AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

452-3133 EXTENSION GP-BLADE -LH S/N B9E1-UP 2-FT CANNOT BE USED WITH ANY OTHER EXTENSION GP, ACCUGRADE AR, GRADER AR, 14-FT BLADE PACKAGE AN ATTACHMENT 160M


WORK TOOLS
BLADE GP
HYDRAULIC SYSTEM
LIFT GP
WORK TOOLS
RIPPER GP

MOTOR GRADER 160M MOTOR GRADER B9E
 160M Motor Grader B9E00001-UP (MACHINE) POWERED BY C9 Engine SEBP4404 160M B9E   (2007)

WORK TOOLS

BLADE GP
EXTENSION GP-BLADE
250-0615 EXTENSION GP-BLADE
EXTENSION GP-BLADE
452-3132 EXTENSION GP-BLADE
EXTENSION GP-BLADE
452-3133 EXTENSION GP-BLADE
524-8603 EXTENSION GP-BLADE
524-8604 EXTENSION GP-BLADE
LIFT GP-BLADE
261-8536 LIFT GP-BLADE
 

#SEBP44041570
 

452-3133: EXTENSION GP-BLADE

452-3133 EXTENSION GP-BLADE -LH
S/N B9E1-UP
2-FT
CANNOT BE USED WITH ANY OTHER EXTENSION GP, ACCUGRADE AR, GRADER AR, 14-FT BLADE PACKAGE
AN ATTACHMENT
i05841315 SEBP4404
4523133 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-5334 [2] SPACER (3-MM THK)  
2. 452-3137 [1] ANGLE AS  
3. 176-5642 B [1] SPACER (2-MM THK)  
4. 176-5643 B [2] SPACER (1-MM THK)  
5. 232-2146 [1] EDGE-CUTTING  
6. 250-0613 [1] EXTENSION  
7. 452-3135 [1] PLATE AS  
8. 2J-3506 [15] NUT-FULL (3/4-10-THD)  
9. 2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
10. 5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
11. 5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
12. 9X-8885 [2] BOLT (3/4-10X2.25-IN)  
  B   USE AS REQUIRED
 

#SEBP44041571
 

524-8603: EXTENSION GP-BLADE

524-8603 EXTENSION GP-BLADE
S/N B9E1-UP
BLADE EXTENSION ATTACHMENT KIT
FIELD INSTALLATION
i06922559 SEBP4404
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  452-3137 [1] ANGLE AS  
  2A-1538 [2] BOLT (3/4-10X2.25-IN)  
  5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
  5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
  232-2146 [1] EDGE-CUTTING  
  250-0613 [1] EXTENSION  
  2J-3506 [15] NUT-FULL (3/4-10-THD)  
  452-3135 [1] PLATE AS  
  110-5334 [2] SPACER (3-MM THK)  
  176-5642 [1] SPACER (2-MM THK)  
  176-5643 [2] SPACER (1-MM THK)  
  2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
 

#SEBP44041572
 

524-8604: EXTENSION GP-BLADE

524-8604 EXTENSION GP-BLADE
S/N B9E1-UP
BLADE ATTACHMENT KIT
FIELD INSTALLATION
i06922561 SEBP4404
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  452-3137 [1] ANGLE AS  
  2A-1538 [2] BOLT (3/4-10X2.25-IN)  
  5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
  5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
  3G-2165 [1] EDGE-CUTTING  
  133-7524 [1] EXTENSION  
  2J-3506 [15] NUT-FULL (3/4-10-THD)  
  452-3134 [1] PLATE AS  
  110-5334 [3] SPACER (3-MM THK)  
  176-5642 [1] SPACER (2-MM THK)  
  176-5643 [2] SPACER (1-MM THK)  
  2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
 

#SEBP44041573
 

261-8536: LIFT GP-BLADE

261-8536 LIFT GP-BLADE
S/N B9E1-UP
PART OF 234-7718 COMMON AR
i02780365 SEBP4404
2618536 LIFT GP-BLADE Parts scheme 2618536 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)  
2. 7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)  
3. 7D-8879 B [8] SHIM (0.127-MM THK)  
4. 7D-8881 B [6] SHIM (0.254-MM THK)  
5. 7D-8882 B [2] SHIM (0.508-MM THK)  
6. 8D-4336 B [2] WASHER-THRUST (76.6X146X1.90-MM THK)  
7. 8X-5106 [1] STUD-BALL  
8. 8X-5107 [1] PIN  
9. 8X-5109 [1] BAR AS  
  8X-5108 [2] BUSHING  
  124-5836 [5] BUSHING  
10. 123-8187 B [2] WASHER-THRUST (76.6X146X1-MM THK)  
11. 201-8034 M [6] BOLT (M20X2.5X120-MM)  
12. 259-2627 M [4] BOLT (M12X1.75X40-MM)  
13. 259-4483 [2] PIN  
14. 259-4492 [2] LOCK  
15. 261-8537 [1] ARM AS (LH)  
  7D-8889 [1] BEARING (76.35-MM ID)  
  8D-8168 [1] BEARING (63.65-MM ID)  
16. 261-8538 [1] ARM AS (RH)  
  7D-8889 [1] BEARING (76.35-MM ID)  
  8D-8168 [1] BEARING (63.65-MM ID)  
17. 261-8541 [2] YOKE AS  
    (EACH INCLUDES)
  2G-8233 [1] RING  
18. 261-8543 [2] RETAINER  
19. 261-8545 [1] PLATE  
20. 261-8547 [2] LOCK  
21. 288-0735 M [1] BOLT (M12X1.75X60-MM)  
22. 112-3926 M [4] BOLT (M20X2.5X110-MM)  
23. 267-3508 [16] WASHER-HARD (22X35X3.5-MM THK)  
24. 279-6632 [5] WASHER (13.5X25.5X3-MM THK)  
25. 286-0742 M [6] NUT (M20X2.5-THD)  
26. 3P-1461 [4] SEAL-LIP TYPE  
27. 5F-0149 [2] SEAL-O-RING  
28. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)  
29. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)  
30. 7D-8883 [2] SEAL  
31. 7D-8884 [2] SEAL  
32. 7H-2444 [2] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP44041574
 

296-3008: LIFT GP-BLADE

296-3008 LIFT GP-BLADE
S/N B9E314-UP
PART OF 234-7718, 349-2553 COMMON AR
i03304403 SEBP4404
2963008 LIFT GP-BLADE Parts scheme 2963008 LIFT GP-BLADE Parts scheme 2963008 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)  
2. 7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)  
3. 7D-8879 B [8] SHIM (0.127-MM THK)  
4. 7D-8881 B [6] SHIM (0.254-MM THK)  
5. 7D-8882 B [2] SHIM (0.508-MM THK)  
6. 8D-4336 B [2] WASHER-THRUST (76.6X146X1.90-MM THK)  
7. 8X-5106 [1] STUD-BALL  
8. 8X-5107 [1] PIN  
9. 381-0356 [1] BAR AS-LINK  
9A. 8X-5108 [2] BUSHING  
9B. 382-4604 [7] BUSHING  
10. 123-8187 B [6] WASHER-THRUST (76.6X146X1-MM THK)  
11. 201-8034 M [6] BOLT (M20X2.5X120-MM)  
12. 8T-0558 M [4] BOLT-SELF-LOCKING (M12X1.75X50-MM)  
13. 259-4483 [2] PIN  
14. 259-4492 [2] LOCK  
15. 296-3004 [1] ARM AS-LIFT (LH)  
15A. 7D-8889 [1] BEARING (76.35-MM ID)  
15B. 8D-8168 [1] BEARING (63.65-MM ID)  
16. 296-3005 [1] ARM AS-LIFT (RH)  
16A. 7D-8889 [1] BEARING (76.35-MM ID)  
16B. 8D-8168 [1] BEARING (63.65-MM ID)  
17. 261-8541 [2] YOKE AS  
    (EACH INCLUDES)
  2G-8233 [1] RING  
18. 261-8543 [2] RETAINER  
19. 261-8545 [1] PLATE  
20. 261-8547 [2] LOCK  
21. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
22. 112-3926 M [4] BOLT (M20X2.5X110-MM)  
23. 8T-4123 [16] WASHER (22X35X3.5-MM THK)  
24. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4131 M [6] NUT (M20X2.5-THD)  
26. 3P-1461 [4] SEAL-LIP TYPE  
27. 5F-0149 [2] SEAL-O-RING  
28. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)  
29. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)  
30. 7D-8883 [2] SEAL  
31. 7D-8884 [2] SEAL  
32. 7H-2444 [2] SEAL-O-RING  
33. 198-4778 [4] WASHER-HARD (13.5X30X12-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP44041575
 

293-5556: LIFT GP-WORK TOOL

293-5556 LIFT GP-WORK TOOL
S/N B9E1-UP
PART OF 312-2204 LIFT GP-WORK TOOL
FOR USE WITH PLOW/BULLDOZER-LIFT VALVE AND LINES GP TO FRONT OF MOTORGRADER
AN ATTACHMENT
i05382843 SEBP4404
2935556 LIFT GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  293-5559 FY [1] BRACE GP (WORK TOOL LIFT)  
   
1. 1F-6762 [4] BOLT (1-1/2-12X4.5-IN)  
2. 2K-7468 [1] LOCKNUT (1-1/4-12-THD)  
3. 3B-8489 [11] FITTING-GREASE (1/8-27 PTF)  
4. 4H-6511 [1] BOLT (1-1/4-12X6.5-IN)  
5. 5F-9891 [4] BOLT (1-1/2-12X6-IN)  
6. 9X-2521 [8] NUT-FULL  
7. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
8. 170-4910 [1] FRAME AS-COUPLER  
9. 172-8121 [2] SPACER (34.925X60.325X14.2-MM THK)  
10. 172-8122 [2] PIN AS  
11. 172-8125 [3] PIN (SNAP)  
12. 172-8126 [1] FILM-WARNING (CRUSH HAZARD)  
13. 172-8127 [1] PIN AS (LOCKING)  
14. 172-8287 I [1] HOSE AS  
15. 172-8288 I [1] HOSE AS  
16. 194-3655 [2] BEARING GP  
17. 195-3330 [1] PLATE AS-MOUNTING  
18. 217-3501 Y [1] CYLINDER GP-HYDRAULIC (WORK TOOL LIFT)  
19. 284-7971 [1] ARM AS (LOWER)  
20. 284-7972 [1] ARM AS (UPPER)  
22. 2M-9780 [4] SEAL-O-RING  
23. 3J-1907 [4] SEAL-O-RING  
24. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 6V-8397 [4] SEAL-O-RING  
26. 6V-8636 [1] CONNECTOR  
27. 6V-8724 [3] ELBOW (90-DEG)  
28. 9X-8875 [4] BOLT (1/2-13X3.5-IN)  
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP44041576
 

293-5556: LIFT GP-WORK TOOL

293-5556 LIFT GP-WORK TOOL
S/N B9E1-UP
PART OF 312-2204 LIFT GP-WORK TOOL
FOR USE WITH PLOW/BULLDOZER-LIFT VALVE AND LINES GP TO FRONT OF MOTORGRADER
AN ATTACHMENT
i02788557 SEBP4404
2935556 LIFT GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1F-6762 [4] BOLT (1-1/2-12X4.5-IN)  
2. 2K-7468 [1] LOCKNUT (1-1/4-12-THD)  
3. 3B-8489 [11] FITTING-GREASE (1/8-27 PTF)  
4. 4H-6511 [1] BOLT (1-1/4-12X6.5-IN)  
5. 5F-9891 [4] BOLT (1-1/2-12X6-IN)  
6. 9X-2521 [8] NUT-FULL  
7. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
8. 170-4910 [1] FRAME AS-COUPLER  
9. 172-8121 [2] SPACER (34.925X60.325X14.2-MM THK)  
10. 172-8122 [2] PIN AS  
11. 172-8125 [3] PIN (SNAP)  
12. 172-8126 [1] FILM-WARNING (CRUSH HAZARD)  
13. 172-8127 [1] PIN AS (LOCKING)  
14. 172-8287 I [1] HOSE AS  
15. 172-8288 I [1] HOSE AS  
16. 194-3655 [2] BEARING GP  
17. 195-3330 [1] PLATE AS-MOUNTING  
18. 217-3501 Y [1] CYLINDER GP-HYDRAULIC (WORK TOOL LIFT)  
19. 284-7971 [1] ARM AS (LOWER)  
20. 284-7972 [1] ARM AS (UPPER)  
22. 2M-9780 [4] SEAL-O-RING  
23. 3J-1907 [4] SEAL-O-RING  
24. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 6V-8397 [4] SEAL-O-RING  
26. 6V-8636 [1] CONNECTOR  
27. 6V-8724 [3] ELBOW (90-DEG)  
28. 9X-8875 [4] BOLT (1/2-13X3.5-IN)  
   
  293-5559 FY [1] BRACE GP (WORK TOOL LIFT)  
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP44041577
 

312-2204: LIFT GP-WORK TOOL

312-2204 LIFT GP-WORK TOOL
S/N B9E1-UP
FOR USE WITH @@@@@365-3354@@@@@, @@@@@365-3355@@@@@, @@@@@365-3368@@@@@, @@@@@365-3369@@@@@
CANNOT BE USED WITH @@@@@250-3071@@@@@, @@@@@309-6809@@@@@, @@@@@351-5178@@@@@
FOR USAGE REFER TO CHART @@@@@309-9859@@@@@, @@@@@309-9873@@@@@
AN ATTACHMENT
i02788354 SEBP4404
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  293-5556 Y [1] LIFT GP-WORK TOOL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP44041578
 

248-1323: MOUNTING GP-RIPPER

248-1323 MOUNTING GP-RIPPER
S/N B9E1-UP
PART OF 248-1322, 296-3528 RIPPER AR
CANNOT BE USED WITH @@@@@264-2392@@@@@, @@@@@248-1322@@@@@, @@@@@296-3528@@@@@
AN ATTACHMENT
i02783083 SEBP4404
2481323 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-7254 [2] SPACER (47X80X20-MM THK)  
2. 3W-7256 [2] SPACER (47X80X16-MM THK)  
3. 6P-5647 [2] BOSS  
4. 104-4523 [2] CAM AS  
5. 248-1326 [1] PLATE AS  
  104-4522 [2] PLATE  
6. 291-6300 [2] LINK AS  
    (EACH INCLUDES)
  3V-2024 [1] BOSS  
7. 293-2476 [2] PIN  
8. 106-4175 M [8] BOLT (M20X2.5X60-MM)  
9. 129-3180 M [2] LOCKNUT (M12X1.75-THD)  
10. 267-3506 [6] WASHER-HARD (26X44X4-MM THK)  
11. 267-3508 [8] WASHER-HARD (22X35X3.5-MM THK)  
12. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
13. 7X-2544 M [2] BOLT (M10X1.5X140-MM)  
14. 8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
15. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
16. 9W-7469 [2] PIN  
17. 9W-7470 [2] PIN  
18. 9X-2615 M [6] BOLT (M24X3X60-MM)  
  M   METRIC PART
 

#SEBP44041579
 

269-0476: MOUNTING GP-RIPPER

269-0476 MOUNTING GP-RIPPER
S/N B9E1-UP
PART OF 269-0477 RIPPER AR
AN ATTACHMENT
i02794533 SEBP4404
2690476 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-7254 [2] SPACER (47X80X20-MM THK)  
2. 3W-7256 [2] SPACER (47X80X16-MM THK)  
3. 6P-5647 [2] BOSS  
4. 104-4523 [2] CAM AS  
5. 248-1326 [1] PLATE AS  
6. 290-3515 [2] LINK AS  
    (EACH LINK AS INCLUDES)
  3V-2024 [1] BOSS  
7. 106-4175 M [8] BOLT (M20X2.5X60-MM)  
8. 109-6776 [2] PIN  
9. 129-3180 M [2] LOCKNUT (M12X1.75-THD)  
10. 267-3506 [6] WASHER-HARD (26X44X4-MM THK)  
11. 267-3508 [8] WASHER-HARD (22X35X3.5-MM THK)  
12. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
13. 7X-2544 M [2] BOLT (M10X1.5X140-MM)  
14. 8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
15. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
16. 9W-7469 [2] PIN  
17. 9W-7470 [2] PIN  
18. 9X-2615 M [6] BOLT (M24X3X60-MM)  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Moldboard Blade
160M Motor Grader
Moldboard Wear Strip - Inspect/Adjust/Replace
160M Motor Grader
Specifications
Blade Lift
120M, 12M, 140M and 160M Motor Graders Machine Systems
Blade Lift
120M, 12M, 140M and 160M Motor Graders Machine Systems
Systems Operation
Blade Cushion - If Equipped
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Troubleshooting
MID 082 - CID 0908 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 0908 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 3694 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 3694 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
Disassembly and Assembly
Blade - Remove and Install
160M Motor Grader Machine Systems
Blade Lift Arm - Remove
160M Motor Grader Machine Systems
Blade Lift Arm - Install
160M Motor Grader Machine Systems
Service Magazine
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
Improvement For The AccuGrade<SUP>&reg;</SUP> Rotation Sensor On The M-Series Motor Graders {5060, 6151, 7220}
2009/11/18
Additional Sleeve Bearings can be Installed in the Blade Mounting Groups on Certain Motor Graders {6151}
2009/11/13
A New Moldboard Mounting Bracket is Now Available On Certain M Series Motor Graders {6151, 6152, 6154, 6155}
A New Moldboard Mounting Bracket is Now Available On Certain M Series Motor Graders {6151, 6152, 6154, 6155}
New Blade Mounting Group Wear Strips are Now Available On Certain H, M, and M Series 2 Motor Graders {6151}
2014/03/24
A Choke Check Valve Can Be Added to Improve Mastless Snow Wing Downward Blade Movement on Certain Motor Graders {6158}
A Choke Check Valve Can Be Added to Improve Mastless Snow Wing Downward Blade Movement on Certain Motor Graders {6158}

Caterpillar Parts SIS Catalog 160M :

EXTENSION GP-BLADE
452-3132 EXTENSION GP-BLADE
EXTENSION GP-BLADE
250-0615 EXTENSION GP-BLADE
EXTENSION GP-BLADE
243-6685 EXTENSION GP-BLADE
EXTENSION GP-BLADE
110-5327 EXTENSION GP-BLADE
EXTENSION GP-BLADE
110-5326 EXTENSION GP-BLADE
EDGE-CUTTING
489-6705 EDGE-CUTTING
233-7147 EDGE GP-CUTTING
233-7146 EDGE GP-CUTTING
524-8603 EXTENSION GP-BLADE
524-8604 EXTENSION GP-BLADE
LIFT GP-BLADE
261-8536 LIFT GP-BLADE
LIFT GP-BLADE
296-3008 LIFT GP-BLADE
LIFT GP-WORK TOOL
293-5556 LIFT GP-WORK TOOL
LIFT GP-WORK TOOL
293-5556 LIFT GP-WORK TOOL
312-2204 LIFT GP-WORK TOOL
MOUNTING GP-RIPPER
248-1323 MOUNTING GP-RIPPER

Truck sale:

Caterpillar 160M2, Construction
207,000 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
173,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
209,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
204,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
217,000 
Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.