238-1570 WIRING GP-REFUELING PUMP S/N KDG1-UP; AZP1-UP; SCR1-UP; CYW1-UP PART OF 229-1784 PUMP AR-FUEL TRANSFER Type 1 AN ATTACHMENT 325D L

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 238-1570 WIRING GP-
1. 238-1570 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

2. 227-6115 DRIVE GP-F
3. 227-6116 DRIVE GP-F
4. 267-6796 DRIVE GP-F
5. 267-6877 DRIVE GP-F
6. 333-2909 DRIVE GP-F
7. 333-2921 DRIVE GP-F
8. 333-2982 DRIVE GP-F
9. 353-0493 DRIVE GP-F
0. INFORMATION

EXCAVATOR 325D L EXCAVATOR AZP
325D & 325D L Excavators AZP00001-UP (MACHINE) POWERED BY C7 Engine SEBP4417 325D L AZP (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

342-3039 WIRING GP-QUICK COUPLER

283-2913 WIRING GP-RADIO

238-1570 WIRING GP-REFUELING PUMP

#SEBP44170450

238-1570: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N KDG1-UP; AZP1-UP; SCR1-UP; CYW1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 1
AN ATTACHMENT

i02213964 SEBP4417

2381570 WIRING GP-REFUELING PUMP Parts scheme

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	9X-3495	[1]	CLIP AS
3.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
3A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
4.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
5.	238-1579	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	238-1593	[1]	WIRE AS
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
9.	096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
10.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
11.	8T-0328	[3]	WASHER-HARD (5.5X10X1-MM THK)
12.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
15.	275-6993	[1]	COVER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP44170451

238-1570: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N KDG1-UP; AZP1-UP; SCR1-UP; CYW1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 2
AN ATTACHMENT

i03087780 SEBP4417

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	9X-3495	[1]	CLIP AS
3.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
3A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
4.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
5.	238-1579	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	319-1335 C	[1]	HARNESS AS-WIRING
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
9.	096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
10.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
11.	8T-0328 C	[2]	WASHER-HARD (5.5X10X1-MM THK)
12.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
15.	275-6993	[1]	COVER
16.	7K-1181 C	[11]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP44170452

227-6115: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6115 DRIVE GP-FINAL -WITH TRAVEL MOTOR
S/N KDG1-217; AZP1-UP; SCR1-775; CYW1-UP
PART OF 171-9410 POWER TRAIN AR

i02117212 SEBP4417

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	227-6116 Y	[1]	DRIVE GP-FINAL
2.	204-2674 Y	[1]	MOTOR & MTG GP-TRAVEL
	Y		SEPARATE ILLUSTRATION

#SEBP44170453

227-6116: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6116 DRIVE GP-FINAL -WITHOUT MOTOR
S/N KDG1-217; AZP1-UP; SCR1-775; CYW1-UP
PART OF 227-6115 DRIVE GP-FINAL

i02117236 SEBP4417

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE
2.	094-0578 B	[1]	PLATE (8-MM THK)
3.	094-0579 B	[1]	PLATE (9-MM THK)
4.	094-0580 B	[1]	PLATE (10-MM THK)
5.	094-1528	[12]	WASHER (53X84X1-MM THK)
6.	168-8452 J	[2]	BALL BEARING
7.	169-5585 J	[1]	HOUSING
8.	169-5589	[1]	GEAR-SUN (24-TEETH)
9.	169-5590	[1]	GEAR-SUN (24-TEETH)
10.	169-5592	[3]	GEAR-PLANETARY (23-TEETH)
11.	169-5593	[3]	GEAR-PLANETARY (23-TEETH)
12.	169-5601	[3]	SHAFT-PLANETARY
13.	169-5602	[3]	SHAFT-PLANETARY
14.	171-9387	[1]	GEAR-RING (64-TEETH)
15.	191-2569	[3]	BEARING AS (CAGED ROLLER)
16.	191-2570	[6]	BEARING AS (CAGED ROLLER)
17.	191-2571	[1]	CARRIER-PLANETARY
18.	191-2676	[1]	GEAR-RING (72-TEETH)
19.	191-2683	[1]	GEAR-SUN (20-TEETH)
20.	191-2684	[3]	GEAR-PLANETARY (21-TEETH)
21.	191-2685	[3]	BEARING AS
22.	191-2686	[1]	CARRIER AS
		[3]	SHAFT-PLANETARY
	191-2687	[3]	RACE-BEARING
23.	191-2689	[3]	WASHER (34X70X1-MM THK)
24.	191-2690	[3]	WASHER (42.3X70X1-MM THK)
25.	199-4503	[1]	COVER
26.	207-1571 J	[1]	SEAL GP-DUO-CONE
26A.	214-3570	[2]	RING-TORIC
26B.	Z	[2]	SEAL-RING
27.	227-6117 J	[1]	HOUSING-MOTOR
28.	227-6118 J	[1]	RETAINER
29.	227-6119	[1]	CARRIER-PLANETARY
30.	227-6123 J	[2]	DOWEL
31.	227-6124 J	[2]	PLATE-WASHER
32.	093-1731	[2]	RING-RETAINING
33.	095-0891	[6]	PIN-SPRING
34.	096-0433	[3]	RING-RETAINING
35.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
36.	171-9298	[1]	SEAL-O-RING
37.	179-8733 M	[16]	BOLT (M20X2.5X170-MM)
38.	7M-8485	[2]	SEAL-O-RING
39.	7Y-0595	[3]	SPACER (58X79.6X6-MM THK)
40.	8T-0293 JM	[4]	BOLT (M12X1.75X20-MM)
41.	8T-4123	[16]	WASHER (3.62X5.75X0.375-MM THK)
42.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
43.	1U-8846 B		SEALANT-GASKET

			AVAILABLE REPAIR KIT(S):
	227-6125 J	[1]	KIT-HOUSING (FINAL DRIVE)
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	Z		NOT SERVICED SEPARATELY

#SEBP44170454

267-6796: DRIVE GP-FINAL

DRIVE GP-FINAL

267-6796 DRIVE GP-FINAL -WITHOUT MOTOR
S/N KDG217-UP; AZP1-UP; SCR775-UP; CYW1-UP
PART OF 267-6877, 333-2982 DRIVE GP-FINAL
ALSO AN ATTACHMENT

i02895171 SEBP4417

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE
2.	267-6863 BJ	[1]	SHIM (0.75-MM THK)
	7Y-0752 BJ	[1]	SHIM (0.8-MM THK)
	267-6864 BJ	[1]	SHIM (0.85-MM THK)
	267-6865 BJ	[1]	SHIM (0.9-MM THK)
	267-6866 BJ	[1]	SHIM (0.95-MM THK)
	7Y-0753 BJ	[1]	SHIM (1-MM THK)
	267-6867 BJ	[1]	SHIM (1.2-MM THK)
	267-6868 BJ	[1]	SHIM (1.4-MM THK)
	7Y-0754 BJ	[1]	SHIM (1.6-MM THK)
	267-6869 BJ	[1]	SHIM (1.8-MM THK)
	267-6870 BJ	[1]	SHIM (2-MM THK)
	267-6871 BJ	[1]	SHIM (2.3-MM THK)
5.	094-0578 B	[1]	PLATE (8-MM THK)
	094-0579 B	[1]	PLATE (9-MM THK)
	094-0580 B	[1]	PLATE (10-MM THK)
8.	094-1528	[12]	WASHER (53X84X1-MM THK)
9.	114-1540 J	[4]	PIN-DOWEL
10.	168-8452 J	[2]	BALL BEARING
11.	169-5589	[1]	GEAR-SUN (24-TEETH)
12.	169-5590	[1]	GEAR-SUN (24-TEETH)
13.	169-5592	[3]	GEAR-PLANETARY (23-TEETH)
14.	169-5593	[3]	GEAR-PLANETARY (23-TEETH)
15.	169-5601	[3]	SHAFT-PLANETARY
16.	169-5602	[3]	SHAFT-PLANETARY
17.	171-9387	[1]	GEAR-RING (64-TEETH)
18.	191-2569	[3]	BEARING AS (CAGED ROLLER)
19.	191-2570	[6]	BEARING AS (CAGED ROLLER)
20.	191-2571	[1]	CARRIER-PLANETARY
21.	191-2676	[1]	GEAR-RING (72-TEETH)
22.	191-2683	[1]	GEAR-SUN (20-TEETH)
23.	191-2684	[3]	GEAR-PLANETARY (21-TEETH)
24.	191-2685	[3]	BEARING AS
25.	191-2686	[1]	CARRIER AS
	191-2687	[3]	RACE-BEARING
26.	191-2689	[3]	WASHER (34X70X1-MM THK)
27.	191-2690	[3]	WASHER (42.3X70X1-MM THK)
28.	199-4503	[1]	COVER
29.	207-1571 J	[1]	SEAL GP-DUO-CONE
	214-3570	[2]	RING-TORIC
30.	267-6797 J	[1]	HOUSING-MOTOR
31.	267-6798 J	[1]	HOUSING
32.	267-6799	[1]	CARRIER-PLANETARY
33.	267-6800 J	[1]	GEAR-COUPLING
43.	093-1731	[2]	RING-RETAINING
44.	095-0891	[6]	PIN-SPRING
45.	096-0433	[3]	RING-RETAINING
46.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
47.	171-9298	[1]	SEAL-O-RING
48.	179-8733 M	[16]	BOLT (M20X2.5X170-MM)
49.	7M-8485	[2]	SEAL-O-RING
50.	7Y-0595	[3]	SPACER (58X79.6X6-MM THK)
51.	7Y-5217 JM	[16]	BOLT-SOCKET HEAD (M20X2.5X70-MM)
52.	8T-3282 J	[16]	WASHER-HARD (22X35X3.5-MM THK)
53.	8T-4123	[16]	WASHER (3.62X5.75X0.375-MM THK)
54.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
55.	1U-8846 B		SEALANT-GASKET

			AVAILABLE REPAIR KIT(S):
	267-6818 J	[1]	KIT-FINAL DRIVE BEARING
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP44170455

267-6877: DRIVE GP-FINAL

DRIVE GP-FINAL

267-6877 DRIVE GP-FINAL -WITH MOTOR
S/N KDG217-UP; AZP1-UP; SCR775-UP; CYW1-UP
PART OF 171-9410 POWER TRAIN AR
ALSO FIELD INSTALLATION

i02895168 SEBP4417

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	204-2674 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	267-6796 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP44170456

333-2909: DRIVE GP-FINAL

DRIVE GP-FINAL

333-2909 DRIVE GP-FINAL -WITHOUT MOTOR
S/N CYW1-UP
PART OF 333-2921, 367-8291 DRIVE GP-FINAL
AN ATTACHMENT

i04267149 SEBP4417

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)
2.	267-6863 B	[1]	SHIM (0.75-MM THK)
	7Y-0752 B	[1]	SHIM (0.8-MM THK)
	267-6864 B	[1]	SHIM (0.85-MM THK)
	267-6865 B	[1]	SHIM (0.9-MM THK)
	267-6866 B	[1]	SHIM (0.95-MM THK)
	7Y-0753 B	[1]	SHIM (1-MM THK)
	267-6867 B	[1]	SHIM (1.2-MM THK)
	267-6868 B	[1]	SHIM (1.4-MM THK)
	7Y-0754 B	[1]	SHIM (1.6-MM THK)
	267-6869 B	[1]	SHIM (1.8-MM THK)
	267-6870 B	[1]	SHIM (2-MM THK)
	267-6871 B	[1]	SHIM (2.3-MM THK)
3.	191-2690	[3]	WASHER (42.3X70X1-MM THK)
5.	094-0578 B	[1]	PLATE (8-MM THK)
6.	094-0579 B	[1]	PLATE (9-MM THK)
7.	094-0580 B	[1]	PLATE (10-MM THK)
8.	094-1528	[12]	WASHER (53X84X1-MM THK)
9.	114-1540	[4]	PIN-DOWEL
10.	333-2914	[2]	BALL BEARING
11.	169-5589	[1]	GEAR-SUN (24-TEETH)
12.	169-5590	[1]	GEAR-SUN (24-TEETH)
13.	169-5592	[3]	GEAR-PLANETARY (23-TEETH)
14.	169-5593	[3]	GEAR-PLANETARY (23-TEETH)
15.	171-9387	[1]	GEAR-RING (64-TEETH)
16.	169-5601	[3]	SHAFT-PLANETARY
17.	169-5602	[3]	SHAFT-PLANETARY
18.	191-2689	[3]	WASHER (34X70X1-MM THK)
19.	333-2916	[3]	BEARING AS
20.	333-2917	[6]	BEARING AS
21.	191-2571	[1]	CARRIER-PLANETARY
22.	191-2683	[1]	GEAR-SUN (20-TEETH)
23.	191-2684	[3]	GEAR-PLANETARY (21-TEETH)
24.	191-2676	[1]	GEAR-RING (72-TEETH)
25.	296-6248	[3]	BEARING AS-ROLLER
26.	191-2686	[1]	CARRIER AS
27.	199-4503	[1]	COVER
28.	207-1571	[1]	SEAL GP-DUO-CONE
	214-3570	[2]	RING-TORIC
29.	267-6797	[1]	HOUSING-MOTOR
30.	267-6799	[1]	CARRIER-PLANETARY
31.	267-6800	[1]	GEAR-COUPLING
41.	267-6798	[1]	HOUSING
42.	093-1731	[2]	RING-RETAINING
43.	095-0891	[6]	PIN-SPRING
44.	096-0433	[3]	RING-RETAINING
45.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
46.	171-9298	[1]	SEAL-O-RING
47.	179-8733 M	[16]	BOLT (M20X2.5X170-MM)
48.	7M-8485	[2]	SEAL-O-RING
49.	7Y-0595	[3]	SPACER (58X79.6X6-MM THK)
50.	7Y-5217 M	[16]	BOLT-SOCKET HEAD (M20X2.5X70-MM)
51.	8T-3282	[16]	WASHER-HARD (22X35X3.5-MM THK)
52.	8T-4123	[16]	WASHER (3.62X5.75X0.375-MM THK)
53.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
54.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP44170457

333-2921: DRIVE GP-FINAL

DRIVE GP-FINAL

333-2921 DRIVE GP-FINAL -WITH MOTOR
S/N CYW1-UP
PART OF 353-0493 DRIVE GP-FINAL
AN ATTACHMENT

i04542556 SEBP4417

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	333-2909 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
2.	334-9989 Y	[1]	MOTOR & MTG GP-TRAVEL
	Y		SEPARATE ILLUSTRATION

#SEBP44170458

333-2982: DRIVE GP-FINAL

DRIVE GP-FINAL

333-2982 DRIVE GP-FINAL -WITH MOTOR, BIODEGRADABLE OIL
S/N CYW1-UP
PART OF 353-0672 DRIVE GP-FINAL, 229-1791 HYDRAULIC AR-BIODEGRADABLE OIL
AN ATTACHMENT

i03706340 SEBP4417

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	215-9956 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	267-6796 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP44170459

353-0493: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0493 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N CYW1-UP
PART OF 229-1791 HYDRAULIC AR-BIODEGRADABLE OIL
Type 1
AN ATTACHMENT

i04542549 SEBP4417

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	333-2921 Y	[1]	DRIVE GP-FINAL (WITH MOTOR)
2.	179-2994 Y	[1]	SPROCKET GP (NON-SEGMENTED)
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery Disconnect Switch
325D and 329D Excavators

Battery or Battery Cable - Inspect/Replace
325D and 329D Excavators

Battery - Recycle
325D and 329D Excavators

Window (Power) - If Equipped
325D and 329D Excavators

Power Receptacle - If Equipped
325D and 329D Excavators

Fuses - Replace
325D and 329D Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation of 279-5323 Coupler Lines Gp (KIT, PIN GRABBER){1408, 5057, 5479, 6129, 7000, 7332}
Installation of 279-5323 Coupler Lines Gp (KIT, PIN GRABBER){1408, 5057, 5479, 6129, 7000, 7332}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Installation Procedure of 328-0393 Auxiliary Control Wiring Gp on Certain Excavators{1408}
Installation Procedure of 328-0393 Auxiliary Control Wiring Gp on Certain Excavators{1408}

Installation of the 251-0437 Auxiliary Control Wiring Gp {1408}
Installation of the 251-0437 Auxiliary Control Wiring Gp {1408}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation of the 238-1565 Quick Coupler Wiring Gp on Certain Hydraulic Excavators{1408, 6129}
Installation of the 238-1565 Quick Coupler Wiring Gp on Certain Hydraulic Excavators{1408, 6129}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Technical Information Bulletin

Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Relays
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Senders
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Sensors
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C7 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Connector - Inspect
AccuGrade^® GPS (CD700)

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS (CD700)

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS (CD700)

Overload Warning - Set - If Equipped
325D and 329D Excavators Hydraulic System

Connector Contact Description
AccuGrade^® GPS (CD700)

Electrical Connector - Inspect
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Connector Contact Description
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

Electrical Power Supply
AccuGrade^® GPS (CD700)

CAN Data Link - Test
AccuGrade^® GPS (CD700)

CAN Data Link - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31

Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/08/18