AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

327-3678 BUCKET GP-HEAVY DUTY ROCK -DB-FAMILY S/N KDG1-UP; SCR1-UP 1219-MM (48-IN) WIDE X 1.41-CU M (1.84-CU YD) CAPACITY. K-110 ADAPTERS, (5X) AN ATTACHMENT 325D L


WORK TOOLS
BUCKET GP
COUPLER GP-QUICK
GROUND ENGAGING TOOLS (G.E.T.)
BUCKET GP
GROUND ENGAGING TOOLS (G.E.T.)
BUCKET GP

EXCAVATOR 325D L EXCAVATOR AZP
 325D & 325D L Excavators AZP00001-UP (MACHINE) POWERED BY C7 Engine SEBP4417 325D L AZP   (2005)

WORK TOOLS

BUCKET GP
327-3677 BUCKET GP-HEAVY DUTY
327-3668 BUCKET GP-HEAVY DUTY ROCK
327-3678 BUCKET GP-HEAVY DUTY ROCK
290-5878 PIN GP-BUCKET
290-5881 PIN GP-BUCKET
SHROUD
459-1903 SHROUD
 

#SEBP44171340
 

327-3678: BUCKET GP-HEAVY DUTY ROCK

327-3678 BUCKET GP-HEAVY DUTY ROCK -DB-FAMILY
S/N KDG1-UP; SCR1-UP
1219-MM (48-IN) WIDE X 1.41-CU M (1.84-CU YD) CAPACITY. K-110 ADAPTERS, (5X)
AN ATTACHMENT
i03097413 SEBP4417
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  281-2168 Y [1] BUCKET AS-HEAVY DUTY ROCK  
  290-5881 Y [1] PIN GP-BUCKET  
  195-7216 Y [1] PROTECTOR GP-SIDE BAR  
  309-1124 Y [5] TIP GP-PENETRATION PLUS (K-110)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP44171341
 

486-5368: COUPLER GP-QUICK

486-5368 COUPLER GP-QUICK -CB-LINKAGE
S/N KDG1-UP; AZP1-UP; SCR1-UP; CYW1-UP
AN ATTACHMENT
i06521377 SEBP4417
4865368 COUPLER GP-QUICK Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 460-8347 [1] PLATE-COVER  
2. 5B-0935 [7] FITTING-GREASE  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 355-5804 [2] PLUG  
6. 388-0090 [2] SPRING-GUIDE  
7. 388-0099 [1] PIN  
8. 388-0105 I [3] HOSE AS  
9. 388-0107 I [1] HOSE AS  
10. 389-7207 [1] WEDGE  
11. 389-7208 [2] SPACER  
12. 389-7209 [1] PIN  
13. 389-7210 [1] PIN  
14. 389-7212 [1] PIN  
15. 389-7213 Y [1] CYLINDER GP-COUPLER  
16. 391-4179 [1] LATCH  
17. 393-7496 I [1] HOSE AS  
18. 424-6681 [2] SPRING  
19. 441-2044 I [1] HOSE AS  
20. 441-2045 I [1] HOSE AS  
21. 447-5583 [1] PIN  
23. 467-8014 [1] ROCKER ARM (RH)  
24. 467-8015 [1] ROCKER ARM (LH)  
26. 096-0015 [4] RING-RETAINING  
27. 2D-6398 [2] RING-RETAINING  
28. 2P-1279 [2] LOCKNUT (9/16-18-THD)  
29. 3J-1907 [1] SEAL-O-RING  
30. 3J-7354 [1] SEAL-O-RING  
31. 4D-1322 [2] RING-RETAINING  
32. 4D-7794 [2] CLIP  
33. 4J-5477 [3] SEAL-O-RING  
34. 4M-8973 [2] ELBOW  
35. 5P-9436 [2] PLUG  
36. 6J-7836 [2] RING-SNAP  
37. 6V-8397 [3] SEAL-O-RING  
38. 6V-8636 [1] CONNECTOR  
39. 6V-8647 [1] CONNECTOR  
40. 6V-8979 [1] ELBOW  
41. 6V-8980 [1] ELBOW  
42. 6V-9168 [2] NUT (11/16-16-THD)  
43. 6V-9828 [1] CAP (ORFS)  
44. 6V-9829 [1] CAP  
45. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
46. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
47. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44171342
 

497-6360: COUPLER GP-QUICK

497-6360 COUPLER GP-QUICK -DB-LINKAGE
S/N KDG1-UP; AZP1-UP; SCR1-UP; CYW1-UP
AN ATTACHMENT
i06577591 SEBP4417
4976360 COUPLER GP-QUICK Parts scheme 4976360 COUPLER GP-QUICK Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
2. 5B-0935 [6] FITTING-GREASE  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 388-9741 [1] LATCH  
5. 388-9746 [1] PIN  
6. 388-9752 Y [1] CYLINDER GP-COUPLER  
7. 388-9755 [1] PIN  
8. 394-9473 I [3] HOSE AS  
9. 396-3808 I [1] HOSE AS  
10. 396-7843 [1] ROCKER ARM (LH)  
11. 396-7845 [1] ROCKER ARM (RH)  
12. 396-7847 [1] SPRING (LH)  
13. 396-7850 [1] SPRING (RH)  
14. 424-6689 [2] VALVE  
15. 426-3566 [2] SPRING-GUIDE  
16. 440-3756 [1] PIN  
17. 441-9269 I [1] HOSE AS  
18. 441-9271 I [1] HOSE AS  
19. 448-5030 [1] PIN  
20. 450-2267 [1] WEDGE  
21. 458-3275 [1] PLATE  
22. 461-3776 [1] PLATE-COVER  
23. [1] COUPLER AS  
  465-6317 [1] LIFT EYE  
  475-0019 [8] PIN  
  476-7093 [4] PIN  
24. 002-3455 [2] RING-RETAINING  
25. 1L-3768 [2] RING-RETAINING  
26. 2D-6398 [2] RING-RETAINING  
27. 2L-6726 [2] RING-RETAINING  
28. 2P-1279 [2] LOCKNUT (9/16-18-THD)  
29. 2W-5975 [1] SCREW-BOLT (1/4-28X0.5-IN)  
30. 3H-0120 [1] ELBOW  
31. 3J-1907 [1] SEAL-O-RING  
32. 3J-7354 [1] SEAL-O-RING  
33. 4D-7794 [1] CLIP  
34. 4J-5477 [3] SEAL-O-RING  
35. 5P-8246 [4] WASHER-HARD (15.5X29X3-MM THK)  
36. 5P-9436 [2] PLUG  
37. 6V-8397 [3] SEAL-O-RING  
38. 6V-8636 [1] CONNECTOR  
39. 6V-8647 [1] CONNECTOR  
40. 6V-8979 [1] ELBOW  
41. 6V-8980 [1] ELBOW  
42. 6V-9168 [2] NUT (11/16-16-THD)  
43. 6V-9828 [1] CAP (ORFS)  
44. 6V-9829 [1] CAP  
45. 214-6277 M [4] BOLT (M14X2X60-MM)  
46. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
47. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
48. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44171343
 

220-9128: EDGE GP-CUTTING

220-9128 EDGE GP-CUTTING
S/N KDG1-UP; SCR1-UP
PART OF 327-3669 BUCKET GP-DITCH CLEANING
FOR USE WITH 1829-MM (72-IN) DITCH CLEANING BUCKET WITH 40-MM (1.6-IN) THICK BASE EDGE
AN ATTACHMENT
i01860170 SEBP4417
2209128 EDGE GP-CUTTING Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-9208 [6] BOLT-PLOW (1-8X3.5-IN)  
2. 2J-3507 [6] NUT-FULL (1-8-THD)  
3. 174-8029 [2] EDGE-CUTTING  
 

#SEBP44171344
 

220-9129: EDGE GP-CUTTING

220-9129 EDGE GP-CUTTING
S/N KDG1-UP; SCR1-UP
PART OF 327-3679 BUCKET GP-DITCH CLEANING
AN ATTACHMENT
i03097424 SEBP4417
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8J-2928 [6] BOLT-PLOW (1-8X3.75-IN)  
  174-8029 [2] EDGE-CUTTING  
  2J-3507 [6] NUT-FULL (1-8-THD)  
 

#SEBP44171345
 

290-5878: PIN GP-BUCKET

290-5878 PIN GP-BUCKET
S/N KDG1-UP; SCR1-UP
PART OF 327-3669 BUCKET GP-DITCH CLEANING, 327-3661, 327-3662, 327-3663, 327-3664, 327-3665, 327-3666, 327-3667 BUCKET GP-HEAVY DUTY, 327-3668 BUCKET GP-HEAVY DUTY ROCK
AN ATTACHMENT
i03093560 SEBP4417
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-5460 M [2] BOLT (M20X2.5X40-MM)  
  290-5879 [2] PIN AS  
  8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
  093-0349 [2] WASHER (22X60X6-MM THK)  
  M   METRIC PART
 

#SEBP44171346
 

290-5881: PIN GP-BUCKET

290-5881 PIN GP-BUCKET
S/N KDG1-UP; SCR1-UP
PART OF 327-3679 BUCKET GP-DITCH CLEANING, 327-3670, 327-3671, 327-3672, 327-3673, 327-3674, 327-3675, 327-3676, 327-3677 BUCKET GP-HEAVY DUTY, 327-3678 BUCKET GP-HEAVY DUTY ROCK
AN ATTACHMENT
i03095507 SEBP4417
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-5379 M [1] BOLT (M24X3X50-MM)  
  8T-5460 M [1] BOLT (M20X2.5X40-MM)  
  290-5882 [1] PIN AS  
  290-5884 [1] PIN AS  
  8T-4123 [1] WASHER (3.62X5.75X0.375-MM THK)  
  093-0349 [1] WASHER (22X60X6-MM THK)  
  201-2771 [1] WASHER (26X90X8-MM THK)  
  8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
  M   METRIC PART
 

#SEBP44171347
 

195-7216: PROTECTOR GP-SIDE BAR

195-7216 PROTECTOR GP-SIDE BAR
S/N KDG1-UP; SCR1-UP
PART OF 327-3668, 327-3678 BUCKET GP-HEAVY DUTY ROCK
AN ATTACHMENT
i02558462 SEBP4417
1957216 PROTECTOR GP-SIDE BAR Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 329-5958 [4] PROTECTOR-SIDE BAR  
2. 275-5982 [8] PIN  
3. 132-0999 [8] RETAINER AS  
 

#SEBP44171348
 

459-1903: SHROUD

459-1903 SHROUD
S/N AZP1-UP
37-MM THICK
FIELD INSTALLATION
i06784747 SEBP4417
4591903 SHROUD Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP44171349
 

459-1904: SHROUD

459-1904 SHROUD
S/N AZP1-UP
50-MM THICK
FIELD INSTALLATION
i06784729 SEBP4417
4591904 SHROUD Parts scheme
  For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

Information:

Operation and Maintenance Manual
Boom, Stick and Bucket Operation
325D and 329D Excavators
Quick Coupler - Lubricate - If Equipped
325D and 329D Excavators
Quick Coupler Operation - Double Action (If Equipped)
325D and 329D Excavators
Quick Coupler Operation - Hydraulic Pin Grabber Quick Coupler (If Equipped)
325D and 329D Excavators
Bucket - Remove and Install
325D and 329D Excavators
Boom/Stick/Bucket Combinations
325D and 329D Excavators
Special Instruction
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Modification of Hydraulic Excavator Buckets from C Family Linkage and S Family Linkage to CB Family Linkage{6503, 6513, 6700}
Modification of Hydraulic Excavator Buckets from C Family Linkage and S Family Linkage to CB Family Linkage{6503, 6513, 6700}
Installation of the 282-4229 Sleeve Bushing Gp (KIT){6513}
Installation of the 282-4229 Sleeve Bushing Gp (KIT){6513}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Technical Information Bulletin
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Specifications
Bucket Adjuster
325D and 329D Excavators Machine System Specifications
Bucket Adjuster
325D and 329D Excavators Machine System Specifications
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Testing and Adjusting
Specifications - 325D/ 329D
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front
Disassembly and Assembly
Bucket - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems
Bucket - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems
Service Magazine
Installation Procedure For The K Series Drive Through Tooth System {6805, 6822}
2007/11/26
Improved K110 Adapters are now available for Wheel Loaders and Excavators {6800}
2008/08/25
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}

Caterpillar Parts SIS Catalog 325D L :

327-3668 BUCKET GP-HEAVY DUTY ROCK
327-3677 BUCKET GP-HEAVY DUTY
327-3676 BUCKET GP-HEAVY DUTY
327-3675 BUCKET GP-HEAVY DUTY
327-3674 BUCKET GP-HEAVY DUTY
327-3673 BUCKET GP-HEAVY DUTY
327-3672 BUCKET GP-HEAVY DUTY
327-3671 BUCKET GP-HEAVY DUTY
COUPLER GP-QUICK
486-5368 COUPLER GP-QUICK
COUPLER GP-QUICK
497-6360 COUPLER GP-QUICK
EDGE GP-CUTTING
220-9128 EDGE GP-CUTTING
220-9129 EDGE GP-CUTTING
290-5878 PIN GP-BUCKET
290-5881 PIN GP-BUCKET
PROTECTOR GP-SIDE BAR
195-7216 PROTECTOR GP-SIDE BAR
SHROUD
459-1903 SHROUD

Truck sale:

 
62,927 
Caterpillar 325DL, Construction
- Crawler Excavators
TOROMONT CAT (QUÉBEC)
Canada
Caterpillar 325DL, Construction
 
Caterpillar 325DL, Construction
- Crawler Excavators
MANTRAC NIGERIA LIMITED
Nigeria
Caterpillar 325DL, Construction
55,681 
Caterpillar 325DL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France
Caterpillar 325DL, Construction
129,000 
Caterpillar 325DL, Construction
- Crawler Excavators
MICHIGAN CAT
Caterpillar 325DL, Construction
91,600 
Caterpillar 325DL, Construction
- Crawler Excavators
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.