273-5691 WIRING GP-ENGINE S/N CMX1-UP PART OF 183-7964 INSTALLATION AR-ENGINE 583T PIPELAYER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 273-5691 WIRING GP-
1. 183-7951 WIRING GP-
2. 183-7951 WIRING GP-
3. 183-7951 WIRING GP-
4. 257-4183 WIRING GP-

POWER TRAIN

AXLE GP

5. 1Q-3056 AXLE GP

PUMP GP

6. 323-3591 BODY AS-OI

BRAKE & DIFFERENTIAL DRIVE GP

7. 239-0774 BRAKE & DI

BRAKE & PLANETARY GP

8. 239-0775 BRAKE & PL

TRANSMISSION GP

9. 210-0084 CASE & PAR
0. INFORMATION

PIPELAYER 583T PIPELAYER CMX
583T PIPELAYER CMX00001-UP (MACHINE) POWERED BY C15 Engine SEBP4415 583T CMX (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

236-6223 WIRING GP-ELECTRONIC CONTROL

354-0043 WIRING GP-ELECTRONIC CONTROL

273-5691 WIRING GP-ENGINE

183-7951 WIRING GP-PLATFORM

#SEBP44150330

273-5691: WIRING GP-ENGINE

WIRING GP-ENGINE

273-5691 WIRING GP-ENGINE
S/N CMX1-UP
PART OF 183-7964 INSTALLATION AR-ENGINE

i02407220 SEBP4415

For full view, you need register

Parts for your 583T PIPELAYER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8S-2634	[1]	COVER AS
	2P-2975	[2]	SEAL-O-RING
2.	121-2844	[1]	HARNESS AS-WIRING (CRANK WITHOUT INJECT)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	209-6630	[1]	TAG-INFORMATION
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
3.	140-0860	[1]	STRAP AS-GROUND
4.	145-7028 Y	[1]	SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL)
5.	161-9926 Y	[1]	SENSOR GP-PRESSURE (TURBOCHARGER INLET)
6.	189-5746 Y	[1]	SENSOR GP-SPEED (TORQUE CONVERTER OUTLET)
7.	204-8000	[4]	MOUNTING-CABLE TIE
8.	209-7747	[1]	RECEPTACLE AS (JUMP START)
	1S-4915	[4]	LINER (CONDUIT)
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0695 E		CONDUIT (171-CM)
	5P-0747 E		CABLE (00-GA, BLACK)(106-CM)
	5P-0761 E		CABLE (00-GA, RED)(98-CM)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(32-CM)
	9X-9120	[1]	BOOT (RED)
	9X-9825	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	114-8843 E		SLEEVE-PLASTIC (40-CM)
9.	227-0210	[1]	BRACKET AS
	8Y-4489 M	[1]	BOSS (M10X1.5-THD)
10.	228-7495	[1]	BRACKET AS
11.	236-9857	[1]	PLATE AS
12.	241-4181	[1]	CABLE AS
	1S-4915	[2]	LINER (CONDUIT)
	5P-0695 E		CONDUIT (130-CM)
	8N-0869	[2]	COVER-TERMINAL (RED)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(16-CM)
	159-8047 E		CABLE-ELECTRICAL (0-GA, RED)(150-CM)
	170-3793	[2]	RING-TERMINAL
13.	249-6878	[1]	PLATE AS
14.	265-6978	[1]	BRACKET AS
15.	265-6979	[1]	BRACKET AS
16.	269-5292	[1]	HARNESS AS-ENGINE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	214-4208	[1]	RECEPTACLE AS-CONNECTOR (70-PIN)
17.	273-5696	[1]	BRACKET AS
18.	0S-1594	[2]	BOLT (3/8-16X1-IN)
19.	0S-1619	[2]	BOLT (3/8-16X3-IN)
20.	104-6202	[2]	CLIP (LADDER)
21.	130-5300	[1]	CLIP
22.	132-5789	[2]	CLIP (LADDER)
23.	1D-4706	[2]	BOLT (3/8-16X6-IN)
24.	1V-7753	[2]	SPACER (0.546X0.841X1.75-IN THK)
25.	204-2281	[2]	STRAP-CABLE
26.	3J-7354	[1]	SEAL-O-RING
27.	4P-7428	[3]	CLIP (LADDER)
28.	4P-7581	[1]	CLIP (LADDER)
29.	4P-8134	[2]	CLIP (LADDER)
30.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
31.	6D-4247	[2]	CLIP
32.	6V-1820 M	[2]	BOLT (M10X1.5X30-MM)
33.	6V-5839	[4]	WASHER (11X21X2.5-MM THK)
34.	7K-1181	[34]	STRAP-CABLE
35.	8T-4121	[15]	WASHER-HARD (11X21X2.5-MM THK)
36.	8T-4136 M	[12]	BOLT (M10X1.5X25-MM)
37.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
38.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
39.	8T-4190 M	[2]	BOLT (M16X2X25-MM)
40.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
41.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
42.	9X-8257	[2]	WASHER (17.5X30X3.5-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP44150331

183-7951: WIRING GP-PLATFORM

WIRING GP-PLATFORM

183-7951 WIRING GP-PLATFORM
S/N CMX1-299
PART OF 183-7921 CHASSIS AR

i02405988 SEBP4415

For full view, you need register

Parts for your 583T PIPELAYER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-6328 Y	[1]	ALARM GP (24-VOLT)(ACTION)
2.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
3.	6V-8927	[8]	BOLT-SOCKET HEAD (6-32X0.5-IN)
4.	7K-1181	[36]	STRAP-CABLE
5.	7N-5876	[1]	LAMP (24-VOLT, 0.2-AMPERE)(SPEEDOMETER, TACHOMETER)
5A.	7N-5876	[2]	LAMP (24-VOLT, 0.2-AMPERE)(QUAD GAUGE MODULE)
6.	7X-6396	[1]	SWITCH AS-ROCKER (FRONT FLOODLIGHT)
6A.	7X-6396	[1]	SWITCH AS-ROCKER (REAR FLOODLIGHT)
6B.	7X-6396	[1]	SWITCH AS-ROCKER (BOOM FLOODLIGHT)
			(EACH SWITCH AS INCLUDES)
	3L-8187	[4]	LOCKWASHER
	6V-8374	[4]	SCREW-MACHINE (6-32X0.25-IN)
7.	8T-9655	[8]	MOUNT-ISOLATION
8.	9G-7641 Y	[1]	SWITCH GP-START (ENGINE, KEY)
9.	103-5526 Y	[1]	CONTROL GP-MONITOR (BACKLIGHT DIMMER)
10.	125-4490	[1]	CLIP
11.	158-6632 Y	[1]	SWITCH GP-PUSH BUTTON (HORN)
12.	159-3449	[1]	SOCKET AS (12-VOLT POWER OUTLET)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	163-5403	[1]	HARNESS AS-DASH
	3T-3278	[4]	BOOT
	3T-3158	[4]	SOCKET-LAMP
	3T-3159	[4]	SPRING
	6D-4161	[4]	CONTACT
	162-4171	[8]	TERMINAL AS (18-GA TO 20-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	8T-9834	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6845	[1]	PLUG AS-CONNECTOR (40-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[3]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
14.	209-0381	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
15.	220-7087	[1]	FUSE (125-AMPERE)(ALTERNATOR)
16.	222-7877	[1]	SWITCH AS-ROCKER (24-VOLT)(THROTTLE)
17.	222-7883	[1]	SWITCH AS-ROCKER (24-VOLT)(HYDRAULIC LOCKOUT)
18.	223-8173	[1]	HOLDER AS-FUSE
19.	224-9222	[1]	BRACKET
20.	236-8201	[1]	HARNESS AS-PANEL
	113-0580	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	110-6845	[1]	PLUG AS-CONNECTOR (40-PIN)
	147-1445	[1]	PLUG AS-CONNECTOR (70-PIN)
	147-1446	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2272	[1]	PLUG AS-CONNECTOR (4-PIN)
	155-2255	[3]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
21.	236-8203	[1]	HARNESS AS-DASH (PEDESTAL)
	9X-6772	[2]	STRAP-CABLE
	126-1774	[1]	COVER-CONNECTOR
	113-0580	[2]	RECEPTACLE AS-CONNECTOR (40-PIN)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2272	[2]	PLUG AS-CONNECTOR (4-PIN)
	110-6845	[1]	PLUG AS-CONNECTOR (40-PIN)
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
22.	236-8206	[1]	PLATE AS
	241-4182	[1]	PLATE
	6V-6716	[2]	RIVET-TRUSS HEAD
	7T-1099	[5]	LINK
	109-1645	[1]	CLIP
23.	239-1409	[1]	COVER AS
	5P-5677 D		WIRE (18-GA, BLACK)(0.2-M)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
24.	240-9615 Y	[1]	WIRING GP-CONSOLE
25.	246-4311	[1]	GUARD (SWITCH)
26.	262-1408	[1]	CONTROL GP-UNPROGRAMMED (POWER TRAIN)
27.	276-1883	[1]	PLUG AS-CODE (MONITOR)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	9G-3695	[3]	PLUG-SEAL
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
28.	281-1632	[1]	HARNESS AS-SENSOR (DECELERATOR PEDAL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
29.	285-0367	[1]	RETAINER
30.	285-1204	[1]	RETAINER
31.	285-8641	[2]	COVER
32.	287-7532	[1]	HARNESS AS-WIRING
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
33.	150-4086 M	[4]	SCREW (M4X0.7X16-MM)
34.	096-2618 M	[4]	SCREW-MACHINE (M5X0.8X18-MM)
35.	103-1107	[2]	SCREW-MACHINE (6-32X0.87-IN)
36.	132-5789	[2]	CLIP (LADDER)(LADDER)
37.	151-4977	[6]	WASHER (4.445X9.525X1.092-MM THK)
38.	2D-0388	[1]	GROMMET (25.4-MM ID)
39.	3K-5178	[1]	GROMMET
40.	3T-0851 M	[4]	LOCKNUT (M5X0.8-THD)
41.	4B-4863	[4]	WASHER (4.7X11X1.2-MM THK)
42.	6T-6066	[1]	SWITCH AS-ROCKER (OPERATOR)
	3L-8187	[2]	LOCKWASHER
	6V-8374	[2]	SCREW-MACHINE (6-32X0.25-IN)
43.	7D-6922	[2]	LOCKNUT (6-32-THD)
44.	7X-0818 M	[4]	BOLT (M8X1.25X45-MM)
45.	7X-2534 M	[2]	BOLT (M6X1X50-MM)
46.	7X-2620 M	[2]	BOLT (M8X1.25X10-MM)
47.	7Y-3173 M	[2]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
48.	153-9301 M	[4]	BOLT-SOCKET HEAD (M4X0.7X10-MM)
49.	8T-0328	[4]	WASHER-HARD (5.5X10X1-MM THK)
50.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
51.	8T-4133 M	[2]	NUT (M10X1.5-THD)
52.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
53.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
54.	8T-4138 M	[3]	BOLT (M6X1X20-MM)
55.	8T-4200 M	[2]	BOLT (M8X1.25X16-MM)
56.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
57.	8Y-8606	[1]	GROMMET
58.	9N-0869	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
59.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
60.	7X-7877 E		STRIP-EDGE (10-CM)
60A.	7X-7877 E		STRIP-EDGE (25-CM)
60B.	7X-7877 E		STRIP-EDGE (40-CM)
61.	8T-4205	[3]	WASHER-HARD (7.2X14.5X2-MM THK)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP44150332

183-7951: WIRING GP-PLATFORM

WIRING GP-PLATFORM

183-7951 WIRING GP-PLATFORM
S/N CMX300-537
PART OF 183-7921 CHASSIS AR

i02965870 SEBP4415

For full view, you need register

Parts for your 583T PIPELAYER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-6328 Y	[1]	ALARM GP (24-VOLT)(ACTION)
2.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
3.	6V-8927	[8]	BOLT-SOCKET HEAD (6-32X0.5-IN)
4.	7K-1181	[36]	STRAP-CABLE
5.	7N-5876 C	[2]	LAMP (24-VOLT, 0.2-AMPERE)(SPEEDOMETER, TACHOMETER)
5A.	7N-5876	[2]	LAMP (24-VOLT, 0.2-AMPERE)(QUAD GAUGE MODULE)
6.	7X-6396	[1]	SWITCH AS-ROCKER (FRONT FLOODLIGHT)
6A.	7X-6396	[1]	SWITCH AS-ROCKER (REAR FLOODLIGHT)
6B.	7X-6396	[1]	SWITCH AS-ROCKER (BOOM FLOODLIGHT)
			(EACH SWITCH AS INCLUDES)
	3L-8187	[4]	LOCKWASHER
	6V-8374	[4]	SCREW-MACHINE (6-32X0.25-IN)
7.	8T-9655	[8]	MOUNT-ISOLATION
8.	9G-7641 Y	[1]	SWITCH GP-START (ENGINE, KEY)
9.	103-5526 Y	[1]	CONTROL GP-MONITOR (BACKLIGHT DIMMER)
10.	125-4490	[1]	CLIP
11.	158-6632 Y	[1]	SWITCH GP-PUSH BUTTON (HORN)
12.	159-3449	[1]	SOCKET AS (12-VOLT POWER OUTLET)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	163-5403	[1]	HARNESS AS-DASH
	3T-3278	[4]	BOOT
	3T-3158	[4]	SOCKET-LAMP
	3T-3159	[4]	SPRING
	6D-4161	[4]	CONTACT
	162-4171	[8]	TERMINAL AS (18-GA TO 20-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	8T-9834	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6845	[1]	PLUG AS-CONNECTOR (40-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[3]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
14.	209-0381	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
15.	220-7087	[1]	FUSE (125-AMPERE)(ALTERNATOR)
16.	222-7877	[1]	SWITCH AS-ROCKER (24-VOLT)(THROTTLE)
17.	222-7883	[1]	SWITCH AS-ROCKER (24-VOLT)(HYDRAULIC LOCKOUT)
18.	223-8173	[1]	HOLDER AS-FUSE
19.	224-9222	[1]	BRACKET
20.	318-4273 C	[1]	HARNESS AS-PLATFORM
21.	318-4274 C	[1]	HARNESS AS-DASH
22.	236-8206	[1]	PLATE AS
	241-4182	[1]	PLATE
	6V-6716	[2]	RIVET-TRUSS HEAD
	7T-1099	[5]	LINK
	109-1645	[1]	CLIP
23.	239-1409	[1]	COVER AS
	5P-5677 D		WIRE (18-GA, BLACK)(0.2-M)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
24.	240-9615 Y	[1]	WIRING GP-CONSOLE
25.	246-4311	[1]	GUARD (SWITCH)
26.	304-5687	[1]	CONTROL GP-UNPROGRAMMED (POWERTRAIN)
27.	276-1883	[1]	PLUG AS-CODE (MONITOR)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	9G-3695	[3]	PLUG-SEAL
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
28.	281-1632	[1]	HARNESS AS-SENSOR (DECELERATOR PEDAL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
29.	285-0367	[1]	RETAINER
30.	285-1204	[1]	RETAINER
31.	285-8641	[2]	COVER
32.	287-7532	[1]	HARNESS AS-WIRING
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
33.	150-4086 M	[4]	SCREW (M4X0.7X16-MM)
34.	096-2618 M	[4]	SCREW-MACHINE (M5X0.8X18-MM)
35.	103-1107	[2]	SCREW-MACHINE (6-32X0.87-IN)
36.	132-5789	[2]	CLIP (LADDER)(LADDER)
37.	151-4977	[6]	WASHER (4.445X9.525X1.092-MM THK)
38.	2D-0388	[1]	GROMMET (25.4-MM ID)
39.	3K-5178	[1]	GROMMET
40.	3T-0851 M	[4]	LOCKNUT (M5X0.8-THD)
41.	4B-4863	[4]	WASHER (4.7X11X1.2-MM THK)
42.	6T-6066	[1]	SWITCH AS-ROCKER (OPERATOR)
	3L-8187	[2]	LOCKWASHER
	6V-8374	[2]	SCREW-MACHINE (6-32X0.25-IN)
43.	7D-6922	[2]	LOCKNUT (6-32-THD)
44.	7X-0818 M	[4]	BOLT (M8X1.25X45-MM)
45.	7X-2534 M	[2]	BOLT (M6X1X50-MM)
46.	7X-2620 M	[2]	BOLT (M8X1.25X10-MM)
47.	7Y-3173 M	[2]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
48.	153-9301 M	[4]	BOLT-SOCKET HEAD (M4X0.7X10-MM)
49.	8T-0328	[4]	WASHER-HARD (5.5X10X1-MM THK)
50.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
51.	8T-4133 M	[2]	NUT (M10X1.5-THD)
52.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
53.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
54.	8T-4138 M	[3]	BOLT (M6X1X20-MM)
55.	8T-4200 M	[2]	BOLT (M8X1.25X16-MM)
56.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
57.	8Y-8606	[1]	GROMMET
58.	9N-0869	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
59.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
60.	7X-7877 E		STRIP-EDGE (10-CM)
60A.	7X-7877 E		STRIP-EDGE (25-CM)
60B.	7X-7877 E		STRIP-EDGE (40-CM)
61.	8T-4205	[3]	WASHER-HARD (7.2X14.5X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP44150333

183-7951: WIRING GP-PLATFORM

WIRING GP-PLATFORM

183-7951 WIRING GP-PLATFORM
S/N CMX538-UP
PART OF 183-7921 CHASSIS AR

i03898946 SEBP4415

For full view, you need register

Parts for your 583T PIPELAYER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-6328 Y	[1]	ALARM GP (24-VOLT)(ACTION)
2.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
3.	6V-8927	[8]	BOLT-SOCKET HEAD (6-32X0.5-IN)
4.	7K-1181 C	[35]	STRAP-CABLE
5.	7N-5876	[2]	LAMP (24-VOLT, 0.2-AMPERE)(SPEEDOMETER, TACHOMETER)
5A.	7N-5876	[2]	LAMP (24-VOLT, 0.2-AMPERE)(QUAD GAUGE MODULE)
6.	7X-6396	[1]	SWITCH AS-ROCKER (FRONT FLOODLIGHT)
6A.	7X-6396	[1]	SWITCH AS-ROCKER (REAR FLOODLIGHT)
6B.	7X-6396	[1]	SWITCH AS-ROCKER (BOOM FLOODLIGHT)
			(EACH SWITCH AS INCLUDES)
	3L-8187	[4]	LOCKWASHER
	6V-8374	[4]	SCREW-MACHINE (6-32X0.25-IN)
7.	8T-9655	[8]	MOUNT-ISOLATION
8.	9G-7641 Y	[1]	SWITCH GP-START (ENGINE, KEY)
9.	103-5526 Y	[1]	CONTROL GP-MONITOR (BACKLIGHT DIMMER)
10.	125-4490	[1]	CLIP
11.	158-6632 Y	[1]	SWITCH GP-PUSH BUTTON (HORN)
12.	159-3449	[1]	SOCKET AS (12-VOLT POWER OUTLET)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	163-5403	[1]	HARNESS AS-DASH
	3T-3278	[4]	BOOT
	3T-3158	[4]	SOCKET-LAMP
	3T-3159	[4]	SPRING
	6D-4161	[4]	CONTACT
	162-4171	[8]	TERMINAL AS (18-GA TO 20-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-9834	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6845	[1]	PLUG AS-CONNECTOR (40-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[3]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
14.	209-0381	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
16.	222-7877	[1]	SWITCH AS-ROCKER (24-VOLT)(THROTTLE)
17.	222-7883	[1]	SWITCH AS-ROCKER (24-VOLT)(HYDRAULIC LOCKOUT)
19.	224-9222	[1]	BRACKET
20.	352-5720 C	[1]	HARNESS AS-PLATFORM
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	110-6845	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6844	[1]	SEAL
	7K-1181	[4]	STRAP-CABLE
	8T-8729	[35]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[34]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[3]	PLUG-SEAL
	9G-3695	[79]	PLUG-SEAL
	9W-0844	[13]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9W-0852	[9]	PIN-CONNECTOR (14-GA TO 16-GA)
	113-0580	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	114-8843 E		SLEEVE-PLASTIC (260-CM)
	E		SLEEVE-PLASTIC (80-CM)
	114-8845 E		SLEEVE-PLASTIC (40-CM)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(52-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(65-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(40-CM)
	126-1766	[115]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	126-1768	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1774	[2]	COVER-CONNECTOR
	2L-8069	[3]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	144-1636	[12]	PIN-CONNECTOR (14-GA TO 18-GA)
	147-1445	[1]	PLUG AS-CONNECTOR (70-PIN)
	147-1446	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2255	[3]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	185-1860	[17]	SEAL-WIRE
	245-7434	[2]	KIT-CONNECTING PLUG (10-PIN)
			(EACH KIT INCLUDES PLUG CONNECTOR, WIRE ASSEMBLIES & PLUGS)
21.	352-5721 C	[1]	HARNESS AS-DASH (PEDESTAL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	3E-6286	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6844	[1]	SEAL
	8N-1545	[1]	SOCKET-CONNECTOR (8-GA)
	9G-3695	[59]	PLUG-SEAL
	9X-6772	[2]	STRAP-CABLE
	113-0580	[2]	RECEPTACLE AS-CONNECTOR (40-PIN)
	114-8843 E		SLEEVE-PLASTIC (240-CM)
	114-8845 E		SLEEVE-PLASTIC (60-CM)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(46-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
	126-1766	[73]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	126-1767	[25]	PIN-CONNECTOR (14-GA TO 16-GA)
	126-1768	[15]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1774	[1]	COVER-CONNECTOR
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	131-1488	[1]	TERMINAL AS-RING (6-GA TO 8-GA)
	2L-8069	[3]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	144-1636	[41]	PIN-CONNECTOR (14-GA TO 18-GA)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
22.	236-8206	[1]	PLATE AS
	241-4182	[1]	PLATE
	6V-6716	[2]	RIVET-TRUSS HEAD
	7T-1099	[5]	LINK
	109-1645	[1]	CLIP
24.	240-9615 Y	[1]	WIRING GP-CONSOLE
25.	246-4311	[1]	GUARD (SWITCH)
26.	304-5687	[1]	CONTROL GP-UNPROGRAMMED (POWERTRAIN)
27.	276-1883	[1]	PLUG AS-CODE (MONITOR)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	9G-3695	[3]	PLUG-SEAL
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
28.	281-1632	[1]	HARNESS AS-SENSOR (DECELERATOR PEDAL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	114-8843 E		SLEEVE-PLASTIC (40-CM)
	126-1766	[3]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	144-1636	[3]	PIN-CONNECTOR (14-GA TO 18-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
29.	285-0367	[1]	RETAINER
30.	285-1204	[1]	RETAINER
31.	285-8641	[2]	COVER
33.	150-4086 M	[4]	SCREW (M4X0.7X16-MM)
34.	096-2618 M	[4]	SCREW-MACHINE (M5X0.8X18-MM)
35.	103-1107	[2]	SCREW-MACHINE (6-32X0.87-IN)
36.	132-5789	[2]	CLIP (LADDER)(LADDER)
37.	151-4977	[6]	WASHER (4.445X9.525X1.092-MM THK)
38.	2D-0388	[1]	GROMMET (25.4-MM ID)
39.	3K-5178	[1]	GROMMET
40.	3T-0851 M	[4]	LOCKNUT (M5X0.8-THD)
41.	4B-4863	[4]	WASHER (4.7X11X1.2-MM THK)
42.	6T-6066	[1]	SWITCH AS-ROCKER (OPERATOR)
	3L-8187	[2]	LOCKWASHER
	6V-8374	[2]	SCREW-MACHINE (6-32X0.25-IN)
43.	7D-6922	[2]	LOCKNUT (6-32-THD)
44.	7X-0818 M	[4]	BOLT (M8X1.25X45-MM)
45.	7X-2534 M	[2]	BOLT (M6X1X50-MM)
47.	7Y-3173 M	[2]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
48.	153-9301 M	[4]	BOLT-SOCKET HEAD (M4X0.7X10-MM)
49.	8T-0328 C	[8]	WASHER-HARD (5.5X10X1-MM THK)
50.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
51.	8T-4133 M	[2]	NUT (M10X1.5-THD)
52.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
53.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
54.	8T-4138 M	[3]	BOLT (M6X1X20-MM)
56.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
57.	8Y-8606	[1]	GROMMET
58.	9N-0869	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
59.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
60.	7X-7877 E		STRIP-EDGE (10-CM)
60A.	7X-7877 E		STRIP-EDGE (25-CM)
60B.	7X-7877 E		STRIP-EDGE (40-CM)
61.	8T-4205	[3]	WASHER-HARD (7.2X14.5X2-MM THK)
62.	352-5776 C	[1]	PLATE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP44150334

257-4183: WIRING GP-UNIT INJECTOR

WIRING GP-UNIT INJECTOR

257-4183 WIRING GP-UNIT INJECTOR
S/N CMX1-UP
FOR USE AS SERVICE REPAIR FOR INJECTOR HARNESSES WITH THE 7E-6513 CONNECTOR
FIELD INSTALLATION

i02170491 SEBP4415

2574183 WIRING GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your 583T PIPELAYER:

CATERPILLAR SIS

Part No	Qty	Parts name
7E-6513 F	[1]	CONNECTOR AS
091-7473 F	[2]	SPLICE-WIRE
F		NOT SHOWN

#SEBP44150335

1Q-3056: AXLE GP

AXLE GP

1Q-3056 AXLE GP
S/N CMX1-UP
LOW GROUND PRESSURE
PART OF 183-7923 POWER TRAIN AR

i00353192 SEBP4415

For full view, you need register

Parts for your 583T PIPELAYER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1Q-3059	[1]	SHAFT AS
2.	8E-0618	[1]	BEARING-THRUST
3.	3T-5851	[1]	SHAFT (FINAL DRIVE, CENTER)
4.	1Q-3057	[1]	SHAFT AS
5.	8E-0618	[1]	BEARING-THRUST

#SEBP44150336

323-3591: BODY AS-OIL PUMP

BODY AS-OIL PUMP

323-3591 BODY AS-OIL PUMP
S/N CMX121-UP
PART OF 286-0271 PUMP GP-GEAR

i02953658 SEBP4415

For full view, you need register

Parts for your 583T PIPELAYER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	187-0671	[1]	BUSHING
2.	9X-7378	[2]	SEAL-O-RING
3.	209-0792	[1]	BUSHING
4.	1M-3780	[1]	BUSHING
5.	5M-4987	[4]	DOWEL
6.	9S-8002	[2]	PLUG (7/16-20-THD)

#SEBP44150337

239-0774: BRAKE & DIFFERENTIAL DRIVE GP

BRAKE & DIFFERENTIAL DRIVE GP

239-0774 BRAKE & DIFFERENTIAL DRIVE GP
S/N CMX1-UP
PART OF 183-7923 POWER TRAIN AR

i02406796 SEBP4415

2390774 BRAKE & DIFFERENTIAL DRIVE GP Parts scheme

For full view, you need register

Parts for your 583T PIPELAYER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2K-5069	[1]	CUP-BEARING (TAPERED ROLLER)
2.	2K-9295	[1]	BEARING AS-TAPERED ROLLER
3.	3B-4124	[1]	CUP-BEARING (TAPERED ROLLER)
4.	3S-2708	[7]	PIN-SPRING
5.	3T-4568	[3]	SHAFT-PLANETARY
6.	292-2016	[1]	GEAR AS-SUN (30/24-TEETH)
6A.	290-9849	[1]	RING-RETAINING
7.	3T-4824	[4]	GEAR-PLANETARY (30-TEETH)
8.	3T-5021	[1]	CARRIER-PLANETARY
9.	3T-5200	[1]	CARRIER-PLANETARY
10.	3T-6963	[1]	SEAL-RING
11.	3T-9272 B	[1]	SHIM PACK (INCLUDES 8-SHIMS)
12.	5M-0578	[3]	BEARING AS-ROLLER
13.	5M-7925	[4]	BEARING AS-ROLLER
14.	6I-8724	[1]	RING-LOCK
15.	6P-1735	[1]	LOCKWASHER
16.	6P-1736	[1]	WASHER (55.17X76.2X2.67-MM THK)
17.	6T-0062	[1]	PLATE
18.	6T-0064	[4]	SHAFT-PLANETARY
19.	6T-0850	[2]	WASHER-THRUST (255X287.25X2.75-MM THK)
20.	6V-0855	[1]	BEARING AS-TAPERED ROLLER
	8T-0072	[1]	CONE-BEARING
21.	6V-7646	[3]	WASHER-HARD (7.2X25X2-MM THK)
22.	6Y-0926	[3]	GEAR-PLANETARY (23-TEETH)
23.	6Y-0984	[1]	GEAR-RING (75-TEETH)
24.	6Y-2704	[1]	SPRING-DISC
25.	6Y-3982	[1]	CARRIER
26.	6Y-9373	[4]	DISC-FRICTION
27.	7G-1596	[1]	RING-RETAINING
28.	7H-4566	[2]	CUP-BEARING (TAPERED ROLLER)
29.	7T-1885	[1]	RING
30.	7T-6994	[3]	PLATE-CLUTCH & BRAKE
31.	7T-8130	[1]	RING-RETAINING
32.	7T-9788	[1]	HUB
33.	7T-9832	[1]	RETAINER
34.	7T-9837	[1]	PLATE
35.	8E-8307	[6]	DISC-THRUST
36.	8E-8310	[8]	DISC-THRUST
37.	9B-0576	[1]	LOCKNUT-BEARING
38.	9W-1571	[1]	SLINGER
39.	9W-2853 B	[1]	SHIM PACK (INCLUDES 21-SHIMS)
42.	9W-6102	[1]	GEAR-RING (84-TEETH)
43.	9W-6103	[1]	RING-THRUST
44.	005-4834	[2]	BEARING AS-TAPERED ROLLER
45.	103-0870	[1]	PINION-BEVEL (27-TEETH)
46.	103-0871	[1]	GEAR-BEVEL (97-TEETH)
47.	214-3573	[1]	PISTON
48.	227-2451	[1]	HOUSING AS
48A.	1A-2223	[2]	DOWEL
48B.	1A-1460	[12]	BOLT (1/2-13X2-IN)
48C.	5P-8245	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
49.	240-0607	[1]	RETAINER
50.	030-2135	[4]	BOLT-LOCKING (5/16-18X0.625-IN)
51.	0L-1143	[21]	BOLT (3/8-16X2.5-IN)
52.	0S-1614	[3]	BOLT (1/4-20X0.5-IN)
53.	136-1596	[1]	HOUSING-ROTATING
54.	1A-2029	[6]	BOLT (3/8-16X1.125-IN)
55.	2A-4639	[1]	BOLT (3/8-16X1.625-IN)
56.	1A-1460	[6]	BOLT (1/2-13X2-IN)
57.	3K-0360	[2]	SEAL-O-RING
58.	5K-9107	[3]	BOLT-LOCKING (3/8-16X0.75-IN)
59.	5M-2894	[7]	WASHER-HARD (10.2X18.5X2.5-MM THK)
60.	5P-8245	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
61.	6P-5317	[1]	RING-SEAL (EXTERNAL)
62.	7W-6534	[4]	PLUG-PIPE
63.	8M-4438	[1]	SEAL-O-RING
64.	8P-8357	[1]	RING-SEAL (INTERNAL)
65.	9L-9132	[3]	WASHER (10.2X25.5X2.5-MM THK)
66.	9S-8005	[2]	PLUG (3/4-16-THD)
67.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED

#SEBP44150338

239-0775: BRAKE & PLANETARY GP

BRAKE & PLANETARY GP

239-0775 BRAKE & PLANETARY GP
S/N CMX1-UP
PART OF 183-7923 POWER TRAIN AR

i02406837 SEBP4415

2390775 BRAKE & PLANETARY GP Parts scheme

For full view, you need register

Parts for your 583T PIPELAYER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2708	[3]	PIN-SPRING
2.	3T-5807	[1]	SLINGER
3.	5M-0578	[6]	BEARING AS-ROLLER
4.	6Y-2704	[1]	SPRING-DISC
5.	6Y-9373	[4]	DISC-FRICTION
6.	7T-1885	[1]	RING
7.	7T-6994	[3]	PLATE-CLUTCH & BRAKE
8.	7T-8136	[3]	SHAFT-PLANETARY
9.	7T-9837	[1]	PLATE
10.	8E-4051	[1]	HUB-BRAKE
11.	303-8804	[1]	GEAR-RING (75-TEETH)
12.	8E-8307	[6]	DISC-THRUST
13.	9W-7925	[2]	BEARING AS-TAPERED ROLLER
14.	9W-7926	[2]	CUP-BEARING
15.	244-2310	[3]	GEAR-PLANETARY (23-TEETH)
16.	306-0278	[1]	GEAR AS-SUN (30-TEETH)
	3E-4354	[2]	BALL
17.	205-5314	[1]	HOUSING
18.	209-7193	[1]	CARRIER
19.	214-3573	[1]	PISTON
20.	240-0613	[1]	RETAINER AS
21.	0S-1585	[12]	BOLT (1/2-13X1.5-IN)
22.	1A-1460	[6]	BOLT (1/2-13X2-IN)
23.	1A-2029	[6]	BOLT (3/8-16X1.125-IN)
24.	1C-0569	[6]	BOLT (5/16-18X0.5-IN)
25.	3K-0360	[2]	SEAL-O-RING
26.	3W-1852	[1]	RING-RETAINING
27.	5M-2894	[6]	WASHER-HARD (10.2X18.5X2.5-MM THK)
28.	5P-8245	[18]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	6P-5317	[1]	RING-SEAL (EXTERNAL)
30.	8M-4438	[1]	SEAL-O-RING
31.	8P-8357	[1]	RING-SEAL (INTERNAL)
32.	9S-8005	[2]	PLUG (3/4-16-THD)
33.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED

#SEBP44150339

210-0084: CASE & PARTS GP-PLANETARY

CASE & PARTS GP-PLANETARY

210-0084 CASE & PARTS GP-PLANETARY
S/N DZH1-6182
PART OF 209-5636 TRANSMISSION AR

i01959716 SEBP4415

2100084 CASE & PARTS GP-PLANETARY Parts scheme

For full view, you need register

Parts for your 583T PIPELAYER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5K-5120	[1]	STRIP
2.	5K-9246	[1]	CONNECTOR
3.	5K-9988	[1]	TEE-INVERTED FLARED
4.	6K-8498	[1]	TEE-FLARED
5.	6V-0852	[7]	CAP-DUST
6.	6V-1720	[1]	PLATE-SERIAL NUMBER (TRANSMISSION)
7.	164-5567	[7]	COUPLER AS-QUICK DISCONNECT (MALE)
			(EACH INCLUDES)
	6V-3965	[1]	FITTING (QUICK DISCONNECT)
	3J-1907	[1]	SEAL-O-RING
8.	7T-8875	[1]	TUBE AS
9.	7T-8876	[1]	TUBE AS
10.	8S-9130	[1]	SCREEN-SUCTION (TRANSMISSION SCAVENGE)
11.	9G-8615	[1]	COVER
12.	9P-1475	[1]	SLEEVE
13.	9S-7710	[1]	ELBOW-FLARED
14.	9W-4159	[1]	TUBE AS
15.	9W-5334	[1]	TUBE AS
16.	081-8353	[3]	BOLT (3/8-16X0.625-IN)
17.	106-4150 Y	[1]	DRAIN GP-ECOLOGY (TRANSMISSION CASE)
18.	160-8742 M	[4]	BOLT (M10X1.5X55-MM)
19.	190-2278 Y	[1]	CASE GP-TRANSMISSION
20.	203-2288	[1]	GASKET-COVER
21.	204-6499	[1]	COVER
22.	210-0091	[1]	COVER
23.	214-9408	[1]	MANIFOLD
24.	216-6202	[1]	ADAPTER
25.	221-0877	[1]	GUARD AS
26.	031-0218	[1]	BOLT-LOCKING (3/8-16X0.5-IN)
27.	0S-1585	[21]	BOLT (1/2-13X1.5-IN)
28.	0T-0102	[1]	BOLT (3/8-16X0.625-IN)
29.	2M-9780	[1]	SEAL-O-RING
30.	2S-4071	[1]	SEAL-O-RING
33.	5M-2894	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
34.	5P-4057	[1]	SEAL-O-RING
35.	5P-8245	[21]	WASHER-HARD (13.5X25.5X3-MM THK)
36.	5P-8998	[1]	FITTING
37.	6L-9965	[1]	SEAL-O-RING
38.	7J-8611	[1]	ELBOW-PIPE
39.	8H-1603	[1]	CLIP
40.	8M-2530	[4]	BOLT-12 POINT HEAD (1/2-13X1.25-IN)
41.	8M-4432	[2]	SEAL-O-RING
42.	8M-5661	[1]	SEAL-O-RING
43.	8P-0058	[1]	GASKET-COVER
44.	8T-6762	[1]	PLUG-PIPE (1/2-14-THD)
45.	9M-9647	[2]	SEAL-O-RING
46.	164-5616	[3]	PLUG AS
			(EACH INCLUDES)
46A.	2S-4078	[1]	SEAL-O-RING
	9S-6130	[1]	PLUG
47.	9X-2125 M	[23]	BOLT-LOCKING (M10X1.5X25-MM)
48.	162-6448	[1]	PLUG AS
	1N-5999	[1]	PLUG-O-RING
	7J-0204	[1]	SEAL-O-RING
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery - Inspect
583T Pipelayer

Battery - Recycle
583T Pipelayer

Battery or Battery Cable - Replace
583T Pipelayer

Battery Disconnect Switch
583T Pipelayer

Fuses and Circuit Breakers - Replace/Reset
583T Pipelayer

Engine Starting with Auxiliary Start Receptacle
583T Pipelayer

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Testing the Refrigerant Compressor Protection Module{1408, 1802}
Testing the Refrigerant Compressor Protection Module{1408, 1802}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation of the White Noise Back Up Alarms {7406}
Installation of the White Noise Back Up Alarms {7406}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT SUPPORT PROGRAM FOR REWORKING THE STEERING CONTROL ON CERTAIN D8T AND D9T TRACK-TYPE TRACTORS AND 583T PIPELAYERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE STEERING CONTROL ON CERTAIN D8T AND D9T TRACK-TYPE TRACTORS AND 583T PIPELAYERS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Technical Information Bulletin

Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}

Specifications

Electrical Ground Stud
C15 and C18 Engines for Caterpillar Built Machines

Electronic Control Wiring Group
C15 and C18 Engines for Caterpillar Built Machines

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Systems Operation

Action Alarm
583T, 587T, PL83 and PL87 Pipelayers Caterpillar Monitoring System

Action Lamp
583T, 587T, PL83 and PL87 Pipelayers Caterpillar Monitoring System

Sensors
583T, 587T, PL83 and PL87 Pipelayers Caterpillar Monitoring System

Switches
583T, 587T, PL83 and PL87 Pipelayers Caterpillar Monitoring System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Testing and Adjusting

Electric Starting System - Test
C15 and C18 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C15 and C18 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 0338 FMI 05 Pre-Lube Relay open circuit
C15 and C18 Engines for Caterpillar Built Machines

CID 0338 FMI 06 Pre-Lube Relay short to ground
C15 and C18 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C15 and C18 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 1076 FMI 05 Engine Cooling Fan Bypass Solenoid open circuit
C15 and C18 Engines for Caterpillar Built Machines

CID 1076 FMI 06 Engine Cooling Fan Bypass Solenoid short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C15 and C18 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
C15 and C18 Engines for Caterpillar Built Machines

CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
C15 and C18 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C15 and C18 Engines for Caterpillar Built Machines

CID 0485 FMI 05 Engine Fan Rev Solenoid open circuit
C15 and C18 Engines for Caterpillar Built Machines

CID 0485 FMI 06 Engine Fan Rev Solenoid short to ground
C15 and C18 Engines for Caterpillar Built Machines

Wiring Harness (Short Circuit) - Test
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

Wiring Harness (Open Circuit) - Test
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

Electrical Connector - Inspect
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C15 and C18 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C15 and C18 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C15 and C18 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C15 and C18 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C15 and C18 Engines for Caterpillar Built Machines

Decelerator Position Sensor Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

Engine Fan Reversing Solenoid Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C15 and C18 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C15 and C18 Engines for Caterpillar Built Machines

MID 113 - CID 0177 - FMI 03
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

MID 113 - CID 0177 - FMI 04
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

MID 113 - CID 0826 - FMI 03
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

MID 113 - CID 0826 - FMI 04
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

Engine Cooling Fan Bypass Solenoid Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

CID 0091 FMI 02 Incorrect Throttle Switch inputs
C15 and C18 Engines for Caterpillar Built Machines

CID 0264 FMI 08 Decel Throttle Position signal abnormal
C15 and C18 Engines for Caterpillar Built Machines

Coolant Flow Switch Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
C15 and C18 Engines for Caterpillar Built Machines

Engine Wiring Information
C15 and C18 Engines for Caterpillar Built Machines

MID 113 - CID 0650 - FMI 02
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

MID 113 - CID 0650 - FMI 12
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

Connector Locations
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

Connector Contact Description
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

MID 113 - CID 0096 - FMI 03
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

MID 113 - CID 0096 - FMI 04
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

MID 113 - CID 0490 - FMI 02
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

MID 113 - CID 0490 - FMI 03
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

MID 113 - CID 0490 - FMI 04
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

MID 113 - CID 1329 - FMI 02
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

MID 113 - CID 1330 - FMI 02
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

CID 1937 FMI 02 Engine Coolant Flow Switch incorrect
C15 and C18 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C15 and C18 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C15 and C18 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C15 and C18 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C15 and C18 Engines for Caterpillar Built Machines

CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C15 and C18 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C15 and C18 Engines for Caterpillar Built Machines

CID 2131 FMI 03 5 Volt Sensor DC Power Supply #2 voltage above normal
C15 and C18 Engines for Caterpillar Built Machines

CID 2131 FMI 04 5 Volt Sensor DC Power Supply #2 voltage below normal
C15 and C18 Engines for Caterpillar Built Machines

MID 113 - CID 0672 - FMI 02
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

MID 113 - CID 0298 - FMI 02
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Correction to Service Magazine , "An Improved Parking Brake Switch Is Now Used" {7332}
2009/09/21

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

An Improved Wiring Harness For The Transmission Is Now Available {1408, 3104}
2007/10/08

A New Harness is Now Used {1120, 1408}
2008/02/25

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

A New Orifice Adapter For the Fan Pump Pressure Sensor Is Now Used {1408}
2008/09/08

An Improved Backup Alarm is Now Available {7406}
2009/01/26

Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2010/10/25

Routing For the Wiring Harness For the 237-0160 Steering Clutch and Brake Control Has Been Improved On Certain Pipelayers and Track-Type Tractors {1408}
2009/11/11

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}

Caterpillar Parts SIS Catalog 583T :

354-0043 WIRING GP-ELECTRONIC CONTROL

236-6223 WIRING GP-ELECTRONIC CONTROL

240-9615 WIRING GP-CONSOLE

307-6571 WIRING GP-CAB

183-7951 WIRING GP-PLATFORM

257-4183 WIRING GP-UNIT INJECTOR

1Q-3056 AXLE GP

323-3591 BODY AS-OIL PUMP

239-0774 BRAKE & DIFFERENTIAL DRIVE GP

239-0775 BRAKE & PLANETARY GP

Truck sale:

2008 CAT 583T

Techint International Construction
Argentina