AIR INLET AND EXHAUST SYSTEM
VALVE GP-CONTROLEXHAUST GP
AIR INLET AND EXHAUST SYSTEM
VALVE GP-CONTROL
#SEBP44192330
299-6271: CONTROL GP-CLEAN GAS INDUCTION
299-6271 CONTROL GP-CLEAN GAS INDUCTION
S/N SDP24965-UP
PART OF 292-1975 CONTROL GP-CLEAN GAS INDUCTION
AN ATTACHMENT
S/N SDP24965-UP
PART OF 292-1975 CONTROL GP-CLEAN GAS INDUCTION
AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-4041 | [1] | ELBOW | |
| 2. | 8T-4986 | [1] | CLAMP-HOSE | |
| 3. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (AIR INLET) | |
| 4. | 286-3112 | [1] | CLAMP AS | |
| 5. | 286-7170 | [1] | HOSE | |
| 6. | 352-4932 CY | [1] | VALVE GP-CLEAN GAS INDUCTION | |
| 7. | 030-7936 | [1] | CONNECTOR | |
| 8. | 214-7568 C | [2] | SEAL-O-RING | |
| 9. | 238-5082 C | [1] | SEAL-O-RING | |
| 10. | 2P-7214 | [1] | ELBOW | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44192331
330-4496: CONTROL GP-CLEAN GAS INDUCTION
330-4496 CONTROL GP-CLEAN GAS INDUCTION
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
#SEBP44192332
330-4497: CONTROL GP-CLEAN GAS INDUCTION
330-4497 CONTROL GP-CLEAN GAS INDUCTION
PART OF 330-4496 CONTROL GP-CLEAN GAS INDUCTION
Type 1
AN ATTACHMENT
PART OF 330-4496 CONTROL GP-CLEAN GAS INDUCTION
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4986 | [1] | CLAMP-HOSE | |
| 2. | 214-7568 | [2] | SEAL-O-RING | |
| 3. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE | |
| 4. | 286-3112 | [1] | CLAMP AS | |
| 5. | 286-7171 | [1] | HOSE | |
| 6. | 298-6258 Y | [1] | VALVE GP-CLEAN GAS INDUCTION | |
| 7. | 008-8381 | [1] | ELBOW | |
| 8. | 2P-7214 | [1] | ELBOW | |
| 9. | 2R-6806 | [1] | CONNECTOR | |
| 10. | 6V-5050 | [1] | SEAL-O-RING | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44192333
330-4497: CONTROL GP-CLEAN GAS INDUCTION
330-4497 CONTROL GP-CLEAN GAS INDUCTION
PART OF 330-4496 CONTROL GP-CLEAN GAS INDUCTION
Type 2
AN ATTACHMENT
PART OF 330-4496 CONTROL GP-CLEAN GAS INDUCTION
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4986 | [1] | CLAMP-HOSE | |
| 2. | 214-7568 | [2] | SEAL-O-RING | |
| 3. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE | |
| 4. | 286-3112 | [1] | CLAMP AS | |
| 5. | 286-7171 | [1] | HOSE | |
| 6. | 352-4932 CY | [1] | VALVE GP-CLEAN GAS INDUCTION | |
| 7. | 008-8381 | [1] | ELBOW | |
| 8. | 2P-7214 | [1] | ELBOW | |
| 9. | 2R-6806 | [1] | CONNECTOR | |
| 10. | 238-5082 C | [1] | SEAL-O-RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44192334
264-8213: COOLER GP-CLEAN GAS INDUCTION
264-8213 COOLER GP-CLEAN GAS INDUCTION
S/N SDP1-401
FOR USE WITH ALL ENGINES
ALSO AN ATTACHMENT
S/N SDP1-401
FOR USE WITH ALL ENGINES
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9U-6995 | [1] | FITTING GP-HYDRAULIC | |
| 1A. | 2S-4078 | [1] | SEAL-O-RING | |
| 2. | 235-1088 | [1] | NUT (3/8-16-THD) | |
| 3. | 272-1786 | [1] | TUBE AS | |
| 4. | 272-7149 | [1] | HOSE | |
| 5. | 279-6471 Y | [1] | COOLER GP-CLEAN GAS INDUCTION (LOW PRESSURE LOOP) | |
| 6. | 279-8982 | [1] | TUBE | |
| 7. | 280-8911 | [2] | CLAMP-BAND | |
| 8. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 9. | 1B-2790 | [1] | BOLT (5/16-18X1.375-IN) | |
| 10. | 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | |
| 11. | 216-9528 | [1] | WASHER-HARD (7X19X2-MM THK) | |
| 12. | 2A-0762 | [1] | BOLT (1/4-20X0.625-IN) | |
| 13. | 4F-5607 | [2] | SEAL-O-RING | |
| 14. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 15. | 6V-9027 | [1] | SEAL-O-RING | |
| 16. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 9S-8002 | [1] | PLUG (7/16-20-THD)(STRAIGHT THREAD O-RING) | |
| 18. | 9X-7684 | [1] | SEAL-O-RING | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44192335
264-8213: COOLER GP-CLEAN GAS INDUCTION
264-8213 COOLER GP-CLEAN GAS INDUCTION
S/N SDP402-499
FOR USE WITH ALL ENGINES
ALSO AN ATTACHMENT
S/N SDP402-499
FOR USE WITH ALL ENGINES
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9U-6995 | [1] | FITTING GP-HYDRAULIC | |
| 1A. | 2S-4078 | [1] | SEAL-O-RING | |
| 2. | 235-1088 | [1] | NUT (3/8-16-THD) | |
| 3. | 272-1786 | [1] | TUBE AS | |
| 4. | 272-7149 | [1] | HOSE | |
| 5. | 279-6471 Y | [1] | COOLER GP-CLEAN GAS INDUCTION (LOW PRESSURE LOOP) | |
| 6. | 279-8982 | [1] | TUBE | |
| 7. | 280-8911 | [2] | CLAMP-BAND | |
| 8. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 9. | 1B-2790 | [1] | BOLT (5/16-18X1.375-IN) | |
| 10. | 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | |
| 11. | 9N-0869 C | [1] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 12. | 2A-0762 | [1] | BOLT (1/4-20X0.625-IN) | |
| 13. | 4F-5607 | [2] | SEAL-O-RING | |
| 14. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 15. | 6V-9027 | [1] | SEAL-O-RING | |
| 16. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 9S-8002 | [1] | PLUG (7/16-20-THD)(STRAIGHT THREAD O-RING) | |
| 18. | 9X-7684 | [1] | SEAL-O-RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44192336
264-8213: COOLER GP-CLEAN GAS INDUCTION
264-8213 COOLER GP-CLEAN GAS INDUCTION
S/N SDP500-516
FOR USE WITH ALL ENGINES
ALSO AN ATTACHMENT
S/N SDP500-516
FOR USE WITH ALL ENGINES
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9U-6995 | [1] | FITTING GP-HYDRAULIC | |
| 1A. | 2S-4078 | [1] | SEAL-O-RING | |
| 2. | 235-1088 | [1] | NUT (3/8-16-THD) | |
| 3. | 290-2241 C | [1] | TUBE AS | |
| 4. | 272-7149 | [1] | HOSE | |
| 5. | 279-6471 Y | [1] | COOLER GP-CLEAN GAS INDUCTION (LOW PRESSURE LOOP) | |
| 6. | 279-8982 | [1] | TUBE | |
| 7. | 280-8911 | [2] | CLAMP-BAND | |
| 8. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 9. | 1B-2790 | [1] | BOLT (5/16-18X1.375-IN) | |
| 10. | 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | |
| 11. | 9N-0869 | [1] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 12. | 2A-0762 | [1] | BOLT (1/4-20X0.625-IN) | |
| 13. | 4F-5607 | [2] | SEAL-O-RING | |
| 14. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 15. | 6V-9027 | [1] | SEAL-O-RING | |
| 16. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 9S-8002 | [1] | PLUG (7/16-20-THD)(STRAIGHT THREAD O-RING) | |
| 18. | 9X-7684 | [1] | SEAL-O-RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44192337
279-6471: COOLER GP-CLEAN GAS INDUCTION
279-6471 COOLER GP-CLEAN GAS INDUCTION -INDUCTION
PART OF 264-8213 COOLER GP-CLEAN GAS INDUCTION
ALSO AN ATTACHMENT
PART OF 264-8213 COOLER GP-CLEAN GAS INDUCTION
ALSO AN ATTACHMENT
For full view, you need register
#SEBP44192338
286-9384: COOLER GP-CLEAN GAS INDUCTION
286-9384 COOLER GP-CLEAN GAS INDUCTION
S/N SDP412-537
ALSO AN ATTACHMENT
S/N SDP412-537
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9U-6995 | [1] | FITTING GP-HYDRAULIC (CLEAN GAS INDUCTION) | |
| 2S-4078 | [1] | SEAL-O-RING | ||
| 2. | 235-1088 | [1] | NUT (3/8-16-THD) | |
| 3. | 272-7149 | [1] | HOSE | |
| 4. | 280-8911 | [2] | CLAMP-BAND | |
| 5. | 286-1158 | [1] | COOLER GP-CLEAN GAS INDUCTION (LOW PRESSURE LOOP) | |
| 6. | 286-9411 | [1] | TUBE AS | |
| 7. | 290-2241 | [1] | TUBE AS | |
| 8. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 9. | 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | |
| 10. | 1B-2790 | [1] | BOLT (5/16-18X1.375-IN) | |
| 11. | 2A-0762 | [1] | BOLT (1/4-20X0.625-IN) | |
| 12. | 3H-1461 | [1] | SEAL-O-RING | |
| 13. | 4F-5607 | [1] | SEAL-O-RING | |
| 14. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 15. | 6V-9027 | [1] | SEAL-O-RING | |
| 16. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 9N-0869 | [1] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 18. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 19. | 9X-7684 | [1] | SEAL-O-RING |
#SEBP44192339
286-9384: COOLER GP-CLEAN GAS INDUCTION
286-9384 COOLER GP-CLEAN GAS INDUCTION
S/N SDP538-1141
ALSO AN ATTACHMENT
S/N SDP538-1141
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9U-6995 | [1] | FITTING GP-HYDRAULIC (CLEAN GAS INDUCTION) | |
| 2S-4078 | [1] | SEAL-O-RING | ||
| 2. | 235-1088 | [1] | NUT (3/8-16-THD) | |
| 3. | 272-7149 | [1] | HOSE | |
| 4. | 280-8911 | [2] | CLAMP-BAND | |
| 5. | 286-1158 | [1] | COOLER GP-CLEAN GAS INDUCTION (LOW PRESSURE LOOP) | |
| 6. | 299-7632 Y | [1] | LINES GP-WATER (PRECOOLER) | |
| 7. | 290-2241 | [1] | TUBE AS | |
| 8. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 9. | 1A-5964 C | [1] | BOLT (3/8-16X4.5-IN) | |
| 10. | 1B-2790 | [1] | BOLT (5/16-18X1.375-IN) | |
| 11. | 2A-0762 | [1] | BOLT (1/4-20X0.625-IN) | |
| 12. | 3H-1461 | [1] | SEAL-O-RING | |
| 13. | 4F-5607 | [1] | SEAL-O-RING | |
| 14. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 15. | 6V-9027 | [1] | SEAL-O-RING | |
| 16. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 9N-0869 | [1] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 18. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 19. | 9X-7684 | [1] | SEAL-O-RING | |
| 20. | 4P-8134 C | [1] | CLIP (LADDER) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
AIR INLET AND EXHAUST SYSTEM
VALVE GP-CONTROL
Special Instruction
Inspecting and Repairing the Air Inlet and Exhaust System After Improper Fueling{1000, 1052, 1053, 1061, 1087}
Inspecting and Repairing the Air Inlet and Exhaust System After Improper Fueling{1000, 1052, 1053, 1061, 1087}
Inspecting and Repairing the Air Inlet and Exhaust System After Improper Fueling{1000, 1052, 1053, 1061, 1087}
Procedure for Cleaning Soot from the Engine after a Failure of the Diesel Particulate Filter (DPF) {1052, 1053, 1061, 1063, 1087, 108C, 108N}
Procedure for Cleaning Soot from the Engine after a Failure of the Diesel Particulate Filter (DPF) {1052, 1053, 1061, 1063, 1087, 108C, 108N}
Procedure for Cleaning Soot from the Engine after a Failure of the Diesel Particulate Filter (DPF) {1052, 1053, 1061, 1063, 1087, 108C, 108N}
A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130}
A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130}
A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130}
Technical Information Bulletin
Information on the Clean Gas Induction (CGI) Flex Pipe Connection Found Broken in Some 2007 Emissions Compliant Engines{1071, 108N, 5510}
Information on the Clean Gas Induction (CGI) Flex Pipe Connection Found Broken in Some 2007 Emissions Compliant Engines{1071, 108N, 5510}
Information on the Clean Gas Induction (CGI) Flex Pipe Connection Found Broken in Some 2007 Emissions Compliant Engines{1071, 108N, 5510}
Specifications
Troubleshooting
Disassembly and Assembly
