AIR INLET AND EXHAUST SYSTEM
VALVE GP-SOLENOIDFUEL SYSTEM
CONTROL GP-GOVERNORCONTROL GP-FUEL RATIO
CONTROL GP-GOVERNOR
GOVERNOR GP
FILTER GP-FUEL
AIR INLET AND EXHAUST SYSTEM
VALVE GP-SOLENOID
#SEBP43950510
164-0717: VALVE GP-SOLENOID
164-0717 VALVE GP-SOLENOID (CHG -00 THRU -02)
24 VDC
PART OF 219-2856 LINES GP-AIR
24 VDC
PART OF 219-2856 LINES GP-AIR
For full view, you need register
Parts for your C280-8 MARINE ENGINE:
CATERPILLAR SIS#SEBP43950511
384-7814: VALVE GP-SOLENOID
384-7814 VALVE GP-SOLENOID (CHG -00)
PART OF 441-3759 CONTROL & LINES GP-BYPASS
PART OF 441-3759 CONTROL & LINES GP-BYPASS
For full view, you need register
Parts for your C280-8 MARINE ENGINE:
CATERPILLAR SIS#SEBP43950512
161-0797: CONTROL AS-GOVERNOR
161-0797 CONTROL AS-GOVERNOR -LOAD SHARE (CHG -00 THRU -05)
For full view, you need register
Parts for your C280-8 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP43950513
309-1583: CONTROL AS-GOVERNOR
309-1583 CONTROL AS-GOVERNOR -LOAD SHARE (CHG -00 THRU -02)
For full view, you need register
Parts for your C280-8 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP43950514
249-7007: CONTROL GP-FUEL RATIO
249-7007 CONTROL GP-FUEL RATIO (CHG -01)
PART OF 235-5175, 273-6313 CONTROL & MTG GP-ENGINE ELEK
PART OF 235-5175, 273-6313 CONTROL & MTG GP-ENGINE ELEK
For full view, you need register
Parts for your C280-8 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-1418 | [8] | SPACER (8.2X12.7X28.7-MM THK) | |
| 2. | 8T-9655 | [16] | MOUNT-ISOLATION | |
| 3. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 4. | 147-2969 | [1] | SENSOR GP-PRESSURE | |
| 5. | 149-9939 | [1] | FITTING | |
| 6. | 206-2710 Y | [2] | CONTROL GP-ENGINE ELECTRONIC | |
| 7. | 235-5113 | [1] | HARNESS AS-WIRING (DATA LINK) | |
| 232-0893 E | CONDUIT-FLEXIBLE (6.2-MM ID)(25-CM) | |||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 097-7404 S | TUBE-HEAT SHRINK (19.1-MM DIA)(1-DM) | |||
| 8T-8731 | [1] | PLUG-CONNECTOR (3-PIN) | ||
| 8. | 235-5114 | [2] | HARNESS AS-PANEL (ENGINE INTERCONNECT)(ECM J2) | |
| (EACH INCLUDES) | ||||
| 8N-1514 | [1] | PLUG AS-CONNECTOR (37-PIN) | ||
| 147-1443 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 231-9897 E | CONDUIT-FLEXIBLE (36-MM ID)(107-CM) | |||
| 237-4356 | [1] | ADAPTER-CONNECTOR | ||
| 9. | 235-5123 | [2] | HARNESS AS-PANEL (ENGINE INTERCONNECT)(ECM J1) | |
| (EACH INCLUDES) | ||||
| 8N-1514 | [1] | PLUG AS-CONNECTOR (37-PIN) | ||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 231-9897 E | CONDUIT-FLEXIBLE (36-MM ID)(92-CM) | |||
| 237-4356 | [1] | ADAPTER-CONNECTOR | ||
| 10. | 235-5155 Y | [1] | BOX GP-ELECTRONIC | |
| 11. | 235-5159 | [1] | BRACKET AS | |
| 8R-3857 M | [8] | BOSS (M8X1.25X12-MM) | ||
| 8T-3612 M | [6] | NUT-WELD (M8X1.25-THD) | ||
| 124-0065 | [2] | BLOCK | ||
| 12. | 235-5165 | [1] | BRACKET | |
| 13. | 235-5169 | [1] | HARNESS AS-SENSOR (ATMOSPHERIC PRESSURE) | |
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 9X-0482 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 8T-8731 | [1] | PLUG-CONNECTOR (3-PIN) | ||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
| 14. | 0T-0102 | [2] | BOLT (3/8-16X0.625-IN) | |
| 15. | 132-5789 | [2] | CLIP (LADDER) | |
| 16. | 3K-0360 | [1] | SEAL-O-RING | |
| 17. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 18. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 20. | 6K-0806 | [15] | STRAP-CABLE | |
| 21. | 8T-0276 M | [8] | BOLT (M8X1.25X45-MM) | |
| 22. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 23. | 9N-0869 | [16] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 24. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| S | ORDER BY DECIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43950515
294-8004: CONTROL GP-GOVERNOR
294-8004 CONTROL GP-GOVERNOR (CHG -00 THRU -02)
For full view, you need register
Parts for your C280-8 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 B | [8] | STRAP-CABLE | |
| 2. | 174-1433 D | [1] | INDUCTOR (50-MH) | |
| 3. | 175-4998 | [1] | CONVERTER-SIGNAL | |
| 4. | 252-4949 | [2] | BLOCK-TERMINAL (DOUBLE) | |
| 5. | 294-8005 | [1] | HARNESS AS-SENSOR | |
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(0.5-CM) | |||
| 6. | 339-2964 Y | [1] | RESISTOR GP | |
| 7. | 133-1645 | [2] | WASHER (7.2X19.1X3.1-MM THK) | |
| 8. | 8T-9367 | [1] | BOLT (1/4-20X2-IN) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43950516
294-8006: CONTROL GP-GOVERNOR
294-8006 CONTROL GP-GOVERNOR (CHG -00 THRU -02)
For full view, you need register
Parts for your C280-8 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 174-1433 | [1] | INDUCTOR (50-MH) | |
| 2. | 175-4998 | [1] | CONVERTER-SIGNAL | |
| 3. | 294-8007 | [1] | HARNESS AS-SENSOR | |
| 3S-2093 | [4] | STRAP-CABLE | ||
| 109-3038 | [11] | END-WIRE (16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 4. | 339-2964 Y | [1] | RESISTOR GP | |
| 5. | 133-1645 | [2] | WASHER (7.2X19.1X3.1-MM THK) | |
| 6. | 4P-7581 | [1] | CLIP (LADDER) | |
| 7. | 7X-2534 M | [1] | BOLT (M6X1X50-MM) | |
| 10. | 3S-2093 | [4] | STRAP-CABLE | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43950517
2W-1242: DRIVE GP-GOVERNOR
2W-1242 DRIVE GP-GOVERNOR (CHG -04, -05)
For full view, you need register
Parts for your C280-8 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-1027 | [1] | PINION-GOVERNOR DRIVE (33-TEETH) | |
| 2. | 1W-0608 | [1] | WASHER-THRUST | |
| 3. | 1W-0603 | [1] | HOUSING AS-DRIVE | |
| 4. | 6V-3537 | [2] | DOWEL | |
| 5. | 1W-0604 | [2] | BUSHING | |
| 6. | 1W-0605 | [2] | PIN-HOUSING SIDE | |
| 7. | 7N-2043 | [2] | DOWEL | |
| 8. | 1W-0609 | [1] | WASHER-RETAINING | |
| 9. | 1W-0611 B | [1] | SHIM (PACK) | |
| 10. | 0T-0573 | [4] | BOLT (3/8-16X2.75-IN) | |
| 11. | 0S-1571 | [6] | BOLT (3/8-16X1.75-IN) | |
| 12. | 3P-0647 | [4] | SEAL-O-RING | |
| 13. | 1W-0612 | [1] | COUPLING-GOVERNOR DRIVE | |
| 14. | 5S-9134 | [1] | SEAL-O-RING | |
| 15. | 6V-0973 | [1] | SEAL-O-RING | |
| 16. | 9Y-1026 C | [1] | GEAR-BEVEL (68-TEETH) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP43950518
7W-1543: FILTER GP-FUEL
7W-1543 FILTER GP-FUEL (CHG -04 THRU -13)
For full view, you need register
Parts for your C280-8 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-4940 | [1] | HOUSING AS-FILTER | |
| 2. | 7W-1547 | [1] | HOUSING-END | |
| 3. | 7C-1127 | [1] | TUBE | |
| 4. | 9S-4191 | [4] | PLUG (9/16-18-THD) | |
| 5. | 7C-0592 | [2] | VALVE-CHECK | |
| 6. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 7. | 165-3929 | [2] | BOLT (3/8-16X1.5-IN) | |
| 8. | 031-5744 | [1] | ELBOW | |
| 9. | 7W-1555 | [1] | TUBE AS | |
| 10. | 2K-7979 | [2] | BUSHING | |
| 11. | 5P-2242 | [1] | TEE-SWIVEL | |
| 14. | 7E-3129 | [2] | COVER | |
| 15. | 6V-7238 | [2] | VALVE-SHUTOFF (DRAIN) | |
| 16. | 0S-1588 | [1] | BOLT (3/8-16X1.25-IN) | |
| 18. | 7C-1128 | [1] | SHAFT AS | |
| 21. | 6V-5049 | [4] | SEAL-O-RING | |
| 22. | 5P-7701 | [2] | SEAL-O-RING | |
| 23. | 6V-5055 | [4] | SEAL-O-RING | |
| 24. | 1R-0766 | [8] | FILTER ELEMENT-FUEL | |
| 25. | 7W-8088 | [2] | RETAINER | |
| 26. | 4P-9171 | [2] | RACK-FUEL FILTER | |
| 27. | 2W-6862 | [2] | SPRING | |
| 28. | 8L-2786 | [2] | SEAL-O-RING | |
| 29. | 8J-4455 | [1] | BALL | |
| 30. | 7C-0807 | [1] | SPRING | |
| 31. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 32. | 6V-5048 | [2] | SEAL-O-RING | |
| 33. | 7W-1549 | [1] | COVER | |
| 34. | 5B-9603 | [2] | BOLT (3/8-16X5-IN) | |
| 35. | 1W-4357 | [1] | PLUG | |
| 36. | 7C-1126 | [1] | VALVE (CHECK) | |
| 37. | 8T-2188 | [1] | SEAL-QUAD RING | |
| 40. | 8C-5230 | [1] | SEAL-O-RING | |
| 41. | 3B-1915 | [14] | BOLT (3/8-16X1.375-IN) |
#SEBP43950519
122-4590: FILTER GP-PRIMARY FUEL
122-4590 FILTER GP-PRIMARY FUEL (CHG -00 THRU -04, -04D1)
PRIMARY FUEL ACCESSORY MODULE, RH WATER LINES
PRIMARY FUEL ACCESSORY MODULE, RH WATER LINES
For full view, you need register
Parts for your C280-8 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-4971 | [1] | SPACER (0.406X1X1-IN THK) | |
| 3. | 4W-5421 J | [1] | FILTER GP-PRIMARY FUEL | |
| 3A. | 4W-2609 | [2] | FILTER ELEMENT-FUEL | |
| 3B. | 2H-4145 | [2] | SEAL-O-RING | |
| 3C. | 8J-6775 | [2] | SEAL-THREAD | |
| 3D. | 5H-6005 | [2] | SEAL-O-RING | |
| 4. | 5R-8798 I | [1] | HOSE AS | |
| 5. | 7C-6289 | [1] | BRACKET | |
| 6. | 7C-6290 | [1] | BRACKET AS | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 7. | 7C-6400 B | [1] | TUBE AS | |
| 8. | 133-5212 I | [1] | HOSE AS | |
| 9. | 030-7967 B | [1] | ELBOW | |
| 10. | 030-7975 | [3] | ELBOW | |
| 11. | 031-8759 | [2] | CONNECTOR | |
| 12. | 068-4152 | [1] | UNION-FLARED | |
| 13. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 14. | 0S-1585 | [5] | BOLT (1/2-13X1.5-IN) | |
| 15. | 0S-1591 | [1] | BOLT (3/8-16X1.5-IN) | |
| 16. | 0S-1595 | [1] | BOLT (1/2-13X1.25-IN) | |
| 17. | 1F-7958 | [4] | NUT-FULL (1/2-13-THD) | |
| 18. | 3V-3308 | [4] | WASHER-HARD (10.2X20.5X2.5-MM THK) | |
| 19. | 5P-7815 | [2] | SEAL-O-RING | |
| 20. | 5P-8245 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 5P-2369 | [1] | CLIP (LOOP) | |
| 22. | 8S-0023 | [1] | CLIP (SLOT) | |
| 23. | 8S-0024 | [1] | CLIP (TAB) | |
| 24. | 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9Y-6898 J | [1] | KIT-FUEL FILTER | ||
| (INCLUDES ELEMENT AS-FUEL, SEAL-O-RINGS, SEAL-THREAD, & SPRING) | ||||
| B | USE AS REQUIRED | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
