251-0432 WIRING GP-CAB S/N DFP1-UP; CJX1-UP PART OF 229-9072, 436-9800 OPERATOR AR Type 2 324D EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 251-0432 WIRING GP-
1. 251-0529 WIRING GP-
2. 259-5118 WIRING GP-
3. 267-7642 WIRING GP-
4. 306-8349 WIRING GP-
5. 328-0048 WIRING GP-
6. 364-0349 WIRING GP-
7. 306-8720 WIRING GP-
8. 275-7192 WIRING GP-
9. 275-7192 WIRING GP-
0. INFORMATION

EXCAVATOR 324D EXCAVATOR CJX
324D & 324D L Excavators CJX00001-UP (MACHINE) POWERED BY C7 Engine SEBP4418 324D CJX (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

328-0393 WIRING GP-AUXILIARY CONTROL

251-0432 WIRING GP-CAB

251-0529 WIRING GP-CAB

259-5118 WIRING GP-CAB

267-7642 WIRING GP-CAB

#SEBP44180640

251-0432: WIRING GP-CAB

WIRING GP-CAB

251-0432 WIRING GP-CAB
S/N DFP1-UP; CJX1-UP
PART OF 229-9072, 436-9800 OPERATOR AR
Type 2

i04024920 SEBP4418

For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[1]	STRAP-CABLE
2.	7Y-5505	[2]	SPEAKER AS
			(EACH INCLUDES)
	7Y-3951	[2]	TERMINAL-BLADE (14-GA)
	7Y-3954	[1]	CONNECTOR-PLUG (3-PIN)
3.	9W-0335	[1]	LIGHTER AS-CIGAR (24-VOLT)
			-OR-
	238-2318	[1]	LIGHTER AS-CIGAR (24-VOLT)
4.	099-7127 M	[8]	SCREW-MACHINE (M4X0.7X12-MM)
5.	102-8016	[1]	RESISTOR AS (BACKUP)
6.	113-8490	[22]	FUSE (10-AMPERE)
7.	113-8491	[5]	FUSE (15-AMPERE)
8.	113-8493	[3]	FUSE (25-AMPERE)
9.	116-0210	[4]	BRACKET AS
10.	124-3548	[2]	FUSE (30-AMPERE)
11.	132-1829 Y	[1]	ALARM GP (24-VOLT)(FAULT)
12.	141-2759	[8]	FUSE (5-AMPERE)
13.	161-3128	[1]	RELAY (24-VOLT)(BOOM FLOODLIGHT)
13A.	161-3128	[1]	RELAY (24-VOLT)(CHASSIS LIGHT)
13B.	161-3128	[1]	RELAY (24-VOLT)(CAB FLOODLIGHT)
13C.	161-3128	[1]	RELAY (24-VOLT)(HORN)
13D.	161-3128	[1]	RELAY (24-VOLT)(NEUTRAL START)
13E.	161-3128	[1]	RELAY (24-VOLT)(TRAVEL ALARM)
13F.	161-3128	[1]	RELAY (24-VOLT)(ETHER)
14.	366-4622	[1]	KIT-SERVICE METER (32-VOLT DC)
			(INCLUDES SERVICE METER & FILM)
15.	163-6758	[1]	WIRE AS
16.	167-3593	[1]	STRAP
17.	170-6888	[1]	PULLER-FUSE
18.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(MAIN RELAY)
19.	227-7575	[1]	PANEL-CONTROL (SWITCH)
20.	234-1097	[1]	BRACKET
21.	238-2212	[1]	SWITCH AS-ROCKER (FINE SWING)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[5]	TERMINAL (MALE)
23.	238-2390	[1]	CABLE AS (RED)
	6V-2369 D		CABLE (4-GA, BLACK)(0.3-M)
	9G-4343	[2]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
24.	238-2391	[1]	CABLE AS (PURPLE)
	6V-2369 D		CABLE (4-GA, BLACK)(0.3-M)
	9G-4343	[2]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
25.	245-7760	[8]	INSULATION
26.	251-0637	[1]	INSULATION
27.	259-4883	[1]	ANTENNA AS
28.	350-8251 C	[1]	HARNESS AS-CAB
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
	176-9299	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[111]	STRAP-CABLE
	7Y-3950	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	7Y-3951	[11]	TERMINAL-BLADE (14-GA)
	7Y-3952	[3]	PLUG-CONNECTOR (2-PIN)
	7Y-3955	[2]	CONNECTOR-RECEPTACLE
	7Y-3958	[1]	CONNECTOR-PLUG (6-PIN)
	7Y-3962	[2]	TERMINAL-BULLET (MALE)
	7Y-3963	[11]	TERMINAL-BULLET (FEMALE)
	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
	8T-8737	[22]	PLUG-SEAL
	5P-6271	[1]	CONNECTOR AS
	9W-1951	[1]	RECEPTACLE-CONNECTOR (9-PIN)
	102-7964	[2]	PLUG-CONNECTOR (16-PIN)
	102-7965	[76]	TERMINAL (FEMALE)
	9W-0844	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	111-4816	[1]	PLUG-CONNECTOR (13-PIN)
	116-0255	[1]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM)
	121-1022	[2]	DIODE
	121-1168	[1]	CONNECTOR-RECEPTACLE
	121-1173	[13]	TERMINAL (MALE)
	125-4840	[1]	WEDGE-PLUG LOCK (13-PIN)
	125-4841	[2]	WEDGE-PLUG LOCK (21-PIN)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(65-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
	9X-3402	[15]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8065	[3]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8066	[2]	TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)
	2L-8067	[6]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[3]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8076	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	128-8950	[1]	CONNECTOR-RECEPTACLE
	5P-2321	[1]	TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)
	134-3296	[1]	HOUSING-PLUG
	134-3297	[1]	SEAL
	9X-3401	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	149-5069	[8]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[16]	TERMINAL-BLADE (16-GA TO 20-GA)
	149-5071	[8]	TERMINAL-BLADE (12-GA TO 14-GA)
	153-2602	[5]	RECEPTACLE-CONNECTOR (1-PIN)
	153-2631	[5]	TERMINAL (FEMALE)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	163-6659	[1]	CONNECTOR-PLUG (12-PIN)
	163-6699	[1]	CONNECTOR-PLUG (18-PIN)
	163-6790	[23]	TERMINAL (FEMALE)
	163-6803	[8]	PLUG-CONNECTOR (5-PIN)
	167-3487	[8]	WEDGE-PLUG LOCK (5-PIN)
	167-3630	[1]	CONNECTOR-PLUG
	167-3631	[2]	TERMINAL (FEMALE)
	170-6890	[5]	TERMINAL-BLADE (14-GA)
	170-6891	[22]	TERMINAL-BLADE (16-GA TO 18-GA)
	174-3016	[2]	PLUG AS-CONNECTOR (3-PIN)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	238-2319	[1]	BASE AS (FUSE, RELAY PANEL)
	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
	095-0742 M	[1]	SCREW-MACHINE (M6X1X16-MM)
	170-9394	[40]	TERMINAL
	238-2363	[6]	TERMINAL (FEMALE)
	238-2366	[10]	TERMINAL (MALE)
	239-7356	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4506	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	349-5084	[3]	TERMINAL-BLADE
	349-5085	[3]	RECEPTACLE AS-CONNECTOR
29.	095-0723 M	[3]	SCREW-SPECIAL (M3X0.5X10-MM)
30.	096-5962	[3]	WASHER-HARD (3.4X7X0.8-MM THK)
31.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
32.	132-5789	[7]	CLIP (LADDER)
33.	163-6795	[15]	STRAP-CABLE
34.	4P-7581	[1]	CLIP (LADDER)
35.	5C-2890 M	[3]	NUT (M6X1-THD)
36.	6V-5210 M	[8]	SCREW-MACHINE (M4X0.7X10-MM)
37.	6V-9672 M	[2]	SCREW-MACHINE (M4X0.7X16-MM)
38.	8T-0328	[3]	WASHER-HARD (5.5X10X1-MM THK)
39.	8T-4127 M	[2]	SCREW-MACHINE (M5X0.8X20-MM)
40.	8T-6693 M	[1]	SCREW-MACHINE (M5X0.8X16-MM)
41.	9X-2042 M	[11]	SCREW-TRUSS HEAD (M6X1X12-MM)
42.	9X-2044 M	[5]	SCREW-TRUSS HEAD (M6X1X16-MM)
43.	9X-8256	[3]	WASHER (6.6X12X2-MM THK)
44.	101-2846 E		GUARD (9.5-CM)
44A.	101-2846 E		GUARD (9-CM EACH)
45.	7K-1181 C	[8]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP44180641

251-0529: WIRING GP-CAB

WIRING GP-CAB

251-0529 WIRING GP-CAB
S/N DFP1-UP; CJX1-UP
PART OF 255-5825, 255-5827 CONTROL AR-AUXILIARY
AN ATTACHMENT

i02412854 SEBP4418

For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	7K-1181	[8]	STRAP-CABLE
3.	116-0118	[2]	CLIP
4.	149-5050	[1]	RELAY (24-VOLT)(1-WAY/2-WAY SOLENOID)
5.	251-0598	[1]	HARNESS AS-SOLENOID (1-WAY, 2-WAY FLOW)
	3S-2093	[6]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
6.	5C-2890 M	[1]	NUT (M6X1-THD)
7.	7X-2621 M	[2]	BOLT (M10X1.5X12-MM)
8.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
9.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART

#SEBP44180642

259-5118: WIRING GP-CAB

WIRING GP-CAB

259-5118 WIRING GP-CAB -PRIMING PUMP
S/N DFP1-UP; CJX1-UP
PART OF 247-7458 PUMP GP-FUEL PRIMING
AN ATTACHMENT

i02407779 SEBP4418

For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	7K-1181	[9]	STRAP-CABLE
3.	149-5050	[1]	RELAY (24-VOLT)(PRIMING PUMP)
4.	259-5119	[1]	HARNESS AS-CAB
	3S-2093	[2]	STRAP-CABLE
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
5.	5C-2890 M	[1]	NUT (M6X1-THD)
6.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART

#SEBP44180643

267-7642: WIRING GP-CAB

WIRING GP-CAB

267-7642 WIRING GP-CAB -COUPLER
S/N DFP1-UP; CJX1-UP
PART OF 268-6820 CONTROL AR-COUPLER
AN ATTACHMENT

i02490809 SEBP4418

For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[13]	STRAP-CABLE
2.	149-5050	[1]	RELAY (24-VOLT)(QUICK COUPLER LOCK PRIORITY)
2A.	149-5050	[1]	RELAY (24-VOLT)(QUICK COUPLER LOCK ON)
2B.	149-5050	[2]	RELAY (24-VOLT)(QUICK COUPLER LOCK)
3.	259-4884	[1]	BRACKET AS
4.	259-7220	[1]	COVER
5.	267-7644	[1]	HARNESS AS-QUICK COUPLER
	102-7965	[3]	TERMINAL (FEMALE)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
	149-5070	[9]	TERMINAL-BLADE (16-GA TO 20-GA)
	163-6803	[1]	PLUG-CONNECTOR (5-PIN)
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	7Y-3950	[2]	TERMINAL-BLADE (14-GA TO 20-GA)
	7Y-3953	[1]	CONNECTOR-RECEPTACLE
	149-5069	[7]	TERMINAL-BLADE (14-GA TO 20-GA)
	3S-2093	[15]	STRAP-CABLE
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
6.	267-7671	[1]	SWITCH GP-TOGGLE (QUICK COUPLER)
	105-5175	[1]	SWITCH AS-TOGGLE (QUICK COUPLER)
	3L-8187	[6]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[6]	SCREW-MACHINE (6-32X0.25-IN)
	267-7672	[1]	HARNESS AS-WIRING
	3S-2093	[1]	STRAP-CABLE
	121-1173	[3]	TERMINAL (MALE)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
7.	267-7676	[1]	BRACKET AS
8.	9X-2042 M	[7]	SCREW-TRUSS HEAD (M6X1X12-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP44180644

306-8349: WIRING GP-CAB

WIRING GP-CAB

306-8349 WIRING GP-CAB -GRADE CONTROL
S/N DFP1-UP; CJX1-UP
PART OF 290-1778, 336-3394 CONVERSION AR-MACHINE
AN ATTACHMENT

i02757301 SEBP4418

For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[7]	STRAP-CABLE
2.	113-8491	[1]	FUSE (15-AMPERE)
3.	306-8350	[1]	HARNESS AS-CAB
	3S-2093	[2]	STRAP-CABLE
	8T-8737	[36]	PLUG-SEAL
	9W-0852	[5]	PIN-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
	9X-3402	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[6]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	134-2540	[1]	RESISTOR AS-CONNECTION (3-PIN)
	9X-3401	[32]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[32]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES RECPTACLE AS, WEDGE & INTERFACE SEAL)
	155-2267	[1]	PLUG AS-CONNECTOR (3-PIN)
	170-6891	[2]	TERMINAL-BLADE (16-GA TO 18-GA)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	264-7031	[1]	SEAL-CONNECTOR
	239-7356	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
	272-5000	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	E		ORDER BY THE CENTIMETER

#SEBP44180645

328-0048: WIRING GP-CAB

WIRING GP-CAB

328-0048 WIRING GP-CAB -WORK AREA VISUAL SYSTEM, REAR
S/N DFP1-UP; CJX1-UP
PART OF 329-6570 CAMERA & WIRING GP
AN ATTACHMENT

i03114038 SEBP4418

For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[13]	STRAP-CABLE
2.	7K-1181	[16]	STRAP-CABLE
3.	306-8590	[1]	HARNESS AS-WIRING (WORK AREA VISUAL SYSTEM, REAR)
4.	327-9998	[1]	HARNESS AS-AUXILIARY (WORK AREA VISUAL SYSTEM, REAR)
	3S-2093	[1]	STRAP-CABLE
	7Y-3962	[1]	TERMINAL-BULLET (MALE)
	7Y-3963	[2]	TERMINAL-BULLET (FEMALE)
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER

#SEBP44180646

364-0349: WIRING GP-CAB

WIRING GP-CAB

364-0349 WIRING GP-CAB -OVERLOAD WARNING
S/N DFP1-UP; CJX1-UP
PART OF 359-2564 WARNING AR-OVERLOAD
AN ATTACHMENT

i04829989 SEBP4418

For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	328-0028	[1]	SWITCH AS-ROCKER (OVERLOAD WARNING)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[4]	TERMINAL (MALE)

#SEBP44180647

306-8720: WIRING GP-CAMERA

WIRING GP-CAMERA

306-8720 WIRING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N DFP1-UP; CJX1-UP
PART OF 329-6570 CAMERA & WIRING GP
AN ATTACHMENT

i03112885 SEBP4418

For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[21]	STRAP-CABLE
2.	7K-1181	[6]	STRAP-CABLE
3.	111-4836	[1]	CLIP
4.	268-8643	[1]	CABLE AS (6-M)
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
	M		METRIC PART

#SEBP44180648

275-7192: WIRING GP-CHASSIS

WIRING GP-CHASSIS

275-7192 WIRING GP-CHASSIS -GRADE CONTROL
S/N DFP1-UP; CJX1-UP
PART OF 290-1778 CONVERSION AR-MACHINE
Type 1
AN ATTACHMENT

i02892236 SEBP4418

For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[36]	STRAP-CABLE
2.	239-1844	[2]	SPACER (14X25X70-MM)
3.	275-6841 Y	[1]	HARNESS AS-CONTROL (BODY TILT SENSOR, GPS RECEIVER)
4.	275-6842 Y	[1]	HARNESS AS-CONTROL (DISPLAY, GPS RADIO)
5.	275-7212	[1]	HARNESS AS-CONTROL (POWER MODULE)
	3R-9965	[1]	PLUG AS-CONNECTOR (8-PIN)
	3S-2093	[2]	STRAP-CABLE
	6D-5257	[1]	PLUG AS-CONNECTOR (8-PIN)
	8T-8737	[18]	PLUG-SEAL
	104-6871	[2]	CAP-DUST
	9W-0844	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3402	[32]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[32]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2267	[2]	PLUG AS-CONNECTOR (3-PIN)
	2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	9X-3401	[21]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[21]	PIN-CONNECTOR (14-GA TO 16-GA)
	174-0503	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS,WEDGE & INTERFACE SEALS)
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
			(EACH INCLUDES)
	455-0709	[1]	SEAL-CONNECTOR
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	455-0708	[1]	SEAL-CONNECTOR
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	243-5362	[1]	CAP-DUST
	134-2540	[2]	RESISTOR AS-CONNECTION (3-PIN)
	247-2695	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	272-5000	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	3S-2093	[2]	STRAP-CABLE
	8L-8413	[3]	STRAP-CABLE (WHITE)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(60-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(50-CM)
6.	279-7609	[1]	BRACKET AS
7.	091-9035	[1]	SPACER (11X25X20-MM THK)
8.	132-5789	[1]	CLIP (LADDER)
9.	2S-1647	[1]	GROMMET
10.	4P-7428	[1]	CLIP
11.	4P-7581	[1]	CLIP (LADDER)
12.	7X-2550 M	[2]	BOLT (M12X1.75X110-MM)
13.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
14.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
15.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
16.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP44180649

275-7192: WIRING GP-CHASSIS

WIRING GP-CHASSIS

275-7192 WIRING GP-CHASSIS -GRADE CONTROL
S/N DFP1-UP; CJX1-UP
PART OF 290-1778, 336-3394 CONVERSION AR-MACHINE
Type 2
AN ATTACHMENT

i02892253 SEBP4418

For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181 C	[38]	STRAP-CABLE
3.	275-6841 Y	[1]	HARNESS AS-CONTROL (BODY TILT SENSOR, GPS RECEIVER)
4.	275-6842 Y	[1]	HARNESS AS-CONTROL (DISPLAY, GPS RADIO)
5.	306-8367 C	[1]	HARNESS AS-CONTROL
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3R-9965	[1]	PLUG AS-CONNECTOR (8-PIN)
	3S-2093	[1]	STRAP-CABLE
	6D-5257	[1]	PLUG AS-CONNECTOR (8-PIN)
	8L-8413	[3]	STRAP-CABLE (WHITE)
	8T-8737	[21]	PLUG-SEAL
	104-6871	[2]	CAP-DUST
	9W-0844	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(50-CM)
	9X-3402	[32]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-2540	[1]	RESISTOR AS-CONNECTION (3-PIN)
	9X-3401	[21]	PIN-CONNECTOR (16-GA TO 18-GA)
	174-0503	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS,WEDGES & INTERFACE SEAL)
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
			(EACH INCLUDES)
	264-7034	[1]	SEAL-CONNECTOR
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	264-7033	[1]	SEAL-CONNECTOR
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	243-5362	[1]	CAP-DUST
	253-2695	[1]	PLUG AS-CONNECTOR
	272-5000	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
6.	279-7609	[1]	BRACKET AS
7.	091-9035	[1]	SPACER (11X25X20-MM THK)
8.	132-5789	[1]	CLIP (LADDER)
9.	2S-1647	[1]	GROMMET
10.	4P-7428	[1]	CLIP
11.	4P-7581	[1]	CLIP (LADDER)
12.	7X-2550 M	[2]	BOLT (M12X1.75X110-MM)
13.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
14.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
15.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
16.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery Disconnect Switch
324D and 326D Excavators

Battery or Battery Cable - Inspect/Replace
324D and 326D Excavators

Battery - Recycle
324D and 326D Excavators

Power Receptacle - If Equipped
324D and 326D Excavators

Fuses - Replace
324D and 326D Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Installation Procedure for 251-0529 Cab Wiring Gp on Certain Hydraulic Excavators {1408}
Installation Procedure for 251-0529 Cab Wiring Gp on Certain Hydraulic Excavators {1408}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Installation Procedure of 328-0393 Auxiliary Control Wiring Gp on Certain Excavators{1408}
Installation Procedure of 328-0393 Auxiliary Control Wiring Gp on Certain Excavators{1408}

Installation of the 251-0437 Auxiliary Control Wiring Gp {1408}
Installation of the 251-0437 Auxiliary Control Wiring Gp {1408}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

Master Guide for Field Installation of 438-9059 Auxiliary Control Ar on Certain 324D Excavators{1408, 5051, 5057, 5059, 5063, 7301, 7405, 7557}
Master Guide for Field Installation of 438-9059 Auxiliary Control Ar on Certain 324D Excavators{1408, 5051, 5057, 5059, 5063, 7301, 7405, 7557}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Master Guide for Field Installation of 438-7232 Auxiliary Control Ar on Certain 324D Excavators{1408, 5051, 5057, 5059, 5063, 7301, 7405, 7557}
Master Guide for Field Installation of 438-7232 Auxiliary Control Ar on Certain 324D Excavators{1408, 5051, 5057, 5059, 5063, 7301, 7405, 7557}

Installation Procedure for 468-3798 Wiring Group for Certain Hydraulic Excavators {1408}
Installation Procedure for 468-3798 Wiring Group for Certain Hydraulic Excavators {1408}

Installation of the 468-2117 Hydraulic Ar on Certain Hydraulic Excavators{1408, 5057, 5059}
Installation of the 468-2117 Hydraulic Ar on Certain Hydraulic Excavators{1408, 5057, 5059}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Installation Procedure for the 490-5207 Hydraulic Ar-Worktool on Certain Hydraulic Excavators{1408, 5057, 5059, 6700}
Installation Procedure for the 490-5207 Hydraulic Ar-Worktool on Certain Hydraulic Excavators{1408, 5057, 5059, 6700}

Technical Information Bulletin

The Machine Service Meter Display on Certain Excavators Is Higher than the Machine Running Hours Compared with the Monitor{1408, 7301}
The Machine Service Meter Display on Certain Excavators Is Higher than the Machine Running Hours Compared with the Monitor{1408, 7301}

Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Relays
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Senders
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Sensors
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C7 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Connector - Inspect
AccuGrade^® GPS (CD700)

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS (CD700)

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS (CD700)

Overload Warning - Set - If Equipped
324D and 326D Excavators Hydraulic System

Connector Contact Description
AccuGrade^® GPS (CD700)

Electrical Connector - Inspect
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Connector Contact Description
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

Electrical Power Supply
AccuGrade^® GPS (CD700)

CAN Data Link - Test
AccuGrade^® GPS (CD700)

CAN Data Link - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31

Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/08/18