BASE  
6. 275-2604 [2] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
    -OR-
  244-4484 [2] FILTER-ENGINE OIL (ULTRA HIGH EFFICIENCY)  
    -OR-
  272-1788 [2] FILTER-ENGINE OIL (STANDARD EFFICIENCY)  
7. 7F-9090 [4] SCREW-DRIVE (NO 8X3/8-IN)  
8. 7G-6713 [2] SPRING-MAIN  
9. 8C-3445 [1] CAP-DUST  
10. 8C-3446 [1] VALVE-SAMPLING (ENGINE OIL)  
11. 9S-9271 [1] COUPLER-MALE  
12. 9S-9272 [1] CAP AS  
13. 9Y-8387 [2] GASKET  
14. 9Y-8388 C [2] GASKET  
15. 111-6119 [2] SHIELD  
16. 141-7110 [1] PLATE-DRAIN  
17. 151-9270 C [1] BASE AS-OIL FILTER  
  485-2866 [2] STUD  
18. 0S-1571 [3] BOLT (3/8-16X1.75-IN)  
19. 0S-1591 C [6] BOLT (3/8-16X1.5-IN)  
20. 1A-2029 [6] BOLT (3/8-16X1.125-IN)  
21. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
22. 1A-5964 [1] BOLT (3/8-16X4.5-IN)  
23. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
24. 2M-9780 [1] SEAL-O-RING  
25. 3J-7354 [1] SEAL-O-RING  
26. 6V-5048 [1] SEAL-O-RING  
27. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-4182 [1] PLUG (7/16-20-THD)  
29. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
30. 9S-8752 C [11] NUT-FULL (3/8-16-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP43900117
 

445-8610: FILTER GP-ENGINE OIL

445-8610 FILTER GP-ENGINE OIL
S/N 2GR8285-UP
i05781523 SEBP4390
4458610 FILTER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your D11N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-1367 [2] PLUNGER (RELIEF VALVE)  
2. 1W-2750 [1] ADAPTER-BASE  
3. 7G-6713 [2] SPRING-MAIN  
4. 8C-3445 [1] CAP-DUST  
5. 8C-3446 [1] VALVE-SAMPLING  
6. 9S-9271 [1] COUPLER-MALE  
7. 9S-9272 [1] CAP AS  
8. 9Y-8388 [2] GASKET  
9. 111-6119 [2] SHIELD  
10. 141-7110 [1] PLATE-DRAIN  
11. 151-9270 [1] BASE AS-OIL FILTER  
  485-2866 [2] STUD  
12. 275-2604 [2] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
    -OR-
  272-1788 [2] FILTER-ENGINE OIL (STANDARD EFFICIENCY)  
    -OR-
  244-4484 [2] FILTER-ENGINE OIL (ULTRA HIGH EFFICIENCY)  
13. 0S-1571 [3] BOLT (3/8-16X1.75-IN)  
14. 0S-1591 [6] BOLT (3/8-16X1.5-IN)  
15. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
16. 1A-2029 [6] BOLT (3/8-16X1.125-IN)  
17. 1A-5964 [1] BOLT (3/8-16X4.5-IN)  
18. 1S-7106 [2] COVER  
19. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
20. 2M-9780 [1] SEAL-O-RING  
21. 3J-7354 [1] SEAL-O-RING  
22. 6V-5048 [1] SEAL-O-RING  
23. 7F-9090 [4] SCREW-DRIVE (NO 8X3/8-IN)  
24. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
25. 9S-4182 [1] PLUG (7/16-20-THD)  
26. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
27. 9S-8752 [11] NUT-FULL (3/8-16-THD)  
28. 9Y-8387 [2] GASKET  
 

#SEBP43900118
 

230-1069: FUMES DISPOSAL GP

230-1069 FUMES DISPOSAL GP
S/N 2GR1-UP
i02047041 SEBP4390
2301069 FUMES DISPOSAL GP Parts scheme
  For full view, you need register

Parts for your D11N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4724 [2] CLAMP-HOSE  
2. 7K-1181 [4] STRAP-CABLE  
3. 200-6345 [1] SADDLE-MOUNTING (DUAL SWIVEL)  
4. 204-2281 [2] STRAP-CABLE  
5. 230-1062 [2] HOSE AS  
6. 4P-8134 [4] CLIP (LADDER)  
 

#SEBP43900119
 

1W-0417: GAUGE GP-OIL LEVEL (DIPSTICK)

1W-0417 GAUGE GP-OIL LEVEL (DIPSTICK) -ENGINE
S/N 2GR1-UP
i00355250 SEBP4390
1W0417 GAUGE GP-OIL LEVEL (DIPSTICK) Parts scheme
  For full view, you need register

Parts for your D11N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-0692 [4] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [1] GROMMET  
2. 5P-8502 [1] PADLOCK GP (ENGINE OIL FILL TUBE)  
  5P-8500 A [1] KEY  
  8Y-6364 A [1] SLEEVE  
3. 7E-0595 C [1] GUIDE AS  
4. 110-2741 [1] GAUGE AS-OIL LEVEL (DIPSTICK) (ENGINE)  
5. 0L-1143 [1] BOLT (3/8-16X2.5-IN)  
6. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
7. 4S-7907 [1] GASKET  
8. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
9. 5M-2894 C [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Importance of Proper Valve Lash Setting {1102, 1121, 1123}
2012/10/04
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Special Instruction
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Specifications
Fuel Injector Mechanism
3500B Engines for Excavators
Valve Mechanism
3500B Engines for Excavators
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
Systems Operation
Fuel Injector Mechanism
3508B Engine for Caterpillar Built Machines
Valve Mechanism
3500B Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Testing and Adjusting
Finding the Top Center Position for the No. 1 Piston
3508B Engine for Caterpillar Built Machines
Valve Lash and Valve Bridge Adjustment
3500B Engines for Caterpillar Built Machines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3508B Engine for Caterpillar Built Machines
Valve Lash Check
3508B Engine for Caterpillar Built Machines
Disassembly and Assembly
Rocker Shaft and Push Rods - Remove
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Rocker Shaft - Assemble
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Rocker Shaft - Disassemble
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Rocker Shaft and Pushrod - Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Valve Mechanism Cover Base - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Service Magazine
The Spring Seat Washer Is Now A Serviceable Component Of The Rocker Arm Cover Base Assembly {1102}
2000/10/30
Addition to Specifications "Valve Mechanism" {1123}
2005/02/28
New Cover Seals are Available {1107, 1201, 1316, 1317, 1336}
2003/03/24
Maintenance Intervals for Valve Bridge and Valve Lash Adjustment of 3500 and C175 Machine Engines {1102}
2013/05/13
A Pin for the Rocker Shaft Is Now Available for Parts Service {1102}
2003/07/28
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2003/12/22
Improved Lifters are Now Used {1102, 1121, 1123}
2005/01/31
New Sleeve Bearing in the Rocker Arm {1123}
2005/02/21
A New Bolt Is Used on the Valve Mechanism Gp of All 3500 Machine Engines {1102, 1107, 1120, 1121, 1123, 1209}
2009/08/31
A New Valve Lifter Assembly Is Used in 3500B Engines {1209}
2012/12/03
Importance of Proper Valve Lash Setting {1102, 1121, 1123, 1209}
2012/10/03
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08

Caterpillar Parts SIS Catalog D11N :

VALVE MECHANISM GP
224-9869 VALVE MECHANISM GP
VALVE MECHANISM GP
224-9869 VALVE MECHANISM GP
VALVE MECHANISM GP
224-9869 VALVE MECHANISM GP
TRUNNION GP-ENGINE
7N-1863 TRUNNION GP-ENGINE
TRUNNION GP-ENGINE
382-6483 TRUNNION GP-ENGINE
SPACER GP-BLOCK
445-8603 SPACER GP-BLOCK
SEAL GP-CRANKSHAFT
184-2444 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
184-2444 SEAL GP-CRANKSHAFT
BREATHER GP
448-0420 BREATHER GP
BREATHER GP
7E-9081 BREATHER GP
FASTENER GP-ENGINE OIL LINES
445-8598 FASTENER GP-ENGINE OIL LINES
FILLER GP-ENGINE OIL
1W-0419 FILLER GP-ENGINE OIL
FILTER GP-ENGINE OIL
1W-0714 FILTER GP-ENGINE OIL
FILTER GP-ENGINE OIL
1W-0714 FILTER GP-ENGINE OIL
FILTER GP-ENGINE OIL
445-8610 FILTER GP-ENGINE OIL
FUMES DISPOSAL GP
230-1069 FUMES DISPOSAL GP

Truck sale:

Caterpillar D11N
 
Caterpillar D11N
- Crawler dozers
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar D11N
 
Caterpillar D11N
- Crawler dozers
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar D11N
 
Caterpillar D11N
- Crawler dozers
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
 
 
Caterpillar D11 NG, Bulldozer, Bau-Und Bergbauausrüstung


 
150.000 
Caterpillar D11N, Bulldozer, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.