230-4175 PUMP GP-METERING -HMU S/N JAN1-UP PART OF 139-5953, 267-8616 LINES GP-STEERING IT38G II INTEGRATED TOOLCARRIER

Pos.	Part No	Qty	Parts name
1.	6E-6484	[1]	HEAD
2.	9F-2247	[1]	PLUG-PIPE
3.	9T-3867	[1]	SPRING
4.	9T-1710	[1]	POPPET
5.	9T-1636	[1]	SEAT
6.	103-1260 C	[2]	CONE-BEARING
7.	004-1963 C	[2]	SEAL-O-RING
8.	103-1262 C	[2]	BEARING-CUP
9.	9T-2003	[1]	RING
10.	031-0216 C	[8]	BOLT (1/4-20X0.75-IN)
11.	143-9686 C	[1]	HOUSING-PUMP
12.	102-2252 C	[2]	COVER-PINTLE
13.	5P-0076	[6]	BOLT-12 POINT HEAD (3/8-16X1.5-IN)
14.	9T-1752	[1]	GASKET
15.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
16.	2M-9780	[1]	SEAL-O-RING
17.	8T-5089	[2]	PIN-SPRING
18.	7L-0688	[4]	BOLT-SOCKET HEAD (10-24X1.2-IN)
19.	107-9530 Y	[1]	VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)
20.	9T-8248 Y	[1]	ROTATING GP-PUMP
21.	102-2253 C	[1]	YOKE
22.	6E-6481	[1]	SHAFT
23.	002-3455	[1]	RING-RETAINING
24.	3E-6748	[1]	SEAL-LIP TYPE
25.	7T-9755	[1]	CUP-BEARING
26.	7T-9754	[1]	CONE-BEARING
27.	9T-2000	[1]	KIT-SPACER
28.	9T-8251	[1]	PLATE
29.	9T-2001	[1]	PIN
30.	7T-9753	[1]	CUP-BEARING
31.	7T-9752	[1]	CONE-BEARING
32.	9T-2173	[1]	SEAT
33.	8J-8308	[1]	PIN-ROLL
34.	9T-2168	[1]	SPRING
35.	9T-2171	[1]	SEAT
36.	9T-2172	[1]	PISTON
37.	033-6028	[1]	SEAL-O-RING
38.	100-4230	[1]	ROD-CONTROL
39.	100-4231	[1]	CONNECTOR
40.	8F-9206	[2]	SEAL-O-RING
41.	9T-2002	[1]	GASKET
42.	5F-9144	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP44220462

9T-8248: ROTATING GP-PUMP

ROTATING GP-PUMP

9T-8248 ROTATING GP-PUMP -STEERING
S/N JAN1-UP
PART OF 107-9532 PUMP GP-PISTON

i00192409 SEBP4422

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9T-8249	[1]	KIT-PISTON
2.	9T-3860	[1]	PLATE
3.	9T-3859	[1]	WASHER (1.068X1.139X0.099-MM THK)
4.	9T-3862	[1]	RETAINER
5.	9T-3857	[3]	PIN
6.	9T-8250	[1]	BARREL
7.	9T-3861	[1]	WASHER (1.062X1.58X0.095-MM THK)
8.	9T-3858	[1]	SPRING
9.	9T-3864	[1]	WASHER (1.2X1.58X0.095-MM THK)
10.	004-1683	[1]	RING-SNAP

#SEBP44220463

204-0835: STEERING AR-SECONDARY

STEERING AR-SECONDARY

204-0835 STEERING AR-SECONDARY
S/N JAN1-UP
CANNOT BE USED WITH 227-4777 ACTUATOR AR-POWER GUARD
AN ATTACHMENT

i01818999 SEBP4422

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Part No	Qty	Parts name
203-8464 Y	[1]	FRAME AS-REAR
212-4266 Y	[1]	LINES GP-SECONDARY STEERING
216-9559 Y	[1]	PUMP & MTG GP-SECONDARY STEER
201-8416 Y	[1]	WIRING GP-SECONDARY STEERING
143-2471	[1]	SHEET AS
8T-3490 M	[5]	NUT-WELD (M10X1.5-THD)
143-2472	[1]	SHEET AS
8T-3490 M	[3]	NUT-WELD (M10X1.5-THD)
185-2768	[1]	SWITCH AS-ROCKER (SECONDARY STEERING)
111-7899	[1]	GASKET
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP44220464

267-8613: STEERING AR-SECONDARY

STEERING AR-SECONDARY

267-8613 STEERING AR-SECONDARY
S/N JAN1-UP
PART OF 260-0147 CONVERSION AR-CERTIFICATION
AN ATTACHMENT

i02485298 SEBP4422

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Part No	Qty	Parts name
267-8612 Y	[1]	FRAME AS-REAR
212-4266 Y	[1]	LINES GP-SECONDARY STEERING
216-9559 Y	[1]	PUMP & MTG GP-SECONDARY STEER
201-8416 Y	[1]	WIRING GP-SECONDARY STEERING
143-2471	[1]	SHEET AS
8T-3490 M	[5]	NUT-WELD (M10X1.5-THD)
143-2472	[1]	SHEET AS
8T-3490 M	[3]	NUT-WELD (M10X1.5-THD)
185-2768	[1]	SWITCH AS-ROCKER (SECONDARY STEERING)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP44220465

319-1625: STEERING COLUMN GP-ADJUSTABLE

STEERING COLUMN GP-ADJUSTABLE

319-1625 STEERING COLUMN GP-ADJUSTABLE
S/N JAN1-UP
FIELD REPLACEMENT FOR @@@@@201-4825@@@@@

i03031781 SEBP4422

3191625 STEERING COLUMN GP-ADJUSTABLE Parts scheme

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9G-3695	[1]	PLUG-SEAL
2.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
3.	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
4.	149-0777	[1]	KNOB (STEERING COLUMN TILT)
5.	319-9510	[1]	SPRING AS-GAS (STEERING COLUMN)
6.	217-4155	[1]	KIT-TILT LEVER (STEERING COLUMN)
			(INCLUDES BOLTS, DOWEL, ROLL PIN, SPRING & TILT LEVER)
7.	332-6884	[1]	KIT-CONTACT (HORN)
			(INCLUDES HORN CONTACT AS & SCREWS)
8.	321-6951	[1]	KIT-PIVOT (STEERING COLUMN TILT)
			(INCLUDES PINS & BUSHINGS)
9.	311-8557	[1]	COLUMN AS-STEERING
10.	6V-8227 M	[1]	NUT (M18X1.5-THD)
	M		METRIC PART

#SEBP44220466

107-9530: VALVE GP-PUMP CONTROL

VALVE GP-PUMP CONTROL

107-9530 VALVE GP-PUMP CONTROL -STEERING-PRESSURE, FLOW COMPENSATOR
S/N JAN1-UP
PART OF 107-9532 PUMP GP-PISTON

i00192525 SEBP4422

1079530 VALVE GP-PUMP CONTROL Parts scheme

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9S-8002	[1]	PLUG (7/16-20-THD)
2.	3J-7354	[1]	SEAL-O-RING
3.	9T-7062	[1]	BODY
4.	3J-6021	[3]	PLUG
5.	6E-0231	[1]	SEAT-CHECK VALVE
6.	3E-4354	[1]	BALL
7.	9T-3809	[1]	SPOOL
8.	9T-3810	[1]	SEAT
9.	9T-6858	[1]	SPRING
10.	9T-3812	[1]	SEAT
11.	8T-7931	[1]	SETSCREW (1/2-20-THD)
12.	1J-9671	[1]	SEAL-O-RING
13.	9S-8003	[1]	PLUG (1/2-20-THD)
14.	9T-3813	[1]	PLUG
15.	5L-4758	[1]	SEAL-O-RING
16.	9T-3814	[1]	SPRING
17.	9T-3815	[1]	SEAT
18.	9T-3816	[1]	SPOOL
19.	2S-9600	[1]	DOWEL
20.	7L-8316	[1]	SETSCREW-SOCKET (10-32X2.54-IN)

#SEBP44220467

6E-3447: VALVE GP-RELIEF

VALVE GP-RELIEF

6E-3447 VALVE GP-RELIEF -PUMP BACKUP-PUMP BACKUP
S/N JAN1-UP
PART OF 9T-7420 VALVE GP-STEERING

i00192359 SEBP4422

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7X-4776	[2]	RING-BACKUP
2.	8C-3097	[1]	SEAL-O-RING
3.	3K-0360	[1]	SEAL-O-RING

#SEBP44220468

141-2597: VALVE GP-SECONDARY STEERING

VALVE GP-SECONDARY STEERING

141-2597 VALVE GP-SECONDARY STEERING
S/N JAN1-UP
PART OF 212-4266 LINES GP-SECONDARY STEERING
AN ATTACHMENT

i00717531 SEBP4422

1412597 VALVE GP-SECONDARY STEERING Parts scheme

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2S-2596	[2]	SPRING
2.	100-8010	[2]	VALVE-CHECK
3.	368-2318	[2]	PLUG AS
			(EACH INCLUDES)
3A.	368-2317	[1]	PLUG
3B.	368-2319	[1]	BUSHING
4.	1P-4577	[4]	FLANGE-HALF
5.	3J-7479	[1]	COVER
6.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
7.	4J-0519	[1]	SEAL-O-RING
8.	8T-4196 M	[8]	BOLT (M10X1.5X35-MM)
9.	8T-4121 B	[12]	WASHER-HARD (11X21X2.5-MM THK)
10.	7M-8485	[2]	SEAL-O-RING
11.	5J-2722 B	[8]	SHIM (1.22-MM THK)

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP44220469

9T-7420: VALVE GP-STEERING

VALVE GP-STEERING

9T-7420 VALVE GP-STEERING
S/N JAN1-UP
PART OF 139-5953, 267-8616 LINES GP-STEERING

i00192405 SEBP4422

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9T-7421 Y	[1]	VALVE GP-STEERING
2.	8T-6466 M	[2]	BOLT (M10X1.5X60-MM)
3.	8F-9206	[7]	SEAL-O-RING
4.	8T-4196 M	[18]	BOLT (M10X1.5X35-MM)
5.	5J-2974	[2]	SEAL-O-RING
6.	2S-2596	[4]	SPRING
7.	4B-9782	[4]	BALL
8.	183-7263	[1]	PLUG AS
	9S-8002	[1]	PLUG (7/16-20-THD)
	3J-7354	[1]	SEAL-O-RING
11.	148-8411	[1]	PLUG AS
	9S-4185	[1]	PLUG (3/4-16-THD)
	3K-0360	[1]	SEAL-O-RING
12.		[1]	PLUG AS
	3D-2824	[1]	SEAL-O-RING
13.	3J-1907	[2]	SEAL-O-RING
14.	6E-3447 Y	[1]	VALVE GP-RELIEF (PUMP BACKUP)
16.	8C-3206	[8]	FLANGE-HALF
17.	9S-6154	[2]	PLUG AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	5H-3193	[1]	PIN-SPRING
18.	9T-7220	[1]	COVER
19.	4J-0520	[1]	SEAL-O-RING
20.	8T-4121	[16]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-5005 M	[4]	BOLT (M10X1.5X70-MM)
22.	9T-7419	[1]	VALVE GP-RELIEF (STEERING CYLINDER CROSSOVER)
	2M-9780	[1]	SEAL-O-RING
	5P-2199	[2]	RING-BACKUP
	6E-0410	[1]	SEAL-O-RING
23.	6E-5397	[1]	VALVE GP-SELECTOR (STEERING)
	3K-0360	[2]	SEAL-O-RING
	5H-3193	[2]	PIN-SPRING
24.	6E-2508	[1]	PLUG-ORIFICE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION