217-3501 CYLINDER GP-HYDRAULIC -WORK TOOL LIFT S/N B9E1-UP PART OF 293-5556 LIFT GP-WORK TOOL AN ATTACHMENT 160M

HYDRAULIC SYSTEM

CYLINDER GP

0. 217-3501 CYLINDER G
1. 314-9338 CYLINDER G

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)

2. 233-7161 EDGE GP-BI
3. 233-7162 EDGE GP-BI
4. 233-7163 EDGE GP-BI
5. 233-7164 EDGE GP-BI
6. 268-8690 EDGE GP-BI
7. 268-8691 EDGE GP-BI
8. 268-8692 EDGE GP-BI
9. 268-8693 EDGE GP-BI
0. INFORMATION

MOTOR GRADER 160M MOTOR GRADER B9E
160M Motor Grader B9E00001-UP (MACHINE) POWERED BY C9 Engine SEBP4404 160M B9E (2007)

HYDRAULIC SYSTEM

CYLINDER GP

389-6062 CYLINDER GP-STEERING

249-5299 CYLINDER GP-WHEEL LEAN

217-3501 CYLINDER GP-HYDRAULIC

314-9338 CYLINDER GP-HYDRAULIC

#SEBP44041540

217-3501: CYLINDER GP-HYDRAULIC

CYLINDER GP-HYDRAULIC

217-3501 CYLINDER GP-HYDRAULIC -WORK TOOL LIFT
S/N B9E1-UP
PART OF 293-5556 LIFT GP-WORK TOOL
AN ATTACHMENT

i02788553 SEBP4404

2173501 CYLINDER GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2K-7468	[1]	LOCKNUT (1-1/4-12-THD)
2.	4T-6907	[1]	RING-WEAR
3.	4T-8054	[1]	SEAL AS
4.	7J-9885	[1]	RING-WEAR
5.	167-2190	[1]	SEAL AS-BUFFER
6.	219-7242	[1]	TUBE AS
7.	219-7243	[1]	ROD AS
8.	219-7244	[1]	PISTON
9.	219-7245	[1]	HEAD
10.	231-3539	[1]	SEAL-WIPER
11.	167-2300	[1]	SEAL-U-CUP
12.	2H-3931	[2]	SEAL-O-RING
13.	4J-9224	[1]	RING-BACKUP

#SEBP44041541

314-9338: CYLINDER GP-HYDRAULIC

CYLINDER GP-HYDRAULIC

314-9338 CYLINDER GP-HYDRAULIC
S/N B9E1-UP
88.9-MM (3.5-IN) BORE X 549-MM (21.6-IN) STROKE. STEERING
PART OF 309-6809 BLADE GP-BULLDOZER
AN ATTACHMENT

i02990688 SEBP4404

3149338 CYLINDER GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	163-0325	[1]	CYLINDER AS
	173-7211	[1]	CAP AS
	1K-6985	[2]	RING-RETAINING
	364-8483	[1]	BEARING-ALIGNING
2.	163-0326	[1]	PISTON
3.	163-0327	[1]	ROD AS
	1K-6985	[2]	RING-RETAINING
	9M-1328	[1]	BEARING-SELF-ALIGNING
4.	314-9339	[1]	HEAD
5.	173-9779 M	[1]	BOLT (M24X3X80-MM)
6.	175-7898 J	[1]	SEAL-O-RING
7.	308-1880 J	[1]	SEAL-WIPER
8.	308-1883 J	[1]	SEAL AS
9.	308-1884 J	[1]	SEAL AS
10.	4J-9224 J	[1]	RING-BACKUP
11.	4T-6907 J	[1]	RING-WEAR
12.	4T-8054 J	[1]	SEAL AS
13.	6V-8237	[1]	WASHER (26X44X4-MM THK)
14.	7J-9885 J	[1]	RING-WEAR

			AVAILABLE REPAIR KIT(S):
	326-0503 J	[1]	KIT-SEAL
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP44041542

233-7161: EDGE GP-BIT & CUTTING

EDGE GP-BIT & CUTTING

233-7161 EDGE GP-BIT & CUTTING
S/N B9E1-UP
12-FT
FOR USE WITH @@@@@243-6702@@@@@
CANNOT BE USED WITH @@@@@231-2144@@@@@, @@@@@233-7139@@@@@, @@@@@233-7162@@@@@, @@@@@233-7163@@@@@, @@@@@233-7164@@@@@, @@@@@268-8690@@@@@, @@@@@268-8691@@@@@, @@@@@268-8692@@@@@, @@@@@268-8693@@@@@, @@@@@268-8694@@@@@, @@@@@268-8695@@@@@, @@@@@268-8696@@@@@, @@@@@268-8697@@@@@, @@@@@233-7140@@@@@, @@@@@233-7141@@@@@, @@@@@233-7142@@@@@, @@@@@233-7143@@@@@, @@@@@233-7144@@@@@
AN ATTACHMENT

i02778938 SEBP4404

2337161 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6Y-4339	[60]	BIT GP (30-MM WIDE)
			(EACH INCLUDES)
	068-4860	[1]	RING-RETAINING
2.	159-0318	[4]	ADAPTER (3-FT)
3.	2J-3506	[24]	NUT-FULL (3/4-10-THD)
4.	5J-4771	[24]	BOLT-PLOW (3/4-10X2.75-IN)

#SEBP44041543

233-7162: EDGE GP-BIT & CUTTING

EDGE GP-BIT & CUTTING

233-7162 EDGE GP-BIT & CUTTING
S/N B9E1-UP
12-FT
FOR USE WITH @@@@@243-6702@@@@@
CANNOT BE USED WITH @@@@@231-2144@@@@@, @@@@@233-7139@@@@@, @@@@@233-7163@@@@@, @@@@@233-7164@@@@@, @@@@@268-8690@@@@@, @@@@@268-8691@@@@@, @@@@@268-8692@@@@@, @@@@@268-8693@@@@@, @@@@@268-8694@@@@@, @@@@@268-8695@@@@@, @@@@@268-8696@@@@@, @@@@@268-8697@@@@@, @@@@@233-7140@@@@@, @@@@@233-7141@@@@@, @@@@@233-7142@@@@@, @@@@@233-7143@@@@@, @@@@@233-7144@@@@@
AN ATTACHMENT

i02778942 SEBP4404

2337162 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	105-5180	[48]	BIT GP (23-MM WIDE)
			(EACH INCLUDES)
	068-4860	[1]	RING-RETAINING
2.	159-0313	[4]	ADAPTER (3-FT)
3.	2J-3506	[24]	NUT-FULL (3/4-10-THD)
4.	5J-4771	[24]	BOLT-PLOW (3/4-10X2.75-IN)

#SEBP44041544

233-7163: EDGE GP-BIT & CUTTING

EDGE GP-BIT & CUTTING

233-7163 EDGE GP-BIT & CUTTING
S/N B9E1-UP
14-FT
FOR USE WITH @@@@@243-6703@@@@@, @@@@@243-6704@@@@@
CANNOT BE USED WITH @@@@@231-2144@@@@@, @@@@@233-7139@@@@@, @@@@@233-7161@@@@@, @@@@@233-7162@@@@@, @@@@@233-7164@@@@@, @@@@@268-8690@@@@@, @@@@@268-8691@@@@@, @@@@@268-8692@@@@@, @@@@@268-8696@@@@@, @@@@@268-8695@@@@@, @@@@@268-8697@@@@@, @@@@@233-7140@@@@@, @@@@@233-7141@@@@@, @@@@@233-7142@@@@@, @@@@@233-7143@@@@@, @@@@@268-8693@@@@@, @@@@@268-8694@@@@@, @@@@@233-7144@@@@@
AN ATTACHMENT

i02778948 SEBP4404

2337163 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6Y-4339	[70]	BIT GP (30-MM WIDE)
			(EACH INCLUDES)
	068-4860	[1]	RING-RETAINING
2.	428-6747	[4]	ADAPTER (2-FT)
3.	159-0318	[2]	ADAPTER (3-FT)
4.	2J-3506	[28]	NUT-FULL (3/4-10-THD)
5.	5J-4771	[28]	BOLT-PLOW (3/4-10X2.75-IN)

#SEBP44041545

233-7164: EDGE GP-BIT & CUTTING

EDGE GP-BIT & CUTTING

233-7164 EDGE GP-BIT & CUTTING
S/N B9E1-UP
14-FT BLADE
FOR USE WITH @@@@@243-6703@@@@@, @@@@@243-6704@@@@@
CANNOT BE USED WITH @@@@@231-2144@@@@@, @@@@@233-7139@@@@@, @@@@@233-7161@@@@@, @@@@@233-7163@@@@@, @@@@@268-8690@@@@@, @@@@@268-8691@@@@@, @@@@@268-8692@@@@@, @@@@@268-8693@@@@@, @@@@@268-8694@@@@@, @@@@@268-8695@@@@@, @@@@@268-8695@@@@@, @@@@@268-8696@@@@@, @@@@@233-7140@@@@@, @@@@@233-7141@@@@@, @@@@@233-7142@@@@@, @@@@@233-7143@@@@@, @@@@@268-8697@@@@@
AN ATTACHMENT

i02778843 SEBP4404

2337164 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	105-5180	[56]	BIT GP (23-MM WIDE)
			(EACH INCLUDES)
	068-4860	[1]	RING-RETAINING
2.	159-0313	[2]	ADAPTER (3-FT)
3.	428-6746	[4]	ADAPTER (2-FT)
4.	2J-3506	[28]	NUT-FULL (3/4-10-THD)
5.	5J-4771	[28]	BOLT-PLOW (3/4-10X2.75-IN)

#SEBP44041546

268-8690: EDGE GP-BIT & CUTTING

EDGE GP-BIT & CUTTING

268-8690 EDGE GP-BIT & CUTTING
S/N B9E1-UP
12-FT
FOR USE WITH @@@@@243-6702@@@@@
AN ATTACHMENT

i02787302 SEBP4404

2688690 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	105-5180	[60]	BIT GP (23-MM WIDE)
			(EACH INCLUDES)
	068-4860	[1]	RING-RETAINING
2.	159-0318	[4]	ADAPTER (3-FT)
3.	2J-3506	[24]	NUT-FULL (3/4-10-THD)
4.	5J-4771	[24]	BOLT-PLOW (3/4-10X2.75-IN)

#SEBP44041547

268-8691: EDGE GP-BIT & CUTTING

EDGE GP-BIT & CUTTING

268-8691 EDGE GP-BIT & CUTTING
S/N B9E1-UP
12-FT
FOR USE WITH @@@@@243-6702@@@@@
CANNOT BE USED WITH @@@@@233-7139@@@@@, @@@@@233-7161@@@@@, @@@@@233-7162@@@@@, @@@@@233-7163@@@@@, @@@@@233-7164@@@@@, @@@@@268-8692@@@@@, @@@@@268-8693@@@@@, @@@@@268-8694@@@@@, @@@@@268-8695@@@@@, @@@@@268-8696@@@@@, @@@@@268-8697@@@@@, @@@@@233-7140@@@@@, @@@@@233-7141@@@@@, @@@@@233-7142@@@@@, @@@@@233-7143@@@@@
AN ATTACHMENT

i02787301 SEBP4404

2688691 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	105-5183	[60]	BIT GP (15.5-MM)
			(EACH INCLUDES)
	068-4860	[1]	RING-RETAINING
2.	159-0318	[4]	ADAPTER (3-FT)
3.	2J-3506	[24]	NUT-FULL (3/4-10-THD)
4.	5J-4771	[24]	BOLT-PLOW (3/4-10X2.75-IN)

#SEBP44041548

268-8692: EDGE GP-BIT & CUTTING

EDGE GP-BIT & CUTTING

268-8692 EDGE GP-BIT & CUTTING
S/N B9E1-UP
12-FT
FOR USE WITH @@@@@243-6702@@@@@
CANNOT BE USED WITH @@@@@233-7139@@@@@, @@@@@233-7161@@@@@, @@@@@233-7162@@@@@, @@@@@233-7163@@@@@, @@@@@233-7164@@@@@, @@@@@268-8691@@@@@, @@@@@268-8693@@@@@, @@@@@268-8694@@@@@, @@@@@268-8695@@@@@, @@@@@268-8696@@@@@, @@@@@268-8697@@@@@, @@@@@233-7140@@@@@, @@@@@233-7141@@@@@, @@@@@233-7142@@@@@, @@@@@233-7143@@@@@, @@@@@233-7144@@@@@
AN ATTACHMENT

i02787300 SEBP4404

2688692 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6Y-4339	[48]	BIT GP (30-MM WIDE)
			(EACH INCLUDES)
	068-4860	[1]	RING-RETAINING
2.	159-0313	[4]	ADAPTER (3-FT)
3.	2J-3506	[24]	NUT-FULL (3/4-10-THD)
4.	5J-4771	[24]	BOLT-PLOW (3/4-10X2.75-IN)

#SEBP44041549

268-8693: EDGE GP-BIT & CUTTING

EDGE GP-BIT & CUTTING

268-8693 EDGE GP-BIT & CUTTING
S/N B9E1-UP
12-FT
FOR USE WITH @@@@@243-6702@@@@@
CANNOT BE USED WITH @@@@@233-7139@@@@@, @@@@@233-7161@@@@@, @@@@@233-7162@@@@@, @@@@@233-7163@@@@@, @@@@@233-7164@@@@@, @@@@@268-8691@@@@@, @@@@@268-8692@@@@@, @@@@@268-8694@@@@@, @@@@@268-8695@@@@@, @@@@@268-8696@@@@@, @@@@@268-8697@@@@@, @@@@@233-7140@@@@@, @@@@@233-7141@@@@@, @@@@@233-7142@@@@@, @@@@@233-7143@@@@@, @@@@@233-7144@@@@@
AN ATTACHMENT

i02787297 SEBP4404

2688693 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	105-5183 Y	[48]	BIT GP (15.5-MM)
2.	159-0313	[4]	ADAPTER (3-FT)
3.	2J-3506	[28]	NUT-FULL (3/4-10-THD)
4.	5J-4771	[28]	BOLT-PLOW (3/4-10X2.75-IN)
	Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Operation and Maintenance Manual

Blade Lift Cylinder Socket - Lubricate
160M Motor Grader

Centershift Cylinder Socket - Lubricate
160M Motor Grader

Ripper Cylinder Bearings - Lubricate
160M Motor Grader

Steering Cylinder Ends and Tie Rods - Lubricate
160M Motor Grader

Wheel Lean Bearings - Lubricate
160M Motor Grader

Blade Lift Cylinder Socket - Check/Adjust/Replace
160M Motor Grader

Centershift Cylinder Socket - Check/Adjust/Replace
160M Motor Grader

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

MANUAL INSTALLATION OF STEERING CYLINDER POSITION SENSOR SETUP PARAMETERS{430S}
MANUAL INSTALLATION OF STEERING CYLINDER POSITION SENSOR SETUP PARAMETERS{430S}

A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}

Procedure to Rework the Scarifier Bracket Group on Certain Motor Graders{5213, 6162}
Procedure to Rework the Scarifier Bracket Group on Certain Motor Graders{5213, 6162}

Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 140M AND 160M ALL WHEEL DRIVE MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 140M AND 160M ALL WHEEL DRIVE MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)

PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

The "2007A Version 1.1" of CAT ET is Unable to Read Cylinder Trim Files{0785, 4303}
The "2007A Version 1.1" of CAT ET is Unable to Read Cylinder Trim Files{0785, 4303}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}

Specifications

Centershift Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems

Blade Lift Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems

Wheel Lean Cylinder (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive

Steering Cylinder (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive

Articulation Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Blade Tip Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Centershift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Ripper Lift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Sideshift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Wheel Lean Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Articulation Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems

Steering Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Steering Cylinder and Mounting
120M, 140M and 160M Motor Graders All Wheel Drive

Steering Cylinder (All Wheel Drive)
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Blade Lift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Service Letter-APD

Testing and Adjusting

Hydraulic Cylinder Drift - Check
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Cylinder Cycle Time - Check
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Steering System - Purge
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Bench Test Procedures

Troubleshooting

MID 082 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 027 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Disassembly and Assembly

Centershift Cylinder - Remove and Install
160M Motor Grader Machine Systems

Sideshift Cylinder - Remove and Install
160M Motor Grader Machine Systems

Blade Tip Cylinder - Remove and Install
160M Motor Grader Machine Systems

Articulation Cylinder - Remove and Install - Right Side
160M Motor Grader Machine Systems

Ripper Lift Cylinder - Remove and Install
160M Motor Grader Machine Systems

Articulation Cylinder - Remove and Install - Left Side
160M Motor Grader Machine Systems

Steering Cylinder - Remove and Install
160M Motor Grader Machine Systems

Wheel Lean Cylinder - Remove and Install
160M Motor Grader Machine Systems

Blade Lift Cylinder - Remove and Install
160M Motor Grader Machine Systems

Steering Cylinder - Remove and Install
160M Motor Grader Machine Systems

Service Magazine

Improvement to the Boot Seals for the Steering Cylinders on Certain Motor Graders {4303}
2008/03/24

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17

A New Boot Seal is Available for Certain Motor Grader Steering Cylinders {4303}
2009/07/20

Blade Lift Modulation that is Selectable is Available {5063, 5102, 7300, 7451, 7610, 7620}
2009/09/07

New Parts Update the Seal Kit for the Centershift Cylinders and the Lift Cylinders on Certain Motor Graders {5102, 5223}
2009/11/18

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24

Optional Guards are Now Available for Certain M Series and M Series 2 Motor Graders {7164}
2011/11/07

An Improved Blade Tip Hydraulic Cylinder Group Is Now Used on Certain M Series Motor Graders {7562}
2014/09/29

New Shear Pin for Circle Group Is Now Available for Certain Motor Graders Used in Snow Removal Applications {5106}
New Shear Pin for Circle Group Is Now Available for Certain Motor Graders Used in Snow Removal Applications {5106}

Cat® Reman Announces the Availability of Remanufactured Hydraulic Rods and Cylinders for Certain Cat Machines {7562}
2015/08/21

The Assembly Procedure For The Blade Lift Cylinder Has Been Improved On Certain Motor Graders {5102}
2015/02/27

New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}

Cat® Reman Announces Remanufactured Cylinders For Motor Grader Applications {4303, 5102, 5106, 5211, 5213, 5223, 5229, 5265}
2015/07/21

Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}
Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}

Caterpillar Parts SIS Catalog 160M :

360-5074 BRACKET GP-SCARIFIER

256-0783 BRACKET GP-SCARIFIER

293-5559 BRACE GP

309-6809 BLADE GP-BULLDOZER

258-4500 BLADE GP-BULLDOZER

152-1353 BLADE GP-BULLDOZER

243-6706 BLADE GP

243-6704 BLADE GP

314-9338 CYLINDER GP-HYDRAULIC

233-7161 EDGE GP-BIT & CUTTING

233-7162 EDGE GP-BIT & CUTTING

233-7163 EDGE GP-BIT & CUTTING

233-7164 EDGE GP-BIT & CUTTING

268-8690 EDGE GP-BIT & CUTTING

268-8691 EDGE GP-BIT & CUTTING

268-8692 EDGE GP-BIT & CUTTING

Truck sale:

207,000

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

173,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

209,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

204,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

217,000

Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.