223-3042 FENDER & COVER GP S/N KDG1-UP; AZP1-UP; SCR1-UP; CYW1-UP PART OF 229-1733, 229-1734, 229-1735, 229-1736 CHASSIS AR 325D L

FRAME AND BODY

FENDER GP

0. 223-3042 FENDER & C

FRAME GP

1. 228-5504 FRAME GP-U
2. 235-7613 FRAME GP-U
3. 235-7613 FRAME GP-U

GEAR & BEARING GP

4. 199-4478 GEAR & BEA
5. 227-6087 GEAR & BEA
6. 227-6088 GEAR & BEA
7. 227-6107 GEAR & BEA
8. 353-0558 GEAR & BEA

GUARD GP

9. 223-3047 GUARD GP-B
0. INFORMATION

EXCAVATOR 325D L EXCAVATOR AZP
325D & 325D L Excavators AZP00001-UP (MACHINE) POWERED BY C7 Engine SEBP4417 325D L AZP (2005)

FRAME AND BODY

FENDER GP

223-3042 FENDER & COVER GP

#SEBP44170540

223-3042: FENDER & COVER GP

FENDER & COVER GP

223-3042 FENDER & COVER GP
S/N KDG1-UP; AZP1-UP; SCR1-UP; CYW1-UP
PART OF 229-1733, 229-1734, 229-1735, 229-1736 CHASSIS AR

i02347079 SEBP4417

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	135-8573	[2]	BOLT AS
2.	236-3702	[2]	SPACER (15X35X11-MM THK)
3.	236-3703	[2]	WASHER (25X35X4-MM THK)
4.	236-9570	[1]	COVER AS
5.	259-3543	[1]	STEP AS
6.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
7.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
	M		METRIC PART

#SEBP44170541

228-5504: FRAME GP-UPPER

FRAME GP-UPPER

228-5504 FRAME GP-UPPER
S/N KDG1-280; AZP1-140; SCR1-1081; CYW1-192
PART OF 229-1733, 229-1734, 229-1735, 229-1736 CHASSIS AR

i02348147 SEBP4417

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	093-0090 B	[4]	SHIM (1-MM THK)
2.	093-0364	[2]	SPACER (103X140X12-MM THK)
3.	133-2427 B	[2]	SHIM (0.5-MM THK)
4.	186-5663	[2]	PIN AS
5.	201-2771	[1]	WASHER (26X90X8-MM THK)
6.	212-2840 B	[2]	SHIM (2-MM THK)
7.	245-7900 J	[1]	CAP
8.	245-7901 J	[1]	CAP
9.	251-2772	[1]	FRAME AS-UPPER
	7Y-0633	[1]	BOSS
	163-3729	[1]	STEP AS
10.	260-2385	[1]	PIN AS
11.	308-8781 B	[1]	SHIM (0.5-MM THK)
12.	308-8782 B	[2]	SHIM (1-MM THK)
13.	308-8783 B	[1]	SHIM (2-MM THK)
14.	096-6467	[2]	WASHER (22X60X8-MM THK)
15.	166-1488 B	[4]	SHIM (2-MM THK)
16.	7X-2572 M	[1]	BOLT (M24X3X35-MM)
17.	8T-4123	[2]	WASHER (3.62X5.75X0.375-MM THK)
18.	8T-4167	[1]	WASHER-HARD (26X44X4-MM THK)
19.	8T-4780 M	[2]	BOLT (M20X2.5X30-MM)

			THE FOLLOWING REPAIR PARTS ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
	178-0852 F	[1]	PLATE-SKIRT (1100-MM)
	184-5724 F	[1]	PLATE-SKIRT (2000-MM)
	B		USE AS REQUIRED
	F		NOT SHOWN
	J		USE ON MACHINE WITHOUT LOWER WIPER
	M		METRIC PART

#SEBP44170542

235-7613: FRAME GP-UPPER

FRAME GP-UPPER

235-7613 FRAME GP-UPPER
S/N KDG1-UP; AZP1-UP; SCR1-UP; CYW1-UP
Type 1
AN ATTACHMENT

i02350153 SEBP4417

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	180-7521	[1]	BUMPER AS
2.	180-7525	[2]	BUMPER AS
3.	180-7529	[1]	BUMPER AS
4.	180-7537	[1]	BUMPER AS
5.	186-5611	[1]	BUMPER AS
6.	186-5614	[1]	BUMPER AS
7.	254-2905	[1]	FRAME AS-UPPER
	163-3729	[1]	STEP AS
8.	8T-4223	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
9.	8T-4244 M	[16]	NUT (M12X1.75-THD)
	M		METRIC PART

#SEBP44170543

235-7613: FRAME GP-UPPER

FRAME GP-UPPER

235-7613 FRAME GP-UPPER
S/N KDG1-UP; AZP1-UP; SCR1-UP; CYW1-UP
Type 2
AN ATTACHMENT

i04678171 SEBP4417

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	180-7521	[1]	BUMPER AS
2.	180-7525	[2]	BUMPER AS
3.	180-7529	[1]	BUMPER AS
4.	180-7537	[1]	BUMPER AS
5.	186-5611	[1]	BUMPER AS
6.	186-5614	[1]	BUMPER AS
7.	352-9585 C	[1]	FRAME AS-UPPER
7A.	7Y-0633	[1]	BOSS
7B.	163-3729	[1]	STEP AS
8.	8T-4223	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
9.	8T-4244 M	[16]	NUT (M12X1.75-THD)

			THE FOLLOWING REPAIR PART IS AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
	178-0852 F	[1]	PLATE-SKIRT (1100-MM)
	184-5724 F	[1]	PLATE-SKIRT (2000-MM)
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN
	M		METRIC PART

#SEBP44170544

199-4478: GEAR & BEARING GP-SWING

GEAR & BEARING GP-SWING

199-4478 GEAR & BEARING GP-SWING
S/N KDG1-UP; AZP1-UP; SCR1-UP; CYW1-UP
PART OF 227-6087 GEAR & BEARING GP-SWING

i02487233 SEBP4417

1994478 GEAR & BEARING GP-SWING Parts scheme

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
2.	110-7183 E		SEAL (424-CM)
2A.	110-7183 E		SEAL (425-CM)
	E		ORDER BY THE CENTIMETER

#SEBP44170545

227-6087: GEAR & BEARING GP-SWING

GEAR & BEARING GP-SWING

227-6087 GEAR & BEARING GP-SWING
S/N KDG1-UP; AZP1-UP; SCR1-UP; CYW1-UP
PART OF 227-6107 GEAR & BEARING GP-SWING
FIELD REPLACEMENT ORDER @@@@@353-0558@@@@@

i02348049 SEBP4417

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
199-4478 Y	[1]	GEAR & BEARING GP-SWING (122-BEARING)
		-OR-
227-6088 Y	[1]	GEAR & BEARING GP-SWING (122-BEARING)
Y		SEPARATE ILLUSTRATION

#SEBP44170546

227-6088: GEAR & BEARING GP-SWING

GEAR & BEARING GP-SWING

227-6088 GEAR & BEARING GP-SWING
S/N KDG1-UP; AZP1-UP; SCR1-UP; CYW1-UP
PART OF 227-6087 GEAR & BEARING GP-SWING

i02348540 SEBP4417

2276088 GEAR & BEARING GP-SWING Parts scheme

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	227-6073	[1]	SEAL-DUST
2.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
3.	148-4685 E		SEAL (414-CM)
	E		ORDER BY THE CENTIMETER

#SEBP44170547

227-6107: GEAR & BEARING GP-SWING

GEAR & BEARING GP-SWING

227-6107 GEAR & BEARING GP-SWING
S/N KDG1-UP; AZP1-UP; SCR1-UP; CYW1-UP
PART OF 229-1746, 229-1747 FRAME AR-UNDERCARRIAGE

i02347821 SEBP4417

2276107 GEAR & BEARING GP-SWING Parts scheme

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1U-8846 B		SEALANT-GASKET
2.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
3.	5K-9243	[2]	ELBOW-FLARED
4.	6I-6441	[2]	CORK
			(USED ONLY IN LOCATIONS MARKED Y)
5.	7Y-1647	[1]	GASKET
6.	7Y-1650	[1]	CLAMP-HOSE
7.	199-4522	[1]	TUBE AS
8.	227-6087 Y	[1]	GEAR & BEARING GP-SWING
9.	227-6105	[1]	BOOT
10.	227-6106	[1]	RETAINER
11.	093-0020	[35]	SPACER (25X44X6-MM THK)
			(NOT USED IN LOCATIONS MARKED X)
12.	096-4902	[1]	DOWEL
13.	148-4703	[1]	COVER
14.	148-4704	[1]	GASKET
15.	4N-9170	[2]	CLIP (LOOP)
16.	7Y-1507	[42]	SPACER (24.5X44X43-MM THK)
17.	7Y-1648	[1]	STRIP
18.	8T-0667 M	[42]	BOLT (M24X3X100-MM)
19.	8T-0669 M	[35]	BOLT (M24X3X130-MM)
20.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4136 M	[12]	BOLT (M10X1.5X25-MM)
22.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
23.	8T-4199 M	[2]	BOLT (M8X1.25X12-MM)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP44170548

353-0558: GEAR & BEARING GP-SWING

GEAR & BEARING GP-SWING

353-0558 GEAR & BEARING GP-SWING
S/N KDG1-UP; AZP1-UP; SCR1-UP; CYW1-UP
FIELD REPLACEMENT FOR @@@@@227-6087@@@@@

i04238971 SEBP4417

3530558 GEAR & BEARING GP-SWING Parts scheme

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	227-6073	[1]	SEAL-DUST
2.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
3.	148-4685 E		SEAL (414-CM)
	E		ORDER BY THE CENTIMETER

#SEBP44170549

223-3047: GUARD GP-BOTTOM

GUARD GP-BOTTOM

223-3047 GUARD GP-BOTTOM
S/N KDG1-UP; AZP1-UP; SCR1-UP
PART OF 229-1733, 229-1734, 229-1735 CHASSIS AR

i02348133 SEBP4417

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	135-8576	[38]	BOLT AS-LOCKING
2.	184-8784	[1]	SHEET
3.	223-3098	[1]	SHEET
4.	223-3099	[1]	SHEET
5.	223-3103	[1]	SHEET
6.	223-3104	[1]	SHEET
7.	351-3008	[2]	PLATE AS
8.	262-2376	[1]	SHEET
9.	262-2377	[1]	SHEET AS