OPERATOR STATION
CONTROL GP-HYDRAULICOPERATOR STATION
CONTROL GP-HYDRAULIC#SEBP44041040
338-5688: CONTROL AR-HYDRAULIC
338-5688 CONTROL AR-HYDRAULIC
S/N B9E1-UP
FOR USE WITH CANADIAN AR
AN ATTACHMENT
S/N B9E1-UP
FOR USE WITH CANADIAN AR
AN ATTACHMENT
For full view, you need register
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS#SEBP44041041
349-3054: CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 299-0874 Y | [1] | CONTROL GP-ELECTROHYDRAULIC | ||
| 231-1518 Y | [1] | LINES GP-RIPPER | ||
| 248-6169 Y | [1] | VALVE GP-BANK 4 (FRONT FRAME, REAR) | ||
| 248-6168 Y | [1] | VALVE GP-BANK 5 (FRONT FRAME) | ||
| 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | ||
| 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44041042
349-3055: CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 299-0874 Y | [1] | CONTROL GP-ELECTROHYDRAULIC | ||
| 309-6989 Y | [1] | LINES GP-HYDRAULIC (SCARIFIER) | ||
| 249-7298 Y | [1] | VALVE GP-BANK 3 (FRONT FRAME, REAR) | ||
| 249-7295 Y | [1] | VALVE GP-BANK 6 (FRONT FRAME) | ||
| 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | ||
| 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44041043
349-3057: CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 299-0876 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (FRONT LIFT, RIPPER) | ||
| 231-1520 Y | [1] | LINES GP-HYDRAULIC (FRONT LIFT) | ||
| 231-1518 Y | [1] | LINES GP-RIPPER | ||
| 248-6169 Y | [1] | VALVE GP-BANK 4 (FRONT FRAME, REAR) | ||
| 249-7294 Y | [1] | VALVE GP-BANK 6 (FRONT FRAME) | ||
| 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | ||
| 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44041044
349-3058: CONTROL AR-HYDRAULIC
349-3058 CONTROL AR-HYDRAULIC -FRONT LIFT, WING MAST, WING TILT
S/N B9E1-UP
AN ATTACHMENT
S/N B9E1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 233-3147 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (WITH AUXILIARY LEVER) | ||
| 250-9259 Y | [1] | ELECTRONICS GP-IMPLEMENT (IMPLEMENT 2) | ||
| 231-1520 Y | [1] | LINES GP-HYDRAULIC (FRONT LIFT) | ||
| 249-7299 Y | [1] | VALVE GP-BANK 5 (FRONT FRAME, REAR) | ||
| 249-7294 Y | [1] | VALVE GP-BANK 6 (FRONT FRAME) | ||
| 238-8828 Y | [1] | WIRING GP-ELECTRONIC CONTROL (HYDRAULIC IMPLEMENT) | ||
| 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | ||
| 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44041045
349-3059: CONTROL AR-HYDRAULIC
349-3059 CONTROL AR-HYDRAULIC -DOZER ANGLE, FRONT LIFT, RIPPER
S/N B9E1-UP
AN ATTACHMENT
S/N B9E1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 238-8756 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (WITHOUT AUXILIARY LEVER) | ||
| 299-0874 Y | [1] | CONTROL GP-ELECTROHYDRAULIC | ||
| 250-9259 Y | [1] | ELECTRONICS GP-IMPLEMENT (IMPLEMENT 2) | ||
| 231-1520 Y | [1] | LINES GP-HYDRAULIC (FRONT LIFT) | ||
| 231-1593 Y | [1] | LINES GP-HYDRAULIC (DOZER ANGLE, SNOW PLOW) | ||
| 231-1518 Y | [1] | LINES GP-RIPPER | ||
| 248-6169 Y | [1] | VALVE GP-BANK 4 (FRONT FRAME, REAR) | ||
| 249-5328 Y | [1] | VALVE GP-BANK 7 (FRONT FRAME) | ||
| 238-8828 Y | [1] | WIRING GP-ELECTRONIC CONTROL (HYDRAULIC IMPLEMENT) | ||
| 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | ||
| 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44041046
349-3060: CONTROL AR-HYDRAULIC
349-3060 CONTROL AR-HYDRAULIC -FRONT LIFT, RIPPER, WING MAST, WING TILT FLOAT
S/N B9E1-UP
AN ATTACHMENT
S/N B9E1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 233-3147 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (WITH AUXILIARY LEVER) | ||
| 299-0874 Y | [1] | CONTROL GP-ELECTROHYDRAULIC | ||
| 250-9259 Y | [1] | ELECTRONICS GP-IMPLEMENT (IMPLEMENT 2) | ||
| 231-1520 Y | [1] | LINES GP-HYDRAULIC (FRONT LIFT) | ||
| 231-1518 Y | [1] | LINES GP-RIPPER | ||
| 249-7294 Y | [1] | VALVE GP-BANK 6 (FRONT FRAME) | ||
| 291-9517 Y | [1] | VALVE GP-BANK 6 (FRONT FRAME, REAR) | ||
| 238-8828 Y | [1] | WIRING GP-ELECTRONIC CONTROL (HYDRAULIC IMPLEMENT) | ||
| 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | ||
| 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44041047
349-3061: CONTROL AR-HYDRAULIC
349-3061 CONTROL AR-HYDRAULIC -DOZER ANGLE, FRONT LIFT, RIPPER, WING MAST, WING TILT
S/N B9E1-UP
AN ATTACHMENT
S/N B9E1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 233-3147 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (WITH AUXILIARY LEVER) | ||
| 299-0874 Y | [1] | CONTROL GP-ELECTROHYDRAULIC | ||
| 250-9259 Y | [1] | ELECTRONICS GP-IMPLEMENT (IMPLEMENT 2) | ||
| 231-1520 Y | [1] | LINES GP-HYDRAULIC (FRONT LIFT) | ||
| 231-1593 Y | [1] | LINES GP-HYDRAULIC (DOZER ANGLE, SNOW PLOW) | ||
| 231-1518 Y | [1] | LINES GP-RIPPER | ||
| 249-5330 Y | [1] | VALVE GP-BANK 6 (FRONT FRAME, REAR) | ||
| 249-5328 Y | [1] | VALVE GP-BANK 7 (FRONT FRAME) | ||
| 238-8828 Y | [1] | WIRING GP-ELECTRONIC CONTROL (HYDRAULIC IMPLEMENT) | ||
| 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | ||
| 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44041048
349-3062: CONTROL AR-HYDRAULIC
349-3062 CONTROL AR-HYDRAULIC -DOZER ANGLE, FRONT LIFT, RIPPER, WING MAST, WING TILT FLOAT
S/N B9E1-UP
AN ATTACHMENT
S/N B9E1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 233-3147 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (WITH AUXILIARY LEVER) | ||
| 299-0874 Y | [1] | CONTROL GP-ELECTROHYDRAULIC | ||
| 250-9259 Y | [1] | ELECTRONICS GP-IMPLEMENT (IMPLEMENT 2) | ||
| 231-1520 Y | [1] | LINES GP-HYDRAULIC (FRONT LIFT) | ||
| 231-1593 Y | [1] | LINES GP-HYDRAULIC (DOZER ANGLE, SNOW PLOW) | ||
| 231-1518 Y | [1] | LINES GP-RIPPER | ||
| 291-9517 Y | [1] | VALVE GP-BANK 6 (FRONT FRAME, REAR) | ||
| 249-5328 Y | [1] | VALVE GP-BANK 7 (FRONT FRAME) | ||
| 238-8828 Y | [1] | WIRING GP-ELECTRONIC CONTROL (HYDRAULIC IMPLEMENT) | ||
| 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | ||
| 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44041049
349-3063: CONTROL AR-HYDRAULIC
349-3063 CONTROL AR-HYDRAULIC -DOZER ANGLE, FRONT LIFT, RIPPER, WING MAST, WING TILT
S/N B9E1-UP
AN ATTACHMENT
S/N B9E1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 233-3147 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (WITH AUXILIARY LEVER) | ||
| 299-0874 Y | [1] | CONTROL GP-ELECTROHYDRAULIC | ||
| 250-9259 Y | [1] | ELECTRONICS GP-IMPLEMENT (IMPLEMENT 2) | ||
| 231-1520 Y | [1] | LINES GP-HYDRAULIC (FRONT LIFT) | ||
| 231-1536 Y | [1] | LINES GP-HYDRAULIC (DOZER ANGLE, SNOW PLOW) | ||
| 231-1518 Y | [1] | LINES GP-RIPPER | ||
| 249-5330 Y | [1] | VALVE GP-BANK 6 (FRONT FRAME, REAR) | ||
| 249-5329 Y | [1] | VALVE GP-BANK 8 (FRONT FRAME) | ||
| 238-8828 Y | [1] | WIRING GP-ELECTRONIC CONTROL (HYDRAULIC IMPLEMENT) | ||
| 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | ||
| 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
OPERATOR STATION
CONTROL GP-HYDRAULIC
Special Instruction
Installation and Removal of the Detent in the Joystick Control for the Steering in M-Series Motor Graders {3168, 4343, 5063, 5705}
Installation and Removal of the Detent in the Joystick Control for the Steering in M-Series Motor Graders {3168, 4343, 5063, 5705}
Installation and Removal of the Detent in the Joystick Control for the Steering in M-Series Motor Graders {3168, 4343, 5063, 5705}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 360-2987 CONTROL GROUP - JOYSTICK ON CERTAIN 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 360-2987 CONTROL GROUP - JOYSTICK ON CERTAIN 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 360-2987 CONTROL GROUP - JOYSTICK ON CERTAIN 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Inadvertent Advanced Control Joystick (ACJ) Float Control Activation Occurs On Certain Motor Graders {3168, 4343, 5063, 5705, 7000}
Inadvertent Advanced Control Joystick (ACJ) Float Control Activation Occurs On Certain Motor Graders {3168, 4343, 5063, 5705, 7000}
Inadvertent Advanced Control Joystick (ACJ) Float Control Activation Occurs On Certain Motor Graders {3168, 4343, 5063, 5705, 7000}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 360-2987 CONTROL GROUP - JOYSTICK ON CERTAIN 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 360-2987 CONTROL GROUP - JOYSTICK ON CERTAIN 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 360-2987 CONTROL GROUP - JOYSTICK ON CERTAIN 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS
Service Letter-Asia
Service Letter-APD
Service Magazine
