355-4097 VALVE GP-BANK 1 S/N B9E1-UP PART OF 305-2924 LINES GP-STEERING AN ATTACHMENT 160M MOTOR GRADER

355-4097: VALVE GP-BANK 1

355-4097 VALVE GP-BANK 1
S/N B9E1-UP
PART OF 305-2924 LINES GP-STEERING
AN ATTACHMENT

Parts for your 160M MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	192-7507	[1]	SEAL-O-RING
2.	9T-4057	[5]	SEAL-O-RING
3.	8T-7877	[8]	SEAL-O-RING
4.	192-7510	[3]	SEAL-O-RING
5.	5L-4758	[1]	SEAL-O-RING
6.	192-7508	[2]	SEAL-O-RING
7.	301-5165	[1]	KIT-SEAL (BANK VALVE)
			(INCLUDES O-RINGS)
8.	301-5166	[1]	KIT-SEAL (BANK VALVE)
			(INCLUDES O-RINGS)
9.	376-1610	[1]	KIT-SHUTTLE VALVE
			(INCLUDES SHUTTLE VALVE GP)
10.	471-7935	[1]	VALVE GP-ACTUATOR (STEERING SIGNAL)
10A.	301-5167	[1]	KIT-SEAL (BANK VALVE)
			(INCLUDES FILTER & O-RINGS)
	1R-5396 M	[4]	BOLT (M6X1X35-MM)
	9T-4057	[3]	SEAL-O-RING
11.	301-4483	[2]	VALVE GP-RELIEF (STEERING PRESSURE)
12.	374-3604	[1]	ORIFICE

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	M		METRIC PART

249-7298: VALVE GP-BANK 3

VALVE GP-BANK 3

249-7298 VALVE GP-BANK 3 -REAR
S/N B9E1-UP
PART OF 242-5056, 242-5058, 242-5059, 242-5061, 242-6108, 242-6110, 309-9848, 349-3055, 422-1612 CONTROL AR-HYDRAULIC
AN ATTACHMENT

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	372-0918	[4]	SEAL-INTEGRAL
3.	245-9532 Y	[1]	VALVE GP-CONTROL (ARTICULATION)
4.	245-9533 Y	[1]	VALVE GP-CONTROL (BLADE LIFT)(LEFT)
4A.	245-9533 Y	[1]	VALVE GP-CONTROL (BLADE LIFT)(RIGHT)
5.	249-5636 M	[4]	STUD (M10X1.5X200-MM)
7.	273-1871	[1]	COVER
8.	292-2034 Y	[1]	MANIFOLD GP-VALVE (INLET)(FRONT)
9.	292-9221	[1]	PLUG AS
	292-9220	[1]	PLUG
	294-8055	[1]	SEAL-O-RING
10.	148-8411	[6]	PLUG AS
			(EACH INCLUDES)
	9S-4185	[1]	PLUG (3/4-16-THD)
	3K-0360	[1]	SEAL-O-RING
11.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4133 M	[4]	NUT (M10X1.5-THD)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

382-4418: VALVE GP-BANK 3

VALVE GP-BANK 3

382-4418 VALVE GP-BANK 3 -REAR
S/N B9E1-UP
PART OF 242-5056, 422-1612, 438-5421, 438-5423 CONTROL AR-HYDRAULIC
AN ATTACHMENT

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	249-5636 M	[4]	STUD (M10X1.5X200-MM)
2.	273-1871	[1]	COVER
3.	292-9221	[1]	PLUG AS
	292-9220	[1]	PLUG
	294-8055	[1]	SEAL-O-RING
4.	366-4700	[6]	PLUG AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	360-3693	[1]	PLUG (3/4-16-THD)
5.	371-6093 Y	[1]	VALVE GP-CONTROL (ARTICULATION)
6.	372-0918	[4]	SEAL-INTEGRAL
7.	380-1747 Y	[1]	VALVE GP-CONTROL (BLADE LIFT)(LEFT)
7A.	380-1747 Y	[1]	VALVE GP-CONTROL (BLADE LIFT)(RIGHT)
8.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
9.	388-4281 Y	[1]	MANIFOLD GP-VALVE (INLET)
10.	8T-4133 M	[4]	NUT (M10X1.5-THD)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

487-3027: VALVE GP-BANK 3

VALVE GP-BANK 3

487-3027 VALVE GP-BANK 3 -REAR
S/N B9E1-UP
PART OF 242-5056, 438-5421, 438-5423 CONTROL AR-HYDRAULIC
AN ATTACHMENT

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2S-4663	[6]	SEAL-O-RING
2.	3K-0360	[3]	SEAL-O-RING
3.	3T-0849 M	[12]	BOLT-SOCKET HEAD (M6X1X25-MM)
5.	4J-7533	[3]	SEAL-O-RING
6.	5B-9318	[3]	BALL
7.	6E-3007	[3]	SPRING
8.	8T-0267 M	[6]	BOLT-SOCKET HEAD (M6X1X12-MM)
9.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
10.	096-3831	[1]	ORIFICE
11.	106-3659	[1]	PISTON
12.	106-3660	[4]	PISTON
13.	212-4961	[3]	SPRING
14.	242-9264	[3]	PLUG-ORIFICE
15.	243-2965	[3]	SPOOL
16.	244-2579	[3]	PLUG
17.	249-5636 M	[4]	STUD (M10X1.5X200-MM)
18.	273-1871	[1]	COVER
19.	278-1799 Y	[2]	VALVE GP-SOLENOID (BLADE LIFT, RH)
19A.	278-1799 Y	[2]	VALVE GP-SOLENOID (BLADE LIFT, LH)
19B.	278-1799 Y	[2]	VALVE GP-SOLENOID (ARTICULATION)
20.	292-9221	[1]	PLUG AS
	292-9220	[1]	PLUG
	294-8055	[1]	SEAL-O-RING
21.	318-3052 H	[1]	VALVE GP-CHECK & RELIEF (BLADE LIFT, LH)
21A.	318-3052 H	[1]	VALVE GP-CHECK & RELIEF (BLADE LIFT, RH)
22.	318-3115 H	[1]	VALVE GP-CHECK (BLADE LIFT, RH)
	6V-6580 H	[1]	SEAL-O-RING
	9X-7745 H	[1]	SEAL-O-RING
	471-6294 H	[1]	SEAL-O-RING
22A.	318-3115 H	[1]	VALVE GP-CHECK (BLADE LIFT, LH)
	6V-6580 H	[1]	SEAL-O-RING
	9X-7745 H	[1]	SEAL-O-RING
	471-6294 H	[1]	SEAL-O-RING
23.	321-6908 H	[2]	VALVE GP-CHECK (ARTICULATION)
			(EACH INCLUDES)
	6V-6580 H	[1]	SEAL-O-RING
	9X-7745 H	[1]	SEAL-O-RING
	471-6294 H	[1]	SEAL-O-RING
24.	336-6718	[3]	LOCKNUT-FLANGE
25.	344-5675 M	[4]	NUT (M10X1.5-THD)
26.	361-3059 L	[1]	VALVE GP-RELIEF (PILOT OPERATED)
27.	366-4699	[3]	PLUG AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	360-3692	[1]	PLUG
28.	366-4700	[10]	PLUG AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	360-3693	[1]	PLUG (3/4-16-THD)
29.	367-6001	[4]	PLUG AS
			(EACH INCLUDES)
	4J-7533	[1]	SEAL-O-RING
	360-3675	[1]	PLUG (5/16-24-THD)
30.	367-6002	[4]	PLUG AS
			(EACH INCLUDES)
	3J-7354	[1]	SEAL-O-RING
	360-3677	[1]	PLUG (7/16-20-THD)
31.	367-6003	[3]	PLUG AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	360-3680	[1]	PLUG
32.	370-8976	[3]	COVER-SPRING
33.	370-8979	[3]	COVER-SPRING
35.	372-0918	[3]	SEAL-INTEGRAL
36.	380-0794	[12]	RETAINER
37.	380-0819	[1]	SPRING
38.	380-0820	[2]	SPRING
39.	380-0821	[2]	SPRING
42.	382-5518	[1]	MANIFOLD-INLET

	371-6093 AFJY	[1]	VALVE GP-CONTROL (ARTICULATION)
	372-0918 AFJ	[3]	SEAL-INTEGRAL
	488-7009 AFJY	[1]	VALVE GP-CONTROL (BLADE LIFT)

			AVAILABLE REPAIR KIT(S):
	471-4231 H	[2]	KIT-SEAL (BLADE LIFT)
			(ALSO INCLUDES BACKUP RINGS)
	133-5545 L	[1]	KIT-SEAL (PILOT OPERATED)
			(INCLUDES O-RING SEALS & BACKUP RINGS)
	A		NOT PART OF THIS GROUP
	F		NOT SHOWN
	H		KIT MARKED H SERVICES PART(S) MARKED H
	J		REFER TO "FIELD REPLACEMENT REFERENCE" CHART ON GRAPHIC
	L		KIT MARKED L SERVICES PART(S) MARKED L
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

248-6169: VALVE GP-BANK 4

VALVE GP-BANK 4

248-6169 VALVE GP-BANK 4 -REAR
S/N B9E1-UP
PART OF 242-5057, 242-5060, 242-5062, 309-7551, 309-7552, 349-3054, 349-3057, 349-3059, 349-8278, 365-3354, 365-3355, 365-5539, 365-5540 CONTROL AR-HYDRAULIC
AN ATTACHMENT

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
2.	372-0918	[5]	SEAL-INTEGRAL
3.	245-9532 Y	[1]	VALVE GP-CONTROL (ARTICULATION)
4.	245-9533 Y	[1]	VALVE GP-CONTROL (BLADE LIFT)(LEFT)
4A.	245-9533 Y	[1]	VALVE GP-CONTROL (BLADE LIFT)(RIGHT)
5.	245-9541 Y	[1]	VALVE GP-CONTROL (RIPPER)
7.	248-6175	[4]	ROD
8.	273-1871	[1]	COVER
9.	292-2034 Y	[1]	MANIFOLD GP-VALVE (INLET)(FRONT)
10.	292-9221	[1]	PLUG AS
	292-9220	[1]	PLUG
	294-8055	[1]	SEAL-O-RING
11.	148-8411	[8]	PLUG AS
			(EACH INCLUDES)
	9S-4185	[1]	PLUG (3/4-16-THD)
	3K-0360	[1]	SEAL-O-RING
12.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4133 M	[4]	NUT (M10X1.5-THD)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

382-4419: VALVE GP-BANK 4

VALVE GP-BANK 4

382-4419 VALVE GP-BANK 4 -REAR
S/N B9E991-UP
PART OF 365-3354, 365-3355, 365-5539, 365-5540 CONTROL AR-HYDRAULIC
AN ATTACHMENT

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	248-6175	[4]	ROD
2.	273-1871	[1]	COVER
3.	292-9221	[1]	PLUG AS
	292-9220	[1]	PLUG
	294-8055	[1]	SEAL-O-RING
4.	366-4700	[8]	PLUG AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	360-3693	[1]	PLUG (3/4-16-THD)
5.	371-6093 Y	[1]	VALVE GP-CONTROL (ARTICULATION)
6.	372-0918	[5]	SEAL-INTEGRAL
7.	380-1747 Y	[2]	VALVE GP-CONTROL (BLADE LIFT)
8.	382-3295 Y	[1]	VALVE GP-CONTROL (RIPPER)
9.	8T-4133 M	[4]	NUT (M10X1.5-THD)
10.	388-4281 Y	[1]	MANIFOLD GP-VALVE (INLET)
11.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

487-3028: VALVE GP-BANK 4

VALVE GP-BANK 4

487-3028 VALVE GP-BANK 4 -REAR
S/N B9E991-UP
PART OF 365-3354, 365-3355, 365-5539 CONTROL AR-HYDRAULIC
AN ATTACHMENT

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2S-4663	[8]	SEAL-O-RING
2.	3K-0360	[4]	SEAL-O-RING
3.	3T-0849 M	[16]	BOLT-SOCKET HEAD (M6X1X25-MM)
5.	4J-7533	[4]	SEAL-O-RING
6.	5B-9318	[4]	BALL
7.	6E-3007	[4]	SPRING
8.	8T-0267 M	[8]	BOLT-SOCKET HEAD (M6X1X12-MM)
9.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
10.	096-3831	[1]	ORIFICE
11.	106-3659	[2]	PISTON
12.	106-3660	[4]	PISTON
13.	212-4961	[4]	SPRING
14.	242-9264	[4]	PLUG-ORIFICE
15.	243-2965	[4]	SPOOL
16.	244-2579	[4]	PLUG
17.	273-1871	[1]	COVER
18.	278-1799 Y	[2]	VALVE GP-SOLENOID (RIPPER)
18A.	278-1799 Y	[2]	VALVE GP-SOLENOID (ARTICULATION)
18B.	278-1799 Y	[2]	VALVE GP-SOLENOID (BLADE LIFT, LH)
18C.	278-1799 Y	[2]	VALVE GP-SOLENOID (BLADE LIFT, RH)
19.	292-9221	[1]	PLUG AS
	292-9220	[1]	PLUG
	294-8055	[1]	SEAL-O-RING
20.	318-3040 L	[1]	VALVE GP-CHECK & RELIEF (RIPPER)
21.	318-3052 L	[1]	VALVE GP-CHECK & RELIEF (BLADE LIFT, LH)
21A.	318-3052 L	[1]	VALVE GP-CHECK & RELIEF (BLADE LIFT, RH)
22.	318-3115 L	[1]	VALVE GP-CHECK (BLADE LIFT, RH)
22A.	318-3115 L	[1]	VALVE GP-CHECK (BLADE LIFT, LH)
22B.	318-3115 L	[1]	VALVE GP-CHECK (RIPPER)
23.	321-6908 L	[2]	VALVE GP-CHECK (ARTICULATION)
			(EACH VALVE GP-CHECK INCLUDES)
	6V-6580 L	[1]	SEAL-O-RING
	9X-7745 L	[1]	SEAL-O-RING
	471-6294 L	[1]	SEAL-O-RING
24.	336-6718	[4]	LOCKNUT-FLANGE
25.	344-5675 M	[4]	NUT (M10X1.5-THD)
26.	361-3059 H	[1]	VALVE GP-RELIEF (LOAD SENSING)
27.	366-4699	[3]	PLUG AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	360-3692	[1]	PLUG
28.	366-4700	[12]	PLUG AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	360-3693	[1]	PLUG (3/4-16-THD)
29.	367-6001	[4]	PLUG AS
			(EACH INCLUDES)
	4J-7533	[1]	SEAL-O-RING
	360-3675	[1]	PLUG (5/16-24-THD)
30.	367-6002	[5]	PLUG AS
			(EACH INCLUDES)
	3J-7354	[1]	SEAL-O-RING
	360-3677	[1]	PLUG (7/16-20-THD)
31.	367-6003	[4]	PLUG AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	360-3680	[1]	PLUG
32.	370-8976	[4]	COVER-SPRING
33.	370-8979	[4]	COVER-SPRING
34.	372-0918	[3]	SEAL-INTEGRAL
35.	380-0794	[16]	RETAINER
36.	380-0819	[2]	SPRING
37.	380-0820	[2]	SPRING
38.	380-0821	[2]	SPRING
41.	382-5518	[1]	MANIFOLD-INLET
44.	248-6175	[4]	ROD

	371-6093 AFJY	[1]	VALVE GP-CONTROL (ARTICULATION)
	372-0918 AFJ	[4]	SEAL-INTEGRAL
	382-3295 AFJY	[1]	VALVE GP-CONTROL (RIPPER)
	488-7009 AFJY	[1]	VALVE GP-CONTROL (BLADE LIFT)

			AVAILABLE REPAIR KIT(S):
	133-5545 H	[1]	KIT-SEAL (LOAD SENSING)
			(INCLUDES O-RING SEALS & BACKUP RINGS)
	471-4231 L	[1]	KIT-SEAL (ARTICULATION)
			(ALSO INCLUDES BACKUP RINGS)
	A		NOT PART OF THIS GROUP
	F		NOT SHOWN
	H		KIT MARKED H SERVICES PART(S) MARKED H
	J		REFER TO "FIELD REPLACEMENT REFERENCE" CHART ON GRAPHIC
	L		KIT MARKED L SERVICES PART(S) MARKED L
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

248-6168: VALVE GP-BANK 5

VALVE GP-BANK 5

248-6168 VALVE GP-BANK 5 -FRONT FRAME
S/N B9E1-UP
PART OF 242-5056, 242-5057, 242-6109, 349-3054, 365-5539, 422-1612 CONTROL AR-HYDRAULIC
AN ATTACHMENT

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
2.	372-0918	[6]	SEAL-INTEGRAL
3.	245-9534 Y	[1]	VALVE GP-CONTROL (BLADE TIP)
4.	245-9535 Y	[1]	VALVE GP-CONTROL (BLADE CENTERSHIFT)
5.	245-9536 Y	[1]	VALVE GP-CONTROL (BLADE SIDESHIFT)
6.	245-9537 Y	[1]	VALVE GP-CONTROL (CIRCLE DRIVE)
7.	245-9539 Y	[1]	VALVE GP-CONTROL (WHEEL LEAN)
9.	248-6174	[4]	ROD
10.	273-1871	[1]	COVER
11.	292-2033 Y	[1]	MANIFOLD GP-VALVE (INLET)(FRONT)
12.	292-9221	[1]	PLUG AS
	292-9220	[1]	PLUG
	294-8055	[1]	SEAL-O-RING
13.	148-8411	[10]	PLUG AS
			(EACH INCLUDES)
	9S-4185	[1]	PLUG (3/4-16-THD)
	3K-0360	[1]	SEAL-O-RING
14.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
15.	8T-4133 M	[4]	NUT (M10X1.5-THD)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

249-7299: VALVE GP-BANK 5

VALVE GP-BANK 5

249-7299 VALVE GP-BANK 5 -REAR
S/N B9E1-UP
PART OF 242-5063, 242-5064, 242-6111, 242-6146, 309-9859, 309-9873, 349-3058, 349-8279 CONTROL AR-HYDRAULIC
AN ATTACHMENT

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
2.	372-0918	[6]	SEAL-INTEGRAL
3.	245-9532 Y	[1]	VALVE GP-CONTROL (ARTICULATION)
4.	245-9533 Y	[1]	VALVE GP-CONTROL (BLADE LIFT)(LEFT)
4A.	245-9533 Y	[1]	VALVE GP-CONTROL (BLADE LIFT)(RIGHT)
5.	245-9542 Y	[1]	VALVE GP-CONTROL (WING TILT)
6.	245-9543 Y	[1]	VALVE GP-CONTROL (WING LIFT)
7.	248-6174	[4]	ROD
9.	273-1871	[1]	COVER
10.	292-2034 Y	[1]	MANIFOLD GP-VALVE (INLET)(FRONT)
11.	292-9221	[1]	PLUG AS
	292-9220	[1]	PLUG
	294-8055	[1]	SEAL-O-RING
12.	148-8411	[10]	PLUG AS
			(EACH INCLUDES)
	9S-4185	[1]	PLUG (3/4-16-THD)
	3K-0360	[1]	SEAL-O-RING
13.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
14.	8T-4133 M	[4]	NUT (M10X1.5-THD)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

382-4404: VALVE GP-BANK 5

VALVE GP-BANK 5

382-4404 VALVE GP-BANK 5 -FRONT
S/N B9E1-UP
PART OF 242-5056, 365-5539, 422-1612 CONTROL AR-HYDRAULIC
AN ATTACHMENT

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	248-6174	[4]	ROD
2.	273-1871	[1]	COVER
3.	292-9221	[1]	PLUG AS
	292-9220	[1]	PLUG
	294-8055	[1]	SEAL-O-RING
4.	366-4700	[10]	PLUG AS
			(EACH INCLUDES)
	360-3693	[1]	PLUG (3/4-16-THD)
	3K-0360	[1]	SEAL-O-RING
5.	372-0918	[6]	SEAL-INTEGRAL
6.	382-3290 Y	[1]	VALVE GP-CONTROL (BLADE TIP)
7.	382-3294 Y	[1]	VALVE GP-CONTROL (CENTERSHIFT)
8.	382-3301 Y	[1]	VALVE GP-CONTROL (BLADE TIP)(SIDE)
9.	382-3305 Y	[1]	VALVE GP-CONTROL (WHEEL LEAN)
10.	382-3316 Y	[1]	VALVE GP-CONTROL (CIRCLE)
11.	8T-4133 M	[4]	NUT (M10X1.5-THD)
12.	388-4280 Y	[1]	MANIFOLD GP-VALVE (INLET)
13.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

VALVE GP-BANK

Special Instruction

Procedure to Rework the Motor and the Control Valve for the Circle Drive on Certain Motor Graders{5051, 5082}
Procedure to Rework the Motor and the Control Valve for the Circle Drive on Certain Motor Graders{5051, 5082}

Installation of Additional Hydraulic Valves on Certain M-Series Motor Graders {5051}
Installation of Additional Hydraulic Valves on Certain M-Series Motor Graders {5051}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS

Technical Information Bulletin

O-Ring Seal for the Check Valves in the Implement <BR>Control Valve May Leak on Certain Motor Graders{5051}
O-Ring Seal for the Check Valves in the Implement
Control Valve May Leak on Certain Motor Graders{5051}

<NOBR>380-1747</NOBR> Control Valve Gp Can Cause Cylinder Voiding When Using Float to Lower the Blade on Certain Motor Graders {5051}
380-1747 Control Valve Gp Can Cause Cylinder Voiding When Using Float to Lower the Blade on Certain Motor Graders {5051}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS

Testing and Adjusting

Bank Valve (Grade Control) - Calibrate
AccuGrade® GPS v11 for CD700

Bank Valve (Grade Control) - Calibrate
AccuGrade^® (CD610)

Troubleshooting

Hydraulic System
AccuGrade^® (CD610)

Disassembly and Assembly

Bank Valve - Disassemble - Rear Frame
160M Motor Grader Machine Systems

Bank Valve - Assemble - Rear Frame
160M Motor Grader Machine Systems

Bank Valve - Disassemble - Front Frame
160M Motor Grader Machine Systems

Bank Valve - Assemble - Front Frame
160M Motor Grader Machine Systems

Bank Valve - Remove - Rear Frame
160M Motor Grader Machine Systems

Bank Valve - Install - Rear Frame
160M Motor Grader Machine Systems

Bank Valve - Remove - Front Frame
160M Motor Grader Machine Systems

Bank Valve - Install - Front Frame
160M Motor Grader Machine Systems

Service Magazine

New Torque Procedure for Motor Grader Bank Valve Group {5051}
2008/06/09

A New Integral Seal for the Control Valve Is Now Used on Certain M and M Series 2 Motor Graders {5051}
2011/12/16

A New Rework Procedure Improves Gerotor Motor and Control Valve for the Circle Drive on Certain Motor Graders {5051, 5082}
2012/07/11

An Improved Steering Actuator Valve is Available for M and M Series 2 Motor Graders {5051}
2013/05/03

Caterpillar Parts SIS Catalog 160M :

Truck sale:

207,000

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

173,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

209,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

204,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

217,000

Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.