AVSPARE.COM
parts catalog

300-9550 CYLINDER HEAD GP S/N TX71-UP; KHX1-UP PART OF 219-5847 CYLINDER HEAD GP ALSO AN ATTACHMENT 324D


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP
DRIVE GP-FAN
CYLINDER HEAD GP
FASTENER GP-ENGINE
HOUSING GP-FRONT
LIFTER GP
FLYWHEEL GP


BASIC ENGINE

CYLINDER HEAD GP
 

#SEBP44180270
 

300-9550: CYLINDER HEAD GP

300-9550 CYLINDER HEAD GP
S/N TX71-UP; KHX1-UP
PART OF 219-5847 CYLINDER HEAD GP
ALSO AN ATTACHMENT
i02756617 SEBP4418
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2715 [24] LOCK-RETAINER  
2. 2A-4429 [12] LOCK-RETAINER  
3. 137-6715 [6] SEAT-VALVE SPRING  
4. 137-6718 [6] SPRING-VALVE (EXHAUST)  
5. 140-6188 [12] SPRING-VALVE (INLET)  
6. 147-8214 [12] SEAL-VALVE STEM (INLET)  
7. 147-8220 [6] GUIDE-VALVE (STANDARD)  
  187-8278 AB GUIDE-VALVE (0.13-MM OS)  
  187-8279 AB GUIDE-VALVE (0.51-MM OS)  
8. 163-2478 [6] SEAL-VALVE STEM (EXHAUST)  
9. 252-7801 [12] VALVE-INLET  
10. Y [1] CYLINDER HEAD AS  
11. 134-4483 [6] RETAINER-SPRING  
12. 140-9670 [12] GUIDE-VALVE (STANDARD)  
  187-8280 AB GUIDE-VALVE (0.13-MM OS)  
  187-8281 AB GUIDE-VALVE (0.51-MM OS)  
13. 147-8211 [6] VALVE-EXHAUST  
14. 7E-7779 [12] RETAINER-SPRING  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP44180271
 

487-2807: CYLINDER HEAD GP

487-2807 CYLINDER HEAD GP
S/N TX71-UP; KHX1-UP
PART OF 219-5847 CYLINDER HEAD GP
ALSO AN ATTACHMENT
i06507459 SEBP4418
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2715 [24] LOCK-RETAINER  
2. 2A-4429 [12] LOCK-RETAINER  
3. 7E-7779 [12] RETAINER-SPRING  
4. 134-4483 [6] RETAINER-SPRING  
5. 137-6715 [6] SEAT-VALVE SPRING  
6. 137-6718 [6] SPRING-VALVE  
7. 140-6188 [12] SPRING-VALVE  
8. 147-8214 [12] SEAL-VALVE STEM  
9. 147-8220 [6] GUIDE-VALVE  
10. 157-7130 [6] VALVE-EXHAUST  
11. 163-2478 [6] SEAL-VALVE STEM  
12. 252-7801 [12] VALVE-INLET  
13. 487-2810 Y [1] CYLINDER HEAD AS  
14. 140-9670 [12] GUIDE-VALVE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP44180272
 

263-1850: DAMPER & PULLEY GP

263-1850 DAMPER & PULLEY GP
S/N KHX1-2381
PART OF 235-8134, 270-2767, 270-2768 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02353366 SEBP4418
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7381 [1] PLATE-CLAMP  
2. 116-6332 [1] SPACER-SPECIAL  
3. 167-8121 [1] DAMPER AS  
4. 228-3621 [1] SPACER (101.5X167X8-MM THK)  
5. 263-1826 [1] PULLEY-CRANKSHAFT  
6. 8T-3666 M [4] BOLT (M14X2X60-MM)  
7. 8T-5035 M [8] BOLT (M10X1.5X65-MM)  
  M   METRIC PART
 

#SEBP44180273
 

263-1850: DAMPER & PULLEY GP

263-1850 DAMPER & PULLEY GP
S/N TX71-UP; KHX1-UP
PART OF 290-0756, 387-8489, 387-8491 ENGINE AR, 235-8134, 235-8135, 270-2767, 270-2768, 290-0755, 290-0757, 290-0758, 387-8488, 423-3915, 423-3916, 435-1292, 435-1293 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02585779 SEBP4418
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7381 [1] PLATE-CLAMP  
2. 116-6332 [1] SPACER-SPECIAL  
3. 167-8121 [1] DAMPER AS  
4. 228-3621 [1] SPACER (101.5X167X8-MM THK)  
5. 153-1036 C [1] PULLEY-CRANKSHAFT (8-GROOVE)  
6. 8T-3666 M [4] BOLT (M14X2X60-MM)  
7. 8T-5035 M [8] BOLT (M10X1.5X65-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP44180274
 

177-6973: DRIVE GP-FAN

177-6973 DRIVE GP-FAN
S/N TX71-UP; KHX1-UP
PART OF 253-0437 BRACKET GP-ENGINE
ALSO AN ATTACHMENT
i01521337 SEBP4418
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-1203 [2] CUP-BEARING  
2. 4W-1204 [2] CONE-BEARING  
3. 4W-2042 [1] SPACER (35.3X45.5X38.331-MM THK)  
4. 6V-9748 [1] SEAL-LIP TYPE  
5. 7C-8369 [1] HUB  
6. 7C-8370 [1] CAP-DUST  
7. 7C-8634 [1] PLATE  
8. 183-2854 [1] BRACKET AS  
9. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
10. 6V-8004 M [1] BOLT (M12X1.75X120-MM)  
  M   METRIC PART
 

#SEBP44180275
 

258-8723: FASTENER GP-CYLINDER HEAD

258-8723 FASTENER GP-CYLINDER HEAD
S/N TX71-UP; KHX1-UP
PART OF 290-0756, 387-8489, 387-8491 ENGINE AR, 235-8134, 235-8135, 270-2767, 270-2768, 290-0755, 290-0757, 290-0758, 387-8488, 423-3915, 423-3916, 435-1292, 435-1293 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02353343 SEBP4418
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 229-8844 [3] CLIP  
2. 244-4500 [11] SPRING  
3. 8T-0100 M [11] BOLT (M8X1.25X60-MM)  
4. 9N-0869 [11] WASHER-HARD (8.8X25.5X2-MM THK)  
  M   METRIC PART
 

#SEBP44180276
 

252-9551: FASTENER GP-FRONT COVER

252-9551 FASTENER GP-FRONT COVER
S/N TX71-UP; KHX1-UP
PART OF 290-0756, 387-8489, 387-8491 ENGINE AR, 235-8134, 235-8135, 270-2767, 270-2768, 290-0755, 290-0757, 290-0758, 387-8488, 423-3915, 423-3916, 435-1292, 435-1293 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02213913 SEBP4418
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2098 M [1] STUD-TAPERLOCK (BOLT)  
2. 6V-2317 M [12] BOLT (M8X1.25X30-MM)  
3. 8T-0100 M [2] BOLT (M8X1.25X60-MM)  
4. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP44180277
 

116-4556: FASTENER GP-FRONT HOUSING

116-4556 FASTENER GP-FRONT HOUSING
S/N TX71-UP; KHX1-UP
PART OF 290-0756, 387-8489, 387-8491 ENGINE AR, 235-8134, 235-8135, 270-2767, 270-2768, 290-0755, 290-0757, 290-0758, 387-8488, 423-3915, 423-3916, 435-1292, 435-1293 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i01516753 SEBP4418
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8336 M [6] BOLT (M12X1.75X70-MM)  
  5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP44180278
 

113-6170: FASTENER GP-LIFTING

113-6170 FASTENER GP-LIFTING
S/N TX71-UP; KHX1-UP
PART OF 290-0756, 387-8489, 387-8491 ENGINE AR, 235-8134, 235-8135, 270-2767, 270-2768, 290-0755, 290-0757, 290-0758, 387-8488, 423-3915, 423-3916, 435-1292, 435-1293 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i01515859 SEBP4418
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
2. 6V-4248 M [3] BOLT (M10X1.5X25-MM)  
  M   METRIC PART
 

#SEBP44180279
 

186-5892: FLYWHEEL GP

186-5892 FLYWHEEL GP
S/N TX71-UP; KHX1-UP
PART OF 290-0756, 387-8489, 387-8491 ENGINE AR, 235-8134, 235-8135, 270-2767, 270-2768, 290-0755, 290-0757, 290-0758, 387-8488, 423-3915, 423-3916, 435-1293 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02293843 SEBP4418
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 202-2382 [1] FLYWHEEL AS  
1A. 1W-1064 [1] GEAR-FLYWHEEL RING (126-TEETH)  
2. 6V-8197 M [8] BOLT (M12X1.75X40-MM)  
3. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 3E-3213 [1] PIN-SPRING  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Engine Valve Lash - Check
324D and 326D Excavators
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Specifications
Cylinder Head
C7 Engines for Caterpillar Built Machines
Cylinder Head Valves
C7 Engines for Caterpillar Built Machines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS
CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C7 Engines for Caterpillar Built Machines
Disassembly and Assembly
Inlet and Exhaust Valves - Remove and Install
C7
Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Guides - Remove and Install
C7
Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Seat Inserts - Remove and Install
C7
Engines for Caterpillar Built Machines

Unit Injector Sleeve - Remove
C7
Engines for Caterpillar Built Machines

Unit Injector Sleeve - Install
C7
Engines for Caterpillar Built Machines

Camshaft Bearings - Remove and Install
C7
Engines for Caterpillar Built Machines

Cylinder Head - Remove
C7
Engines for Caterpillar Built Machines

Cylinder Head - Install
C7
Engines for Caterpillar Built Machines

Cylinder Head - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement
Cylinder Head - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement
Service Magazine
A New Exhaust Valve Is Used for CertainC7 Machine Engines {1100}
A New Exhaust Valve Is Used for CertainC7 Machine Engines {1100}

Caterpillar Parts SIS Catalog 324D :

Truck sale:

 
 
Caterpillar 324D
- Crawler Excavators
ZIEGLER CAT
110,867 
Caterpillar 324D, Crawler Excavators, Construction
- Crawler excavators
FINNING CANADA
64.613 
Caterpillar 324D, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
BERGERAT MONNOYEUR S.A.S.
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.