357-9199 DOOR GP-CAB -RH S/N B9E1-UP PART OF 381-7048, 381-7049 ROPS GP AN ATTACHMENT 160M MOTOR GRADER

OPERATOR STATION

DOOR GP

0. 357-9199 DOOR GP-CA
1. 357-9200 DOOR GP-CA

DUCT GP

2. 244-2701 DUCT & FIL

FAN GP

3. 170-5334 FAN GP-CIR
4. 170-5334 FAN GP-CIR
5. 170-5334 FAN GP-CIR
6. 233-3137 FAN GP-CIR
7. 233-3137 FAN GP-CIR
8. 398-0720 FAN GP-CIR

HEATER GP

9. 271-7302 HEATER & M
0. INFORMATION

MOTOR GRADER 160M MOTOR GRADER B9E
160M Motor Grader B9E00001-UP (MACHINE) POWERED BY C9 Engine SEBP4404 160M B9E (2007)

OPERATOR STATION

DOOR GP

299-1021 LEVER GP-CAB DOOR

#SEBP44041380

357-9199: DOOR GP-CAB

DOOR GP-CAB

357-9199 DOOR GP-CAB -RH
S/N B9E1-UP
PART OF 381-7048, 381-7049 ROPS GP
AN ATTACHMENT

i04562518 SEBP4404

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	172-8591 M	[3]	NUT-CLIP (M6X1-THD)
2.	6V-7636	[2]	PIN AS-SPRING
3.	184-0983 M	[1]	NUT-HEX FLANGE (M12X1.75-THD)
4.	252-1862 J	[1]	HANDLE AS-PULL
5.	252-1863	[1]	GASKET
6.	261-1731	[1]	BOOT
7.	269-2890	[1]	CLEVIS
8.	269-2892	[1]	PIN
9.	269-2893	[1]	CLIP
10.	272-1623	[1]	BELLCRANK AS
11.	285-3692	[1]	SPACER-SPECIAL
12.	295-6405	[1]	LATCH AS (RH)
13.	507-2767	[1]	STRIKER AS
14.	299-1020	[1]	LEVER AS
	8T-7971	[2]	WASHER-HARD (13.5X25.5X5-MM THK)
	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
	114-6658	[2]	WASHER (6.5X17X1-MM THK)
	115-9345	[1]	KNOB-CONTROL
	299-1024	[1]	LEVER
	299-1441	[1]	SPRING
	299-1442	[1]	SPRING
15.	299-1660	[1]	CABLE AS
	7S-9930	[2]	RING-RETAINING
	159-0052	[2]	PIN-CLEVIS
16.	328-4985	[1]	LATCH AS-DOOR (RH)
17.	357-0728	[1]	HARNESS AS-WINDOW WIPER (LH)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(9-CM)
	8T-8737	[2]	PLUG-SEAL
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	144-0195 E		HOSE (119-CM)
	9X-3401	[5]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[5]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	297-4169	[2]	GROMMET
	329-3734 B		TAPE-ELECTRICAL
18.	357-9181	[1]	DOOR AS (RH)
	7Y-9096 M	[2]	SCREW-TRUSS HEAD (M6X1X6-MM)
	9X-2042 M	[3]	SCREW-TRUSS HEAD (M6X1X12-MM)
	308-2903 M	[3]	NUT-WELD (M6X1-THD)
19.	357-9187	[1]	HANDLE AS-PULL
20.	357-9188	[1]	PLATE
21.	357-9190	[1]	BRACKET AS
22.	357-9191	[1]	BUMPER
23.	357-9236	[1]	GLASS (DOOR)
24.	357-9260	[1]	COVER (WIPER-RH)
25.	357-9261	[1]	COVER-LATCH
26.	357-9652 Y	[1]	WIPER GP-WINDOW (DOOR, RH)
27.	357-9755	[1]	LINKAGE
28.	361-0421	[1]	COVER
29.	372-7541	[1]	BRACKET AS
	8T-3612 M	[1]	NUT-WELD (M8X1.25-THD)
30.	376-4793	[1]	HANDLE AS-PULL
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
31.	380-6158	[2]	HINGE AS
			(EACH INCLUDES)
31A.	372-5042	[2]	BUSHING
32.	4E-1384	[1]	BUMPER-CONICAL
33.	114-6658	[4]	WASHER (6.5X17X1-MM THK)
34.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
35.	5C-7261 M	[1]	NUT (M8X1.25-THD)
36.	6D-4244	[2]	CLIP (LOOP)
37.	8T-4000 M	[2]	SCREW-WASHER HEAD (M8X1.25X4.8-MM)
38.	7X-7729	[12]	WASHER (11X25X3-MM THK)
39.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
40.	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
41.	9X-2043 M	[13]	SCREW-TRUSS HEAD (M6X1X14-MM)
42.	9X-2044 M	[4]	SCREW-TRUSS HEAD (M6X1X16-MM)
43.	9X-2125 M	[10]	BOLT-LOCKING (M10X1.5X25-MM)
44.	331-9731 E		SEAL (4-CM)
45.	353-7114 E		SEAL (440-CM)
46.	367-2761 E		SEAL (500-CM)
47.	108-5471	[1]	CLEVIS
48.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
49.	6V-8185	[1]	NUT (1/4-20-THD)
50.	3S-2093	[1]	STRAP-CABLE
51.	7X-0605	[1]	WASHER-HARD (13X28X1.6-MM THK)
52.	242-5206	[4]	SPACER (6.4X12.5X0.76-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	J		REQUIRES CORPORATE KEY
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP44041381

357-9200: DOOR GP-CAB

DOOR GP-CAB

357-9200 DOOR GP-CAB -LH
S/N B9E1-UP
PART OF 381-7048, 381-7049 ROPS GP
AN ATTACHMENT

i04562525 SEBP4404

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	172-8591 M	[3]	NUT-CLIP (M6X1-THD)
2.	6V-7636	[2]	PIN AS-SPRING
3.	184-0983 M	[1]	NUT-HEX FLANGE (M12X1.75-THD)
4.	252-1862 J	[1]	HANDLE AS-PULL
5.	252-1863	[1]	GASKET
6.	261-1731	[1]	BOOT
7.	269-2890	[1]	CLEVIS
8.	269-2892	[1]	PIN
9.	269-2893	[1]	CLIP
10.	272-1623	[1]	BELLCRANK AS
11.	285-3692	[1]	SPACER-SPECIAL
12.	295-6406	[1]	LATCH AS (LH)
13.	507-2767	[1]	STRIKER AS
14.	299-1021 Y	[1]	LEVER GP-CAB DOOR
15.	299-1660	[1]	CABLE AS
	7S-9930	[2]	RING-RETAINING
	159-0052	[2]	PIN-CLEVIS
16.	328-4984	[1]	LATCH AS-DOOR (LH)
17.	357-0728	[1]	HARNESS AS-WINDOW WIPER (LH)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(9-CM)
	8T-8737	[2]	PLUG-SEAL
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	144-0195 E		HOSE (134-CM)
	9X-3401	[5]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[5]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	297-4169	[2]	GROMMET
	329-3734 B		TAPE-ELECTRICAL
18.	357-9182	[1]	DOOR AS (LH)
	308-2903 M	[3]	NUT-WELD (M6X1-THD)
	7Y-9096 M	[2]	SCREW-TRUSS HEAD (M6X1X6-MM)
	9X-2042 M	[3]	SCREW-TRUSS HEAD (M6X1X12-MM)
19.	357-9187	[1]	HANDLE AS-PULL
20.	357-9188	[1]	PLATE
21.	357-9190	[1]	BRACKET AS
22.	357-9191	[1]	BUMPER
23.	357-9236	[1]	GLASS (DOOR)
24.	357-9257	[1]	COVER (WIPER-LH)
25.	357-9258	[1]	COVER-LATCH
26.	357-9653 Y	[1]	WIPER GP-WINDOW (DOOR, LH)
27.	357-9755	[1]	LINKAGE
28.	361-0421	[1]	COVER
29.	372-7541	[1]	BRACKET AS
	8T-3612 M	[1]	NUT-WELD (M8X1.25-THD)
30.	376-4794	[1]	HANDLE AS-PULL
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
31.	380-6158	[2]	HINGE AS
			(EACH INCLUDES)
31A.	372-5042	[2]	BUSHING
32.	4E-1384	[1]	BUMPER-CONICAL
33.	114-6658	[4]	WASHER (6.5X17X1-MM THK)
34.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
35.	5C-7261 M	[1]	NUT (M8X1.25-THD)
36.	6D-4244	[2]	CLIP (LOOP)
37.	8T-4000 M	[2]	SCREW-WASHER HEAD (M8X1.25X4.8-MM)
38.	7X-7729	[12]	WASHER (11X25X3-MM THK)
39.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
40.	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
41.	9X-2043 M	[13]	SCREW-TRUSS HEAD (M6X1X14-MM)
42.	9X-2044 M	[4]	SCREW-TRUSS HEAD (M6X1X16-MM)
43.	9X-2125 M	[10]	BOLT-LOCKING (M10X1.5X25-MM)
44.	331-9731 E		SEAL (4-CM)
45.	353-7114 E		SEAL (440-CM)
46.	367-2761 E		SEAL (500-CM)
47.	108-5471	[1]	CLEVIS
48.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
49.	6V-8185	[1]	NUT (1/4-20-THD)
50.	3S-2093	[1]	STRAP-CABLE
51.	7X-0605	[1]	WASHER-HARD (13X28X1.6-MM THK)
52.	242-5206	[4]	SPACER (6.4X12.5X0.76-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	J		REQUIRES CORPORATE KEY
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP44041382

244-2701: DUCT & FILTER GP-CAB AIR

DUCT & FILTER GP-CAB AIR

244-2701 DUCT & FILTER GP-CAB AIR
S/N B9E404-UP
PART OF 233-3149, 361-3133 AIR CONDITIONER GP, 233-3130 HEATER GP-CAB
ALSO AN ATTACHMENT

i02786270 SEBP4404

2442701 DUCT & FILTER GP-CAB AIR Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2R-2376	[2]	WASHER (7X16X0.8-MM THK)
2.	149-1912	[1]	FILTER ELEMENT-CAB AIR (CAB HEATER, AIR CONDITIONER)
			-OR-
	220-8800	[1]	FILTER ELEMENT-CAB AIR (ACTIVATED CHARCOAL)
3.	211-2660	[1]	FILTER ELEMENT-AIR (CAB HEATER, AIR CONDITIONER)
4.	297-4139	[1]	DUCT
5.	297-4140	[1]	DUCT
6.	525-4816	[1]	DUCT AS
	7K-4201	[2]	NUT-SPEED
7.	274-2385	[1]	COVER
8.	274-2392	[2]	SCREW-THUMB
9.	5P-4115	[1]	WASHER-HARD (7.2X19X2-MM THK)
10.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
11.	8T-0640 M	[1]	BOLT (M6X1X30-MM)
12.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
13.	126-5648 E		SEAL (70-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP44041383

170-5334: FAN GP-CIRCULATING

FAN GP-CIRCULATING

170-5334 FAN GP-CIRCULATING -FRONT DEFROSTER
S/N B9E1-UP
24-VOLT
PART OF 233-3137, 398-0720 FAN GP-CIRCULATING
Type 1
AN ATTACHMENT

i01680043 SEBP4404

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-2713	[1]	BOLT (1/4-20X1.75-IN)
2.	3D-8747	[1]	BRACKET
3.	383-7644	[1]	FAN AS (4-BLADE)
4.	3D-8749	[1]	GUARD
5.	3T-6774	[1]	GROMMET
6.	9X-9689	[1]	BASE-FAN
7.	135-1979	[1]	BRACKET
8.	170-5335 Y	[1]	MOTOR GP-ELECTRIC (24-VDC, CIRCULATING FAN)
9.	031-4155	[1]	LOCKNUT (5/16-18-THD)
10.	1M-1230	[2]	NUT-LOCKING (10-32-THD)
11.	2D-6235	[1]	LOCKNUT (1/4-20-THD)
12.	3D-8752	[1]	LOCKNUT (5/16-24-THD)
13.	4M-0061	[1]	BOLT (5/16-18X0.75-IN)
14.	5P-0537	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
15.	6G-5987	[1]	BRACKET
16.	7L-8316	[1]	SETSCREW-SOCKET (10-32X2.54-IN)
17.	7T-0582	[1]	BOLT
18.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
19.	9T-5241	[2]	WASHER (9.53X18X1-MM THK)
	Y		SEPARATE ILLUSTRATION

#SEBP44041384

170-5334: FAN GP-CIRCULATING

FAN GP-CIRCULATING

170-5334 FAN GP-CIRCULATING -FRONT DEFROSTER
S/N B9E1-UP
24-VOLT
PART OF 233-3137, 398-0720 FAN GP-CIRCULATING
Type 2
AN ATTACHMENT

i04912228 SEBP4404

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-2713	[1]	BOLT (1/4-20X1.75-IN)
2.	3D-8747	[1]	BRACKET
3.	383-7644	[1]	FAN AS (4-BLADE)
4.	3D-8749	[1]	GUARD
5.	3T-6774	[1]	GROMMET
6.	9X-9689	[1]	BASE-FAN
7.	135-1979	[1]	BRACKET
8.	386-9663 CY	[1]	MOTOR GP-ELECTRIC (24-VDC, CIRCULATING FAN)
9.	031-4155	[1]	LOCKNUT (5/16-18-THD)
10.	1M-1230	[2]	NUT-LOCKING (10-32-THD)
11.	2D-6235	[1]	LOCKNUT (1/4-20-THD)
12.	3D-8752	[1]	LOCKNUT (5/16-24-THD)
13.	4M-0061	[1]	BOLT (5/16-18X0.75-IN)
14.	5P-0537	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
15.	6G-5987	[1]	BRACKET
16.	7L-8316	[1]	SETSCREW-SOCKET (10-32X2.54-IN)
17.	7T-0582	[1]	BOLT
18.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
19.	9T-5241	[2]	WASHER (9.53X18X1-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP44041385

170-5334: FAN GP-CIRCULATING

FAN GP-CIRCULATING

170-5334 FAN GP-CIRCULATING -FRONT DEFROSTER
S/N B9E1-UP
24-VOLT
PART OF 233-3137, 398-0720 FAN GP-CIRCULATING
Type 3
AN ATTACHMENT

i05833497 SEBP4404

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-2713	[1]	BOLT (1/4-20X1.75-IN)
2.	3D-8747	[1]	BRACKET
3.	383-7644	[1]	FAN AS (4-BLADE)
4.	3D-8749	[1]	GUARD
5.	3T-6774	[1]	GROMMET
6.	9X-9689	[1]	BASE-FAN
7.	135-1979	[1]	BRACKET
8.	436-9180 CY	[1]	MOTOR GP-ELECTRIC (CIRCULATING FAN)
9.	031-4155	[1]	LOCKNUT (5/16-18-THD)
10.	1M-1230	[2]	NUT-LOCKING (10-32-THD)
11.	2D-6235	[1]	LOCKNUT (1/4-20-THD)
12.	3D-8752	[1]	LOCKNUT (5/16-24-THD)
13.	4M-0061	[1]	BOLT (5/16-18X0.75-IN)
14.	5P-0537	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
15.	6G-5987	[1]	BRACKET
16.	7L-8316	[1]	SETSCREW-SOCKET (10-32X2.54-IN)
17.	7T-0582	[1]	BOLT
18.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
19.	9T-5241	[2]	WASHER (9.53X18X1-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP44041386

233-3137: FAN GP-CIRCULATING

FAN GP-CIRCULATING

233-3137 FAN GP-CIRCULATING -DEFROSTER
S/N B9E1-UP
WITH SWITCH
PART OF 349-3050, 365-5559, 389-1907 OPTION AR-CAB, 242-9549 SNOW AR-MOTOR GRADER
AN ATTACHMENT

i02772939 SEBP4404

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7T-4003	[1]	RESISTOR
2.	170-5334 Y	[1]	FAN GP-CIRCULATING (FRONT DEFROSTER)
3.	367-5211	[1]	SWITCH AS-ROCKER (24-VOLT)(FAN BLOWER SPEED)
4.	325-9400	[1]	PLATE AS
5.	7X-2536 M	[2]	BOLT (M8X1.25X14-MM)
6.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
7.	9X-1046 M	[2]	SCREW (M4X0.7X18-MM)
8.	9X-2045 M	[4]	SCREW-TRUSS HEAD (M6X1X20-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP44041387

233-3137: FAN GP-CIRCULATING

FAN GP-CIRCULATING

233-3137 FAN GP-CIRCULATING -DEFROSTER
S/N B9E1-UP
WITH SWITCH
PART OF 420-1977 CAB AR, 365-5559, 389-1907 OPTION AR-CAB
AN ATTACHMENT

i05030163 SEBP4404

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7T-4003	[1]	RESISTOR
2.	170-5334 Y	[1]	FAN GP-CIRCULATING (FRONT DEFROSTER)
3.	367-5211	[1]	SWITCH AS-ROCKER (24-VOLT)(FAN BLOWER SPEED)
4.	154-8079 C	[2]	NUT-RETAINER
5.	9X-2045 M	[4]	SCREW-TRUSS HEAD (M6X1X20-MM)
6.	213-7315 CM	[2]	SCREW-TRUSS HEAD (M4X0.7X25-MM)
7.	5P-8441	[1]	GROMMET
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP44041388

398-0720: FAN GP-CIRCULATING

FAN GP-CIRCULATING

398-0720 FAN GP-CIRCULATING -DEFROSTER
S/N B9E1-UP
WITH SWITCH
PART OF 349-3050 OPTION AR-CAB
AN ATTACHMENT

i05019710 SEBP4404

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7T-4003	[1]	RESISTOR
2.	170-5334 Y	[1]	FAN GP-CIRCULATING (FRONT DEFROSTER)
3.	367-5211	[1]	SWITCH AS-ROCKER (24-VOLT)(FAN BLOWER SPEED)
4.	325-9400	[1]	PLATE AS
5.	7X-2536 M	[2]	BOLT (M8X1.25X14-MM)
6.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
7.	9X-1046 M	[2]	SCREW (M4X0.7X18-MM)
8.	9X-2045 M	[4]	SCREW-TRUSS HEAD (M6X1X20-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP44041389

271-7302: HEATER & MTG GP-CAB

HEATER & MTG GP-CAB

271-7302 HEATER & MTG GP-CAB
S/N B9E1-UP
PART OF 233-3130 HEATER GP-CAB
AN ATTACHMENT

i02786774 SEBP4404

2717302 HEATER & MTG GP-CAB Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	244-2699 Y	[1]	HEATER GP-CAB
2.	249-0410	[2]	GASKET
3.	249-0411	[1]	GASKET
4.	249-0937	[1]	DUCT
5.	265-7454	[1]	GASKET
6.	266-3753	[2]	SPACER (11X25X39.8-MM)
7.	118-5619	[2]	SCREW-FLAT HEAD (6-20X1-IN)
8.	145-6669	[2]	SCREW-SELF-TAPPING (10X0.75-IN)
9.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4172 M	[2]	BOLT (M10X1.5X80-MM)
11.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
12.	5P-5637 D		SEAL (0.5-M)
13.	5P-5927 D		SEAL (0.4-M)
13A.	5P-5927 D		SEAL (0.3-M EACH)
13B.	5P-5927 D		SEAL (0.5-M)
14.	5P-5643 D		SEAL (0.5-M)
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

OPERATOR STATION

DOOR GP

Operation and Maintenance Manual

Alternate Exit
160M Motor Grader

Special Instruction

Replacing Bonded Windows {7310}
Replacing Bonded Windows {7310}

Improved Door Seal and Wiper Motor Covers{7308}
Improved Door Seal and Wiper Motor Covers{7308}

Installation of Zip-In Window Door Kits on Certain M-Series and M-Series 2 Motor Graders{7305, 7308, 7310}
Installation of Zip-In Window Door Kits on Certain M-Series and M-Series 2 Motor Graders{7305, 7308, 7310}

Installation of Window Seals on Caterpillar Products With a Cab{7308}
Installation of Window Seals on Caterpillar Products With a Cab{7308}

Retrofitting a Right Hand Stamped Door with Heated Glass on Certain M Series, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7308, 7310}
Retrofitting a Right Hand Stamped Door with Heated Glass on Certain M Series, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7308, 7310}

Retrofit for the Heated Glass Wiring on Certain M, M-Series 2, and M-Series 3 Motor Graders with Pre-Phase I Cabs {1408, 7305, 7308, 7310}
Retrofit for the Heated Glass Wiring on Certain M, M-Series 2, and M-Series 3 Motor Graders with Pre-Phase I Cabs {1408, 7305, 7308, 7310}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING A BRACKET TO PREVENT INTERFERENCE BETWEEN THE CAB DOOR AND FUEL TANK ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A BRACKET TO PREVENT INTERFERENCE BETWEEN THE CAB DOOR AND FUEL TANK ON CERTAIN 140M AND 160M MOTOR GRADERS

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING VARIOUS CAB COMPONENTS ON 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING VARIOUS CAB COMPONENTS ON 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE DOOR SEALS AND VARIOUS CAB COMPONENTS ON CERTAIN 12M, 120M, 14M, 140M, 16M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DOOR SEALS AND VARIOUS CAB COMPONENTS ON CERTAIN 12M, 120M, 14M, 140M, 16M, AND 160M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE DOOR GLASS ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DOOR GLASS ON CERTAIN 12M, 12M 2, 14M, 16M, 120M, 120M 2, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CAB DOORS ON CERTIAN 120M, 120M 2, 12M, 12M 2, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CAB DOORS ON CERTIAN 120M, 120M 2, 12M, 12M 2, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Procedure for Eliminating the Interference Between the Step Mounting Bolts and the Door Seal{7254, 7308}
Procedure for Eliminating the Interference Between the Step Mounting Bolts and the Door Seal{7254, 7308}

Cab Door May Move Out of Adjustment on Certain Motor Graders {7308}
Cab Door May Move Out of Adjustment on Certain Motor Graders {7308}

Service Letter-China

Service Letter-Asia

Service Letter-APD

Service Magazine

New Latches are Now Available for Certain Motor Grader Doors {7308}
2009/02/09

Zip-In Window Door Kits Are Now Available on Certain M and M-Series 2 Motor Graders {7305, 7308, 7310}
2009/12/08

An Improved Door Assembly is Available for Certain M-Series Motor Graders {7308}
2010/05/06

Adjustment Procedure for the Cab Doors on Certain M-Series Motor Graders {7308}
2010/04/08

Heated Anti-Icing Glass is Now Available for Certain M and M Series 2 Motor Graders {1408, 7305, 7308, 7310}
2011/12/26

A New Bracket is Now Used on The Door Latch Assembly of Certain M, M Series 2, and M Series 3 Motor Graders {7308}
2015/07/28

Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}

Caterpillar Parts SIS Catalog 160M :

292-0309 DISPLAY GP-MONITOR

286-9124 DISPLAY GP-MONITOR

286-0134 DISPLAY GP-MONITOR

447-2229 DISPLAY GP-CAMERA

357-9200 DOOR GP-CAB

244-2701 DUCT & FILTER GP-CAB AIR

170-5334 FAN GP-CIRCULATING

233-3137 FAN GP-CIRCULATING

398-0720 FAN GP-CIRCULATING

Truck sale:

207,000

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

173,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

209,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

204,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

217,000

Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.