256-8768 SUSPENSION GP-SEAT -AIR S/N B9E1-UP 24-VOLT PART OF 238-6683, 421-1234 SEAT GP-SUSPENSION Type 2 AN ATTACHMENT 160M

OPERATOR STATION

SEAT GP

0. 256-8768 SUSPENSION

WASHER GP-WINDOW

1. 248-3164 TANK GP-WI
2. 325-9410 TANK GP-WI

CAB GP

3. 310-2054 TRIM GP-CA
4. 381-2494 TRIM GP-CA
5. 381-2494 TRIM GP-CA

WINDOW GP

6. 233-3113 WINDOW GP-
7. 233-3140 WINDOW GP-
8. 233-3286 WINDOW GP-
9. 260-6724 WINDOW GP-
0. INFORMATION

MOTOR GRADER 160M MOTOR GRADER B9E
160M Motor Grader B9E00001-UP (MACHINE) POWERED BY C9 Engine SEBP4404 160M B9E (2007)

OPERATOR STATION

SEAT GP

160-7165 SUSPENSION GP-SEAT

256-8768 SUSPENSION GP-SEAT

#SEBP44041490

256-8768: SUSPENSION GP-SEAT

SUSPENSION GP-SEAT

256-8768 SUSPENSION GP-SEAT -AIR
S/N B9E1-UP
24-VOLT
PART OF 238-6683, 421-1234 SEAT GP-SUSPENSION
Type 2
AN ATTACHMENT

i05353977 SEBP4404

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3P-9900	[5]	WASHER (10.5X30X3-MM THK)
2.	4B-4278	[2]	WASHER (10.2X20.5X1.6-MM THK)
3.	4V-8577	[12]	BEARING
5.	101-0003	[26]	FASTENER
6.	145-0326	[1]	FILM-INSTRUCTION (SEAT ADJUSTMENT)
7.	164-1234	[1]	PLATE
8.	169-7380	[1]	BOLT-SOCKET HEAD (3/8-16X0.375-IN)
10.	192-7752	[4]	SHAFT AS
11.	192-7755	[1]	HOUSING AS (LOWER)
12.	314-5274 C	[1]	SHAFT (INNER)
13.	192-7767	[1]	SCISSORS AS
14.	192-7783	[1]	TOGGLE AS (WIDE)
15.	192-7787	[1]	TOGGLE AS (NARROW)
16.	192-7790	[1]	HOUSING AS (UPPER)
17.	192-7795	[1]	BOOT
18.	433-5754	[1]	HARNESS AS-WIRING (SEAT AIR COMPRESSOR)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	5P-4571	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	097-7234	[2]	TERMINAL-BLADE (18-GA TO 22-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	1P-0810 B		TAPE-ELECTRICAL
	329-3734 B		TAPE-ELECTRICAL
19.	192-7810	[1]	SPRING AS-AIR
	5P-4423	[1]	ELBOW
20.	192-7812	[1]	BOLT-SPECIAL
21.	192-7820	[3]	BUMPER
22.	314-5275 C	[1]	SHAFT (OUTER)
25.	108-4311	[1]	SCREW-MACHINE (3/8-16X0.75-IN)
26.	2K-4973	[8]	LOCKNUT (3/8-16-THD)
27.	3J-4818	[1]	LOCKWASHER
28.	5C-2890 M	[3]	NUT (M6X1-THD)
29.	5P-6010 D		TUBE (0.257-M)
29A.	5P-6010 D		TUBE (0.356-M)
30.	8T-9371	[1]	BOLT (3/8-16X0.5-IN)
31.	211-5358 E		CONDUIT-FLEXIBLE (26.7-CM)
31A.	211-5358 E		CONDUIT-FLEXIBLE (35.6-CM)
34.	442-8151	[1]	CLIP-CABLE
35.	3S-2093	[4]	STRAP-CABLE

			AVAILABLE REPAIR KIT(S):
	192-7799	[1]	KIT-AIR VALVE & SWITCH (SEAT)
			(INCLUDES KNOB ASSEMBLY)
	212-7779	[1]	KIT-SHOCK ABSORBER (SUSPENSION SEAT)
			(INCLUDES, LOCKNUTS, BALL, LOCKWASHER, STRAP, SPRING, CLAMP, ADJUSTERS, BOLTS, BEARINGS, WASHERS, SHOCK ABSORBER,
			BRACKETS, KIT, CABLE ASSEMBLY & KNOB)
	211-9294	[1]	KIT-TETHER (SEAT)
			(INCLUDES TETHER)
	213-5170	[1]	KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)
			(INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
	212-7783 H	[1]	KIT-PULLEY
			(INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING)
	397-6405	[1]	KIT-SEAT AIR COMPRESSOR
			(INCLUDES STRAP, SCREWS, COMPRESSOR AS, BRACKET-MOUNT & HARNESS ASSEMBLIES)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	H		KIT MARKED H SERVICES 212-7779 KIT-SHOCK ABSORBER
	M		METRIC PART

#SEBP44041491

248-3164: TANK GP-WINDOW WASHER

TANK GP-WINDOW WASHER

248-3164 TANK GP-WINDOW WASHER
S/N B9E1-UP
PART OF 233-3138 WIPER & WASHER GP-WINDOW
ALSO AN ATTACHMENT

i02775498 SEBP4404

2483164 TANK GP-WINDOW WASHER Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6W-5698	[1]	GROMMET
2.	7T-8890	[3]	PUMP AS-WASHER (24-VOLT)
3.	254-0079	[1]	TANK-WASHER
4.	261-3345	[1]	CONNECTOR
5.	267-8715	[7]	GROMMET
6.	321-5236	[4]	PLUG
7.	144-0195 E		HOSE (10-CM EACH)
	E		ORDER BY THE CENTIMETER

#SEBP44041492

325-9410: TANK GP-WINDOW WASHER

TANK GP-WINDOW WASHER

325-9410 TANK GP-WINDOW WASHER
S/N B9E1-UP
PART OF 310-2029 WIPER & WASHER GP-WINDOW
AN ATTACHMENT

i03955214 SEBP4404

3259410 TANK GP-WINDOW WASHER Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6W-5698	[1]	GROMMET
2.	416-0021	[3]	PUMP AS-WASHER (24-VOLT)
3.	261-3345	[1]	CONNECTOR
4.	267-8715	[3]	GROMMET
5.	321-5236	[3]	PLUG
6.	355-9823	[1]	TANK AS-WINDOW WASHER

#SEBP44041493

310-2054: TRIM GP-CAB

TRIM GP-CAB

310-2054 TRIM GP-CAB -HVAC
S/N B9E700-UP
PART OF 365-2969 CAB AR
AN ATTACHMENT

i03955830 SEBP4404

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2R-2376	[1]	WASHER (7X16X0.8-MM THK)
2.	2V-2015	[1]	NUT-SPEED
3.	4E-8722	[7]	NUT (RETAINER)
4.	6V-8928	[1]	HOOK-COAT
5.	8Y-6379	[1]	KIT-HAMMER (CAB WINDOW)
			(INCLUDES BRACKET & HAMMER)
6.	8Y-6388	[4]	LOUVER AS-VENT
7.	9U-8263	[1]	COVER
8.	114-6658	[18]	WASHER (6.5X17X1-MM THK)
9.	144-4107	[2]	FASTENER
10.	164-8474	[2]	LOUVER AS-VENT
11.	171-4047	[4]	LOUVER AS-VENT
12.	392-5259	[1]	ASHTRAY AS
13.	249-4097	[1]	PLATE AS
14.	263-2576	[1]	PLATE AS
15.	274-2392	[1]	SCREW-THUMB
16.	294-1002	[1]	PLENUM (LOWER, RH)
17.	294-1004	[1]	PLENUM (LOWER, LH)
18.	297-4131	[1]	SUPPORT AS
	6V-9632 M	[3]	NUT-WELD (M6X1-THD)
	8T-3490 M	[4]	NUT-WELD (M10X1.5-THD)
19.	297-4133	[1]	COVER AS
20.	357-2270	[1]	COVER AS
22.	398-8490	[1]	COVER AS-PANEL
	297-4162	[1]	FILM-IDENTIFICATION (SWITCH PANEL, UPPER)
	398-9593	[1]	FILM-IDENTIFICATION (SWITCH PANEL, LOWER)
23.	297-4170	[1]	INSULATION
24.	303-9456	[1]	CUP HOLDER
25.	325-1258	[1]	PLENUM (UPPER, RH)
26.	325-1260	[1]	PLENUM (UPPER, LH)
27.	325-9407	[1]	FILM-IDENTIFICATION (WRITE DATA)
28.	361-0429	[1]	PANEL (LH)
29.	343-6499	[1]	COVER AS (RH)
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
	8T-3612 M	[2]	NUT-WELD (M8X1.25-THD)
	9X-2032 M	[1]	NUT-WELD (M4X0.7-THD)
30.	343-6500	[1]	COVER AS (LH)
31.	344-0989	[1]	PLATE AS
	9X-2032 M	[1]	NUT-WELD (M4X0.7-THD)
32.	361-0428	[1]	PANEL (RH)
34.	101-2867	[8]	WASHER-HARD (7.2X25X2-MM THK)
35.	104-2091	[16]	SCREW-FLAT HEAD (6-20X0.5-IN)
36.	111-4627 M	[6]	SCREW-MACHINE (M6X1X30-MM)
37.	205-7048 M	[2]	INSERT-THREADED (M6X1-X14.73-MM)
38.	331-7532	[4]	NUT-INSERT
39.	3E-8020 M	[6]	SCREW-TRUSS HEAD (M6X1X25-MM)
41.	6K-3273	[1]	RIVET-POP
42.	6V-5839	[4]	WASHER (11X21X2.5-MM THK)
43.	6V-8212 M	[4]	BOLT (M10X1.5X16-MM)
44.	7G-4824	[1]	STRAP
45.	8C-9660	[6]	WASHER (4.6X7.9X0.8-MM THK)
46.	8E-7791	[1]	STRAP
47.	8R-3695	[1]	GROMMET
48.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
49.	8T-4195 M	[6]	BOLT (M10X1.5X30-MM)
50.	9N-1995	[3]	RIVET-POP
51.	9X-2043 M	[7]	SCREW-TRUSS HEAD (M6X1X14-MM)
52.	9X-2044 M	[10]	SCREW-TRUSS HEAD (M6X1X16-MM)
53.	9X-2045 M	[9]	SCREW-TRUSS HEAD (M6X1X20-MM)
54.	5P-5927 D		SEAL (0.9-M)
55.	8T-6936 D		SEAL (0.5-M EACH)
56.	9D-3737	[1]	PLUG-BUTTON
57.	373-4446	[1]	PLUG
58.	9X-2038	[9]	WASHER (7X19X2-MM THK)
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP44041494

381-2494: TRIM GP-CAB

TRIM GP-CAB

381-2494 TRIM GP-CAB -HVAC
S/N B9E1-1126
PART OF 379-3677, 389-5970, 420-1977 CAB AR
AN ATTACHMENT

i04865524 SEBP4404

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2R-2376	[1]	WASHER (7X16X0.8-MM THK)
2.	2V-2015	[1]	NUT-SPEED
3.	172-8591 M	[7]	NUT-CLIP (M6X1-THD)
4.	6V-8928	[1]	HOOK-COAT
5.	8Y-6379	[1]	KIT-HAMMER (CAB WINDOW)
			(INCLUDES BRACKET & HAMMER)
6.	8Y-6388	[4]	LOUVER AS-VENT
7.	9U-8263 B	[1]	COVER
8.	114-6658	[21]	WASHER (6.5X17X1-MM THK)
9.	144-4107 B	[2]	FASTENER
10.	164-8474	[2]	LOUVER AS-VENT
11.	171-4047	[4]	LOUVER AS-VENT
13.	330-3865	[1]	PLATE AS
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
14.	263-2576	[1]	PLATE AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
	9R-2672 M	[1]	BOSS-THREADED (M10X1.5X120-MM)
	5G-7065	[1]	BOSS (M10X1.5-THD)
15.	274-2392	[1]	SCREW-THUMB
16.	294-1002	[1]	PLENUM (LOWER, RH)
17.	294-1004	[1]	PLENUM (LOWER, LH)
18.	419-7776	[1]	COVER AS
19.	357-2270	[1]	COVER AS
20.	398-8490	[1]	COVER AS-PANEL
	297-4162	[1]	FILM-IDENTIFICATION (SWITCH PANEL, UPPER)
	398-9593	[1]	FILM-IDENTIFICATION (SWITCH PANEL, LOWER)
21.	297-4170	[1]	INSULATION
22.	303-9456	[1]	CUP HOLDER
23.	325-1258	[1]	PLENUM (UPPER, RH)
24.	325-1260	[1]	PLENUM (UPPER, LH)
25.	325-9407	[1]	FILM-IDENTIFICATION (WRITE DATA)
26.	343-6499	[1]	COVER AS (RH)
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
	8T-3612 M	[6]	NUT-WELD (M8X1.25-THD)
	9X-2032 M	[1]	NUT-WELD (M4X0.7-THD)
27.	343-6500	[1]	COVER AS (LH)
	6V-9632 M	[4]	NUT-WELD (M6X1-THD)
	8T-3612 M	[4]	NUT-WELD (M8X1.25-THD)
28.	361-3114	[1]	PLATE AS
	9X-2032 M	[2]	NUT-WELD (M4X0.7-THD)
29.	357-2261	[1]	SUPPORT AS
	6V-9632 M	[3]	NUT-WELD (M6X1-THD)
	8T-3490 M	[4]	NUT-WELD (M10X1.5-THD)
30.	361-0428	[1]	PANEL (RH)
31.	361-0429	[1]	PANEL (LH)
34.	104-2091	[16]	SCREW-FLAT HEAD (6-20X0.5-IN)
35.	111-4627 M	[6]	SCREW-MACHINE (M6X1X30-MM)
37.	195-0936 M	[6]	INSERT-THREADED (M6X1-THD)
38.	3E-8020 M	[8]	SCREW-TRUSS HEAD (M6X1X25-MM)
39.	9X-2038	[9]	WASHER (7X19X2-MM THK)
40.	6K-3273	[1]	RIVET-POP
41.	6V-5839	[4]	WASHER (11X21X2.5-MM THK)
42.	6V-8212 M	[4]	BOLT (M10X1.5X16-MM)
43.	7G-4824	[1]	STRAP
44.	8C-9660	[6]	WASHER (4.6X7.9X0.8-MM THK)
45.	8E-7791	[1]	STRAP
46.	8R-3695	[1]	GROMMET
47.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
48.	8T-4195 M	[6]	BOLT (M10X1.5X30-MM)
49.	9N-1995	[3]	RIVET-POP
50.	9X-2043 M	[7]	SCREW-TRUSS HEAD (M6X1X14-MM)
51.	9X-2044 M	[14]	SCREW-TRUSS HEAD (M6X1X16-MM)
52.	9X-2045 M	[6]	SCREW-TRUSS HEAD (M6X1X20-MM)
53.	5P-5927 D		SEAL (0.9-M)
54.	8T-6936 D		SEAL (4.5-M EACH)
55.	373-4446	[1]	PLUG
56.	2V-3726	[1]	BUMPER
57.	1R-0622 B	[6]	PLUG-BUTTON
58.	193-5916	[4]	PLUG
59.	162-2165 M	[1]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
60.	096-6166	[1]	WASHER-HARD (4.5X9X1-MM THK)
61.	8D-6542	[1]	GROMMET
62.	7X-0579	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP44041495

381-2494: TRIM GP-CAB

TRIM GP-CAB

381-2494 TRIM GP-CAB -HVAC
S/N B9E1127-UP
PART OF 379-3677, 389-5970, 420-1977 CAB AR
AN ATTACHMENT

i06278368 SEBP4404

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1R-0622 B	[6]	PLUG-BUTTON
2.	6V-8928	[1]	HOOK-COAT
3.	8Y-6379	[1]	KIT-HAMMER (CAB WINDOW)
			(INCLUDES BRACKET & HAMMER)
4.	8Y-6388	[4]	LOUVER AS-VENT
5.	9U-8263 B	[1]	COVER
6.	144-4107 B	[2]	FASTENER
7.	164-8474	[2]	LOUVER AS-VENT
8.	171-4047	[4]	LOUVER AS-VENT
9.	214-9186 C	[5]	BUTTON
10.	228-6089 C	[1]	PLUG (ROCKER SWITCH)
11.	274-2392	[1]	SCREW-THUMB
12.	294-1002	[1]	PLENUM (LOWER, RH)
13.	294-1004	[1]	PLENUM (LOWER, LH)
14.	297-4170	[1]	INSULATION
15.	303-9456	[1]	CUP HOLDER
16.	325-1258	[1]	PLENUM (UPPER, RH)
17.	325-1260	[1]	PLENUM (UPPER, LH)
18.	325-9407	[1]	FILM-IDENTIFICATION (WRITE DATA)
19.	330-3865	[1]	PLATE AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
	9X-2032 M	[1]	NUT-WELD (M4X0.7-THD)
	419-3214	[6]	BOSS
20.	334-6090 C	[6]	STUD
21.	343-6499	[1]	COVER AS (RH)
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
	8T-3612 M	[6]	NUT-WELD (M8X1.25-THD)
	9X-2032 M	[1]	NUT-WELD (M4X0.7-THD)
22.	343-6500	[1]	COVER AS (LH)
	6V-9632 M	[4]	NUT-WELD (M6X1-THD)
	8T-3612 M	[4]	NUT-WELD (M8X1.25-THD)
23.	357-2261	[1]	SUPPORT AS
	6V-9632 M	[3]	NUT-WELD (M6X1-THD)
	8T-3490 M	[4]	NUT-WELD (M10X1.5-THD)
24.	357-2270	[1]	COVER AS
25.	361-0429	[1]	PANEL (LH)
26.	368-8072 C	[1]	PANEL (RH)
27.	373-4446	[1]	PLUG
28.	398-8490	[1]	COVER AS-PANEL
		[1]	PANEL-COVER
	297-4162	[1]	FILM-IDENTIFICATION (SWITCH PANEL, UPPER)
	398-9593	[1]	FILM-IDENTIFICATION (SWITCH PANEL, LOWER)
29.	417-6775 C	[1]	TRAY
30.	419-7776	[1]	COVER AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
31.	419-8564 C	[2]	STRAP
32.	436-7082 C	[1]	TRAY
33.	437-8991 C	[1]	NET AS (STORAGE)
34.	438-8077 C	[1]	BIN-STORAGE
35.	438-8078 C	[1]	BIN-STORAGE
36.	439-9973 C	[6]	CLIP
37.	441-7480 C	[1]	PLATE AS
	9R-2672 M	[1]	BOSS-THREADED (M10X1.5X120-MM)
	9R-2821 M	[1]	BOSS (M10X1.5X15-MM)
38.	443-6429 C	[1]	FLOOR MAT AS
39.	C	[2]	TUBE AS
40.	448-3613 C	[1]	STRAP
41.	463-6185 C	[1]	LINER
42.	463-6186 C	[1]	LINER
43.	096-6166	[1]	WASHER-HARD (4.5X9X1-MM THK)
44.	104-2091	[16]	SCREW-FLAT HEAD (6-20X0.5-IN)
45.	111-4627 M	[6]	SCREW-MACHINE (M6X1X30-MM)
46.	232-1473 C	[15]	WASHER (6X18X1-MM THK)
47.	162-2165 M	[1]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
48.	195-0936 M	[6]	INSERT-THREADED (M6X1-THD)
49.	212-6891 C	[6]	RETAINER
50.	4I-3069	[1]	WASHER-HARD (7X15.5X0.8-MM THK)
51.	2V-2015	[1]	NUT-SPEED
52.	2V-3726	[1]	BUMPER
53.	3E-8020 M	[8]	SCREW-TRUSS HEAD (M6X1X25-MM)
54.	172-8591 M	[7]	NUT-CLIP (M6X1-THD)
55.	6K-3273	[4]	RIVET-POP
57.	8T-4191 M	[4]	BOLT (M10X1.5X16-MM)
58.	7X-0579	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
59.	8C-9660	[6]	WASHER (4.6X7.9X0.8-MM THK)
60.	8R-3695	[1]	GROMMET
61.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
62.	8T-4195 M	[6]	BOLT (M10X1.5X30-MM)
64.	9X-2038 C	[11]	WASHER (7X19X2-MM THK)
65.	9X-2043 CM	[9]	SCREW-TRUSS HEAD (M6X1X14-MM)
66.	9X-2044 CM	[6]	SCREW-TRUSS HEAD (M6X1X16-MM)
67.	9X-2045 M	[6]	SCREW-TRUSS HEAD (M6X1X20-MM)
68.	5P-5927 D		SEAL (0.9-M)
69.	8T-6936 D		SEAL (4.5-M EACH)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP44041496

233-3113: WINDOW GP-CAB

WINDOW GP-CAB

233-3113 WINDOW GP-CAB -REAR
S/N B9E1-UP
AN ATTACHMENT

i02773203 SEBP4404

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	233-3235	[1]	GLASS-REAR
2.	233-3236	[1]	GLASS (LH)
3.	233-3238	[1]	GLASS (RH)
4.	263-2574	[6]	CLIP
5.	3E-3000 E		SEAL (387-CM)
5A.	3E-3000 E		SEAL (398-CM EACH)
	E		ORDER BY THE CENTIMETER

#SEBP44041497

233-3140: WINDOW GP-CAB

WINDOW GP-CAB

233-3140 WINDOW GP-CAB -FRONT
S/N B9E1-UP
CANNOT BE USED WITH @@@@@233-3286@@@@@
AN ATTACHMENT

i02772817 SEBP4404

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	114-6658	[6]	WASHER (6.5X17X1-MM THK)
2.	238-8760	[1]	GLASS-FRONT
3.	249-4081	[2]	BRACKET
4.	9X-2045 M	[6]	SCREW-TRUSS HEAD (M6X1X20-MM)
5.	148-5353 E		SEAL (187-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP44041498

233-3286: WINDOW GP-CAB

WINDOW GP-CAB

233-3286 WINDOW GP-CAB -VENT, FRONT
S/N B9E1-UP
CANNOT BE USED WITH @@@@@233-3140@@@@@
AN ATTACHMENT

i02775823 SEBP4404

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-2045 M	[3]	SCREW-TRUSS HEAD (M6X1X20-MM)
2.	114-6658	[5]	WASHER (6.5X17X1-MM THK)
3.	251-2364	[1]	BRACKET AS
4.	251-2365	[1]	HINGE AS
5.	251-2422	[1]	BRACKET
6.	251-4207	[1]	LATCH AS-WINDOW
7.	254-5094	[1]	GLASS (VENT WINDOW)
8.	225-3109 M	[2]	SCREW-TRUSS HEAD (M4X0.7X14-MM)
10.	5C-8312 M	[2]	NUT (M4X0.7-THD)
11.	7Y-7390 M	[3]	SCREW-BUTTON HEAD (M6X1X6-MM)
12.	148-5353 E		SEAL (172-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP44041499

260-6724: WINDOW GP-CAB

WINDOW GP-CAB

260-6724 WINDOW GP-CAB
S/N B9E1-UP
AN ATTACHMENT

i02785219 SEBP4404

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	233-3188 Y	[1]	WIPER GP-WINDOW (SIDE, RH, LH)
2.	233-3235	[1]	GLASS-REAR
3.	235-6175	[1]	HARNESS AS-WINDOW WIPER
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
4.	260-6725	[1]	GLASS (CAB, LH)
5.	260-6726	[1]	GLASS (CAB, RH)
6.	263-2574	[6]	CLIP
7.	3E-3000 E		SEAL (387-CM)
7A.	3E-3000 E		SEAL (398-CM EACH)
	E		ORDER BY THE CENTIMETER
	Y		SEPARATE ILLUSTRATION

Information:

OPERATOR STATION

SEAT GP

Operation and Maintenance Manual

Seat Belt - Replace
160M Motor Grader

Seat Belt - Inspect
160M Motor Grader

Seat Belt
160M Motor Grader

Seat
160M Motor Grader

Special Instruction

Installation Instruction for 212-7779 Shock Absorber Kit , 192-7848 Shock Absorber Kit , and 213-5170 Indicator Kit on Toggle Link Vertical (TLV) Seat Suspensions {7324}
Installation Instruction for 212-7779 Shock Absorber Kit , 192-7848 Shock Absorber Kit , and 213-5170 Indicator Kit on Toggle Link Vertical (TLV) Seat Suspensions {7324}

Replacement of the Seat Suspension Compressor on Certain Caterpillar Machines{7312, 731S, 7324}
Replacement of the Seat Suspension Compressor on Certain Caterpillar Machines{7312, 731S, 7324}

Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}

Technical Information Bulletin

Operator Seat Belt Not Retracting {7327}
Operator Seat Belt Not Retracting {7327}

Systems Operation

Contour Seat Air Suspension with Air Compressor
Contour Series Seat

Contour Seat Air Suspension with Air System
Contour Series Seat

Contour Seat Controls
Contour Series Seat

Mechanical Suspension
Contour Series Seat

Comfort Seat Air Suspension with Air Compressor
Comfort Series Seat For Caterpillar Machines

Comfort Seat with Lumbar, Side Controls, and Slide Swivel
Comfort Series Seat For Caterpillar Machines

Serial Number Effectivity
Comfort Series Seat For Caterpillar Machines

Comfort Seat Air Suspension with System Air
Comfort Series Seat For Caterpillar Machines

Comfort Seat Controls
Comfort Series Seat For Caterpillar Machines

Optimized Seat Air Suspension with Air Compressor
Comfort Series Seat For Caterpillar Machines

Optimized Seat Controls
Comfort Series Seat For Caterpillar Machines

Optimized Seat with Lumbar, Side Controls, and Slide Swivel
Comfort Series Seat For Caterpillar Machines

Seat Maintenance Interval Schedule
Comfort Series Seat For Caterpillar Machines

General Information
Comfort Series Seat For Caterpillar Machines

Component Descriptions
Comfort Series Seat For Caterpillar Machines

Troubleshooting
Comfort Series Seat For Caterpillar Machines

General Information
Caterpillar Advanced Ride Management (CARM) Seat Suspension System

Component Descriptions
Caterpillar Advanced Ride Management (CARM) Seat Suspension System

Testing and Adjusting

Troubleshooting Chart
Contour Series Seat

Troubleshooting

MID 082 - CID 2113 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2113 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 027 - CID 2113 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2113 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Troubleshooting
Caterpillar Advanced Ride Management (CARM) Seat Suspension System

Disassembly and Assembly

Contour Seat With Front Controls - Disassemble
Contour Series Seat

Contour Seat With Front Controls - Assemble
Contour Series Seat

Contour Seat With Lumbar Option and Side Controls - Disassemble
Contour Series Seat

Contour Seat With Lumbar Option and Side Controls - Assemble
Contour Series Seat

Swivel Seat - Disassemble
Comfort Series Seat For Caterpillar Machines

Swivel Seat - Assemble
Comfort Series Seat For Caterpillar Machines

Air Suspension With Toggle Switch Height Adjustment - Disassemble
Comfort Series Seat For Caterpillar Machines

Air Suspension With Toggle Switch Height Adjustment - Assemble
Contour Series Seat

Air Suspension With System Air - Disassemble
Contour Series Seat

Air Suspension With System Air - Assemble
Comfort Series Seat For Caterpillar Machines

Mechanical Suspension With Fixed Damper - Disassemble
Contour Series Seat

Mechanical Suspension With Fixed Damper - Assemble
Comfort Series Seat For Caterpillar Machines

Mechanical Suspension With Variable Damper - Disassemble
Contour Series Seat

Mechanical Suspension With Variable Damper - Assemble
Comfort Series Seat For Caterpillar Machines

Comfort Seat with Lumbar Option and Side Controls - Disassemble
Comfort Series Seat For Caterpillar Machines

Comfort Seat with Lumbar Option and Side Controls - Assemble
Comfort Series Seat For Caterpillar Machines

Air Suspension with Air Valve Knob Height Adjustment - Disassemble
Comfort Series Seat For Caterpillar Machines

Air Suspension With Air Valve Knob Height Adjustment - Assemble
Comfort Series Seat For Caterpillar Machines

Comfort Seat Air Suspension with Air Compressor - Assemble
Comfort Series Seat For Caterpillar Machines

Comfort Seat Air Suspension with Air Compressor - Disassemble
Comfort Series Seat For Caterpillar Machines

Comfort Seat with Front Controls - Disassemble
Comfort Series Seat For Caterpillar Machines

Comfort Seat with Front Controls - Assemble
Comfort Series Seat For Caterpillar Machines

Seat - Remove and Install
160M Motor Grader Machine Systems

Optimized Seat with Front Controls - Disassemble and Assemble
Comfort Series Seat For Caterpillar Machines

Service Magazine

A New Routing Is Now Available for the Valve Harness Assembly (Seat Air Compressor) on Certain Caterpillar Machines {7312, 731S, 7324}
2010/08/25

An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/11/12

Improved Operator Seat Air Compressor Is Now Available for Certain Machines {731K, 7324}
Improved Operator Seat Air Compressor Is Now Available for Certain Machines {731K, 7324}

A New Adjuster Assembly For the Armrest is Now Used on Certain Motor Graders {7307}
2015/07/30

An Improved Routing of the Wiring Harness in the Seat Suspension Group Is Now Used on Certain Motor Graders {7324}
An Improved Routing of the Wiring Harness in the Seat Suspension Group Is Now Used on Certain Motor Graders {7324}

A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324}
A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324}

Caterpillar Parts SIS Catalog 160M :

256-8768 SUSPENSION GP-SEAT

160-7165 SUSPENSION GP-SEAT

345-1272 SUPPORT GP-CONTROL

345-1271 SUPPORT GP-CONTROL

342-8961 SUPPORT GP-CONTROL

233-3225 SUPPORT GP-CONTROL

233-3224 SUPPORT GP-CONTROL

504-4302 SEAT GP-SUSPENSION

248-3164 TANK GP-WINDOW WASHER

325-9410 TANK GP-WINDOW WASHER

310-2054 TRIM GP-CAB

381-2494 TRIM GP-CAB

233-3113 WINDOW GP-CAB

233-3140 WINDOW GP-CAB

233-3286 WINDOW GP-CAB

Truck sale:

207,000

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

173,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

209,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

204,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

217,000

Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.